Samsung Galaxy 5 - Connect To Internet On Android Phone Using Wifi?
Sep 9, 2011
I have a samsung galxy 5 phone.. with ANDROID 2.1 installed in it.. I wan2 access internet thru wi-fi on my mobile. I have got myself a wireless router at home. the wi-fi settings page of my phone says that i am connected to the network i wanna connect to... but when i try 2 access any website thru d browser , it displays page not found..
a new samsung galaxy y phone and am unable to open websites using my wifi network my modem is mtnl 450tc1. my phone shows that its using 192.168.1.2. no changes can be made to dis option My phone shows that it has been conected to the wifi but it does not loads the websites
My phone won't connect to my Belkin router (F5D7230-4) thru the wifi connection. It previously had connected fine, but I'd reset the router today & changed the password. I'm able to connect with no problems (thru wifi or regular connection) on my pc. I went to my Belkin router page and have looked at my MAC settings (only option it gives is to clone, which I tried), I've also tried changing the password....my phone also gave me the option of hitting the WPS button on my router within 2 minutes, which I did, but it would not configure automatically as it was supposed to.
I received my upgrade yday from shop. I'm using galaxy 11s but have now galaxy 111 x my 11s is still connected to fone as hubby got it but I can't get wifi on new fone x iv sky broadband. does it take 24 hrs or what's wrong.
I need to connect my laptop with android phone thru Wi-Fi. I have created ad hoc WEP connection in my laptop. Now, the signal strength in my laptop Wi-Fi shows "no signal". Therefore , my phone is not detecting the ad hoc connection which I have created.
I have wireless connection through vodafone. I have just bought my daughter a samsung galaxy with wifi...I have forgottn my password to connect her... Where do I got my password from if I have forgotten it?
Just bought a samsung galaxy s4 and I haven't been able to get my WiFi to work with my Belkin router (Surf N300 wireless router, model F7D6301). I tried giving it a static IP and got it to connect to the network, but it still wasn't able to leverage the WiFi for use.The router firmware is up to date.
I have a Samsung galaxy tab 10.1 and I cant connect to my wifi network. Months ago I was able to connect to it but since I changed the router settings I cant, and now it just says it's out of range. My laptop is still able to connect but the tablet doesn't.
just got a samsung galaxy s2 great phone but cannot connect to home network via netgear router, i can see the network but if wont connect. i can connect the my work one no problem via wep key.i have tryed every thing do still no go
I am unable to connect to my home network over VPN from my Samsung Galaxy S3 phone. I have a Netgear WGR614v01 wireless router. This router has my desktop computer and windows 2012 server plugged into it. The server is a domain controller that has the following roles installed: DHCP, DNS, ADDS, IIS, and Remote Access. My Windows 7 Professional desktop is joined to the domain controller. The wireless router serves my netbook, smartphones, and ipods. They do not authenticate with the DC but do get a DHCP ip address from the server.I have my Samsung Galaxy S3 phone that I'd like to be able to use to VPN into my network. Here is what I have done;Disabled the DHCP service on the router. Setup port forwarding to forward PPTP to my server's static IP address on port 1723.I created a user on my DC for this purpose and enabled the account for network dialup service.I created a DHCP Relay Agent in the Remote Access MMC.I opened up the Remote Access app on the server's firewall.On my phone I setup a 'New VPN Connection...' I use the username/password of the user I created for this purpose. I put in my ip address that I have from my ISP.
My brother got a samsung galaxy s captivate yesterday to replace his pos iphone 3g on Rogers Wireless. He wants to connect to the Dlink DIR-615's wifi to cut down on the data usage while at home on his 500mb per month data plan the ssid and the password are fine, but it hangs on the message "obtaining IP address..." which then after a while refuses to continue to connect and labels the connection "disabled"... the connection type is WPA2 AES something or other so as to guarantee wireless N connections for the xbox and my pc (the ps3 doesn't really do everything, it only does G not N lol)...
I am not familiar with the phone as it's not mine (someday maybe...) so maybe there is a setting i missed. I do know the router is not mac address restricted (meaning only certain computers are allowed to connect).
When I try to connect the galaxy to the wireless network, the tablet shuts down (to the start page, unlock page) when it is searching for the ip address for the network. The firmware is 1.55.02. Cannot get upgrade as not available from Cisco. Have disconnected all other devices from the network in case there is some interference problem.
