Change A Computer From One Network To Other In Order To Use FTP Server?
Mar 20, 2013how can I change a computer from one network to other in order to use FTP server
View 4 Replies
ADVERTISEMENT
Cisco Firewall :: Change Order Of Nat Rules (v8.4)?
Sep 26, 2011I have a question about the new nat implementation in an ASA 8.4. when I perform a "show nat" I get the following result:
1 (outside) to (inside) source dynamic any NAT-SSL-VPN_172.30.100.250 destination static 00B_172.30.100.0_24 00B_172.30.100.0_24
translate_hits = 26, untranslate_hits = 0
2 (inside) to (outside) source static LAN-HOST_172.30.100.11_LNX01 WAN-HOST_84.199.44.2_32_LNX01 service TCP-80-HTTP TCP-80-HTTP
translate_hits = 0, untranslate_hits = 0
Is it possible to change the order of the nat rules without removing and reapplying the rule on position 1 ? (both rules have to stay in section 1)
Computer Name Change On A Network?
Sep 14, 2011If I change a computer name on a Microsoft network, what are the repercussions?
View 1 Replies View RelatedWay To Change How The Network Identifies Computer?
Mar 10, 2012My roommate has made himself network administrator of our home network and is using it to leverage favors out of me. He has some how band my computer from the network so that even though I know the password I still can't connect. I need a way to change how the network identifies my computer so that I can get back in to the network. I have already changed my computer's Name and description and that didn't work.
View 1 Replies View RelatedCisco Wireless :: 7500 Can Use Customer Radius Server In Order To Authenticate
Feb 5, 2013We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 Replies View RelatedChange Network Icon From A Computer To Signal Bars?
Oct 13, 2012change the network icon to the icon that shous the list of networks available with the strength bars
View 1 Replies View RelatedNetwork Settings - Can't Change DNS Server
May 21, 2012I can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.
View 3 Replies View RelatedAdding 2nd Wireless Router To Network In Order To Extend Range?
Mar 25, 2011i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.
View 5 Replies View RelatedTo Setup Home Network With Old Computer As Server
Nov 21, 2011I am just wondering how to set up a home network with an old computer used as a server... we will have a wii, ps3, lap top, and 2 desktops connected to the network as well as two dell printers. The laptop runs windows XP and the desktops run windows vista. The old computer will will use as a server is windows xp or windows 98 (most likely wont use that computer). What will i have to do to set this up and run the server as well as the network.
View 9 Replies View RelatedCan't Connect To Server - Remote Computer Not Available On Network
May 1, 2011I get this message when trying to connect to server the remote computer is not available on the network.ISP provider was changed so was IP address.
View 8 Replies View RelatedServer Missing From Computer Listing In Network Neighborhood
Aug 26, 2011We have a network setup on a Domain. Yesterday all computers were talking to one another correctly and were visible. We had a Linksys e1500 Wireless router when everything was running smoothly. We upgraded to a Linksys e3200 and swapped it into the system pulling the e1500 out.
No settings or configurations were changed on the server or any of the client machines, but as soon as the e3200 was installed and put in place all client machines on the network were visible to one another but the server was not.
After scratching my head and not having a suitable answer I decided to just put the e1500 back into our infrastructure and remove the e3200. Imagine my dismay when the server was still missing but all other computers were visible on the domain. Obviously the e3200 wasn't and isn't the issue, but it was literally the only change we made to our system in that period between... visible server and no visible server.
Anything I can check for a server running Windows Server 2008 R2 Standard that has mysteriously vanished without explanation when it has been working fine for 4 weeks prior without fault?
Router Or Modem Settings - No Computer On Network Can Reach Server
Feb 26, 2013We have a Comcast business class cable modem with a static IP address. There are two devices hardwired to it; a server and a Linksys WRT610N, The server is hardwired to it with port forwarding set for ports 21, 80 and 5900. It works perfectly and can be reached as intended by the outside world but not by our own network. Our Linksys WRT610N is hardwired to the modem. All computers on the wireless network see each other and can access the internet perfectly. So all seems well enough. BUT, no computer on our network can reach our server. Using the domain name or VNC connections from inside our system results in time outs and no connection.
View 12 Replies View RelatedAdding A Computer To A Windows Small Business Server Network?
Apr 14, 2011At my office we have a dell server running windows small business server 2003, there are around 15 computers on our network running mostly windows 7 (a few with XP). I am wondering how difficult it is to add a computer to the network so it can log into our domain and all that.I just had to reformat one of the computers and would normally wait for our network guy to do it remotely but If i could do it myself it would save time (and money). I am already an administrator and basically i just need to make it so the log in prompt when windows starts has our office network listed as the domain instead of jus the local log in. It is a dell running windows 7 64 bit.
View 5 Replies View RelatedLinksys Wireless Router :: E4200 As NTP Server For All Computer On Network?
Jul 8, 2011My old dLink DIR-655 router could serve as an NTP server for all the computers on my network. It would get the time from the dLink NTP time source and allow me to sync all the systems on my home network off the DIR-655.
I had to replace it with this new E4200 but don't see an option for it to act as a time source for my internal network.
Can this router be used for this function?
Can't Change Computer Name Without Changing Workgroup Name?
Feb 8, 2011I can't change only computer name. But if I change both computer name and work group, I could change it.Actually, I want to change only my computer name, not my workgroup name.
View 2 Replies View RelatedHow To Change Computer Wireless Adapter Name
Nov 30, 2012my mac adress is blouck frome the roter i am change my mac address ip address but not conctin the same roter .and conect to other routers.
View 1 Replies View RelatedCisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedChange The Default Gateway Of RDP On Server?
Oct 11, 2011I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
View 3 Replies View RelatedServers :: How To Change Client As Server
Mar 8, 2011how to change a clinet as server for all the remaining clients in a local area network
View 3 Replies View RelatedCisco :: LMS 3.2.1 Can't Change Smtp Server IP
Aug 23, 2012I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
View 1 Replies View RelatedCisco :: Change Web Interface Ip Of NCS 1.1.1.24 Server
Sep 10, 2012I have configured the NCS 1.1.1.24 and its running fine, but i used the IP address 10.18.20.7(it was the WCS server), but now I want to use 10.18. 20. 8 (NCS Server) ip address.
so what should i do to change the ip address: I know only 1 thing that is, change the ip of the interface gig 0 .My main task is to run WCS and NCS parallal.
Change Existing Server Ip Address To A Different Range?
Jan 22, 2013how do i change existing server ip address to a different range,,what changes do i have to make?
View 3 Replies View RelatedCisco Routers :: Srp521 Change To Vpn Server?
Nov 13, 2012I have a srp521 and want to set it up as a vpn server so I can connect back from outside.On the router under the vpn tab I only have
Site to site IPSec VPN
IKE Policy
IPSecPolicy
GRETunnel
VPN Passthrough
Page 191 of the srp500 manual says Click VPN > Cisco VPN Server > Group. The Group window opens The manual also says only the serer or Site to site will work at one time, so where do I make the change to bring up the vpn server option?
Cisco :: LMS 4.1 - Change Server Name In Report Emails
Feb 13, 2012Currently, my report links are displaying the server as "lms" instead of "lms.domain.net". Where do I change this within LMS?
View 2 Replies View RelatedServers :: Change A Windows 2003 Server Name Through Client?
Mar 8, 2011how to change a windows 2003 server name through client
View 1 Replies View RelatedInternet Works Only With Fixed DNS Server - How To Change To Automatic
Jul 19, 2012It works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
View 1 Replies View RelatedCisco :: LMS 4.0 Fails To Start After Change Of Server Hostname?
Aug 9, 2011we are running LMS 4.0 on Windows Server 2008, and just changed the hostname of the server, as the former on reflected it being a test system. However, after rebooting the server (as required by windows), the LMS application did not launch.After rolling the windows server back to the old hostname, the LMS started working again.Why is this? Isnt it possible to change the server hostname after the LMS has been set up for the first time?
View 2 Replies View RelatedCisco Wireless :: 5500 Controller - Change IP Of WCS Server?
Aug 27, 2011I have two 5500-controllers and one WCS-server. Now I will have to move the WCS-server to another subnet and change the IP, but it will keep the name.Will that effect the connection between the controllers and the WCS?Do I have the change anything in the configuration on the controllers or the WCS-server?
View 3 Replies View RelatedD-Link DIR-615 :: Internal Server Error 500 - Change Router DNS To OpenDNS
Apr 4, 2013Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.
View 4 Replies View RelatedLinksys Wireless Router :: Change Media Server Name (E4200v2)
Mar 25, 2013Is it possible to change the DLNA Server's name? Cisco49129 just doesn't have a nice ring to it.
View 1 Replies View RelatedLinksys Wireless Router :: Possible To Change E4200 To Media Server?
Nov 30, 2012Would it be possible to change it to something else like serviio?
View 3 Replies View RelatedD-Link DIR-655 :: FTP Software Would Hang / Change Directories On Remote Server
Jun 17, 2011One of the companies I work for uses a DIR 655 router. I'm having some trouble using FTP there.Initially the problem was that FTP software would hang or give errors when trying to change directories on the remote server. This problem went away when I switched from passive FTP to Active FTP.Now using Active FTP, the files appear to be uploaded with no problem. However, on closer inspection, the uploaded file has 0 bytes on the remote server.
We are uploading from a Windows 7 machine and uploading to our Web Hosting Company's Windows Server. I've actually written the one piece of software that is showing this problem but it uses a widely known open-source FTP library written in .NET. I've never encountered either of these problems with my software until I encountered the DIR-655.The other FTP software client I've tried is FileZilla. It has the same problem, 0 bytes files when using Active FTP.
One solution I've seen on DSLReports was to disable the Stateful Packet Inspection part of the firewall (known as SPI). This is really not a good solution for two reasons. Number one, I do not have access to the router's firmware/ configuration. Number 2, the company has a DIR-655 because they want the additional security. If we're going to disable SPI it just defeats one of the major purposes of owning the DIR-655.
Cisco Wireless :: 5508 - NAC Guest Server Allow Password Change
Dec 25, 2011i see there is an option to "allow password change" or "force password change" for guest roles in the NGS. But when i created a guest account using this guest role, after webauthentication , there is no prompt to change password. Is this the intended behaviour or is there anything else that i need to configure. Looking at it, i am not sure how the NGS would allow a "guest user" to really overwrite the password by allowing password change. ? is that not a security risk as well for the NGS ? my setup has 5508 anchor controller and NGS communicating via RADIUS.
View 7 Replies View Related