Cisco AAA/Identity/Nac :: ACS 5.x / How To Backup Configuration

Mar 10, 2013

Cisco ACS 5.x appliance?How to back up Config?What is best way, via TFTP? COPY Startup-config tftp:?COPY Running-config tftp:?I currently use Solarwinds CatTolls to back my Cisco Switches, can I use this for Cisco ACS also?

View 3 Replies


ADVERTISEMENT

Cisco AAA/Identity/Nac :: Backup Configuration On ACS 5.2?

Jun 8, 2012

How to backup the configuration on cisco acs 5.2 and how to restore it , if some thing wrong happened

View 7 Replies View Related

Cisco :: Backup Configuration On LMS 4.2

Nov 21, 2012

1)how can i backup the configuration on cisco lms 4.2 and to re-imported later when i re-install the lms 4.2
  
2)how can i change the admin password on cisco lms 4.2

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Fail To Backup ACS 5.1?

Nov 27, 2011

I tried to backup ACS 5.1 but i found error messages as below
 
acs backup25Nov11 repository 25Nov11Repository
% Repository not found
% Error: Invalid repository name 25Nov11Respository

Please use a configured repository.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.1 Possible To Do Backup Via GUI Or Done By CLI Access

May 19, 2013

we have ACS 4.1 appliance and will do upgrade to 4.2. We need backup user database and system settings.via Gui I am not sure what all we backed up - dmp file seems to be only encrypted user databse but it can be crypted back up file.
 
How is possible do complete backup of current machine (user database and system config)? Is it possible via Gui or has to be done CLI access?After upgrade will be on machine previous config and database or or will be appliance completelly re-imaged?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Backup Restore?

Oct 20, 2011

I've been setting up building and testing our new ACS 5.x boxes and I've been running into a spot of bother with the backup restore feature. This most likely due to my unfamiliarity with the tool.

As part of my testing for Backup/Restore, I first backup the data using the Removal and backup  tool in Secure ACS View (found under data management. I then confirm that the new FULL backup has been populated my test repository and is available in the restore feature. (also under Data Management) My next step is to create a few test Network Device Groups, Identity groups, and users  Then I go back to the restore feature select the Back up file I just created, I also check the box Skip View Database backup before Restore and hit the restore button.
 
The box goes through the expected steps including a reload. When it comes back up I would expect the test users, groups etc I created after the last backup to be gone as they did not exist at that time. Although I find the opposite is true. Any settings I made after the last backup are still present. I do not have incremental backups enabled.
  
I essentially want to test a backup of the database of users and groups/rules etc make changes and then restore that database to the previous backed up configuration.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: How To Install ACS 5.X Backup

Sep 4, 2011

I have ACS 5.2 in standalone mode in operation and need not incorporating a second server for high availability ACS, the new ACS is a version 5.1
 
What should I do first, upgrade the ACS version 5.2 and created the high availability or high availability and get up after the upgrade?

View 2 Replies View Related

AAA/Identity/Nac :: ACS 4.2 Backup Through Console / CLI

Jun 6, 2012

Due to some wrong access policy applied in the administration control settings. GUI access is not functioning. So we need to take a backup thru CLI mode using FTP server. I have tried using the backup command in the console & taken the backup using the following steps. But the backup file is less than 1kb. I need the exact Db backup to be taken.
 
Step 1 Log in to the ACS SE. For more information, see Logging In to the Solution Engine from a Serial Console.Step 2 At the system prompt, enter backup and press Enter.Tip You can enter the following parameters after the command or in response to subsequent prompts: [server] [username] [filepath]Step 3 At the Enter FTP Server Hostname or IP Address: prompt, enter the FTP server IP address or hostname, and press Enter.Step 4 At the Enter FTP Server Directory: prompt, enter the FTP server directory pathname, and press Enter.Step 5 At the Enter FTP Server Username: prompt, enter the FTP server username and. press Enter.Step 6 At the Enter FTP Server Password: prompt, enter the FTP server password and, press Enter.Step 7 At the File: prompt, enter the name that you want to give the backup file, and press Enter.Step 8 At the Encrypt Backup file? <Y or N>: prompt, enter Y to encrypt the backup file or N not to encrypt it, and press Enter.Caution This procedure interrupts the use of the ACS SE for AAA services.Step 9 If you entered Y to encrypt the backup file, at the Encryption Password: prompt, enter a password and then press Enter.Result: The console displays:Backing up now . . .

All running services will be stopped and restarted automatically.Are you sure you want to proceed? <Y or N>Step 10 To proceed, enter Y and press Enter.

View 5 Replies View Related

Cisco :: LMS 4.2 Backup Configuration Of Devices

Nov 29, 2012

How to backup the configuration of Cisco devices managed by LMS 4.2 and store it in Folder , than restore it once it need it

View 10 Replies View Related

Cisco AAA/Identity/Nac :: Unable To Make Backup In ACS 5.1

Jan 28, 2012

When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:

FullBackupOnDemand-Job     Incremental Backup Utility     System     Wed Jul 13 16:50:23 EEST 2011     Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error     Failed,I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.

I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without success.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ASA4.2 - ACS Backup On Map Drive

Feb 8, 2012

I have ACS 4.2 on vmware machine, everything is working fine. Automatically backup is already set on local machine, but the thing is, i want to configure automatically backup on my file server (ex. \1.1.1.1acsbackup). Even though i have defined the acsbackup folder through map drive but no success. when i define the above string in the backup location directory, it shows an error (no directory exists). How do i configure file server or map drives on acs & save daily backup on fileserver

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Default Backup Password?

Aug 15, 2012

When doing a backup on any of the ACS 5.x appliances by default the backup is encrypted with PGP. What password is used for that? Is it configurable?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: SFTP Backup Does Not Work For ACS 5.3

Feb 21, 2012

We have ACS 5.3, and trying to set up sftp backup on freesshd server. SSH connection works, but ACS cannot copy backup file to sftp server, we get following errors:
 
Acs.MGMT.ACSVIEW Backup failed: CARS_XM_SSH_CONNECT : -306 : SSH connect error
 
FTP backup works fine.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.x - Unable To Backup By SFTP

Apr 5, 2011

I am not able to backup ACS 5.x server by means of SFTP protocol. We use ACS 5-2-0-26-2. My configuration of repository is:
 
repository SFTP
url sftp://x.x.x.x/home/user
user user password hash 455ad
 
command 'backup acs01 repository SFTP' does not work and I receive the following error message on ACS server:
 
%SSH connect error
 
On my sftp server I can find the following error messages:
 
Apr  6 06:57:46 CR01 sshd[8561]: Accepted password for user from 10.20.86.72 port 47924 ssh2Apr  6 06:57:46 CR01 sshd[8563]: Received disconnect from 10.20.86.72: 11: disconnected by user

How to successfully performed backup by means of SFTP protocol? Do I need any other configuration settings except repository? Do I need to store my SSHD RSA key to ACS? I am able to copy files using SFTP from other computers, so it seems that SFTP server is set correctly.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: Unable To Make Backup In ACS 5.1

Jul 12, 2011

When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
 
FullBackupOnDemand-Job     Incremental Backup Utility     System     Wed Jul 13 16:50:23 EEST 2011     Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error     Failed
 
I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
 
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without succes.

View 8 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 - Cannot Find Backup File

Jan 20, 2013

I had ACS 5.2 ( Evalution License ) setup installed on VMware with patch 11 when I try to restore earlier backup of ACS gives me  error "Cannot find acsbackup_instance.log in the backup file"

I am using Filezilla FTP sever for backup transfer.

View 5 Replies View Related

Cisco Switching/Routing :: How To Backup The Configuration Of ACS 5.3

Mar 15, 2012

how to backup the configuration of ACS 5.3 then restore it on the secondary ACS 5.3 Appliance in order to save time without configure the 2nd Appliance?

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Backup ISP Configuration

Jun 13, 2011

I'm having problems configuring an asa 8.2(1) with a backup isp.  I followed the asdm instructions in this document: [URL]
 
I have my backup interface configured as DHCP and the static routes set. Pinging the gateway and other external IP address from the backup interfaces works normally. I have also tried configuring the backup interface as a static address but got the same results.
 