I cant surf the net on my Galaxy S2 through my home wifi connection but I can access files on my phone through Kies Air wirelessly from it. How do I fix this?
I am trying to connect to my office wifi which uses a proxy server. Scenario 1: I am using Samsung Bada (wave 1), connected to the internet successfully and also any applications that require an internet connection including Samsung's app store. While, connecting via open networks like home wifi and other friends' wifi also worked without any issue. Scenario 2: Now I also have an android based Galaxy pocket: even after entering all the required proxy setting as mentioned above, I can access websites via browser but cannot access samsung's app store, google's play store, skype, sipdroid etc. I know it is nothing to do with the network administration as I am still accessing via my samsung wave but not via android. Is there anything like a network profile I need to assign for these applications?
Every device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes ! ! Last configuration change at 10:18:26 MST Sun Dec 23 2012 ! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
How do I connect Samsung mobile phone F-480i to my pc (which has Samsung New PC Studio) by bluetooth? to how this can be done. I've struggled for a long time without success.
The note 2 can connect with the router if I have the router set to open but when I change the security to anything else it keeps re-authenticating and will not connect.
Have only been using the wired before and it works great but now need to connect note 2 to do backups. I have even tried resetting the router back to factory settings and turning on WiFi again and no luck.
I setup an accespoint on my laptop. Now I want to connect my Phone (android) to this network but, he is asking for an Ip-address I tried the following;
I just got a Samsung Galaxy S4. As I have always done with all of my devices that connect wirelessly, I went into the D-Link software and added my phone's MAC address to the network filter list. The security settings are WPA/WPA2. When I try to connect, the phone is able to see my Wi-Fi network, and it asks for my password, which I enter. It keeps trying to connect, but then it says an "authentication error occurred." I have checked and triple-checked the password, and it is correct. I have also checked and triple-checked the MAC address, and it is correct. I have rebooted the router and the phone several times each.
So I was having problems staying connected to the wifi on my samsung galaxy mini. Many fixes for other models in the galaxy series, limited fixes for the 'mini' version. Long story short, I was told to edit the DHCP lease time in my router settings.There I bumped into another problem.No mather what I tried there was no way of accessing the page. Weird thing is I remember having logged in on it before.Usually you just have to give in the standard gateway which should be 192.168.0.1 in my case. I checked it using ipconfig in cmd and my presumption was confirmed.Then I tried resetting the router to set back any settings that might've accidently been changed, in the hope that it would also reset the standard gateway and no succes.Now my knowledge about networking is verry limited.
I have CUWN, WLC 5508 is installed and APs are 1142. Network is working fine but I am facing the problem with Android phone which are not browsing for internet.
Android phones connectes with wi-fi, it takes IP from DHCP well, which is pingable from any node of network. even I got be GUI of WLC on Android, but when it goes to browes for internet the message displayed " Page cannot be disply".
In same scenario if configure the Public IP on Android Phone (Via DHCP or Static) then it runs the internet smoothly.
I have a Samsung Galaxy 10.1 tablet and have bee trying to connect to my WRVS4400N router with VPN through the "on board" software as well as with the Any Connect software from Cisco. I have no issues at the moment using Quick VPN from my laptop.
When using the Any Connect software I receive the following messages:
Security warning: untrusted certificate AnyConnect cannot verify the identity of <IP address>. Would you like to continue anyway? - Certificate does not match the server name. - Certificate is from an untrusted source. - Certificate is not identified for this purpose [Accept] [Details] [Cancel]
If I select accept, the following error is received:
"Error: Connection attempt has failed due to server communication errors. Please retry the connection".
I have tried setting up the on board VPN with the Samsug Galaxy but every attempt has resulted in a time-out of the connection.
I have a number of devices in my house connecting without issues:
1.) PS3 2.) XBox 360 3.) HP CM1415FNW 4.) Sony Dash 5.) iPone 4g/4gs 6.) Asus EP121 7.) Six Laptops 8.) TV 9.) Denon A/V
My android cant even pickup the SSIDs, I stand beside and still nothing, the SSIDs are not hidden, Ive tried different encryptions, changed from AES to TKIP, tried different channels. I have two seperate SSIDs, one 2.4GHz with B/G/N and a 5.0 with A/N Available, neither SSID is getting picked up