Cisco Firewall :: ASA 1000V And ASA 5500 Migration Between Firewalls
Jul 8, 2012
We currently have redundant FWSM's and are planning a migration to standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and are looking at the Nexus 1000V. I understand the Nexus 1000V and VSG architecture and implementation, and I do understand that the ASA 1000V is designed for cloud environments. But I do have one question about the ASA 1000V.
Is it possible for an ASA 5500 series firewall to be replaced by an ASA 1000V? Basically, can an ASA 1000V be a sole firewall solution, or are ASA 5500's still needed? Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?
View 4 Replies
ADVERTISEMENT
May 30, 2012
We have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks. Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing? By the time the 5508 arrives I will have a very small window to setup the unit before a new wing goes live. I need the new unit as we have reached our limit of licensed AP's on the old 4404. It seems like everyone keeps talking about an easy way but no one says how to do it.
I have never setup one of these units before from scratch so I don't know how long it will take.
View 6 Replies
View Related
Jun 1, 2012
i have a existing wireless network setup in my office existing wlc in 4402 and LAPs are 1130 & 1242 all are working fine but we are now planning to use new 5500 series controllers for the same access points,i want to ask that how i can done this job with very minore downtime and users disconnectivity + zero error results??
View 2 Replies
View Related
Jan 7, 2013
I have a existing wireless setup of 4400 WLC with some AP's connected remotely,now i am migrating the whole setup to the new WLC 5500. All the AP has been registered to the new WLC 5500 except the remote location AP's.As there was no option of giving IP address in GUI of the controller in 4400 WLC, i have changed the controller name and restarted the AP, but even though it is going back to the old controller.
View 15 Replies
View Related
Jan 3, 2012
How many of you use GNS3 for ASA 5500 Firewalls along with ASDM? While I am on the subject of GNS3 I had a questions about the new version and the capture feature. I installed the latest version last night with the new live capture features but it seems to be only one way capture. T Is there a way to fix this?
View 3 Replies
View Related
Mar 3, 2011
I have a customer with active/standby on a pair of 5510's with the CSC modules. They were inquiring about the AIP/ASA, and since this would NOT work in their current setup, would getting a pair of 5510/AIP configured for transparent failover work placed in front fo the existing units? Would I need to have a switch placed between the AIP and CSC ASA's? Or would I setup the ASA's for context based Active/Active failover to interconnect the ASA's to the existing units, but I still see a need for a switch.
View 1 Replies
View Related
Mar 8, 2011
As we are all aware that the ASA8.3 has quite some changes interms of configuration method.
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.
View 2 Replies
View Related
Feb 12, 2013
I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?
View 5 Replies
View Related
May 28, 2012
I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
The question is, what is the better method to migrade the configurations? Manually?
What is the better version for 5525-X? 8.6.1?
View 4 Replies
View Related
Oct 25, 2012
I was trying to upgrade an ASA to from 8.2.4 to 8.4.4, and I began receiving the following migration errors (the IP addresses have been changed to protect the innocent):
ERROR: MIGRATION: The following ACE is partially/not migrated to Real IP, as it could result in more permissive policy. Please manually migrate this ACE. permit esp host 1.1.1.1 host 2.2.2.2
I got a TON of these, in fact the migration, and these errors ran for over 24 hours before I gave up, powercycled the unit and forced 8.2.4 to boot through ROMMON. This was a secondary unit, that's why I let it go this long.
What I don't understand is that we do not have anything in the configuration for ESP.
View 1 Replies
View Related
Oct 3, 2012
I don't seem to be able to find a migration utility for PIX rel 8.0.4 to ASA 8.6 is there one available will save a lot of time
View 1 Replies
View Related
Aug 26, 2012
Looking at migrating from the following:
PIX-515EPIX Security Appliance Software Version 8.0(4)Device Manager Version 6.1(5)51
to
ASA5515Cisco Adaptive Security Appliance Software Version 8.6(1)Device Manager Version 6.6(1)
Is this migration directly supported, or do I need to downgrade first?
View 5 Replies
View Related
Jan 23, 2013
I have ASA-AC-M-5520, can we migrate the license to ASA-AC-M-5585
View 1 Replies
View Related
Sep 24, 2012
I'm testing upgrading an ASA from 8.2.5 to 8.4.4. During the the upgrade, it change all of my ACL host entries to objects. But I noticed that the keyword "host" is still a valid option when creating an ACL.
I'm trying to understand why this change is made during the migration.
View 3 Replies
View Related
Apr 23, 2013
I am about to carry out a migration from ASA 5550 to ASA 5555-X, however I cannot find any detailed document or reliable tool for this migration.
View 4 Replies
View Related
Dec 18, 2012
We're migrating as mentioned in the subject and this new format is quite a departure from previous iOS versions so I thought I'd post the configs of the PIX and the ASA and ask if someone is willing to compare them and verify that it is correct and should be basically plug and play. The xxx.xxx.xxx are outside IP addresses and the yyy.yyy.yyy are inside addresses. .
Existing PIX config
PIX Version 6.3(4)
interface ethernet0 100full
[Code]......
View 2 Replies
View Related
Jan 22, 2013
Customer has a ASA5540 at their main location and need a new ASA5500 for a DR site.
Can I simply take a config file from an ASA5540 and easily drop it on an ASA5545-X or what ever?
They are going to be using it as a VPN concentrator primarily.
Or are there going to be issues since the 5540 is running 8.4(5) and the 5545-X? Or if they upgrade to 9,0(1) or higher, then they should be the same?
View 2 Replies
View Related
Nov 26, 2012
My company (in Healthcare) is going to be changing ISPs for our internet connectivity, and with this change comes a new external IP block. So I need a scheme to migrate over all of my existing VPN tunnels and other items over to new IP addresses. We do have an external router which I plan on doing a route-map to handle which traffic the ISP should go to based on IP. My big concern is for the ASA 5510. Can I setup a second outside interface on the new IP range? Then migrate my VPN tunnels over one-by-one? A drop-dead cutover date is just not possible with all of the external companies that I have to contact to get VPN tunnels updated with. If it's not possible, we have in our budget to get another 5510 next year as a redundant unit. I may be able to get that early and just migrate from one firewall to another.
View 3 Replies
View Related
Mar 23, 2011
in the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
But my ACL's have not been migrated to real ip address. In my migration log:
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?
View 3 Replies
View Related
Feb 22, 2012
when I migrated the ASA config from 8.2 to 8.3, in all groups the group members has been replaced by the IP address object. However, the "name" for this object has been migrated, but there is the "object network name" configuration missing.
What I can do now is that I can open the new created object in the ASDM, search for the object with this IP address and then enter the object name I had before. When I apply the config, ASDM then creates the object and replaces all affected objects in all groups, by replacing the object group memeber "network-object host hostname" with "network-object object hostname".
Do you know if there exists an automated way, which checks all the groups for members "network-object host", creates the "object network" and replaces the "network-object hosts" with "network-object object" within the group? As long we have a lot of groups which contains partially > 50 members?
View 2 Replies
View Related
May 20, 2013
I've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.
-INSIDE to DMZ is working fine. (through ASA)
-INSIDE to OUTSIDE is working fine. (through ASA)
Below is the configuration from my PIX (where everything works just fine) as well as the one on the ASA (where there is a problem), what could be the cause?In the below case the DMZ hosts from 11.1.10.0 aren't able to access SMTP services (through ASA) and the OUTSIDE users aren't able to access DMZ web server (11.1.10.40) through ASA, this all just works fine with PIX.
object-group network inside_subnet_all network-object object inside_subnet_a network-object object inside_subnet_b network-object object inside_subnet_c network-object object inside_subnet_d network-object object inside_subnet_e network-object object inside_subnet_f network-object object inside_subnet_g network-object object inside_subnet_.access-list OUTSIDE extended permit tcp any object host-11.1.10.40 object- group WWW-HTTPS access-list DMZ extended permit object SMTP object dmz_subnet any access-list INSIDE extended permit ip
View 1 Replies
View Related
Apr 24, 2011
I have just upgraded a ASA5510 from 8.2 to 8.3 using migration tool.All seemed to go well, still double checking the config as this is a bench test of upgrade prior to filed upgrades.
Anyway one thing that is slightly frustrating is that the migration has expanded all of my access-lists, so we maybe had 10 lines of config relating to access-lists based on access-groups, now we have hundreds of lines.On ASDM this is bad enough but on CLI with show run its a bit of a bind.
Is there any way to un-expand the access list or do I simply delete and start again using my access groups.
View 2 Replies
View Related
Feb 28, 2010
Can any ASA 5500 in particular the ASA5510 firewall support jumbo frames (i.e. greater than the default standard 1500 Bytes frames)?. I plan to use the ASAs to setup a point-to-point IPSec tunnel and need an Application frame of 4Kbytes intact and not segment it.I have done little checking on the Cisco Website and see it mention of Jumbo frames on the 5580 on 10Gig interface but didn't see mention 5510. 5580s are way over-kill and expensive for what I need is to run a mission critical one IPSec point-to-point with maximum of no more than 100Kbps so 5510 is perfect for me but not sure if it can carry the jumbo frame?
On the routers and switches it's the MTU settings and they are configurable per interface and I am OK and the circuit is T1 which the Telcos said it's OK since it's physical layer so the only unkown is the firewall.
View 2 Replies
View Related
Jan 25, 2012
I purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
View 1 Replies
View Related
Mar 25, 2011
I was under the impression that those global addresses that we used with NAT were from the outside IP addresses range?Lets say my outside IP address is idk 192.112.40.11 /30 and I only had two usable IPs (since you can't use network and broadcast IPs) so how would I set up NAT for a couple of Inside addresses with a shorting of addresses like this? Idk if that makes sense what I'm trying to say
View 3 Replies
View Related
Jun 5, 2012
We have a configuration where we go through a firewall (ASA 5510) to a router, which decides if it is internet traffic or another network used for colleges etc in Canada called SR Net. If it is internet traffic it then goes through another ASA 5510 to the internet.
When we tested we were not seeing the speed of our internet (about 1/10th). We tested by putting the laptop before the internet firewall and we get the throughput. We also threw the test laptop before the router and we got the throughput expected. But when the test laptop is before the internal (first) firewall we get about 1/10th the speed. We are Nating on both firewalls, so from the inside we are going from a private IP to a Public IP (so it can go to SR Net is need be), then Nating again to the internet IP on the second firewall.
View 2 Replies
View Related
Apr 20, 2012
I'm not sure how I turn off my firewall
View 4 Replies
View Related
Apr 23, 2012
I am currently working on our Cisco voice platform at work.
Our Cisco firewall engineer has left and I have been given the task of looking after the firewalls as our Chief Exec seems to think that Cisco Voice is similar to Cisco ASA firewalls,
Are there any books/videos out that you can recommend to learn the about firewalls quickly.
View 1 Replies
View Related
Jun 14, 2012
I have two firewalls in 2 different locations. They act as primary and secondary for my WAN connectivity. I would want a way to synchronize access-lists in both without manually replicating.(access list, NAT and Route)FW model cisco 5580
View 1 Replies
View Related
Jun 8, 2011
I am trying think of a better way to provide redundancy on some internally protected networks. We maintain our own WAN/backbone between our primary site and backup site. Is it possible to have two Cisco ASA 5550s in setup for failover at completely different sites as long the networks connected are available?
View 3 Replies
View Related
Aug 13, 2012
i have to open ports for vedio conferencing in my Firewall configuration ,
View 1 Replies
View Related
Jun 14, 2011
I have two ASA 5510 with Security Plus license and Shared SSL VPN licensing enabled.
The problem is that the client get “Session could not be established: session limit of 25 reached” but ther is only 6 ssl vpn user connected with AnyConnect.The software on the firewall’s is 8.2(1)Is there any BUG in this software related to this problem?
View 1 Replies
View Related
Oct 16, 2012
I've been trying to open ports 5800 and 5900 for UltraVNC and checking them with online port checkers, but they are always listed as closed. I've even tried taking town windows firewall, my router firewall (although as soon as I disable and apply, it automatically switches back to enabled again), and also DMZ'ing my router. I wonder if it might have something to do with my new modem, but in the config page for that, the advanced settings are locked out. the modem is an arris TM722G, and the router is a linksys wrt-54G with DDWRT firmware.
I'm running windows 7 x64 and using a static local IP, I want to be able to use DynDNS to connect to UltraVNC.
View 19 Replies
View Related