When removing the primary wan link, all traffic stops. When I ping a external DNS, I get these errors in the log: portmap translation creation failed for udp src inside: 192.168.13.23 dst backup:208.67.222.222_type 8, code0)
 
I though this type of error is related to a NAT problem, not sure where to look though.

View 4 Replies View Related

Cisco Wireless :: Backup Configuration On WAP 5508?

Feb 5, 2013

how to backup a Cisco Wireless Access Point Controller 5508.

View 2 Replies View Related

Cisco :: Backup Of Configuration From Nexus Switches 5K And 7K

Dec 4, 2012

I'm busy on configuring the backup of the configuration from Nexus switches 5K and 7K.I have installed COPSSH on my windows server and try to confiugre the sftp credentials. [code] I have tested from the CLI from the switch and i have the issue but if i use the default vrf 'default' it works fine.How can i change the command sent by DCNM to the Nexus in order to specify vrf default and not vrf management ?

View 1 Replies View Related

Cisco :: LMS 4.0.1 - Device Configuration Auto Backup

Mar 6, 2012

Is it possible to create a job what automatically export the devices configs that are in the folder CSCOpxfiles medemushadow? It would be wonderdul if CW could export the .cfg files into a .rar and send in email or something like this.

View 1 Replies View Related

Cisco :: 5508 - NCS Configuration Backup And Restore Of WLC

Jan 10, 2012

I recently tested the process for a customer of defaulting a Cisco WLC to factory configuration and then restoring the configuration from Cisco NCS.  It was not seamless to say the least and I wonder if I have just gone about it the wrong way. 
 
Have have set the NCS platform to configuration sync with the 5508 controllers at 04:00 every day and prior to the controller defaulting I ensured that NCS also reported that the config was in sync. I have also set NCS to complete a tftp backup of the controller every night 23:00 - interestingly though I have no idea where this is stored on the NCS platform ( a VM appliance ) or what it's file name is.
 
Anyway my experiences where as follows:-
1.  defaulted WLC and via serial CLI ended up at the configuration wizard.
2.  Set the correct LAG, management IP, host name that NCS knew this controller by.
3.  To test things just created a dummy WLAN ( SSID ) as I assumed this would be overwritten ( big mistake ! ). 
 
At this point I connected the controller to the network and tried to restore the configuration from the config sync version.

First problem - you have to remember to set up the SNMP community string you were using as it is needed by the configuration sync process.  After adding this to the controller I could push the configuration to the controller.

Second problem - failed to add the first WLAN from the backup as I have added the temporary dummy W LAN via the wizard and NCS reported a conflict.  So had to delete WLAN ID 1 from the WLC GUI directly and then the config push no longer reported this error.

Third problem - for some reason did not add the TACACS server details - reported the error that it could not added them.  I manually added these via a template via NCS and all was well. 

Fourth problem - all but the first WLAN was in the disabled state - had to re-enable all of the WLANs. 

Fifth problem - any default items I had disabled or removed have not been saved - therefore I have removed the public and private SNMP communities - but these were still on the WLC after the restore.  I have disabled unused ports not in the LAG as they show an error in NCS - these where not disabled after the restore.
 
So all in all not a very satisfactory restore process from NCS to an defaulted WLC ( meant to simulate to the customer what would be needed if they had to replace a controller due to hardware failure ).

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3.0.40 On-demand Full Backup Failed

Dec 27, 2012

I have ACS 5.3.0.40 Primary Secondary Authenticators , of which the Scheduled backup has stopped.When checked the : Monitoring Configuration > System Operations > Data Management > Removal and Backup > Incremental Backup , it had changed to OFF mode. without any reason.Later i did the acs stop/start  "view-jobmanager" and  initiated the On-demand Full Backup , but no luck, same error reported this time too.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 - Delete Local Backup Files?

Apr 10, 2013

I'm doing a basic setup of ACS 5.3. For now, I'm configuring backup to a local repository
 
!
repository Backup
url disk:/Backup
!
 
How can I automatically delete old files? I need to keep only the last seven files.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: 2901 - 802.1x Backup Solution For Local AAA?

