D-Link D-ViewCam :: DCS-932l Remote Streaming / Recorded Viewing As Part Of Server Software
Aug 10, 2012
I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.
View 1 Replies
ADVERTISEMENT
Apr 1, 2012
I have just purchased 3 DCS-932L'S and installed 3.11 D-ViewCam software. I have done my best to configure the mainconsole correctly so that my cam's will record on motion based occurances on a weekly schedule of 24 hours a day everyday. I have a lot of evidence that the system is recording as when I have the console open that there is motion detected and there are 3 folders in my nas unit that has tons of .dat files in them. My problem comes in when using the playback system. When I select the search by date/time button and locate the folder that is for a the camera I am interested in playing video for the results never show up!
View 1 Replies
View Related
Dec 21, 2012
I have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2. When I open the DviewCAM main console I have picture. When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet. [code]
View 5 Replies
View Related
Apr 17, 2012
How do i use dcs-932l with d-viewcam. I tryed to connect but d-viewcam does not recognize model.
View 1 Replies
View Related
Mar 27, 2013
How to setup recording on dcs 932l?
View 1 Replies
View Related
Dec 20, 2012
I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies
View Related
Apr 16, 2011
When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies
View Related
Jul 22, 2012
I ran the setup CD and can access my camera from inside my local network. When I try to access it from outside, I can access the camera fine but the video stream is black. I tried RTSP ports 554, 2080 and 5632 with no success (of course I port forwarded the dsl modem as well). My dsl modem is a westell 7500 and my ISP is frontier communications. I contacted their support tech and at first he ran me through the exact port forwarding sequence I had already done on the modem. He then went away for a while and came back to say that I need to upgrade to their fixed internet address service. I understand dynamic DNS and don't think this is an issue because I can contact the camera OK, I just don't get the video through (black screen). Another issue is that the camera is reporting PPPOE 'failed'. The support tech has given me two PPPOE user names and passwords but neither work. The support tech said that they do require PPPOE.
View 3 Replies
View Related
Oct 22, 2011
My Brother-in-law, who lives in Singapore, uses his DCS-2121s (2x) for monitoring his newborn and it works great!
Me and my wife, who lives here in the US, always views those IPcams through my web browser from my PC (firefox 7.1).
I was just wondering if there is a different way to watch those cameras using my computer. I was looking for a dedicated D-link APP or Program so I don't have to use the browser anymore.
BTW, my brother uses dyndns with his DCS-2121.
View 3 Replies
View Related
Feb 22, 2013
I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies
View Related
Mar 27, 2013
I have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
View 5 Replies
View Related
Oct 7, 2011
i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies
View Related
May 26, 2011
I am having linking a computer to our SBS server. The computer in question is set in a warehouse on our site. We have a leased internet connection which is used on a number of different offices. The sbs-server has an IP address of 192.168.50.254 with a gateway Ip address of 192.168.50.1. The firewall on this network has an external IP of 10.50.0.37 with a gateway of 10.50.0.254 and this links to the leased line equipment. The external IP address for this network is 62.7.70.237. The PC in the warehouse has an IP address of 192.168.0.2 attached via a router to the leased line. The routers Ip address is 192.168.0.1, the external IP address is 10.50.0.55 and a gateway of 10.50.0.254. This links to the leased line and seems to have an external Ip address of 62.7.70.238. My issue is that I want the PC in the warehouse to be able to connect in some way to the SBS-Server. I cannot seem to access it via the external IP or the gateway (10.50.0.37).
View 2 Replies
View Related
Apr 12, 2013
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies
View Related
Nov 30, 2012
I have a Linksys E1200 router.My problem is I have installed a camera system that allows remote viewing.I cannot access the system through the E1200 I am not very knowledgeable in net working.What do I need to do to access the DVR from a remote computer?
View 1 Replies
View Related
Sep 7, 2012
setting up ea2700 to enable remote DVR viewing?I have tried port forwarding and enabling remote management. But I can only access locally.
View 9 Replies
View Related
Oct 28, 2011
I purchases a Hauppage USB TV tuner and bought the software that allows live TV signals to be streamed to my home PC or android phone. Once I installed the software and ran a test, the remote access failed. The error message said I need to check the router's configuration. I know very little about configuring routers, but the model is WRT54Gv3.
View 1 Replies
View Related
Oct 29, 2011
I'm trying to set up VLANs in my network.So the first device after the internet cloud is my ISP modem/router. I don't really use the router part. The second device is my Linksys WRT54G router with DD-WRT firmware on it.Between the two, there is a subnet just for them. After the DD-WRT router, there is a subnet for my LAN.The third device is my netgear GS108T switch (with vlan support) to which almost all my computers are hooked up. One of those computers is my server that is domain controller and has the roles as shown in the image. What I would like to do is to create several virtual machines in Hyper-V. The trick is that I want to isolate them from the rest of my network. They should be able to access (and be accessed) from the internet but not the rest of my network. So my whole network should be in the same VLAN but each VM should be individually in separate VLANs.
1) I've allready created the VLANs on my Netgear Switch. I know my DD-WRT also has VLAN support. Do I need to create the same VLANs on that also?
2) How to configure the VLAN part of the Hyper-V server? (by the way, my server OS is Windows Server 2008 R2 with the hyper-v role, it's not the bare-metal hyper-v)Should my Virtual Switch be in VLAN 10 and my VMs in the other VLANs?Should the port (on the netgear switch) in which my server is connected, be in VLAN 10 (so that my server is accessible from every other computer in the network)?
View 6 Replies
View Related
Jan 27, 2010
I would like to start a new thread on possible enhancements/improvements on the new D-ViewCam v3.0.Allow Events (General Motion detection) to be visible in Playback timeline/period selection, similar to the way of Backup (and Remote Playback) timeline/period selection. Fixed in 3.01.Allow 30-second steps increments forward/ backward in playback. Current minimum is 1 minute.Allow jump to event during playback, from either log-viewer or inside playback (via extra button), similar to version 2.0xMention 64-bit compatibility in User- documentation/ datasheet (it is not there yet)Allow/implement multi-channel simulcast [remote] Playback (it is pre-wired) Allow/ implement multi-channel remote viewerBug: Fix Signal Lost event visibility in time/period selection (it does not show these events)Bug: Fix 64-bit hi-res (>1280x1024) "Resource" error. Fixed in 3.11.Bug: Fix Playback.exe crash when saving image/snapshot, while supplying wrong extension (reproducible by: Save as jpg, then supply name.asf, and it will die)Road_runner: Option to move app-window/screen to other monitor and/or resizeToppy: Support older model cameras (DCS-900/950)Toppy: Support multi-screen display (multiple windows)disaster: Option for a playback list similar to V2.03, select motion separately, instead of single stream.disaster: Allow for GUI to select cross-mignight period (can be done manually by setting start-date and -time)disaster: Elaborate more on Smart Guard in Docsdisaster: Allow for higher free space percentage threshold for overwriting old recordings disaster: Allow to program autopatrol to start and end on a scheduled timeBug: Use of < character in password causes deletion of ALL defined remote serversZippyDan: Remote Live Playback: playing video from more than one camera at the same remote site at the same time.
View 9 Replies
View Related
Jan 17, 2013
I just got another DCS-930L. I have set these up to work wirelessly before but my question is why can't I connect it directly to my ethernet port and be able to get into the web interface by typing the default IP address without using a utility or installation software? I have tried to assign a manual IP to it but that didn't work. So here is what I want to do: Plug the camera into the ethernet port of my MacBook Pro and just view what the camera sees.
View 7 Replies
View Related
May 8, 2013
In have the 942l and the mydlink Lite app on the iPhone. I have recording set up on the camera capturing in .mp4 format. I can view the camera on the phone fine. I can go the menu and select playback. I see the date of my recordings and the time. Each individual file is listed as you can see.
When I select any of these files, I get a black screen.
Do I need to change the rtsp URL? Anyone have this working correctly on the iPhone? If so, can you share your settings?
View 1 Replies
View Related
Jan 16, 2013
i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies
View Related
May 3, 2011
Given that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?
View 14 Replies
View Related
Jun 20, 2012
I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.
View 1 Replies
View Related
Jun 17, 2011
One of the companies I work for uses a DIR 655 router. I'm having some trouble using FTP there.Initially the problem was that FTP software would hang or give errors when trying to change directories on the remote server. This problem went away when I switched from passive FTP to Active FTP.Now using Active FTP, the files appear to be uploaded with no problem. However, on closer inspection, the uploaded file has 0 bytes on the remote server.
We are uploading from a Windows 7 machine and uploading to our Web Hosting Company's Windows Server. I've actually written the one piece of software that is showing this problem but it uses a widely known open-source FTP library written in .NET. I've never encountered either of these problems with my software until I encountered the DIR-655.The other FTP software client I've tried is FileZilla. It has the same problem, 0 bytes files when using Active FTP.
One solution I've seen on DSLReports was to disable the Stateful Packet Inspection part of the firewall (known as SPI). This is really not a good solution for two reasons. Number one, I do not have access to the router's firmware/ configuration. Number 2, the company has a DIR-655 because they want the additional security. If we're going to disable SPI it just defeats one of the major purposes of owning the DIR-655.
View 1 Replies
View Related
Jul 22, 2011
I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies
View Related
Oct 31, 2012
Is it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...
View 1 Replies
View Related
Apr 12, 2011
My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?
View 1 Replies
View Related
Mar 14, 2011
I having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.
View 1 Replies
View Related
Apr 3, 2012
Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
View 1 Replies
View Related
Mar 17, 2013
Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
View 9 Replies
View Related
Feb 26, 2012
This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies
View Related
Jul 10, 2012
I have (2) 942-L, and (1) 5222-L on one network. port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80. no matter if all 3 are connected to dViewCam, only two will work at a time. Disconnect any third, and they work fine. reconnect 3rd, and one disconnects intermittently. On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine. I know, I know, but I like DViewCam, because it's the only thing running the PC computer.
View 3 Replies
View Related
