Cisco :: 2960 / LMS 3.2 Devices Showing Not Managed By Campus Manager
Sep 28, 2011
We are using Campus Manager 5.2 with LMS 3.2. We have 100 devices and all 100 devices has been successfully discovered in Common services in all 100 devices are showing in DCR.When we check in RME we have found all 100 devices over there.
But, in Campus Manager we got only 95 devices. out of 88 WS-C2960G-24TC-L 5 switches are not showing in Campus manager. we have added the same manully ( manually included & Ecluded all 5 devices in Campus manager) and start the data collection, but no result.
After data collection it is showing not managed by Campus Manager when we check ( Show all Included devices option).
View 5 Replies
ADVERTISEMENT
Dec 29, 2010
I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 19 devices in Not Managed state.
View 5 Replies
View Related
Jan 1, 2013
I am having Cisco LMS 3.2.I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager. Is there any way so that I can restric users to campus manager only?
View 9 Replies
View Related
Dec 12, 2011
UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
View 1 Replies
View Related
Feb 19, 2012
I have the following drawback was held on autodicovery on a CiscoWorks LMS 4.0 which captured all the IP's of the devices on the network between these found a LAN segment that connects to all devices, when creating this view for the Campus Manager appears a LAN segment and We don´t want to appear there on the views, can you edit the view and delete this segment of the map. or if it is necessary to rediscover again.
View 2 Replies
View Related
Nov 16, 2011
this is a device discovery issue with LMS 3.2. The devices added up in Common Services are not getting reflected under Campus Manager and Device Fault Manager. The devices are manually added and are stack switches (2960S-24TS-L).
View 1 Replies
View Related
Sep 29, 2011
When will Campus Manager support the 2960S switch series?
View 2 Replies
View Related
Feb 14, 2012
I have a strange problem with one switch in my LMS 3.2.1 installation.It is a WS-C3560-48TS with IOS 12.2(50)SE3 running. I have nine switches with the same type and IOS running without problems.
I notice the problem because there were no UT data for that switch. In RME and CS it was managed.Checking SNMP and config of the switch, but can't find any issues.Because at this time LMS ran in version 3.2 I installed at first CM 5.2.1 and after that the patches for CSCtd49439 and CSCtg20882.Next step was RME 4.3.1 with a lot of patches for different issues. Then I installed the patch for the internal error of CS (CSCtd07131).And finally I installed LMS 3.2.1 and patch for CSCto46927.Last step was installing the latest device packages. I did this directly from the application because it is much better handling than do a manual download. No the system seems to be fully updated.
I had the hope that CM will now find and manage this one switch. But it is still not available.I can't find the device in the data collection. But I can find it in the "Include Devices From DCR", although I configured to fetch all devices from DCR automatically to CM. To manually include the device is not working, too.
P.S. I used that step-by-step update path because it worked on two other servers very well for me.
View 1 Replies
View Related
May 2, 2012
Because of licensing we want to keep some particular devices unmanaged via Inventory => Manage/Unmanage devices.But after some minutes all unmanaged set devices get back to managed. Its reproduceable many times.
View 3 Replies
View Related
Mar 5, 2012
No network adapter showing in device manager
View 2 Replies
View Related
Apr 27, 2011
i've just upgraded my graphic card and now i don't have any network adapters listed in the device manager (only firewire under +IEEE 1394 and all the other devices) I've already reinstalled Windows 7 (64 Bit) and tried installing another LAN card (10/100) - that wasn't recognized.
Within the BIOS (award- Motherboard- GA-P35-DS4 ) i couldn't find anything related that should be turned off/on? [URL]
Could it be broken if it is not appearing there? If yes- why isn't the motherboard recognizing my other LAN Adapter that i've installed on the bottom slot
Should i reset the Bios by pulling the battery/using the cmos jumper?
View 4 Replies
View Related
Sep 13, 2012
after installing xp my wireless card doesnt show in device manager
View 8 Replies
View Related
Feb 4, 2011
My Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"
View 1 Replies
View Related
Sep 13, 2012
I'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.
I have tried unplugging and replugging, and also scanning for hardware changes in device manager.
View 1 Replies
View Related
Mar 13, 2013
I am having vastro 460 with intel i3 and window 7 32 bit . try to install driver for network card but not working. ping is working but not showing it in device manger.
View 5 Replies
View Related
Feb 22, 2013
I recently formated my dell xps l502 system and installed with windows 7 Os.after that my Lan and Wifi are not working.when i did the ip config /all.it is showing only the following options.
-HPrimary DNS suffix :
-NodeTYpe: Hybrid
-IP Routing enabled :no
-WInsx Proxy Enabled : no
View 5 Replies
View Related
Jan 5, 2013
I have an acer M5641 desktop and i do not have a network adapter , i reinatall windows 7 basic premium and no success
View 1 Replies
View Related
Oct 29, 2012
I am using Dell Inspiron N4010 for more than a year now. It was running good. At office i am using wi -fi and at home i was using through cable connection. Fer last few days my wired connection was not working and i got all cable checked and replaced, but could not solve the problem. Then i found that in device manager, network adapters, its not showing and wired adapter. Only wi-fi and blue tooth adapters are there. I can still connect to internet at office via wi fi but its not working at home now with wired connection.I am not able to understand how it stops working and why its not showing in device manage (Network adapters).Yes one more thing i want to disclose is that earlier i have only one drive i.e. c drive wich few days back i compressed and created another drive.
View 4 Replies
View Related
Jul 3, 2012
I am working with LMS 4.1 and FDM 4.1.0.
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported. CDP is enable in each one of these devices.
View 3 Replies
View Related
Oct 17, 2011
is it possible to cascade a managed cisco switch with an unmanaged switch via SFP LC Modules?
View 1 Replies
View Related
Aug 20, 2011
I any running Cisco Works LMS 4.0 on Windows 2008 Enterperise Edition with SP2.I am facing 2 issue which are below:
1. Get message "You are using unsupported Version". As per Cisco document Windows 2008 Ent edition is support by LMS 4.0
2. All of my devices are showing unreachable. I already double check the Devices Credential include SNMP (Read and Write community) and Username and passwords.I can accessble all devices via telnet from the same Cisco Works Machine.
View 1 Replies
View Related
Jan 31, 2013
I have discovered my switches in LMS but it is showing unreachable what can be the reason ?
View 5 Replies
View Related
Oct 10, 2011
My DFM is showing 40 devices in the "Questioned" State. Lots of them are 3750 switches and 2801 routers. It has "Known" a few of the 3750s and 2800s, but most of them are Questioned. How do I go about troubleshooting this? It's
DFM 3.2.0, part of LMS 3.2;
I tried to reinitalize the DFM database, but that caused all sorts of other issues like my ANIServer not running anymore etc. I have a ticket open with TAC for that issue though.
View 3 Replies
View Related
Jun 9, 2013
We had an existing installation of LMS 4.1 which seemed to have worked fine with the exception that it was giving problems with logging Syslog events. We tried everything to resolve it and then we found a link on this very site that explained that there was a bug in displaying Syslog events on LMS 4.1. It is important to state that we would get a few Syslog events but the rest were either filtered or discarded.As per the bug toolkit, we realized that we had to upgrade to LMS 4.2 to have the bug resolved. This was not a problem and we installed LMS 4.2 as a direct upgrade to LMS 4.1. We backed up our existing data and the installation process migrated everythin automatically.Now, LMS 4.2 is installed and our objective of having Syslog messages are being received regularly as we wanted.unfortunately, when we try to generate a report such as "Detailed Device" report and try to select All Devices from the Device Selector menu, we do not see any of our devices. However, we do find our devices listed under User-Defined Groups -> (Our DCR). Based on this, we can generate reports and everything is fine.Yet, we are doing this for a client of ours and they expect to see these devices listed in the "All Devices" section of the device selector. Apart from that, everything seems to be working fine.
View 2 Replies
View Related
Sep 29, 2011
I have added all of the devices to DCR and they show up with their hostname value in all of the device trees except for the fault manager views. In all of the fault manager views the hostname is not being used for the Devie Name field, rather the IP address is being used.
View 6 Replies
View Related
Feb 17, 2013
A particular & ungreatful person abused my laptop to the point where I had to install a password. I had to perform all kinda of removal actions but I just noticed in my network domain that his name followed by "PC" & under "media devices" & "network infrastructure" contains his name again w/ PC & devices called [TV]UNE40ES6100.I am using the program's wireless service which I am allowed-to. I just want to remove this person from my laptop. It won't delete when r. clicking. I have win 7 and use this laptop mainly for my online school & email.
View 9 Replies
View Related
Mar 6, 2012
We have supplied Cisco Swtch 2960 with gig SFP modules. It is working fine. However, when I do a show inventory it show proper part no. for the switch chassis but for the GLC T module it shows as unspecified in the PID column.
View 1 Replies
View Related
Apr 20, 2011
I noticed a TON of random devices showing up in my Network within Windows 7. When I say a ton, I mean 739! I am not computer illiterate, but definitely not a pro. My router is WEP password protected, so I'm not sure on earth is going on here. I thought maybe I had a torrent program open that could be affecting this somehow, but I don't..
View 6 Replies
View Related
Sep 3, 2012
I'm using the EA4500 router with Cisco Cloud Connect. I've noticed under Devices I'll see devices named "Network Device". They have a generic MAC address with something like "00:00:00:00:2F". They will have an IP that's already assigned to another device.
View 9 Replies
View Related
Aug 6, 2012
my intel inspiron N5010 not showing any wireless devices.
gave a link to download the whole driver pack.
View 1 Replies
View Related
Apr 26, 2011
I just got a DIR-655 and set it all up pretty easily. I have 6 wired and 3 wireless. All work fine and all are set to use DHCP. But if I go (in the router) to the Lan Computers list under Device Info, three devices (2 wired, 1 wireless) do not appear. I do have a switch added to the system, but of the three devices connected to it, 1 shows in th Lan Computers list and the other 2 do not.Since everything works, I'm mostly just curious why this is. Every previous router I've had showed everything correctly.
View 3 Replies
View Related
Sep 27, 2012
I have 4 x 2960 switches in a remote site. These are managed by an NMS in our DC, the NMS IP ends in 35.100 with a /23 mask.
When they are first booted, the switches are visable to the NMS, but after a week or 2, 3 of them drop connection to it. If you reboot them again they are fine. You are able to log onto them form thier local router and use a Radius server which is in the same subnet as the NMS.
The odd thing is, whilst they can not ping the NMS, they are able to ping any other addresses in the 34.0/23 range.
The config on the one that does not lose connection is the same as the other 3 and I have also rebooted the NMS.
View 3 Replies
View Related
Apr 9, 2013
I just got PI1.3, I'm new with it, and I don't know how to add devices. I have an 4500-X, an 3850 and 12 pcs. 2960S.
I see that are some out-of-the-box templates, but when i try to deploy, for example "medianet perfom" in Devices box I got "no data available"
What I have to configure on switches?
View 2 Replies
View Related