Feb 26, 2013

So I've decided to utilize 802.1x on a switch module on a 2901, reasons being for mobility for a laptop and network security.
 
However, the 802.1x authentication occurs over the VPN Tunnel (over the Internet).  What our concern is, what happens if the Internet or Tunnel goes down?  I know that 802.1x does not authenticate against the IOS local DB, so what would be another option in case this scenario happened?
 
There will only be one device authenticating (maybe 2) and they are 2 HP Windows 7 laptops.

View 4 Replies View Related

Cisco :: User Privilege Level For Configuration Backup With PI 1.2

Feb 15, 2013

We have more than 50 devices handling by PI 1.2 (testing) I like to know how to do configuration archiving with user who doesn't have write privilege.
  
I tried like this.
  
username john privilege 6 password cisco privilege exec level 6 show running-config
  
(result) show run --> blank
 
  I tried this user with one of switch in PI 1.2. It did not do configuration backup
 
username inout password inout username inout privilege 15 autocommand show running-config
  
(result) once logged in, it automatically showed running-config. However when I tried with PI 1.2 with this user (inout). I couldn't do configuration back.
 
reference [URL]
  
create certain user with read-only privilege while PI 1.2 is able to do configuration archiving ?

View 0 Replies View Related

Cisco VPN :: ASA 5505 Backup Configuration To TFTP Server?

Oct 4, 2011

Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.

View 1 Replies View Related

Cisco :: LMS 4.2.1 - Backup Configuration Of WS-C4503-E Version Cat4500e

Oct 11, 2012

I have a Cisco LMS 4.2.1 on a Windows 2008 Server R2 platform and I would like to backup the configuration of my WS-C4503-E version cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1I create the job in Configuration > Configuration Archive > Synchronization and after the execution of the job, I check th status in Admin > Job > Browser: I don't know why the archive doesn't exist. It's a newly install.

View 2 Replies View Related

Cisco Application :: ACE-20 Module - Automated Backup Of Configuration

Feb 4, 2010

I am currently stuck to setup an automated configuration backup for ACE Blades. I found a script to backup the ACE from the Cisco ANM box but unfortunately I am not very familiar with Linux. (script) in place, to "pull" the ACE config from a Microsoft system ?
 
System State:
ACE IOS A2.(1).5

View 2 Replies View Related

Cisco Switching/Routing :: 2960G Don't Have A Backup To Configuration In PC

Dec 30, 2011

I have 2960G that in rommon status.I need that the switch work in 0x2102 (regular mode).I don't have a backup to configutratuio in my PC.I do wr before the switch go to rommon (startup config).What to do in order to the switch will be in 0x2102 (regular mode) with the same configuration( before the switch go to rommon)?

View 1 Replies View Related

Cisco :: 2504 WLC To Trigger Configuration Backup When It Is Saved

Apr 17, 2013

I can't seem to find and answer to this, but is it possible on a 2504 WLC to trigger a configuration backup when the configuration is saved like on Cisco routers and switches?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - Backup ISP Link Configuration?

Jan 28, 2013

I'm working on setting up a backup link for our ASA 5505 and I've followed these directions:  [URL]
 
The backup ISP gives us a dynamic address, however, when I enable the backup ISP's interface on the ASA, my vpn tunnels drop. As soon as I disable the backup interface, the tunnels come back up. I'm attempting to configure this across one of these tunnels, so obviously this is an issue, as is the fact that other people need the tunnels as well. I'm not sure what I did to make this happen, but I've been over the config many times and can't see anything different from the instructions in the link above.
 
I thought it might be trying to route traffic across the backup interface, but my primary interface is tracked and has SLA running on it, so I would assume it wouldn't roll over onto the backup interface.

View 1 Replies View Related

Cisco Firewall :: ASA 5520 Configuration Backup With Archive?

Nov 15, 2011

On our cisco 3750 switches we can take config backups with the archive command. After every "write mem" it rights the config to our backup server. We would like to do this also for our asa 5520 with version 8.2(2). I also searched in the command reference guide, but I can't seem to find the proper command to do it.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved