Cisco :: Samsung Android Phones Cannot Connect To Aironet 1040 Network
Dec 26, 2012
Every device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes
!
! Last configuration change at 10:18:26 MST Sun Dec 23 2012
! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
[Code].....
View 15 Replies
ADVERTISEMENT
Dec 16, 2012
We have a Cisco ASA 5520 and use the Cisco VPN Client a lot, but I can't seem to to get Android phones to connect (Ice Cream Sandwich OS), it seems to want use Anyconnect
View 2 Replies
View Related
Nov 23, 2012
how i can set up access point aironet 1040 cisco?
View 2 Replies
View Related
Dec 18, 2012
I Want To Connect My Android Phone To My PC For Internet.
View 1 Replies
View Related
Sep 9, 2011
I have a samsung galxy 5 phone.. with ANDROID 2.1 installed in it.. I wan2 access internet thru wi-fi on my mobile. I have got myself a wireless router at home. the wi-fi settings page of my phone says that i am connected to the network i wanna connect to... but when i try 2 access any website thru d browser , it displays page not found..
View 4 Replies
View Related
Jun 10, 2012
Android users can connect to our hospital guest wireless but will not have connectivity. Our wireless infrastructure is WISM based with 2 controllers on 6509 platform. We have a mixed environment of 1231, 1252 & 3502 series APs.
Had issue connecting just Android devices? All other devices connect fine.
View 5 Replies
View Related
Jan 8, 2013
everyone can connect to the 1040 ap except my laptop and another one. for some reason it stopped showing , it was working fine and out of the blue nothing.
View 2 Replies
View Related
Nov 15, 2012
I have been racking my brain for a while and cannot figure out why I am not getting 144Mbps out of my Aironet 1040. I was reading a previous thread ([URL]) and set it up exactly like it said. I have set the encryption to Cipher AES CCMP and set the SSID to open authentication. I also set the SSID's key management to enable WPA (WPAv2).
I was reading that WMM has to be set. I have 3 options: Disabled, Legacy, and dot11d. If i chose dot11d I have to put in a coutry code. Problem is there are no options in the country code pull down. I cannot even manually type it in.
Another problem is that cell phones cannot connect. It keeps saying authentication fails in the log.
View 9 Replies
View Related
Sep 24, 2011
I have setup a Cisco Aironet 1040 to connect to our Radius server which I have also configured.
I can successfully connect up any Iphone or Ipad but I cannot get any laptop to connect.
I have attached the logs showing the Iphone Successfully logging in and the Laptop Failing. Every single failure in the Event log for NPS comes up with
Network Policy Server denied access to a user. Contact the Network Policy Server administrator for more information.
User:
Security ID: NULL SID
Account Name: scottd
Account Domain: AMSLAN
[Code].....
View 12 Replies
View Related
May 24, 2012
I am attempting to configure two Aironet 1040 series wireless access points for the first time and am having some difficulty. This office does not have a RADIUS server so I would like to set them up to use WPA2 with a pre-shared key. However just how this is accomplished is not immediately apparent. I have attempted using both the command line interface and the web interface, but I get errors in both places. It doesn't seem like it is all that difficult, we're just talking about a few lines in the configuration file.
This is what I have so far:
Current configuration : 1684 bytes
!
version 12.4
no service pad
[Code].....
View 1 Replies
View Related
Jan 1, 2013
i have ~ 25 employees which are connected to the AP . I have a 2mb dl and 2mb ul microwave lease line.The AP disconnects ever couple of hours for a minute?
View 3 Replies
View Related
Oct 27, 2011
I am trying to configure Aironet 1040 access point. After systems get connect they immediately get disconnected. The error observed on the device is as below
%DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 000e.83c8.c88a Reason: Disassociated because sending station is leaving (or has left) BSS
and the ssid is not getting broadcasted. kindly let me what could be the cause.
[code]....
View 3 Replies
View Related
Mar 11, 2013
I am trying to create a welcome screen for people who join the guest network on my aironet 1040.Webpage pass-through is really what I want but I know that doesn't work on a 1040.What does: IP redirect, Conditional Web redirect or Splashpage redirect?
View 1 Replies
View Related
May 22, 2012
We are currently using several AP's in our organization. And in this one AP i want to give a user the power to change the password of the wireless network to prevent miss use. I was wondering if it was possible to create an account who only has the privilege to change the WPA key?? I want to prevent that he will accidently change other settings.
View 5 Replies
View Related
Dec 26, 2012
we have several AP1040 in the office, but the latter is a Dual Band 2.4 GHz and 5 GHz. And we have problems with all workstations MAC OS X gets a lot of disconnections during the day, the strangest thing is that the OS X community is aware of the problem, and their only recommendation is to buy the external Aironport has better hardware.
View 3 Replies
View Related
May 21, 2012
I have a Cisco aironet 1040.
On my Accespoint i have 2 vlans: 1 for my wifi phones and 1 for my network.Wifi Lan has the SSID LAN with WPA enterprise authentication to a radius server(ms server 2008).Wifi Phone has SSID PHONE and vlan 50 with local radius authentication.This Works all fine, Except when i enable AP for my wifi phones. When AP is enabled the authentication for my lan doesn’t go to my server but local.How do I configure my accesspoints so that the cisco phones use the local radius server with AP and my windows computers connect using the ms radius server?
View 16 Replies
View Related
Mar 13, 2013
I'm working on setting up an Aironet 1040 Wireless Access Point for my company. It's my first time setting up something like this, and I've run into a bit of trouble.
I created my first SSID easily enough, following the manual and guides online. I set up VLAN 1 as my native VLAN and linked it to my SSID with the encryption and security that I was told to use and it works great. However, my boss asked me to set up a second connection as well for guests at the office, and this is where my trouble starts.
I created VLAN 2, and then another SSID which I linked here. I set up encryption and security the same way, and I can see the network when I open up my network and sharing manager. I can connect to the network as well, but I either get a spinning blue icon where my signal strength indicator is or a few bars with a yellow caution sign, and Windows says 'Identifying...'. I've compared the two SSIDs using the console and the GUI and I can't seem to spot any obvious differences between them.
View 4 Replies
View Related
Jun 25, 2012
I can't figure out how to get the config right for the 802.11n channel to work.
View 4 Replies
View Related
Aug 19, 2011
I have an issue with a brand new E4200 router. My E4200 can connect no issue with the following devices: Ipad, AppleTV, Dell Laptop, Ibm Laptop. It is also wired connected to my home PC. Internet works fine and file sharing/network works good for all the above devices.
The problem is that My wife and I's Phone can not detect the wifi network and can not connect to it. The SSID broadcast is enabled on both frequencies (2.4 and 5). I have try configuring the network manually on both the Android phones..it does not work.. it records the data but keep sayng the network is out of range (although I'm right next to the router). I hva eplayed with various channels on both frequecies and played also with the MTU size.One of the Android phone is Garmin the other Acer Liquid...different brand running both Android 2.2...
Firmware on E4200 is 1.0.02
All settings reset to Auto/MIxed for now.
WPA2 is enable with security key
SSID is enabled on both frequency
no MAC address filtering is setup
Both my phones can detect other networks and can connect fine to friends and family networks...So I suspect a compatibility problem between router an Android..I have contacted Linksys support twice with no avail. I have contacted both Acer and Garmin...they refer me to linksys
View 1 Replies
View Related
Mar 12, 2013
I got f9k1001v3 (n150) router, My problem is that I can't upload photos from my xperia p wirelessly. I tried to other connections (wifi) even on 3G and I can upload on instagram or fb.
View 3 Replies
View Related
Feb 19, 2013
looking for an info if Samsung SGH-1747M device running Android version 4.1.1 supported on Cisco WLC 7.4.100.0 Basically the Samsung device cannot join our test wifi (ipads and ihones are OK).
View 3 Replies
View Related
Mar 2, 2013
i have no access to my laptop keyboard, it crashed but i still need to use router for my roku and nintendo wii, however my isp has a captive portal.
View 1 Replies
View Related
Mar 25, 2013
I am having an issue with my Android Tablet running 4.1 (Jelly Bean). It is able to the SSID, but when I try to connect - it stays connecting and then says saved, and never connects, as it does not pick up an IP address. I updated the firmware on the Aironet 1140 due to my Windows 8 pc's not connecting as well, it solved my Windows 8 problem, just not my Android Tablet problem. My Ipads do work. Just any android device I connect.
