Is it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...
View 1 Replies
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedGiven that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?
View 14 Replies View RelatedMy Brother-in-law, who lives in Singapore, uses his DCS-2121s (2x) for monitoring his newborn and it works great!
Me and my wife, who lives here in the US, always views those IPcams through my web browser from my PC (firefox 7.1).
I was just wondering if there is a different way to watch those cameras using my computer. I was looking for a dedicated D-link APP or Program so I don't have to use the browser anymore.
BTW, my brother uses dyndns with his DCS-2121.
I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies View RelatedI having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.
View 1 Replies View RelatedJust got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
I have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.
View 5 Replies View RelatedI have a camera set up in my kitchen and it works and I can view it in our house, on other computers or my iphone. But I can't view it from my work or anywhere outside our wireless range.It is a DCS-920. I have opened port 80, and checked it with a port checker and it says its open. I have bell as a provider with a 2 wire 2701hg-g modem.I read on here about someone else not having a gateway address or primary DNS. I don't know what to put in there. My camera address is 192.168.2.20.
View 4 Replies View RelatedIf i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software
View 1 Replies View RelatedI have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?
View 1 Replies View RelatedOn my website I want visitors to be able to see the picture from my DSC-2121 using the example [URL] without having to enter user name and password. To begin the URL with "http://user:passwd......." no longer works in IE.
View 2 Replies View Relatedway for one to view a camera stream without a username and pass? We are upgrading from older dlink cameras, I don't have the model handy. Previously we could just use the applet and it would display, I copied the applet from the new one but it requires a login to view.
View 1 Replies View RelatedI have several network cameras within my home. Some are Panasonic. How can I view the image without using their cgi. I just want to view the camera image within my security program. How can I do this?
View 1 Replies View RelatedI have an ISIS TFS1612 security camera system at my business. I'm looking to view it remotely. But, I can't seem to get it working. I have forwarded all ports that it uses. As well as set up a static external ip address. The modem I have is an Actiontec Q1000 which also acts like my router. There are other things connected to the modem.
View 5 Replies View RelatedI asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
How do i use dcs-932l with d-viewcam. I tryed to connect but d-viewcam does not recognize model.
View 1 Replies View RelatedI would like to start a new thread on possible enhancements/improvements on the new D-ViewCam v3.0.Allow Events (General Motion detection) to be visible in Playback timeline/period selection, similar to the way of Backup (and Remote Playback) timeline/period selection. Fixed in 3.01.Allow 30-second steps increments forward/ backward in playback. Current minimum is 1 minute.Allow jump to event during playback, from either log-viewer or inside playback (via extra button), similar to version 2.0xMention 64-bit compatibility in User- documentation/ datasheet (it is not there yet)Allow/implement multi-channel simulcast [remote] Playback (it is pre-wired) Allow/ implement multi-channel remote viewerBug: Fix Signal Lost event visibility in time/period selection (it does not show these events)Bug: Fix 64-bit hi-res (>1280x1024) "Resource" error. Fixed in 3.11.Bug: Fix Playback.exe crash when saving image/snapshot, while supplying wrong extension (reproducible by: Save as jpg, then supply name.asf, and it will die)Road_runner: Option to move app-window/screen to other monitor and/or resizeToppy: Support older model cameras (DCS-900/950)Toppy: Support multi-screen display (multiple windows)disaster: Option for a playback list similar to V2.03, select motion separately, instead of single stream.disaster: Allow for GUI to select cross-mignight period (can be done manually by setting start-date and -time)disaster: Elaborate more on Smart Guard in Docsdisaster: Allow for higher free space percentage threshold for overwriting old recordings disaster: Allow to program autopatrol to start and end on a scheduled timeBug: Use of < character in password causes deletion of ALL defined remote serversZippyDan: Remote Live Playback: playing video from more than one camera at the same remote site at the same time.
View 9 Replies View Relatedi have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies View RelatedHow to setup recording on dcs 932l?
View 1 Replies View RelatedI am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.
View 1 Replies View RelatedI have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies View RelatedI have just purchased 3 DCS-932L'S and installed 3.11 D-ViewCam software. I have done my best to configure the mainconsole correctly so that my cam's will record on motion based occurances on a weekly schedule of 24 hours a day everyday. I have a lot of evidence that the system is recording as when I have the console open that there is motion detected and there are 3 folders in my nas unit that has tons of .dat files in them. My problem comes in when using the playback system. When I select the search by date/time button and locate the folder that is for a the camera I am interested in playing video for the results never show up!
View 1 Replies View RelatedI have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies View RelatedI have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2. When I open the DviewCAM main console I have picture. When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet. [code]
View 5 Replies View RelatedHow to flash a DIR-601 Rev B1 with any of the custom firmwares out there? I've tried all of them this morning and haven't had any luck. I set the router to recovery mode and tried openwrt, dd-wrt, tomato, and gargoyle. I tried with chrome, firefox, ultra simple web browser, and ie 8. Every attempt resulted in "Upgrade Failed". I know Rev A1 is supported by DD-WRT, just sucks newegg sent me a B1. Looks like several other routers run similar hardware, so it's got to be doable.
View 5 Replies View RelatedWhen I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies View Relatedi have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies View RelatedTaking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies View RelatedI have (2) 942-L, and (1) 5222-L on one network. port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80. no matter if all 3 are connected to dViewCam, only two will work at a time. Disconnect any third, and they work fine. reconnect 3rd, and one disconnects intermittently. On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine. I know, I know, but I like DViewCam, because it's the only thing running the PC computer.
View 3 Replies View RelatedI just purchased two DCS-930L cameras. They are both installed and running fine over wireless. I can view them via a web browser, however, I cannot get D-ViewCam to work. I installed the latest version (3.1.1). As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457". I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work. I also have User Account Control (UAC) turned off.
View 7 Replies View Related
