Cisco :: WLC 4400 To 5500 Migration?

May 30, 2012

We have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks.  Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing?  By the time the 5508 arrives I will have a very small window to setup the unit before a new wing goes live.  I need the new unit as we have reached our limit of licensed AP's on the old 4404.  It seems like everyone keeps talking about an easy way but no one says how to do it.
 
I have never setup one of these units before from scratch so I don't know how long it will take.

View 6 Replies


ADVERTISEMENT

Cisco Wireless :: WLC Migration From 4400 To 5500

Jun 1, 2012

i have a existing wireless network setup in my office existing wlc in 4402 and LAPs are 1130 & 1242 all are working fine but we are now planning to use new 5500 series controllers for the same access points,i want to ask that how i can done this job with very minore downtime and users disconnectivity + zero error results??

View 2 Replies View Related

Cisco Wireless :: Migration Of Remote Location APs (4400 To 5500)

Jan 7, 2013

I have a existing wireless setup of 4400 WLC with some  AP's  connected remotely,now i am migrating the whole setup to the new WLC 5500. All the AP has been registered to the new WLC 5500 except the remote location AP's.As there was no option of giving IP address in GUI of the controller in 4400 WLC, i have changed the controller name and restarted the AP, but even though it is going back to the old controller.

View 15 Replies View Related

Cisco :: Migrate WLC 4400 To 5500?

Aug 1, 2011

l need change a wlc 4400 to 5500, but l don´t know what  l need back up, and how can I do to join the H Reap APs in the new 5500 WLC because all H Reap APs that l have, are not in the same city , and I understand if l want join AP in the new WLC l need to connect in the same network segment, is it rigth ?

View 7 Replies View Related

Cisco Firewall :: ASA 1000V And ASA 5500 Migration Between Firewalls

Jul 8, 2012

We currently have redundant FWSM's and are planning a migration to standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and are looking at the Nexus 1000V. I understand the Nexus 1000V and VSG architecture and implementation, and I do understand that the ASA 1000V is designed for cloud environments. But I do have one question about the ASA 1000V.
 
Is it possible for an ASA 5500 series firewall to be replaced by an ASA 1000V? Basically, can an ASA 1000V be a sole firewall solution, or are ASA 5500's still needed? Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?

View 4 Replies View Related

Cisco Wireless :: Roaming Between 4400 And 5500 Controllers

Oct 11, 2012

Actually we have a 4402 controller with 1120 APs both of which are marked as EoL products, we want to jump over the new 2600 APs and 5508 Controller for increase signal coverage but we have the following deals:Last firmware for 4402 controller is 7.0.Firmware needed for 5508 to support 2600 APs is 7.3.Is it possible to configure mobility between 4402 and 5508 even with different firmware branch?

View 3 Replies View Related

Cisco Wireless :: 4400 - 5500 - Bridge With More Than 100Mbps

Aug 12, 2012

We are using Cisco Wireless solution in our network. Using 4400/5500 WLCs and 3500/1130 series APs.
 
A new requirement has come up and we need to provide connectivity between two buildings (which are within 1 km)  using wireless. This link should be able to give >=100Mbps.
 
As we already have 3500/1130 APs, can a wireless bridge be established using them which can also give >=100Mbps? Can this be done using a WLC based solution? What I mean is: Do I need to have a standalone AP solution or can it be done while both the APs register to WLC? What are the AP models/antennas that can meet my requirement?

View 6 Replies View Related

Cisco :: Deploying 4400 Controller As An Anchor For 5500 Controllers?

Jun 7, 2011

in one of the sites, the client has an exisiting 4402 controller which he moved to the DMZ in order to set it as an anchor & he purchased two new 5508 controllers to control the corporate APs.  I configured all the parameters needed for the guest anchoring & then I tested the connection but there was an issue. (all the controllers are running the same firmware version)after testing the setup, the guest users could get an IP from the internal DHCP of the anchor controller (in DMZ), but then they cannot reach the internet or anything outside the anchor controller.Cisco confirmed that the 4400 is fully compatible with the 5500 to work in an anchor-foreign secnario as long as they are running the same firmware version. yet, when I temporarily used one of the 5500 controller in the DMZ as an anchor & I applied the exact same configurations on it as the 4400, it worked perfectly without any issues.
 
note:  on the anchor controller (4400), the management & AP-manager interfaces reside on the same subnet & the wireless guest SSID is also mapped to the management interface.  (may be this setup is causing the issue) but on the 5500 it is working just fine?

View 2 Replies View Related

Cisco Wireless :: To Switch Which Of 2 WLAN Controllers 4400 And 5500

Aug 23, 2012

I have 2 WLAN controllers, a 4400 series and 5500 series controller.  The 4400 series has 100 seat limit on it, with 74 Access Points currently connected.  The 5500 series has a 250 max, but we bought it with only 50 licenses, and it is max'd out at 50.The 5500 controller is the controller that has a DNS entry so that the Access Points will know to find that controller as they're being added.  BUT, because we've reached our limit of 50 licenses, I'd like to be able to set the 4400 series controller to be the controller that new Access Points try to connect to.  By going back to the 4400 as the controller that new Access Points connect to buys me time to plan for more licenses on next years budget for the 5500 controller.

View 29 Replies View Related

Cisco :: Migration From WCS (7.0.230..0) To NCS

Aug 15, 2012

I've valid SAU service contract with WCS. Can I migrate from WCS (7.0.230..0) to latest version of NCS by downloading it from software center or I should purchase some SKU for upgrading to NCS?

View 1 Replies View Related

Cisco :: ASA-SM Migration Experience?

May 22, 2012

Is anybody deploying ASA Services Module? I am looking for feedback/gotchas/advice for a migration from an ASA-5550 HA pair.I also received confirmation from Cisco that VPN termination is active in the latest 8.5/8.6 code releases, so hopefully should be able to fully retire my 5550's.

View 4 Replies View Related

Cisco :: 800 / WLSE To WCS Migration?

Jun 20, 2011

what options are available to a customer with 800 APs that is finally migrating to a centralised model and therefore migrating from WLSE to WCS? Assuming that they move to v8 of WCS can they upgrade their WLSE licenses to WCS?

View 1 Replies View Related

Cisco :: Data Migration From LMS 3.2 To 4.1?

Nov 13, 2011

Are there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Best Way To Do Migration

May 19, 2013

I have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
 
1/ Primary Server as Authentication server & log collector

2/ Secondary server as Authentication server.
 
What is the best way to do the migration? Normaly, i can proceed as follows:
 
1/ Deregidter each server from the deployement ==> Make both the servers standaone
2/ Upgrade the Secondary server.
3/ Upgrade the Primary server (without migrate the log server).
4/ Join Servers to the deployement.

View 11 Replies View Related

Cisco AAA/Identity/Nac :: Migration From ACS 4.0 To ACS 5.0?

Mar 22, 2011

what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
 
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS Migration From 4.1.1.23 To 5.2?

Jan 14, 2012

I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need  to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 Migration To 5.3

Jun 11, 2012

If we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?

whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?

View 1 Replies View Related

Cisco :: 7.0.164.3 / Data Migration From WCS To NCS?

Dec 10, 2012

I am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available).  After stopping WCS, I issued the export userdata C:WCS07Migrate.  The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.  

One contains multiple  a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps.  Was there something incorrect in my command?  Can I use still use these files on NCS? Or do I need to redo the export on the WCS?

View 3 Replies View Related

Cisco :: NCM Features Migration To LMS 4.2

Mar 5, 2013

NCM is going away. It is recommend to move to LMS. We already have a LMS deployment. Currently just used for Monitoring/Performance.Trying to figure out how to get the Configuration change piece that we used NCM for into LMS. Not really having any luck.What I am really wanting to do is configuration archive, device config change notices (when a device config changes I can run report to see who and what was changed), and configuration comparisions (between old and new configs)

View 5 Replies View Related

Cisco AAA/Identity/Nac :: ACS Migration From 4.1 To 5.4

Jun 12, 2013

I need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4

View 5 Replies View Related

Cisco Firewall :: PIX To ASA 8.3 Migration?

