I tried several times to see the DCS 942L camera picture on my Samsung Advance S smartphone on UMTS 3G net but also setting the video parameters profiles at minimum (64 Kbit/s) it does not work. The MyDlink lite version is the 2.6.1. release. Locally ,using Wi-Fi it works well of course.
View 5 Replies
i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies View RelatedI installed my first IP camera. Things seem to have went ok with the installation andd router. I can view the video live from mydlink.com.I've tried the dlink software, but it can't find the camera so I can control recording options, ftp, etc. i've also tried 3rd party software that can't find my camera.I'm fairly internet savvy, but do not have access to my router admin atm. (cable company installed their own) My home ip address is supposed to be dynamic. I thought that would cause me problems viewing from mydlink.com, but it hasn't so far.
View 5 Replies View RelatedI have a DCS-930L and when I was viewing from mydlink.com, it works fine. However, it is interfering with my personal web server which is also hosting on Port 80. When I change the port on DCS-930L configuration page to other port like 8080, I can't view it on mydlink.com, but if I view it locally, it works which defeats the whole purpose.
View 2 Replies View Relatedi have both 932L and 942L and the 932L was plug N Play and no problem setting up with my WiFi. But i can't get the 942L to work. Works fine with the Ethernet cable but not wireless.
Come on ... I can't be the only one with this problem? I have two 942L cameras and neither one of them can I get connected to the wireless network.
The company has a glitch that they are not sure if they will fix so you can't record with mac. I am unable to return my cameras to staples and Im out the money for the memory cards I opened. It says you can record with MAC clearly on the box!!!! Bad business practice for STAPLES and DLINK.
View 3 Replies View RelatedI just purchased 2 cameras and have one set up.
Firmware V 1.12
Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config
I managed to make this Android application that can show my DB's records and works just as I wanted.The code uses a PHP script to connect with a local mySql database and a JSON parser is also used.Of course, the application works perfectly in my internet connexion since I forwarded the port 80 to my computer by loging into my router.URL,Now, I'd like to make it more global? I'd like for example to use this app in my university's network.But I can't access the university's router.
View 5 Replies View RelatedHas anybody gotten the FTP option to work with this camera? And if so how did you set up the path to point to the ftp share. The instructions say one thing but that one thing doesn't work. FTP is setup locally on my NAS box which does work. Or is this another one to add to the Firmware which list?
View 4 Replies View RelatedI have a 932L already and wanted to add another camera, so I purchased the 942L in the US. I live in Canada. The 932 works perfectly, emailing me without any problem. Set up was a breeze. This new camera appears to be a problem. I cannot get this turkey to email. I am very computer literate, and I have been working on this thing for ages now without success. I would like to return this thing and get another 932, but hard to do from here. I see from these forums that nobody else appears to have gotten it to work either. By the way, I upgraded it to the latest version firmware, no change. How to email images using the motion detection?
View 2 Replies View RelatedI have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.
Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.
I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?
View 5 Replies View RelatedI seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
I have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.
View 5 Replies View RelatedAnyone using it to save videos from their cams? Are you using Synology NAS? Am interested and want to hear from people qualified to discuss NAS. Qualified means you are currently using NAS or have thoroughly researched it to the point you have made your purchase decision for the most part.
View 6 Replies View RelatedI'm getting an error during setup that says "You are unable to connect to the mydlink web site, and your camera could not be added to your mydlink account."
View 14 Replies View RelatedIs there a way to view live video without using the Mydlink app on an iPad?
View 3 Replies View RelatedI would like to turn on continuous video recording and have it sent to a drive on the same network as the camera without going through a computer. Is there a way to setup the "storage folder" as a network drive? For example my network drive is accessed at \192.168.0.1volume1 through a web browser.
View 1 Replies View RelatedThe DCS-930L provides no date & time on video stream at mydlink, but does display those when accessing on the LAN. Is there a way to force the date/time tag to show over the web? Otherwise, remote recording might not know when an event happened?
View 1 Replies View RelatedJust got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
I have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
I buy new Cisco Modem X2000.I face several problem:
1- When i enter to any website for example (Facebook), When i check remember me, It's not working if i exit and enter again ( No Cookies).
2- I can't download application in iPhone and Android phones.
I recently purchased a Cisco RV180W VPN router and would like to enable the VPN (specifically IPSec) capabilities so that I can connect via my Android 4.0 (Samsung Galaxy S3) phone. I need step by step instructions (I'm quite unfamiliar with Cisco routers) to configure both the router and my Android phone to do this. I've actually been able to configure the RV180W to work with PPTP (and connect via my phone with PPTP), but would prefer to use IPSec.
View 0 Replies View RelatedI successfully install 4 WAP321 in my company. Everything works... except captive portal on IOS, android and firefox. moreover, I notice that firefox (and android, not sure for IOS...) works ONLY if I copy/paste internet local address from IE to FIREFOX [URL] ...
To my mind, the problem is INSIDE WAP321 OS...
I openend a CISCO's case, and they allready know this problem. When I started to explain my issue, He said "oh yeah the pink page?".
I'm trying to set up my DIR-655 so I can use VPN to access my work PC. How can I set this up?
View 2 Replies View RelatedI have 1.00 build 0522 and searching the support website I see no link. But reading here I see there is a later version.
View 1 Replies View Relatediphone and android app but no blackberry.
View 3 Replies View RelatedIs there such a possibility in the firmware or through telnet?
View 3 Replies View RelatedAs DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.
[url]....
I just bought new 942L (HW Rev3, 1.12 FW) and the only profile which is used to stream to iPhone or Web browser in mydlink is profile 3 which is limited to JPEG. Is there some way how to change the profile to be used for streams or is there a way how to make to profile 3 something else then JPEG?
View 1 Replies View RelatedI have 3 DCS cameras on my network all setup WiFi
2 are DCS-932L and 1 DCS-942L
The DCS942 (which is right near but facing the other direction) is about 2 meters away from one of the 932's but the 942 keeps going offline - it comes back on and off probably 4-5 time during a 24hr period.
This is most frustrating - it would look like Wifi signal strength could be the issue but the other 932 right near it doesn't have this issue?
I initially set it up for static IP, which was a mistake for reasons I probably don't need to go into here. Having recognized my mistake, I've been trying to hard reset it so I can convince it to acquire its IP address by DHCP, but each time I reset it and return to the "First, select your camera" screen in the setup wizard, I'm faced with a single choice: the device as I first set it up for static IP. I don't seem to be able to convince it to give up that erroneous static IP address.I have read the FAQ section on hard reset. I've held down the reset button for a lot longer than 6 seconds while the cam was connected to power and ethernet, and I've watched it go through the sequence of flashing blue reset and WPS lights until it settles down, but this doesn't change the situation, evidently.
View 7 Replies View RelatedMy DCS-942L is almost always in night mode with IR on resulting in a B/W picture. Only when the light is very bright it changes to day mode. How to adjust the day/night threshold?
View 11 Replies View Related