View 1 Replies
View Related
Jan 24, 2013
I have a Samsung galaxy tab 10.1 and I cant connect to my wifi network. Months ago I was able to connect to it but since I changed the router settings I cant, and now it just says it's out of range. My laptop is still able to connect but the tablet doesn't.
View 2 Replies
View Related
Sep 29, 2012
I am trying to connect my Samsung TV to the internet and keep getting a message that says NEtwork setup complete, but cannot connect to the internet. I am wondering, I have 2 network connections, a secure one and unsecure. I don't have the information/password for the secure connection anymore, so I am trying to set my TV up with the unsecure network.
View 1 Replies
View Related
Feb 22, 2013
I am unable to connect to my home network over VPN from my Samsung Galaxy S3 phone. I have a Netgear WGR614v01 wireless router. This router has my desktop computer and windows 2012 server plugged into it. The server is a domain controller that has the following roles installed: DHCP, DNS, ADDS, IIS, and Remote Access. My Windows 7 Professional desktop is joined to the domain controller. The wireless router serves my netbook, smartphones, and ipods. They do not authenticate with the DC but do get a DHCP ip address from the server.I have my Samsung Galaxy S3 phone that I'd like to be able to use to VPN into my network. Here is what I have done;Disabled the DHCP service on the router. Setup port forwarding to forward PPTP to my server's static IP address on port 1723.I created a user on my DC for this purpose and enabled the account for network dialup service.I created a DHCP Relay Agent in the Remote Access MMC.I opened up the Remote Access app on the server's firewall.On my phone I setup a 'New VPN Connection...' I use the username/password of the user I created for this purpose. I put in my ip address that I have from my ISP.
View 2 Replies
View Related
Jan 4, 2012
I have a CUCM BE environment with a number of remote users with 8961 phones connecting to an ASA 5501 via AnyConnect. The phones register fine and can make inbound/outbound calls as well as four digit dialing to other users at the corporate site.
The problem is when a remote user tries to four digit dial another remote phone. The called phone will ring but there is dead air once answered and then the line goes dead.
This sounds like a routing issue to me. How to get AnyConnect clients to be able to reach each other?
View 3 Replies
View Related
Nov 4, 2012
how to connect wifi on mobile phone? how it works? my handset is LG T310i having wifi facility
View 1 Replies
View Related
Oct 20, 2011
I have pretty much the EXACT same issue. Revo 3700, Sky Unlimited Broadband, and a bunch of laptops and phones that can connect to the internet anywhere in the house without a probleI had the Revo connect all day last Friday (for the first time), prior to that it had connected a hand full of times, but only a very slow connection. For the last 4 days it hasn't connected at all, but says the signal strenth is 4 or 5 bars. I'm typing this from right next to the Revo on my laptop without any issue.
View 4 Replies
View Related
Jan 23, 2012
I'm trying to connect an android tablet (asus transformer) to my ASA5510 ver 8.4(2)I successfully configured to have "PHASE 2 COMPLETED"
But my droid give the message "user or password incorrect" and vpn isn't established.I use local AAA authentification.On the debug, I don't see anything or can't find the appropriate debug. [code]
View 8 Replies
View Related
Apr 16, 2013
I have signed up with Axvoice for cheap voip calls. My problem is I am trying to use three phone sets with the same adapter (grandsteam HT 286). In accordance with Axvoice's live support instructions, I have plugged the main phone jack of my house into that adapter. I am getting crystal clear voice quality in one phone set. That obviously indicates, there is no problem with the service. However, on two phone sets, voice is not clear and I am having noise and sudden call breaks. I have checked all the ports but could not find anything. I am jobless right now.
View 2 Replies
View Related
Oct 13, 2011
We have customer with implementation ACS5.2 in Windows environment. Now they want to implement IP phones in the network.
View 0 Replies
View Related
Dec 23, 2012
I just got a maylong 4.0 android tablet. The instuctions are vague on how to set up an internet connection.
View 2 Replies
View Related