Mar 8, 2011

As we are all aware that the ASA8.3 has quite some changes interms of configuration method.
 
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.

View 2 Replies View Related

Cisco Wireless :: WCS 7.0 To NCS Migration

Dec 24, 2011

I'm trying to get all the templates and Maps I've created in WCS into our new NCS. The instructions say just run the export.bat file on WCS and then Migrate into NCS. I cannot find any export.bat file on version 7.0.220.0 of WCS. Is it only available in WCS version 7.0.164.3 ro 7.0.172.0? Do I have to use the export.bat file or can I just do a regular backup and restore?

View 7 Replies View Related

Cisco :: LMS 3.0 To Prime 1.1/ LMS 4.2 Migration?

Nov 28, 2012

A customer is asking to upgrade their LMS 3.0 to Prime 1.1.  However, the customer or their previous system's integrator never actually installed LMS 3.0.  The licensing and PAK were never used as well.  My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed?  How would the migration of the current licensing work with the new licensing PAK if that is the case?  Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?

View 2 Replies View Related

Cisco :: Migration From Asa5505 To Asa5510?

Jul 3, 2012

i exported config file from asa5505. i changed this file and i imported in my asa5510. can you tell me that config file allright

View 1 Replies View Related

Cisco :: Migration From Windows LMS 4.0.1 To Appliance 4.1?

Oct 4, 2011

Can't see this in the documentation, as only Solaris to soft appliance is mentioned, so does anyone know if you can migrate data from LMS 4.0.1 on Windows 2008 to the soft appliance on LMS 4.1?

View 1 Replies View Related

Cisco Firewall :: ASA 8.0 Configuration Migration To 8.6

Feb 12, 2013

I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?

View 5 Replies View Related

Cisco :: WCS 7.0 To Prime Infrastructure 1.2 Migration?

Apr 9, 2013

WCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.

View 13 Replies View Related

Cisco Application :: CSS To ACE Migration Tool In A4(2.0)

Sep 28, 2011

I'm currently working on migration from CSS to ACE. The ACE appliance is running A4(2.0) code. And i couldn't find the CSS to ACE conversion tool in the Web gui.

View 2 Replies View Related

Cisco VPN :: Migration From ASA 5505 To 5510

Jun 27, 2012

my company has the asa 5505 working as the remote access vpn server. my company needs more licenses for vpn than the asa 5505 give it. because of my company purchased the asa 5510. i must migrate configuration from the asa 5505 to the asa 5510. i exported configuration file from asa 5505. i made the changes on them and imported them in the asa 5510. my asa5510 doesn't work. i putted configuration files from asa 5505 and 5510.

View 10 Replies View Related

Cisco AAA/Identity/Nac :: Data Migration From ACS 4.2 To 5.2?

Jul 1, 2012

We have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.

View 6 Replies View Related

Cisco :: WCS 7.0 Cannot Edit AP Migration Template

Jun 24, 2010

Have upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
 
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.

View 7 Replies View Related

Cisco Firewall :: Migration PIX 515 8.0(3) To ASA 5525-X

May 28, 2012

I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
 
The question is, what is the better method to migrade the configurations? Manually?

What is the better version for 5525-X? 8.6.1?

View 4 Replies View Related

Cisco :: WCS 7.0.220.0 Database Export For NCS Migration?

Apr 14, 2013

I have done a WCS 7.0.220.0 to NCS migration prior to moving to Prime 1.2.  I followed the instructions to export the WCS database via the export.bat all command and exported the database.  However, when I import this zip fileto NCS there do not seem to be any of the original WCS templates.  All the maps and AP details have migrated but no templates.
 
I have tried the export again and ploughed through the resultant zip file looking for anything that looks like template files but there is nothing immediately apparent that looks like templates.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved