D-Link DIR-655 :: FTP Software Would Hang / Change Directories On Remote Server

Jun 17, 2011

One of the companies I work for uses a DIR 655 router. I'm having some trouble using FTP there.Initially the problem was that FTP software would hang or give errors when trying to change directories on the remote server. This problem went away when I switched from passive FTP to Active FTP.Now using Active FTP, the files appear to be uploaded with no problem. However, on closer inspection, the uploaded file has 0 bytes on the remote server.

We are uploading from a Windows 7 machine and uploading to our Web Hosting Company's Windows Server. I've actually written the one piece of software that is showing this problem but it uses a widely known open-source FTP library written in .NET. I've never encountered either of these problems with my software until I encountered the DIR-655.The other FTP software client I've tried is FileZilla. It has the same problem, 0 bytes files when using Active FTP.

One solution I've seen on DSLReports was to disable the Stateful Packet Inspection part of the firewall (known as SPI). This is really not a good solution for two reasons. Number one, I do not have access to the router's firmware/ configuration. Number 2, the company has a DIR-655 because they want the additional security. If we're going to disable SPI it just defeats one of the major purposes of owning the DIR-655.

View 1 Replies


ADVERTISEMENT

D-Link DIR-615 :: Internal Server Error 500 - Change Router DNS To OpenDNS

Apr 4, 2013

Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.

View 4 Replies View Related

TP-Link 3G/3.75G Router - Internet Connection Hang After Few Mins Using HUAWEI E392 On TL-MR3220

May 4, 2013

I had my exisiting Huawei 3G Dongle replaced with a new LTE USB Dongle Huawei E392 from M1 Singapore. The router dectects it and I was able to get on to the Internet. But every after few mins, the connection will just hang and I have to go into the router to re-establish the connection.

View 2 Replies View Related

D-Link DIR-655 :: How To Connect LinkSys Wps54gug A Remote Wireless G Print Server

Apr 12, 2011

My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?

View 1 Replies View Related

D-Link D-ViewCam :: DCS-932l Remote Streaming / Recorded Viewing As Part Of Server Software

Aug 10, 2012

I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Configure Ftp Server For Remote Access Of Shared Storage HDD

Jan 26, 2013

Region : Singapore
Model : TL-WDR4300
Hardware Version : V1

I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.

View 6 Replies View Related

Cannot See Shared Directories From Other Machines

Jun 25, 2011

On my home network, I have several shares on my PC. But I dont seem to be able to even view the shares from other machines. If I put the IP address into an explorer window (\192.168.0.4) on another machine I get the message: "\192.168.0.4 is not accessible. You may not have permission to use this network resouces. contact your network administrator etc etc". So I cannot even bring up a directory list. There are no problems for me connecting to network shares on other machines from this machine that is refusing connections. That has all happened since I reinstalled windows. I reformatted the system partition and since then I cannot get the shares working again (they used to work fine). The shares are in a data partition that was not reformatted. This is really winding me up, as there never used to be a problem, and I cant think of anything else to look into, short of delving into the registry, and I wouldnt know where to look.

View 3 Replies View Related

Linksys Wireless Router :: E2500 Won't Share Directories Or Files

May 4, 2013

I replaced a WRT54G with an E2500. The wired PC is running XP SP3, the wireless PCs are (1) Win 7 and (1) XP SP3. Print sharing works fine, but all file shares on the "host" PC are failing. I ran "net share" and turned off all shared directories on the "host" and the same on the wireless PCs, then rebooted all. The Win7 PC sees the single directory I set up to share, but when I try to open it, I get a message that the directory is inaccessible (possibly because of permissions) and that "There is not enough server storage available to process the command".Wireless XP PC gives the same error, but can access the printer, and sees the directory share on the "host".

View 2 Replies View Related

Cisco Wireless :: Aironet 2600 / WLC With Authentication Against Two Separate Active Directories?

Feb 22, 2013

I am evaluating a Cisco wireless solution for our building. The building is occupied by two separate but related companies, which share some basic network infrastructure (some switches, an Internet connection, a DMZ environment), but which have two completely separate "Windows networks" with separate Active Directories. Each of these two networks are placed behind separate Microsoft TMG firewalls, each of whose external NIC are connected to the same DMZ network.
 
a) Acquire a set of Aironet 2600 APs and a controller, b) establish a BYOD SSID to be share between the two companies and guests, connected to the shared DMZ network, c) establish two additional separate SSIDs - one for each company’s staff, each authenticating against the appropriate AD-environment (incidentally, one is a straight Windows Server 2008 R2 environment with a TMG 2010 firewall and the other uses Windows Essential Business Server, so based on Window Server 2008).
 
Is that even possible with a single WLC?We are on 3 floors and about 60 people total. I am thinking that we can make do with 5 or 6 APs. Without having looked into it much, the 2500 controller looks good. Agree?

View 2 Replies View Related

Cisco WAN :: ASA 5505 Remote WAN IP Change?

Dec 6, 2010

There is a site I oversee that is moving to a new ISP. The drive is 2 hours round trip and I need to do is change an IP. DHCP is being handed out by the internal Domain Controller and all the workstations point to the server for DNS. Will the following commands inputted over an SSH putty session into the current WAN IP change the IP and allow me to hookup to the new ISP? The plan is to copy and paste the following commands into global config mode. Currently they are using DHCP on the WAN side which I do not approve of and their external route is pointing to the internal IP of 192.168.1.1. Things still work but I want to do away with this. Will these commands get the job done?

interface vlan 2ip address 68.x.x.2 255.255.255.240exitno route outside 0.0.0.0 0.0.0.0 192.168.1.1route outside 0.0.0.0 0.0.0.0 68.x.x.1

View 7 Replies View Related

Group Policy Change On Remote Machine?

May 27, 2011

I have 4-5 machines connected to each other in network which are in workgroup. Now I want to change one group policy on remote machine. The name of that policy is " Network access: sharing and security model for the local accounts :- Guest only" . How can I change this policy from remotely?

View 1 Replies View Related

Cisco VPN :: ASA 5520 / Change Peer IP Of Remote VPN?

May 25, 2012

I have an ASA 5520 with multiple site-to-site VPN's.  A remote customer has changed their Public IP address and now the VPN has gone down.  How can I easily change the peer IP of the remote site to the new one without have to put the pre-shared key in again as we don't know what it is and they don't manage their firewall.

View 7 Replies View Related

Cisco WAN :: Remote Change Outside IP Address For ASA5505

May 23, 2011

How to remotely changing ip address for my ASA5505.

View 1 Replies View Related

Cisco VPN :: ASA 5510 - Remote Access VPN Failed After WAN-IP Change

Jun 23, 2012

Router: ASA 5510
 
We have changed the ISP, so therefore new wan ip-addresses.
 
Internet works, and site-to-site vpn works, but I'm failing to localice why the remote access vpn won't work.

View 10 Replies View Related

Cisco Firewall :: 5510 Remote Access VPN / Change The Outside Interface IP

Dec 19, 2012

I have a Cisco 5510 which has remote access VPN configured.Now I have new block of IP address, is there a way I can just change the outside interface IP so that people can remote in without doing anythng else?Or if I coulds be taught to create a new one.Or best way to approcah this issue?For example: it was 67.64.x.x now I need to change to 64.44.x.x.

View 1 Replies View Related

Cisco VPN :: ASA5510 / Change Split Tunnel And Not Allow Access To Internet From Remote Location?

Mar 28, 2010

I have successfully setup the AnyConnect VPN (connecting to our ASA5510) and have split tunneling configured.  My remote users can access inside LAN servers as well as the Internet from their remote location.  What I would like to know is is it possible to change the split tunnel and not allow access to the Internet from the remote location but force the remote client to go through the VPN and out our internal edge firewall to the Internet?  Basically I need my remote clients to access the Internet but I would like for their Internet traffic to go through the VPN and out our edge firewall.  This will allow the same security as if they were sitting in the office.

View 4 Replies View Related

Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2

Jul 5, 2012

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

View 2 Replies View Related

Cisco Switching/Routing :: 1721 / Change Remote Site Network Configuration With / Without Losing Connection?

Sep 19, 2012

My company just assumed management of a remote entity.  The network has several misconfigurations and I need to make some network modifications from my office w/o losing access or incurring lengthy outage to the clients.  The network consists of 1721 router and  three 2960 switches.
 
- I only have access to the router from the Internet.  I telnet off the router to the 3 switches.
 
The site uses a single class C 192.168.1.0 / 24.  The router is running RIPv2 even though this is the only network.  The prior network person (contractor) set up separate native vlans on each switch and all the ports are defined as Native trunk and access are defined to the VLAN interface  assigned to the switch.  So of course the logs are flooded with Native VLAN mismatch,  Each 2960 switch is a VTP server but has no VTP domain.  
 
basic network layout:
 
Internet  => Eth [Cisco 1721] => Fa 0 192.168.1.254  ==> [SW1]
 [SW1]
 interface Vlan1
no ip address
no ip route-cache!interface Vlan220ip address 192.168.1.219 255.255.255.0no ip route-cache

[code]....
 
!interface GigabitEthernet0/1description SW2 Gi0/1switchport access vlan 204switchport trunk native vlan 204!interface GigabitEthernet0/2switchport access vlan 204switchport trunk native vlan 204!interface Vlan1no ip addressno ip route-cache!interface Vlan204ip address 192.168.1.224 255.255.255.0no ip route-cache Normally, I would assign the current 192.168.1.254 to a subinterface to Router Fe 0/0 but with each switch having its own native VLAN I am afraid I will lose connectivity to the downstream switches -- my only access is telnet off the Cisco1721 Router. 

View 3 Replies View Related

All Browsers Slow / Crash And Cause OS To Hang

Oct 16, 2012

Loaned old laptop when hard-drive went out of my own. I knew it would need some maintenance ie defrags, cleanups, updates etc. and have been trying to do so... in the process I am having a very difficult time as all of my browsers (that I thought were updated) are slow, hanging, crashing and causing my entire pc to freeze or hang.

View 14 Replies View Related

Cisco WAN :: 877 Router Freezing / Hang

May 20, 2011

I have Cisco 877 router it is losing connectivity almost after every one hour (freezing or hang) after reboot comes up back.

View 3 Replies View Related

Cisco VPN :: 2811 HTTPS Sites Hang Through Web Vpn

Jun 27, 2010

Using webvpn on a 2811 w/ adv ent 12.4(20)THTTP sites work fine (in the url-list)
 
But when we try to use an HTTPS site, clicking on that site just hangs forever.  Debugs show the connection is making it, and the servers are getting the connections...
 
The destination servers are using self-signed certs, as well as the router.  They are not requiring client certs.

View 5 Replies View Related

Cisco Routers :: WIN7RDP - Sessions Bog Down And Then Hang Over VPN

Aug 8, 2012

I have  DSL line that gives 7mb down and 768k up. I have 2 users running  win7 RDP session and after a few hours the session is unusable its so slow and then eventually it hangs . don't know where to start.

View 1 Replies View Related

Change The Default Gateway Of RDP On Server?

Oct 11, 2011

I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?

View 3 Replies View Related

Servers :: How To Change Client As Server

Mar 8, 2011

how to change a clinet as server for all the remaining clients in a local area network

View 3 Replies View Related

Network Settings - Can't Change DNS Server

May 21, 2012

I can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.

View 3 Replies View Related

Cisco :: LMS 3.2.1 Can't Change Smtp Server IP

Aug 23, 2012

I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;

View 1 Replies View Related

Cisco :: Change Web Interface Ip Of NCS 1.1.1.24 Server

Sep 10, 2012

I have configured the NCS 1.1.1.24 and its running fine, but i used the IP address 10.18.20.7(it was the WCS server), but now I want to use 10.18. 20. 8 (NCS Server) ip address.
 
so what should i do to change the ip address: I know only 1 thing that is, change the ip of the interface  gig 0 .My main task is to run WCS and NCS parallal.

View 1 Replies View Related

Cisco LAN :: 3750 - Range Command / Session Hang

Oct 18, 2012

I've noticed that when using the range command to configure multiple interfaces on a 3750 the SSH session oftens hangs. It's seems the more interfaces in the range command the more often it hangs. I have a feeling it also spikes up the CPU. Doesn't seem to be related to a specific version of code.

View 6 Replies View Related

Change Existing Server Ip Address To A Different Range?

Jan 22, 2013

how do i change existing server ip address to a different range,,what changes do i have to make?

View 3 Replies View Related

Change A Computer From One Network To Other In Order To Use FTP Server?

Mar 20, 2013

how can I change a computer from one network to other in order to use FTP server

View 4 Replies View Related

Cisco Routers :: Srp521 Change To Vpn Server?

Nov 13, 2012

I have a srp521 and want to set it up as a vpn server so I can connect back from outside.On the router under the vpn tab I only have
 
Site to site IPSec VPN
IKE Policy
IPSecPolicy
GRETunnel
VPN Passthrough
  
Page 191 of the srp500 manual says Click VPN > Cisco VPN Server > Group. The Group window opens The manual also says only the serer or Site to site will work at one time, so where do I make the change to bring up the vpn server option?

View 1 Replies View Related

Cisco :: LMS 4.1 - Change Server Name In Report Emails

Feb 13, 2012

Currently, my report links are displaying the server as "lms" instead of "lms.domain.net".  Where do I change this within LMS?

View 2 Replies View Related

Cisco Switching/Routing :: 3560 Switches Hang Off With Sub Interface

Jul 22, 2012

Was building a small network in Cisco Packet Tracer and ran in to an issue.  I have 4 routers running OSPF, and off one of the routers I have 5 3560 Multilayer switches.  The router that the switches hang off of, I have a sub-interface with dot1q encapsulation, set for vlan 10 and an IP Address. 10.14.16.1/24.  The switches have interface vlan 10 configures, and have IPs in the same subnet.  From that router, I can ping/telnet to all the switches without issue.  My problem arises when I try and reach those switches from any other router.  OSPF is set to redistribute static and connected subnets.The routing table is populated correctly on all the routers.  When I ping and trace the packet, it looks like it makes it all the way to the respective switch, but the packet never makes it back.  I've played with the default route on the switches to no avail.  Am I trying to implement this incorrectly, or am I just missing something?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved