Cisco :: Backup LMS 4.01 Don't Run
Oct 18, 2011
After the upgrade of LMS 3.2 to LMS 4.01 everthing works. After i fixed my last problem (syslog time issue). I´d saw that the automated system backup doesn´t work. I´d tried to backup the system by script. Than i find out that the perl.exe is damaged (0KB). So than i copied the perl.exe from my old Cisco Works Server to the new Server. Than i tried to make a Backup and get the mentiond error ...
D:CiscoWorksCSCOpxin>perl.exe D:CiscoWorksCSCOpxinackup.pl d:Temp
ew
install
************************************************************
Backup to 'd:/Temp/newinstall' started at: [Wed Oct 19 09:39:50 2011]
[Wed Oct 19 09:39:50 2011] ERROR(375): No database files are available for the
installed applications; nothing to back up.
[Wed Oct 19 09:39:50 2011] Backup failed: 2011/10/19 09:40:00
[code]....
View 1 Replies
ADVERTISEMENT
Jan 10, 2013
Why does Cisco recommend a configuration of originate-only on the ASA with multiple peers configured and the answer-only to the other end? Shouldn't it work as Bi-Directional ?
[URL]
The only scenario I see which could break is if both peers try to establish a VPN at the same time to the ASA. Is there any other reason ?
View 0 Replies
View Related
Nov 21, 2012
1)how can i backup the configuration on cisco lms 4.2 and to re-imported later when i re-install the lms 4.2
2)how can i change the admin password on cisco lms 4.2
View 3 Replies
View Related
May 5, 2011
One of my branch offices is connected to an ADSL line as well as a VDSL line.Since I really don't need the ADSL line I came up with the idea to use it as a backup line.So I searched google and found this nice little article URL. I wonder if the router will switch back to the primary ISP if the primary line comes up again?
View 3 Replies
View Related
Nov 21, 2012
Any one see the pronl;em where LMS 4.2.2 cannot backup an ASA 5525-X (UKHSL-N01-AFW02)..The Inventory collection is fine, to a point.I have applied all updates LSM etc. [code]
View 7 Replies
View Related
May 3, 2006
I am trying to create a VBR soft pvc across a T3 and T1 backup link, but I am confused about what values to use for PCR, SCR and MCR. If I use high values for the T3, what will happen when this link is down and the soft PVC reroutes across the T1? I would like to use percents (%) for the values, i.e. voice can use 25% of the link, then it would make more sense when using the backup T1 link.
View 2 Replies
View Related
Nov 21, 2012
if i enable Controller Configuration Backup is that included in the server backup? and can the controller configs be specifically extracted from the server backup?
View 8 Replies
View Related
Apr 11, 2012
We have cisco works LMS 3.1 and the server have very problems, we need format the server and reinstall the Cisco Works, when I doin backup and restore of data LMS We lost the licenses? or when we restore the data in the server we have the same licenses? or get the new licenses to cisco?
View 5 Replies
View Related
May 31, 2012
at the moment I have a 888 router that works fine, I want to configure backup (I already have configure ISDN backup but the performance it's to poor), and I want to use an other router 887 (that I already have) with adsl.
My idea is to configure the second router as stand alone gateway, and confiure in the first router a "ip route 0.0.0.0 0.0.0.0 VLAN1 192.168.0.253 100".But I know that this second route is used only in case the interface status of primary route goes down but not in case fault only protocol.
configure a better routing or faulting procedure?
-----------------------------------
888
VLAN1 192.168.0.254
ATM0.1 1.1.1.1
ip route 0.0.0.0 0.0.0.0 ATM0.1
ip route 0.0.0.0 0.0.0.0 VLAN1 192.168.0.253 100
-----------------------------------
887
VLAN1 192.168.0.253
ATM0.1 2.2.2.2
ip route 0.0.0.0 0.0.0.0 ATM0.1
-----------------------------------
View 3 Replies
View Related
Feb 11, 2013
implement backup WAN links to complement the metro Ethernet links we currently use so we have some redundancy. These will most likely be a VPN over an Internet service but might be another Ethernet type service, the medium shouldn't really matter I wouldn't think. What I am looking for input on is what is the best way to implement this? Would I just set costs so that the backup is only used when the primary goes down, or should I create new OSPF area for the backup links?
Currently the core switches that are also our routers are 3750G stacks running ip services. We are getting ready to install new firewalls at each location that will become the gateways for the vlans currently on the core switches to give us much more control over segmentation, and because of this I am thinking that it may make sense to then move the OSPF instance from the core to the firewalls. In the drawing I did not show the access layer switches off of the core, and the MOE circuits actually terminate into a 3550-12T switch before the core. I think I will actually eliminate those 3550-12T switches and go straight into the core. This is a current state drawing, so does not include the backup links I am planning.
View 4 Replies
View Related
Feb 18, 2011
want to connect three networks with each other via two media one ethernet/fiber optic and other through wireless as backup link.how can i connect these three networks so that if my ethernet/ fiber optic connection fails than computer on networks can still communcate via wireless link (i mean if ethernet/fiber optic fails then wireless link should automatically be established/
View 1 Replies
View Related
Jan 18, 2013
Platform: LMS 3.2.1 with RME 4.3.2 on Windows 2003.I'm having a problem with several devices that were backing up fine until this week - suddenly they aren't backing up their running configurations, but RME is fetching their startup configurations fine and VTP backups are fine. At first I thought it might be timeouts, so I used inline edit to incease the telnet timeout for a device to 180s. However, the job fails well within this time period (debug shows on i/o error?). My order of protocols is SSH, Telnet, TFTP. I took a stab in the dark that this suggested a database problem so I picked one at random and deleted it from DCR, and readded it and it worked. However, for the other 48 devices affected it did not.
I'm wondering if I need to do anything to the RME database to get things back to where they were? Do I need to reinitialize the RME database, and if I do that what do I lose? [code]
View 2 Replies
View Related
Nov 27, 2011
I tried to backup ACS 5.1 but i found error messages as below
acs backup25Nov11 repository 25Nov11Repository
% Repository not found
% Error: Invalid repository name 25Nov11Respository
Please use a configured repository.
View 2 Replies
View Related
Jun 8, 2012
How to backup the configuration on cisco acs 5.2 and how to restore it , if some thing wrong happened
View 7 Replies
View Related
Dec 9, 2012
I have an ASA 5510 running 8.4 with dual ISPs setup on 2 different interfaces: outside(primary),backup(backup). I also have a site to site VPN to another ASA in another city. The VPN is now setup on the outside interface and works fine. What I wanted to do is to make the VPN run over the backup interface only.
So, I modified the the crypto map on the remote side to use the backup interface IP and created a tunnel-group for it. I then created a crypto map for the backup interface and enabled ikev1 on it. The default route is set to use the outside interface so I created a static route that routes traffic bound for the outside interface on the remote side to the backup interface default gateway. I can get the tunnels to establish but no traffic is passing through them. I though then that I need a NAT for the tunnel traffic to I created a NAT as well but still no traffic passed. I tried the packet-tracer and it said the traffic was allowed and from the show crypto ipsec sa command I can see the tunnel setup but no traffic will go across it.
View 5 Replies
View Related
Mar 10, 2013
Cisco ACS 5.x appliance?How to back up Config?What is best way, via TFTP? COPY Startup-config tftp:?COPY Running-config tftp:?I currently use Solarwinds CatTolls to back my Cisco Switches, can I use this for Cisco ACS also?
View 3 Replies
View Related
Nov 29, 2012
How to backup the configuration of Cisco devices managed by LMS 4.2 and store it in Folder , than restore it once it need it
View 10 Replies
View Related
Aug 21, 2012
I am facing a failed issue when restoring the WCS Database. Below is the error i get, does any one out there facing it before?
#######################################
[root@egwgwcs WCS7.0.220.0]# ./Restore
Please enter the full path of the backup file name: /opt/WCS7.0.220.0/Backup_File/WCS_Aug2012.nmsbackup
Untaring the backup file...
Failed to untar backup file. Exception: invalid stored block lengths
Restore database failed.
#######################################
View 1 Replies
View Related
May 19, 2013
we have ACS 4.1 appliance and will do upgrade to 4.2. We need backup user database and system settings.via Gui I am not sure what all we backed up - dmp file seems to be only encrypted user databse but it can be crypted back up file.
How is possible do complete backup of current machine (user database and system config)? Is it possible via Gui or has to be done CLI access?After upgrade will be on machine previous config and database or or will be appliance completelly re-imaged?
View 1 Replies
View Related
Nov 22, 2010
I am trying to create a backup tunnel from an ASA 5505 to a pix 501 in the case of the Main ISP failing. The Pix external side will stay the same, but not quite sure how I can create a new crypto map and have it use the Backup ISP interface without bringing down the main tunnel.
My first thought was to add the following crypto map to the configuration below: [code]
View 5 Replies
View Related
Jan 8, 2012
I want to restore a backup from c2960 to other one.Why is recommended to remove any security commands, like AAA?
View 2 Replies
View Related
May 8, 2012
I am working with a client that currently has an ASA 5505 with two ISPs for failover using a tracked interface. I would like to configure logging so that the ASA will email us when the Primary ISP goes down and fails over to the backup. Here is what I have so far...
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
[code]....
The primary interface is Outside and the backup is obviously Backup
View 2 Replies
View Related
May 26, 2013
I try to create a reposiroty for FTP Backup but it is not working with directories. Isn't it possible to create FTP repositories with directories?
I need to ad this URL e.g.: ftp://server/IT/Wi-Fi/Backup
This is not working. % Error reading directory on remote server
It works only when I add only the server. ftp://server/
Is there any way to add directories to the URL? Or what is wrong in my thought?
I think to use NFS but I'm not sure if that way is better as FTP, because FTP is default
View 4 Replies
View Related
Oct 20, 2011
I've been setting up building and testing our new ACS 5.x boxes and I've been running into a spot of bother with the backup restore feature. This most likely due to my unfamiliarity with the tool.
As part of my testing for Backup/Restore, I first backup the data using the Removal and backup tool in Secure ACS View (found under data management. I then confirm that the new FULL backup has been populated my test repository and is available in the restore feature. (also under Data Management) My next step is to create a few test Network Device Groups, Identity groups, and users Then I go back to the restore feature select the Back up file I just created, I also check the box Skip View Database backup before Restore and hit the restore button.
The box goes through the expected steps including a reload. When it comes back up I would expect the test users, groups etc I created after the last backup to be gone as they did not exist at that time. Although I find the opposite is true. Any settings I made after the last backup are still present. I do not have incremental backups enabled.
I essentially want to test a backup of the database of users and groups/rules etc make changes and then restore that database to the previous backed up configuration.
View 2 Replies
View Related
Jun 24, 2012
LMS installed on Windows 2003. Backup fais with message "Backup failed.ERROR(1297): Fatal error: Database engine 'UPMDbEngine' could not be started on database 'upm' in Bulk mode.."
dbbackup.log attached.
View 9 Replies
View Related
Jun 4, 2012
Backup failed on 2012/06/03 at 22:02:52. REASON: Unable to proceed with the backup operation as some files are being accessed by jobs. Reschedule the jobs such that the backup job does not coincide with other jobs.
Randomly the backup for lms 4.2 is failing. it has suceeded but majority of the time its failing. i have tried changing times but nothing seems to work. previously we were running 4.0.1 and had noproblems with the backup time.
Just found the bug
CSCtz29665
URL
View 14 Replies
View Related
Sep 4, 2011
I have ACS 5.2 in standalone mode in operation and need not incorporating a second server for high availability ACS, the new ACS is a version 5.1
What should I do first, upgrade the ACS version 5.2 and created the high availability or high availability and get up after the upgrade?
View 2 Replies
View Related
Jan 29, 2013
Currently we have 20 remote sites, each with 2-5 AP's each. They all connect back to our Main Data Site in the US and register on a single WLC5508.
We do not have a backup WLC, but are looking to purchase one. What I would like to know is, are there any problems with the secondary WLC being installed in our Main Data Site in Europe? These two main sites are connected via a 10M MPLS WAN.
So all the remote sites could still connect to the WLC in the US, but in the event of a WLC failure in the US, they would need to fail over to the site in Europe
View 5 Replies
View Related
Apr 4, 2013
we are running Prime NCS 1.1.1.124 and we want to upgrade to PI1.3. I installed the point patch which worked well. after the point patch i wanted to start a backup which can be imported to the new PI1.3 appliance. but i cant do any backups anymore. no on localdisk, not on a remote repository. i was doing 3 backups (2 local disk, one remote ftp disk with the same output) with "debug backup-restore all". output follows.
/admin# 7 [4508]: backup-restore:backup: br_backup.c[431] [daemon]: initiating application component backup backup-20130405-0913 to repos defaultRepo
7 [4508]: backup-restore:backup: br_backup.c[454] [daemon]: no staging url defined, using local space
7 [4508]: backup-restore:backup: br_backup.c[41] [daemon]: flushing the staging area
7 [4508]: backup-restore:backup: br_backup.c[477] [daemon]: creating /opt/backup/backup-backup-20130405-0913-1365196396(code)
View 6 Replies
View Related
Sep 13, 2011
I have Cisco works LMS 3.2. When i take manual backup, it hits following error,
ERROR(1101): Database dfmInvDb backup failed.
Validation e:/backup_newdfmdatabasedfmInv.db failed.
[Wed Sep 14 15:53:41 2011] Validation e:/backup_newdfmdatabasedfmInv.db failed Validation e:/backup_newdfmdatabasedfmInv.db failed. [Wed Sep 14 15:53:41 2011] Validation e:/backup_newdfmdatabasedfmInv.db failed.
View 4 Replies
View Related
Jan 3, 2013
I have the need to configure a backup VPN, I have remote branches with cisco 800 routers that make a VPN to an ASA5510 in the main offices, but as a DRP I want to have a backup VPN to another site. I dont know if it is a failover configuration or backup VPN, how to start investigating.
View 2 Replies
View Related
Mar 9, 2012
We want to take the current configuration backup of the LMS 4.0 (Installed on Win 2003 Enterprise) and restore the same to a new windows machine (Win2003 standard edition).
View 1 Replies
View Related
May 3, 2011
I periodically have my ISP's DNS go out. I actually prefer to use the default DNS they provide (and not hard-code it), but still, it occasionally goes-out for an hour from time-to-time.Is there a way on the DIR-825 to add a "backup" DNS (3rd DNS), that is fed to the PeeCees via DHCP, in addition to the 2 my ISP provides?
View 3 Replies
View Related
