Cisco VPN :: Migration From ASA 5505 To 5510
Jun 27, 2012
my company has the asa 5505 working as the remote access vpn server. my company needs more licenses for vpn than the asa 5505 give it. because of my company purchased the asa 5510. i must migrate configuration from the asa 5505 to the asa 5510. i exported configuration file from asa 5505. i made the changes on them and imported them in the asa 5510. my asa5510 doesn't work. i putted configuration files from asa 5505 and 5510.
View 10 Replies
ADVERTISEMENT
Nov 26, 2012
My company (in Healthcare) is going to be changing ISPs for our internet connectivity, and with this change comes a new external IP block. So I need a scheme to migrate over all of my existing VPN tunnels and other items over to new IP addresses. We do have an external router which I plan on doing a route-map to handle which traffic the ISP should go to based on IP. My big concern is for the ASA 5510. Can I setup a second outside interface on the new IP range? Then migrate my VPN tunnels over one-by-one? A drop-dead cutover date is just not possible with all of the external companies that I have to contact to get VPN tunnels updated with. If it's not possible, we have in our budget to get another 5510 next year as a redundant unit. I may be able to get that early and just migrate from one firewall to another.
View 3 Replies
View Related
Apr 24, 2011
I have just upgraded a ASA5510 from 8.2 to 8.3 using migration tool.All seemed to go well, still double checking the config as this is a bench test of upgrade prior to filed upgrades.
Anyway one thing that is slightly frustrating is that the migration has expanded all of my access-lists, so we maybe had 10 lines of config relating to access-lists based on access-groups, now we have hundreds of lines.On ASDM this is bad enough but on CLI with show run its a bit of a bind.
Is there any way to un-expand the access list or do I simply delete and start again using my access groups.
View 2 Replies
View Related
Apr 4, 2012
I'm trying to get a tunnel to come up between a 5510 and a 5505. I currently have a vpn tunnel up and running from the 5510 to another remote site. [code]
View 2 Replies
View Related
Aug 14, 2011
Attached is a diagram of my network. My company has leased some office space to an outside company that handed me a 5505 and said "We want to VPN to our HQ through your Internet". I have two issues: I need this to work and I need to be able to access the 5505 from the management network. I don't care about the VPN aspect as much as making sure that I have basic communication down. I have everything configured per the diagram, but I can't ping the 5505 outside (Vlan 2) interface. I want to be able to configure and test the VPN setup on the 5505 from Putty on my PC.
The default route on the 5520 sends traffic to 10.10.1.1 and the default route on the 5510 sends traffic to the WAN interface. I added this route on the 5510:
outside 10.94.4.0 255.255.255.0 10.10.8.1
I still can't ping the default gateway on the 5505. There is a switch between my PC and the 5520 but the default route passes the traffic to the 5520. However on my tracert I don't even get to the 5520. Do I have to add a route to the switch just to manage the ASA 5505?
View 1 Replies
View Related
Dec 10, 2011
i want to connect to asa 5505 (office 1) using vpn from ASA 5510(office 2)...The network guy in office 1 has asked me to setup ASA 5510 has hardware client mode.
i have the following details from office 1
host peer address of office 1 : A.B.C.D,
phase 1 encryption : DES
phase 1 Authen : SHA
Diffie helman : group 2
Groupname : MNC
IP Schema remote site network : 170.31.0.0 255.255.0.0
password : Cisco$123
In asa 5510 ,
ASA Version 8.2(5)!hostname CISCOASAenable password 5EpARJwwtf4VFC9S encryptedpasswd 5EpARJwwtf4VFC9S encryptednames!interface Ethernet0/0nameif outsidesecurity-level 0pppoe client vpdn group DADAip address pppoe setroute!interface Ethernet0/1nameif insidesecurity-level 100ip address 192.168.10.1 255.255.255.0!interface Ethernet0/2shutdownno nameifno security-levelno ip address!interface Ethernet0/3shutdownno nameifno security-levelno ip address!interface Management0/0nameif managementsecurity-level 100ip address 192.168.1.1 255.255.255.0management-only!ftp mode passiveaccess-list 124 extended permit esp any anypager lines 24logging asdm informationalmtu outside 1500mtu inside 1500mtu management 1500icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp
[code]......
What more i need to add to get the vpn connected with ASA 5510?
View 1 Replies
View Related
May 7, 2013
for testing purposues i wanted to exchange a running ASA 5510 with a ASA 5505. I included the running configs from both the ASA 5510 and the new configured ASA 5505.
On the running ASA 5510 there is:
one interface for WEB
static IP xx.xxx.xxx.178
route 0.0.0.0 xx.xxx.xxx.177
[Code].....
View 1 Replies
View Related
Jun 29, 2011
i have a small asa 5505 trying to connect to a asa 5510
cisco-26834# sh crypto isakmp sa
Active SA: 1 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 1
1 IKE Peer: 216.**.**.146 Type : user Role : initiator Rekey : no State : AM_CTCP_WAIT_REPLY
here's the full debug for the 5505 :
cisco-26834# Jun 30 03:35:26 [IKEv1 DEBUG]: IP = 216.**.**.146, IKE AM Initiator FSM error history (struct &0xc66a55b8) <state>, <event>: AM_DONE, EV_ERROR-->AM_CTCP_WAIT_REPLY, EV_CTCP_LINK_FAIL-->AM_CTCP_WAIT_REPLY, NullEvent-->AM_CTCP_INIT, EV_REQ_CTCP_LINK-->AM_START, EV_START_AM-->AM_START, EV_START_AM-->AM_START, EV_START_AM-->AM_START, EV_START_AM
Jun 30 03:35:26 [IKEv1 DEBUG]: IP = 216.**.**.146, IKE SA AM:c045cc52 terminating: flags 0x01000021, refcnt 0, tuncnt 0
Jun 30 03:35:26 [IKEv1 DEBUG]: IP = 216.**.**.146, sending delete/delete with reason message
Jun 30 03:35:26 [IKEv1]: IP = 216.**.**.146, Error: Unable to remove IPSec/TCP entry
[code].....
what should i check on my 5510 ?
View 1 Replies
View Related
Aug 14, 2011
My company has leased some office space to an outside company that handed me a 5505 and said "We want to VPN to our HQ through your Internet". I have two issues: I need this to work and I need to be able to access the 5505 from the management network. I don't care about the VPN aspect as much as making sure that I have basic communication down. I have everything configured per the diagram, but I can't ping the 5505 outside (Vlan 2) interface. I want to be able to configure and test the VPN setup on the 5505 from Putty on my PC.
The default route on the 5520 sends traffic to 10.10.1.1 and the default route on the 5510 sends traffic to the WAN interface. I added this route on the 5510:
outside 10.94.4.0 255.255.255.0 10.10.8.1
I still can't ping the default gateway on the 5505. There is a switch between my PC and the 5520 but the default route passes the traffic to the 5520. However on my tracert I don't even get to the 5520. What's going on here? Do I have to add a route to the switch just to manage the ASA 5505?
View 30 Replies
View Related
May 22, 2011
I´m looking for a firewall for my company and am reading about both Cisco ASA 5505 with Security Plus bundle and Cisco ASA 5510 with Security Plus bundle and I have a few questions.This is the document i´m getting my information from.URL,It states the following:Cisco ASA 5505 Security Plus bundle,Includes Cisco ASA 5505, unlimited users, 8-port Fast Ethernet switch, stateful firewall, 25 IPsec VPN peers, 2 SSL VPN peers, stateless Active/Standby high availability, dual ISP support, DMZ support, 3DES/AES license, and 1 expansion slot.
View 5 Replies
View Related
Jan 24, 2013
I am trying to find out the best path to upgrade to two ASA 5510 running 9.0 (1). I know there are changes in the new version. Let me know what information you need and i will post.
View 2 Replies
View Related
Dec 5, 2010
I've a asa 5510 on the main site and different ASA 5505 on secundary sites for VPN tunneling between the sites. The problem is that the tunnels are acomplished but no traffic is going over them. What am i doing wrong? For the moment there is a ASA 5505 on the main site managing the tunnels but I want the 5510 to take over the job.
View 5 Replies
View Related
Oct 15, 2012
We have a ASA 5505 and a 5510, that we are using site to site..I need to traceroute from the 5505-5510.. From the outside interfaces.. Don't want to do this through the site-to-site.I have temporarily added a few acl on the outside interfaces..
-access-list outside_in extended permit icmp any any unreachable
-access-list outside_in extended permit icmp any any time-exceeded
-access-list outside_in extended permit icmp any any echo-reply
when i traceroute it only goes one hop.. Maybe thats the way it suppose to be? I need to know all the hops between the outside interfaces on the 5505 to the outside interface on the 5510.
View 1 Replies
View Related
Mar 18, 2012
I am absolutely new in the enterprise firewall world but I would like to start learning how to configure ASA 5505 and 5510. I did some research myself and I found that the material or the topic itself is a huge adventure (lots to read and understand). My company uses IOS versions until 8.2 due to the differences in the NAT-ting rules with 8.3 and 8.4.
View 1 Replies
View Related
Mar 1, 2012
I have not really set up ASAs nor VPNs on Cisco devices before. I'm currently attempting to configure a remote access VPN between ASA devices, a 5505 and a 5510. The 5510 is meant to be the server and the 5505 is meant to be the easyvpn client. The reason I am opting for remote access as opposed to site to site is that I have many 5505s at remote sites that I will need to configure in the future, and they will be moving around a bit (I would prefer not to have to keep up with the site-to-site configs). The 5510 will not be moving. Both ASA devices are able to ping out to 8.8.8.8 as well as ping each other's public facing IP.
Neither ASA can ping the other ASA's private IP (this part makes sense), and I am unable to SSH from a client on the 5510 side to the 5505's internal (192) interface. I have pasted sterilized configs from both ASAs below.
ASA 5510 (Server)
ASA Version 8.0(4)
!
hostname ASA5510
domain-name <domain>
enable password <password> encrypted
passwd <password> encrypted
[code].....
View 3 Replies
View Related
Aug 16, 2010
I currently use MS ISA Server 2006 to protect a windows internal network, where there is also an MS Exchange server. I have acquired a Cisco 5510 to enhance security at main office. Later I will have ASA 5505 for branches, including VPN-ning. to have firewall at main office. I have several public IPs and would like to setup DMZ for Web, Exchange server and FTP. How do I setup interface and sub-interface for the DMZ?Can I continue using ISA Server connecting to Cisco 5510 on the perimeter? If so, How do I set the interfaces (and sub-interfaces) as well as NAT-ting and access configuration between the inside and outside?
View 12 Replies
View Related
Mar 6, 2011
I have a customer moving from a 5505 to a 5510. They are currently running websense express, which monitors and filters traffic based off of a port mirror on the ASA. Can this function still be performed on the ASA5510? If so, I am having trouble figuring out the method.
View 6 Replies
View Related
Feb 17, 2013
I'm looking for automating a couple failover scenarios. Both VPN redundancy and black hole internet traffic redundancy.I currently use the more reliable T1 connection for the VPN connection and the DSL for internet traffic.My current configuration is working but requires a manual update to get the VPN or black hole back up and operational when either link fails.
[code]....
View 7 Replies
View Related
Apr 16, 2011
There are three different sites, two are composed of Multilayer switches cisco 3560 and 3570 as core switches (a 3560 in one site and a 3570 in another site), the last site doesn't have any routers just a 2950 switch. Each site has two asa 5505 as firewalls. Two Internet connexions are connected to every site, one on every firewall. One Internet line is used to connect the different sites together using VPN crypted with IPsec and the other line is just for Internet access. The line that is used to interconnect sites contains voice and data traffic.At the moment all the routes are static routes, the network isn't too big for now and counts not more than 20 subnets.But it is evolving, and I want to use dynamic routing, EIGRP to be more accurate. I've looked into it and I'm not sure how to make it work. The VPNs active on the ASAs don't support dynamic routing, so I thought about GRE tunnels but the ASAs don't seem to allow it either.
View 11 Replies
View Related
Oct 19, 2011
Is there any difference with traffic shaping capability on the 5510 as opposed to the 5505? is there anything the 5510 can do that the 5505 cant? with regards to TShaping?
View 4 Replies
View Related
Nov 17, 2011
Our company is planning to buy one of cisco ASA 55xx series.But there is still one question left about DHCP pool limitations.Here I found some information about licensing for DHCP on ASA 5505: [URL]In other words, we don't have any information about ASA 5510, which contains DCHP pool licensing.
View 9 Replies
View Related
Oct 15, 2012
We have a ASA 5505 and a 5510, that we are using site to site.I need to traceroute from the 5505-5510.. From the outside interfaces.. Don't want to do this through the site-to-site.I have temporarily added a few acl on the outside interfaces.when i traceroute it only goes one hop.. Maybe thats the way it suppose to be? I need to know all the hops between the outside interfaces on the 5505 to the outside interface on the 5510.
View 12 Replies
View Related
Sep 20, 2012
I have a site to site VPN setup between a 5510 and 5505. All traffic is sent ovet the VPN from the remote site to the home office. Everything is working fine but the remote site "www" traffic is not going to the Barracuda. ISP -> CISCO ASA -> Barracuda -> Internal Switch.The Barracuda is setup "inline" with the internal network.
View 7 Replies
View Related
Apr 2, 2012
Trying to figure out how to configure the VPN client side to access a remote LAN.
Lan A - 172.16.17.0 - ASA5505 8.2(3)
Lan B - 200.200.0.0 - ASA5510
Cisco Client - V5
At present there exist a VPN tunnel between LAN A and LAN B. The client has a VPN tunnel to LAN A to run software package X on the LAN A server. The client also needs to run software package Y which needs access to a database on LAN B. The computers on LAN A have no problem using package Y since a VPN tunnel exist between LAN A and LAN B. How can I get the Client to also access LAN B on the same tunnel created when the client connects to LAN A? I can't seem to get packets that are directed to LAN B to cross the Client tunnel to A which would then hopefully move onto the LAN A/ LAN B tunnel.
View 2 Replies
View Related
Jan 30, 2012
We have a new site-to-site configuration comprised of two ASAs (a 5505 at the remote site and a 5510 locally). The site-to-site tunnel is up and appears to be working fine, with the exception of one thing; two identified IP addresses on the remote end cannot seem to communicate across the tunnel.
For example: address 192.168.3.81 is able to see resources at our facility, but 192.168.3.82 (an HP Laser jet P2055dn) cannot. However, 192.168.3.82 is ping able from the inside interface of the remote ASA and doesn't appear to be having any other connectivity issues. Also, the default gateway of this device appears to be set properly. When checking the real-time log viewer, I'm not seeing any error messages, it just appears as if the .82 device is not routing to the remote ASA, but strangely enough the local ASA's logs do seem to show communication with .82. (See the below logs.)
When we attempt to ping the 192.168.3.82 address from a local PC (10.10.10.10) that participates in the VPN tunnel, we see the following:
Local ASA
6|Jan 31 2012|16:03:53|302021|192.168.3.82|0|10.10.10.10|512|Teardown ICMP connection for faddr 192.168.3.82/0 gaddr 10.10.10.10/512 laddr 10.10.10.10/512
[ code]....
Remote ASA
6|Jan 31 2012|16:03:53|302021|10.10.10.10|512|192.168.3.82|0|Tear down ICMP connection for faddr 10.10.10.10/512 gaddr 192.168.3.82/0 laddr 192.168.3.82/0
[ code].....
We can successfully ping 192.168.3.81 from the same local workstation we see the following on the remote ASA :
6|Jan 31 2012|16:03:38|302021|10.10.10.10|512|192.168.3.81|0|Tear down ICMP connection for faddr 10.10.10.10/512 gaddr 192.168.3.81/0 laddr 192.168.3.81/0
[Code]....
We have no IP address overlapping and neither ASA's logs show any errors. Unfortunately, we don't have access to the remote site's router configurations, but we've been assured that the issue is not on their end.
View 3 Replies
View Related
Feb 12, 2013
is it possible to configure a webfiltering on ASA 5505,5510,5520 ? So if its possible can you provide us a configuartion template.
View 3 Replies
View Related
Jun 23, 2011
I have an ASA-5510 in a location that loses connectivity to the wan gateway after anywhere from five to fifteen minutes. At first I thought that the unit might be defective, but I replaced it with an ASA-5505 with similar results. A reload of the ASA-5510 will restore connectivity for the next quarter hour.
Here's the version information on the 5510:
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
Compiled on Tue 05-May-09 22:45 by builders
[Code].....
View 1 Replies
View Related
Mar 23, 2013
A bit of a straight forward question, is it possible to connect a 5505 to a 5510 direct via a crossover or do you need a switch inbetween capable of trunking?
View 1 Replies
View Related
Feb 22, 2011
I use a ASA 5510 and a ASA 5505 and want to connect 2 networks via VPN ASA software version is 8.41. Network 1 has address 192.168.90.0 Network 2 has the address 192.168.5.0 I use site to site VPN wizard on both asa and create the VPN connection. do I need to create acl after that?the PCs on network 1 must have access to a resource in the network 2 how do I create static routing to connect the both Network.
View 1 Replies
View Related
Jun 5, 2012
some recommendations for product selection and overall infrastructure setup for our datacenter: We have an old, legacy setup, and are looking to replace equipment, improve performance, enhance security, and implement hardware redundancy (if cost effective).
1) We now have (2) IP blocks from our provider, and need to support both (because we have mailers on older IPs with a good reputation rating).
2) We have (2) aged Sonicwalls, one for each IP block, each connects to multiple internal subnets (some internal subnets need connectivity to eachother, some don't).
3) We have (mostly) public facing web servers (Linux/Apache), as well as database servers (with no external access).
Questions-
1) Should we implement a Cisco ASA 5520 w/ or w/o SSM modules for the new IP block (for webservers)?
1a) Should we implement a Cisco ASA 5510 or 5505 for the existing IP block (for mailers)?
1b) Or, can we have multiple public IP blocks connected to a single ASA 5520 (or 2 ASA's w/ failover)?
2) Can we connect both firewalls (5520 and 5510/5505) to a single Catalyst 3550 (or similar) using VLANs, and have 6 - 10 VLANs for webserver subnets, with ACLs controlling which subnets/servers can connect to eachother?
2a) Should we implement a second Catalyst 3550 (or similar) for redundancy (webservers have multiple network cards).
3) From our provider, we only have (1) dmark which both IP blocks connect through. Currently we have a switch connected to the dmark in order to 'splice' the connection, and have both existing firewalls connected. Is there a better approach to this?
4) We would like to implement SSL-VPN, and possibly site to site IPSec VPN, but only if there will not be significant performance degredation.
5) Other thoughts/recommendations for new features, enhanced security, or redundancy?
View 1 Replies
View Related
Sep 24, 2011
I am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.
View 1 Replies
View Related
Dec 17, 2012
I am trying to configure access to several remote offices for users who VPN into our main datacenter. The datacenter has a 5520, and the branches are connected through IPSec L2L VPNs. Branches all have 5505 or 5510's. Remote users use IPSec via the Cisco remote Client. Remote access into our data center works, and the L2L VPNs are perfect...just now that i need remote users to access the branches after Remote access VPNing (for support) i cant get that part to work.
View 2 Replies
View Related
Apr 28, 2011
Connection denied due to NAT reverse path failure
View 2 Replies
View Related
