D-Link DCS-942L :: How To View Camera For Outside Network

Jan 4, 2012

I have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.

View 5 Replies


ADVERTISEMENT

D-Link D-ViewCam :: Unable To Find Camera (942l) On Network

Apr 3, 2012

Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.

Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN

I'm able to view the camera on the browser. And on my phone.

View 1 Replies View Related

D-link Dcs Network Camera :: Netgear Cgd24n - 942l Just Won't Connect To Wifi Network

Sep 2, 2012

I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.

So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?

View 1 Replies View Related

D-Link DCS Network Camera :: DCS-942L / Ports To Open For Remote Viewing?

Mar 27, 2013

I have four DCS-942L cameras and a 2012 model Airport Express router.  I cannot view live video from outside the router  in any fashion other than mydlink.com's poor quality time-limited forwarded video.  Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers.  This works--I can access the camera settings that way, albeit with NO SSL support (dammit).  So, fundamentally, port forwarding works on this router.  The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router.  (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video.  When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit.  netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside.  In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports."  It gets stuck there and does not proceed.  On the LAN, using the local IP address, I can stream video just fine.

Any way to change this?What other ports do I need to open to make the video stream work?  I tried mapping ports 5556-5559 to one of my cameras, but that did not work.  Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP.  How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP.  From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work.  Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera.  Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP?  If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.

View 5 Replies View Related

D-Link DCS Network Camera :: 920 Can't View From Outside Firewall

Apr 19, 2012

I have a camera set up in my kitchen and it works and I can view it in our house, on other computers or my iphone.  But I can't view it from my work or anywhere outside our wireless range.It is a DCS-920.  I have opened port 80, and checked it with a port checker and it says its open.  I have bell as a provider with a 2 wire 2701hg-g modem.I read on here about someone else not having a gateway address or primary DNS.  I don't know what to put in there.  My camera address is 192.168.2.20.

View 4 Replies View Related

D-Link DCS Network Camera :: How To Setup 920 To View From Internet

Mar 12, 2011

I have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?

View 1 Replies View Related

D-Link DCS Network Camera :: DSC-2121 / View Images Without Login?

Nov 3, 2011

On my website I want visitors to be able to see the picture from my DSC-2121 using the example [URL] without having to enter user name and password. To begin the URL with "http://user:passwd......." no longer works in IE.

View 2 Replies View Related

D-Link DCS-942L :: Cannot Get Camera To Work On PC

Jan 4, 2013

I just purchased 2 cameras and have one set up.
Firmware V 1.12

Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config

View 8 Replies View Related

D-Link DCS-942L :: How To See Who Is Watching My Camera

Mar 27, 2013

Is there such a possibility in the firmware or through telnet?

View 3 Replies View Related

D-Link DCS-942L :: Camera Is Not Recording In SD Card

Dec 27, 2012

i bought wireless camera dcs942l everything works but my sd card 32 gb is not recording the camera is not recording in my sd card i formated sd card still not recording camera works good quality picture network working but not recording on my sd card and i can not record in my computer

View 5 Replies View Related

D-Link DCS-942L :: Getting FTP Option To Work With This Camera?

Jan 18, 2012

Has anybody gotten the FTP option to work with this camera?  And if so how did you set up the path to point to the ftp share.  The instructions say one thing but that one thing doesn't work.  FTP is setup locally on my NAS box which does work.  Or is this another one to add to the Firmware which list? 

View 4 Replies View Related

D-Link DCS-942L :: Can't Access Into Camera Interface With 192.168.1.100

May 12, 2013

Months ago i can enter in the camera interface by using 192.168.1.100  , its correct ip to enter in the cammera ?  Now i dont know what is happening i connect the ethernet cable correctly  from PC to the camera and i type in the browser : 192.168.1.100 but nothiung happen ?

View 4 Replies View Related

D-Link DCS-942L :: Unable To View Video?

Jul 15, 2012

My camera saves video as .avi files, but when I open them in Media Player, all I get is sound. The camera works fine, as I can view live video, but the saved files show nothing, just have sound.

View 4 Replies View Related

D-Link DCS-942L :: Access Camera Directly And RTSP?

Apr 6, 2012

I can access my DCS cameras directly using several iPhone apps such as IP Cam Viewer Pro. Is it possible to access the camera directly using a web browser (I have tried without success) e.g. do you need to use a specific port?Also, the DCS-942L has RTSP. I am not clear as to the difference between RTSP and HTTP streaming of video, any resource that clarifies with respect to D-Link cameras?

View 2 Replies View Related

D-Link DCS-942L :: Remove Card From Camera To Manage Recordings?

Mar 7, 2012

Is it necessary to remove the card from the camera to manage (view, edit, delete) the recordings?

View 2 Replies View Related

D-Link DCS-942L :: Camera Filled Sd Card And Stopped Recording

Apr 10, 2013

It didn't fill it up completely, it stopped at the 200 meg free mark, however I have cyclic checked (which btw is not mentioned anywhere in the manual).  I assumed this option would cycle by deleting the oldest file to continue recording.

View 1 Replies View Related

D-Link DCS-942L :: Software Locally Can't Find Camera But Mydlink Can

Mar 11, 2012

I installed my first IP camera.  Things seem to have went ok with the installation andd router.  I can view the video live from mydlink.com.I've tried the dlink software, but it can't find the camera so I can control recording options, ftp, etc. i've also tried 3rd party software that can't find my camera.I'm fairly internet savvy, but do not have access to my router admin atm. (cable company installed their own)   My home ip address is supposed to be dynamic.  I thought that would cause me problems viewing from mydlink.com, but it hasn't so far.

View 5 Replies View Related

D-Link DCS-942L :: Cisco EA2700 Can't See Camera Without Connection With UPNP?

Feb 11, 2013

In my Ipad (I have Dlink+), I can only see 1 minute of the Cameria 942L...the faq says that I need a conection witn Upnp.I have a Cisco EA2700 and I check the box of Upnp,,but I still cant see my camera from more than a minute,, then I have to reload.

View 2 Replies View Related

D-Link DCS-942L :: Cannot View Playback After Latest Firmware Upgrade

May 12, 2013

I have a DCS-942L.  Everything was working fine on my setup until I upgraded the firmware the other day. In the mydlink.com website when I logged in that day, it stated a firmware upgraded was needed.  So I clicked on upgrade, let it run its thing and then tried to view the playback and now the thumbnails are just black and when I click on one, it looks like it is loading but then shows the quicktime icon with a question mark over it.  I upgraded my Quicktime component and that didn't fix it either.  So I went into advanced settings, downloaded the new firmware upgrade from there by saving the zip file and uploading it via the advanced settings website, and still nothing.  I have another camera, same setup, that I have not upgraded firmware on yet and that playback is working fine.

View 1 Replies View Related

D-Link D-ViewCam :: DCS-2210 Using A Custom IP-camera View Possible?

Oct 31, 2012

Is it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...

View 1 Replies View Related

D-Link DCS-930L :: D-View Program Does Not Show Camera

Feb 15, 2013

If i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software

View 1 Replies View Related

D-Link DCS-930L :: View Camera Stream Without Username And Password?

Jan 24, 2012

way for one to view a camera stream without a username and pass? We are upgrading from older dlink cameras, I don't have the model handy. Previously we could just use the applet and it would display, I copied the applet from the new one but it requires a login to view.

View 1 Replies View Related

View Network Camera Images Without CGI?

Dec 30, 2012

I have several network cameras within my home. Some are Panasonic. How can I view the image without using their cgi. I just want to view the camera image within my security program. How can I do this?

View 1 Replies View Related

D-Link DCS Network Camera :: 910 - Way To Access A Camera Without Using Dyndns?

May 11, 2012

I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question.  The smartphone works fine locally with wifi and has a browser available.

The real question I have is what is the easiest way to access any camera via a browser from a remote location.  Years ago tech friend assisted me access my DCS-910 using dyndns.org.  It was free and worked great.  I guess it went away when they started charging for a basic account.

Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name?  I would just like to see at least one of my cameras in a browser off-site.  If I have to pay $20/year for dyndns I can but I would prefer not to if possible.

View 2 Replies View Related

D-Link DCS-942L :: 942L - Gaps In Continuous Recording

Mar 10, 2012

I have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.

Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.

View 4 Replies View Related

D-Link DCS-942L :: Can't Run 942L Without Power Cord

Aug 5, 2012

I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?

View 5 Replies View Related

View Security Camera's Remotely?

Jan 26, 2011

I have an ISIS TFS1612 security camera system at my business. I'm looking to view it remotely. But, I can't seem to get it working. I have forwarded all ports that it uses. As well as set up a static external ip address. The modem I have is an Actiontec Q1000 which also acts like my router. There are other things connected to the modem.

View 5 Replies View Related

D-Link DCS-942L :: Network Attached Storage

Feb 11, 2013

Anyone using it to save videos from their cams? Are you using Synology NAS? Am interested and want to hear from people qualified to discuss NAS. Qualified means you are currently using NAS or have thoroughly researched it to the point you have made your purchase decision for the most part.

View 6 Replies View Related

D-Link DCS-942L :: Can't Get To Work On Wireless Network

Jun 15, 2012

i have both 932L and 942L and the 932L was plug N Play and no problem setting up with my WiFi. But i can't get the 942L to work. Works fine with the Ethernet cable but not wireless.

Come on ... I can't be the only one with this problem? I have two 942L cameras and neither one of them can I get connected to the wireless network.

View 3 Replies View Related

D-Link DCS-942L :: Set Network Drive As Storage Folder?

Jan 24, 2013

I would like to turn on continuous video recording and have it sent to a drive on the same network as the camera without going through a computer.  Is there a way to setup the "storage folder" as a network drive?  For example my network drive is accessed at \192.168.0.1volume1 through a web browser.

View 1 Replies View Related

D-Link DCS-942L :: Does Not Work With Android MYDlink Application On 3G Network

Mar 13, 2013

I tried several times to see the DCS 942L camera picture on my Samsung Advance S smartphone on UMTS 3G net but also setting the video parameters profiles at minimum (64 Kbit/s) it does not work. The MyDlink lite version is the 2.6.1. release. Locally ,using Wi-Fi it works well of course.

View 5 Replies View Related

D-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?

Apr 12, 2013

I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80   ....   85. The screen has only the option for 1  video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras  at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?

View 5 Replies View Related

D-Link DCS Network Camera :: 2121 - When Plugged In Without Network Cable / Status Led Remains Red

Mar 26, 2011

I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved