Using Android Application On A Different Network
May 9, 2012
I managed to make this Android application that can show my DB's records and works just as I wanted.The code uses a PHP script to connect with a local mySql database and a JSON parser is also used.Of course, the application works perfectly in my internet connexion since I forwarded the port 80 to my computer by loging into my router.URL,Now, I'd like to make it more global? I'd like for example to use this app in my university's network.But I can't access the university's router.
View 5 Replies
ADVERTISEMENT
Mar 13, 2013
I tried several times to see the DCS 942L camera picture on my Samsung Advance S smartphone on UMTS 3G net but also setting the video parameters profiles at minimum (64 Kbit/s) it does not work. The MyDlink lite version is the 2.6.1. release. Locally ,using Wi-Fi it works well of course.
View 5 Replies
View Related
Nov 13, 2012
I buy new Cisco Modem X2000.I face several problem:
1- When i enter to any website for example (Facebook), When i check remember me, It's not working if i exit and enter again ( No Cookies).
2- I can't download application in iPhone and Android phones.
View 5 Replies
View Related
Sep 22, 2011
I just got the motorola droid 3, my first android device. I'm trying to figure out how to get my device to connect to my network as it won't obtain the IP address.I have a Motorola Surfboard SBV5120 Modem and a Microsoft MN-700 router. I just switched from the Palm Pre Plus which connected perfectly to this network, the network is unsecured and has 2 pc's and a 360 running on it. I was able to connect to my friend's wireless network fine at his house.
View 9 Replies
View Related
Apr 25, 2012
I am trying to connect my android to my home network how do i go about that?
View 1 Replies
View Related
May 24, 2011
I recently purchased a android tablet and want to access my wireless connection through my network. When the tablet recognizes my network but when I enter my router password it wont accept it. I have reset the router back to default and reset a new password and it still will not accept it.
View 4 Replies
View Related
May 27, 2013
Recently, I have configured a small Wireless Network with Cisco 2500 WLC (25 AP License) running version 7.3.101.0 ,Total 15 APs were installed and associated with the Controller successfully.I have configured WLAN with WPA2-PSK.
I came across a strage issue, where all Android devices can't access Internet via Wireless.When I checked the Controller log, the Android devices (Phones, Tablets) are successfully authenticated and associated to the Wireless Network (They got the IP Address from the DHCP Server configured on the Switch) but they can't access internet.
There is no issue with Apple devices (IPhones, IPADs) and Wireless Laptops. Even the Apple devices and laptops getting IP Assigned from the Same DHCP pool configured on the Switch.
Any issue connecting just Android devices? All other devices connect fine.
Is there any limitation/configuration on the WLC which restricts the Internet Access only to the Android devices?
View 6 Replies
View Related
Dec 26, 2012
Every device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes
!
! Last configuration change at 10:18:26 MST Sun Dec 23 2012
! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
[Code].....
View 15 Replies
View Related
Jan 30, 2012
Is it possible to create an application that allows you to add a new machine to the network and how?
View 2 Replies
View Related
Dec 3, 2012
Everytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
View 2 Replies
View Related
Jun 13, 2011
We have a legacy client/server application, an OCR system. The server runs on Windows 2003 R2. We have client machines running happily on Windows XP.We have for a while had problems with getting the clients to run on Windows 7. Some machines wouldn't work, others worked intermittently, one worked consistently. By a process of elimination I discovered that the one working consitently was on a desk where we had put a small 8 port 3Com gigabit switch on the desk to give us more network ports. If I move this switch to any other desk to one of the non-working clients and connect them using the same uplink but going through the desktop switch they start working.The XP clients work fine using any of the network switches. None of the 100+ devices on our network (desktops, laptops, VoIP phones, printers etc) are showing any other signs of network issues, only this OCR application. The application was last updated in 2004, so was not designed for Vista or 7, essentially the vendor is no longer updating it, but say that as far as they are aware it works with Windows 7.why adding a 3Com 3c1670800B switch between the client and the rest of the network should make the application work with Windows 7. Whilst I have a workaround for the problem I'm uneasy that I don't understand the root cause, and if I was to press ahead and move the client machines to Win7, the whole system depends on a single piece of kit that's now discontinued and I only have one of. It all seems pretty counter-intuitive to me that an application should be sensitive to low level network hardware.
View 7 Replies
View Related
Feb 11, 2011
How do you access an application that is in the server? Like what extra steps you gotta make? Are they software related or do I have to do some configuration on the router or switch? Heres a little example:
Assume you have a group of computer connecter to a switch, this switch is connected to a router which has the connection to your ISP. On the router, you also have connected a server farm for your network and all the apps are stored there, say MS Word, Excel and such.Now, you have your network running, every ping comes out successful, so you know you did that part right, so the next part is to get the host use the MS Word or any other app in that server. How do you do that? Is there something that need to be configured on router/switch or is it with a software on your host? If its a software, whats the name of it and how you make it work?
View 2 Replies
View Related
May 30, 2012
How can i to prevent the demonstration of a software in corporate network?
View 2 Replies
View Related
Nov 27, 2012
Can the Nat Pool be on a different network that the load balanced vip? My current design uses nat pool on the same network, but the archatect wants the NATs on seperate VLAN.I will be developing on ACE MOD20, but the final configuration will be on 4710.
View 3 Replies
View Related
Feb 20, 2013
How can i share application so that other users can directly use application in network without installing in his/her system. I have ubuntu server 12.0.1 installed and users are using windows 7. I will install any other os as server if necessary.
View 5 Replies
View Related
Dec 20, 2011
i need to be able to find out what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.
View 7 Replies
View Related
Feb 23, 2011
i'm getting "general network error" while accessing application from server..
client machine: Windows 7
server machine: Windows 2008 server
Switch : 24 port unmanaged D-Link switch ..
network cable: CAT-5 cable.
View 1 Replies
View Related
May 24, 2011
I have CSS CSS11501 which is working fine in single arm deployment. Now I want to have redudency so that in case the switch 1 where CSS is currenlty connected is down.I can reach the CSS through the second switch 2.Both the switch are trunk with each other and CSS has one port connected with Switch 2.
View 2 Replies
View Related
May 21, 2012
We have several pairs of CSS11501 and 11503 in our network.This issue affects only one pair of CSS11503 in one of our data centres. [code] We use vrrp in one-armed mode for load balancing and they units have performed great for a number of years. We're obviously going to be migrating to ACE ... but not just yet.We have started to experience a problem with replicating the configurations between two CSS11503 in a pair.When running the commit-VipRedundConfig, it starts off happily enough, though slowly.Ending with "working" and the spinning cursor, even after 1 hour the script hasn't completed.We noted on the backup CSS that the APP configuration disappears during the process and I can't remember if this is normal behaviour.
Re-adding the app session configuration seems to interrupt the process, and when checking the configuration on the backup CSS approximately half of it is missing. Everything after the first owner is gone.
1. Configuration is too large, or just large enough to make the commit script take too long for realistic service.
2. Software bug?
3. Combination of both.
4. From now on manually add config to both CSS's and maintain it by process management.
View 5 Replies
View Related
Jan 15, 2011
In OS X 10.6.5, the following dialogue popped up:.Do you want the application "master" to accept incoming network connections?
View 3 Replies
View Related
Sep 24, 2012
I'm looking for some documentation I can share with a customer to explain why I can't configure them a back-up sticky server farm when we're not terminating SSL on the the ACE (we pass SSL from the client through to the rservers, sticking the client to the rserver by source IP address). I've not been able to find anything that addresses this particular scenario in my googling so far. I remember discussing this in my training class with the instructor, but I can't find any reference to it. Have any of you run into this and have a link they can share?
View 7 Replies
View Related
Mar 27, 2013
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies
View Related
Feb 8, 2013
i have issue for Remote App to connect to the Apple TV using the Wireless network setup in my 180W.My wired Mac is able to connect to wireless connected Apple TV but my i phone (4, 4S and i Pad) are not able to connect to apple TV.
Do I have to enable some setting for this to work. It used to work in my very old Buffalo router with tomato firmware.
If I connect the Apple TV to wired network it works fine. Instantly it shows up in i Phone Remote app, but not if its on wireless network.
View 1 Replies
View Related
Feb 15, 2013
I have a standard ADSL modem which connects to the internet. On the inside I have a few computers within my LAN.when the modem receives an incoming request from the internet for a connection to one of my LAN computers e.g. a Skype incoming call, how does the modem know which port to forward that traffic to on my internal LAN? i.e. how does the modem know which of my computers is running the skype application that will answer the incoming call? I know port forwarding normally handles this sort of thing, but in my case, I am not using any configured port forwarding rules so how does the modem know where to forward skype traffic?
View 2 Replies
View Related
Jan 21, 2013
I work at a hospital and one of our department uses specialized software created by Varian Medical Systems. It has been brought to my attention that one of those applications has trouble opening during the day. I had the users demonstrate the issue and from what they explained to they are supposed to be able to open the application, log in, and be presented with a list of radiology images to choose from. Unfortunately, during the day this fails often and they have to try 3 or 4 times before it actually works. It behaves differently after 4 pm, and seems to work after the 1st or 2nd time at that time of the day. According to what I've been told this has been an issue as long as they can remember.
Varian has told me that they have done a number of things on their side to rule out their software and they think it is a network issue. We used Solar winds Engineer's Tool set (specifically the Network Performance Monitor) to monitor their switch and it is reporting no errors and the utilization graphs show that the ports involved have very little utilization. The most heavily utilized port is hovering between 10 and 5 person (Fa0/40). I've included a network diagram, but basically we have 1 10/100 Cisco 3350 switch (c3550-ipservices-mz.122-25.SEB4.bin), 4 clients, and 2 servers involved. They all are connected to the same switch at A-Full/A-100mbps. Although the Network Performance Monitor doesn't show any errors or over utilizaton of the ports in the the CLI I do see 35 output buffer failures and 35 under runs on the port connected to one of the servers (Fa0/40). They were a little higher and I cleared them about two weeks ago and then rebooted the switch, because I found that it could alleviate these types of errors.
They say the software use ports 5000, 55000, 55010, and 55020. We tried a packet capture, but I didn't have enough experience/knowledge to get anything useful out of it. I also checked the event logs on the clients and servers and nothing there indicates a issue in the software. They want us to replace the switch with a gigabit switch, but we have a REALLY limited budget and I would rather not if it isn't necessary. What I could try in order to rule out the network?
View 4 Replies
View Related
Apr 2, 2013
Unfortunately, despite my best efforts to find a better alternative, where I live my only option for unlimited internet with any speed whatsoever is to tether my DROID DNA phone to my computer using the app PdaNet. I've been doing this for over a year now without any problems.I have an unlimited data plan through Verizon and although I only have 3G at my house, it is still far better than anything else I've found.
Recently I started playing the online game World of Warcraft. Obviously the speed isn't ideal, but it worked perfectly fine for about 3 weeks. One night the game started to get really slow and after a minute or two would freeze up entirely. When this happened, I would have an error message on my phone at the PdaNet screen that read "Communication with client has been broken." Despite restarting things, this continued to happen. I assumed that it was because the weather was bad outside, but the problem didn't go away the next day. When I noticed that my internet speed when browsing the web had slowed down as well I figured that although I supposedly have unlimited data, that Verizon must have slowed me down for crossing over a certain download barrier. I've heard that they do this.
So this went on for the next week until the first of the month when my data was reset through Verizon. Well I'm still having the same issue when trying to play the game. It will work alright for anywhere from 30 seconds to 10 minutes, and then all of a sudden start to get slower and slower until it freezes completely and I have the "Communication with client has been broken" error screen on my phone. I'm not sure if my internet speed in general is back to normal or not because I haven't spent enough time online to know for sure, but at the moment it seems to be.
View 3 Replies
View Related
Jul 24, 2012
i've got remote desktop and it is amazingle useful.know of an app that lets me link into shared devices on my windows 7 p from my phone? I want to be able to access my hdd without having to be using remote desktop.
View 5 Replies
View Related
Feb 7, 2013
For some weeks I have been trying to pair my Samsung Galaxy S2 with my Lenovo Thankpad SL500. The consistent message is "Unable to pair with [laptop]. Incorrect PIN or PASSWORD.
Well which is? PIN? or PASSWORD? - or does the system not know, so it's taking a guess? If it doesn't know, how can I possibly know?
Having read many articles about his on the www, I am still none the wiser as to what is causing this. What's wrong with the PIN or PASSWORD - is it too hot, or too cold? Wrong font face, colour or size? Wrong latitiude, longitude or elevation? Wrong time of day or month? Are the auspices in general not favourable? Am I facing in the wrong direction as I type? Have I chosen the wrong weight/color of paper for my printer? Is my body odor unacceptable? Is the length of grass in my lawn not quite right? Oh, the number of options is so large - where does one start?
Oh, and before I forget - assuming I can find what constitutes a correct PIN or PASSWORD, where does one set it? btw pairing this phone with the media player in my 10 year old car works immediately and flawlessly!
View 10 Replies
View Related
Feb 9, 2013
I have a new FVS318G with latest FW, trying to configure FVS318 as VPN server, which to allow VPN client such as Android and Iphone be able to connect to FVS318 from the cloud and establish VPN tunnel.(url...), Netgear si using the term so unusual, it calls VPN Gateway and VPN client.Don't know why don't they call VPN server and VPN client.Anyway I did call Netgear Tech-supp.According to the Tech, there is not require the username and password for client to connect to Netgear VPN gateway.I am totally lost. I understand that FVS318 does not support PPTP and L2TP so no luck for Windows, but Android and Iphone have support to IPSec VPN. how to config FVS318 VPN, with username and password (for 2-3 different users username /password credential), VPN policy and Firewall polices if needed for VPN to work.
View 1 Replies
View Related
Dec 23, 2012
I just got a maylong 4.0 android tablet. The instuctions are vague on how to set up an internet connection.
View 2 Replies
View Related
Jun 8, 2012
I received my upgrade yday from shop. I'm using galaxy 11s but have now galaxy 111 x my 11s is still connected to fone as hubby got it but I can't get wifi on new fone x iv sky broadband. does it take 24 hrs or what's wrong.
View 1 Replies
View Related
May 25, 2012
This is probably where I should have started my search. During the last 2 days I have taught myself numerous things to try and figure out this problem. I want to run 2x Client on my android to remote into my desktop. I have a Verizon fios actiontec router ver. I and running win 7 prof.. I have been able to easily set up the 2x client and remote into my desktop while on my home wifi but trying to use 3g/4g service has yielded nothing but heartache and stress.
View 4 Replies
View Related
Dec 30, 2012
I cannot connect to home WiFi while all other devices connected. Getthing "Authentication Error"
View 2 Replies
View Related
