Cisco Switching/Routing :: 1941w Samsung Galaxy Note LTE Cannot See Wi-Fi Networks
Mar 20, 2012
I have a number of devices in my house connecting without issues:
1.) PS3
2.) XBox 360
3.) HP CM1415FNW
4.) Sony Dash
5.) iPone 4g/4gs
6.) Asus EP121
7.) Six Laptops
8.) TV
9.) Denon A/V
My android cant even pickup the SSIDs, I stand beside and still nothing, the SSIDs are not hidden, Ive tried different encryptions, changed from AES to TKIP, tried different channels. I have two seperate SSIDs, one 2.4GHz with B/G/N and a 5.0 with A/N Available, neither SSID is getting picked up
View 4 Replies
ADVERTISEMENT
Nov 12, 2012
The note 2 can connect with the router if I have the router set to open but when I change the security to anything else it keeps re-authenticating and will not connect.
Have only been using the wired before and it works great but now need to connect note 2 to do backups. I have even tried resetting the router back to factory settings and turning on WiFi again and no luck.
View 3 Replies
View Related
Mar 13, 2013
Samsung will be releasing the Galaxy Note 8 sometime in the second quarter of this year.
I have an Amazon Prime Account and would like to know if I can transfer the downloaded movies I purchase on Amazon on the Galaxy Note 8.
I have Windows 8 installed on my computer at home.
View 1 Replies
View Related
Jan 24, 2013
I have an N1 Wireless Router (F5D8231-4 ver 2). It is setup with WPA/WPA2-PSK on and links to a Windows Laptop and an iPod Touch perfectly. I cannot get my new Samsung Note 10.1 (GT-N8000) connected. I have tried changing the router to WEP 128bit and even no security. The Samsung links perfectly to my neighbours Thomson Wireless Modem/router with no security. The Belkin N1 is recognising the android trying to link and assigns an IP. The Samsung instantly sees the Belkin network ( says " very strong signal") & tries to connect. It saves the network but gets stuck trying to obtain an IP address & reports "network disabled" and "weak signal".
View 1 Replies
View Related
Dec 29, 2012
I have a Belkin N Wireless Router Model F5D8236-4 V2. WEP security.. We have just bought a Samsung Note 10.1 Tablet. We have entered the password Key and the tablet is saying that the network is 'secured,saved' but it will not connect to the internet. We have several laptops and phones that work ok but the Samsung Note will not connect.. We have taken the Note to a friends house and it connects to the internet no problem so I know issue is with the router..
View 3 Replies
View Related
Dec 23, 2012
ant i use internet of my pc in my galaxy y
View 1 Replies
View Related
Jan 24, 2013
I have a Samsung galaxy tab 10.1 and I cant connect to my wifi network. Months ago I was able to connect to it but since I changed the router settings I cant, and now it just says it's out of range. My laptop is still able to connect but the tablet doesn't.
View 2 Replies
View Related
Jun 8, 2012
no network and forget my samsung password
View 1 Replies
View Related
Aug 29, 2011
just got a samsung galaxy s2 great phone but cannot connect to home network via netgear router, i can see the network but if wont connect. i can connect the my work one no problem via wep key.i have tryed every thing do still no go
View 13 Replies
View Related
Dec 15, 2012
I have wireless connection through vodafone. I have just bought my daughter a samsung galaxy with wifi...I have forgottn my password to connect her... Where do I got my password from if I have forgotten it?
View 1 Replies
View Related
May 12, 2013
I just got a Samsung Galaxy S4. As I have always done with all of my devices that connect wirelessly, I went into the D-Link software and added my phone's MAC address to the network filter list. The security settings are WPA/WPA2. When I try to connect, the phone is able to see my Wi-Fi network, and it asks for my password, which I enter. It keeps trying to connect, but then it says an "authentication error occurred." I have checked and triple-checked the password, and it is correct. I have also checked and triple-checked the MAC address, and it is correct. I have rebooted the router and the phone several times each.
View 1 Replies
View Related
Dec 6, 2012
My samsung galaxy next turbo GT-s 5570 keeps saying emergency calls only all the time?
View 1 Replies
View Related
Dec 1, 2011
a new samsung galaxy y phone and am unable to open websites using my wifi network my modem is mtnl 450tc1. my phone shows that its using 192.168.1.2. no changes can be made to dis option My phone shows that it has been conected to the wifi but it does not loads the websites
View 1 Replies
View Related
Mar 18, 2013
So I was having problems staying connected to the wifi on my samsung galaxy mini. Many fixes for other models in the galaxy series, limited fixes for the 'mini' version. Long story short, I was told to edit the DHCP lease time in my router settings.There I bumped into another problem.No mather what I tried there was no way of accessing the page. Weird thing is I remember having logged in on it before.Usually you just have to give in the standard gateway which should be 192.168.0.1 in my case. I checked it using ipconfig in cmd and my presumption was confirmed.Then I tried resetting the router to set back any settings that might've accidently been changed, in the hope that it would also reset the standard gateway and no succes.Now my knowledge about networking is verry limited.
View 8 Replies
View Related
Nov 2, 2012
Connect to internet on my mobile samsung galaxy y GT s5360
View 1 Replies
View Related
Apr 30, 2012
Use Samsung galaxy y s5360 Wi-Fi connection without wireless video?
View 1 Replies
View Related
Jan 8, 2012
My phone won't connect to my Belkin router (F5D7230-4) thru the wifi connection. It previously had connected fine, but I'd reset the router today & changed the password. I'm able to connect with no problems (thru wifi or regular connection) on my pc. I went to my Belkin router page and have looked at my MAC settings (only option it gives is to clone, which I tried), I've also tried changing the password....my phone also gave me the option of hitting the WPS button on my router within 2 minutes, which I did, but it would not configure automatically as it was supposed to.
View 1 Replies
View Related
Jan 2, 2013
i m using samsunggalaxy young s5360. i am having airtel broadband wifi and i wanted to connect to my mobile.
View 1 Replies
View Related
Feb 22, 2013
I am unable to connect to my home network over VPN from my Samsung Galaxy S3 phone. I have a Netgear WGR614v01 wireless router. This router has my desktop computer and windows 2012 server plugged into it. The server is a domain controller that has the following roles installed: DHCP, DNS, ADDS, IIS, and Remote Access. My Windows 7 Professional desktop is joined to the domain controller. The wireless router serves my netbook, smartphones, and ipods. They do not authenticate with the DC but do get a DHCP ip address from the server.I have my Samsung Galaxy S3 phone that I'd like to be able to use to VPN into my network. Here is what I have done;Disabled the DHCP service on the router. Setup port forwarding to forward PPTP to my server's static IP address on port 1723.I created a user on my DC for this purpose and enabled the account for network dialup service.I created a DHCP Relay Agent in the Remote Access MMC.I opened up the Remote Access app on the server's firewall.On my phone I setup a 'New VPN Connection...' I use the username/password of the user I created for this purpose. I put in my ip address that I have from my ISP.
View 2 Replies
View Related
May 28, 2011
My brother got a samsung galaxy s captivate yesterday to replace his pos iphone 3g on Rogers Wireless. He wants to connect to the Dlink DIR-615's wifi to cut down on the data usage while at home on his 500mb per month data plan the ssid and the password are fine, but it hangs on the message "obtaining IP address..." which then after a while refuses to continue to connect and labels the connection "disabled"... the connection type is WPA2 AES something or other so as to guarantee wireless N connections for the xbox and my pc (the ps3 doesn't really do everything, it only does G not N lol)...
I am not familiar with the phone as it's not mine (someday maybe...) so maybe there is a setting i missed. I do know the router is not mac address restricted (meaning only certain computers are allowed to connect).
View 3 Replies
View Related
May 28, 2013
Just bought a samsung galaxy s4 and I haven't been able to get my WiFi to work with my Belkin router (Surf N300 wireless router, model F7D6301). I tried giving it a static IP and got it to connect to the network, but it still wasn't able to leverage the WiFi for use.The router firmware is up to date.
View 4 Replies
View Related
Apr 1, 2012
I have a Samsung Galaxy 10.1 tablet and have bee trying to connect to my WRVS4400N router with VPN through the "on board" software as well as with the Any Connect software from Cisco. I have no issues at the moment using Quick VPN from my laptop.
When using the Any Connect software I receive the following messages:
Security warning: untrusted certificate
AnyConnect cannot verify the identity of <IP address>. Would you like to continue anyway?
- Certificate does not match the server name.
- Certificate is from an untrusted source.
- Certificate is not identified for this purpose
[Accept] [Details] [Cancel]
If I select accept, the following error is received:
"Error: Connection attempt has failed due to server communication errors. Please retry the connection".
I have tried setting up the on board VPN with the Samsug Galaxy but every attempt has resulted in a time-out of the connection.
View 2 Replies
View Related
Sep 9, 2011
I have a samsung galxy 5 phone.. with ANDROID 2.1 installed in it.. I wan2 access internet thru wi-fi on my mobile. I have got myself a wireless router at home. the wi-fi settings page of my phone says that i am connected to the network i wanna connect to... but when i try 2 access any website thru d browser , it displays page not found..
View 4 Replies
View Related
Sep 21, 2011
When I try to connect the galaxy to the wireless network, the tablet shuts down (to the start page, unlock page) when it is searching for the ip address for the network. The firmware is 1.55.02. Cannot get upgrade as not available from Cisco. Have disconnected all other devices from the network in case there is some interference problem.
View 1 Replies
View Related
Mar 23, 2013
I own a 1941w that is covered by a service contract and I'm entitled to download software for it. But unfortunately I don't see any option to download AP software for it. I need an upgrade for the internal AP to connect it to a virtual WLC.Apparently I need ap801-rcvk9w8-tar.152-2.JB.tar to get this done.I can find it under the 800w series, but I don't own a service contract for that so I can't download anything.
View 1 Replies
View Related
Dec 27, 2012
I'm currently trying to get up to speed on a 1941W ISR. I belive i have most of the configuration correct based on reading the documents on this site. However, i'm noticing that my lan to lan network performance is very slow. Peaking out about 3mbs. I was reading some documentation that suggested MGF (MultiGigabit Fabric) might resolve this problem.
I have a basic setup in my test environment trying to emulate a branch deployment. 1941W connected to a access switch (3400).
- I'm getting slow perfomance (thoughput) between the vlans 66,30,10. Will MGF fix this problem? How do i configure it?
Building configuration...
Current configuration : 7474 bytes
!
! Last configuration change at 09:26:04 PCTime Fri Dec 28 2012 by xxx
! NVRAM config last updated at 09:26:05 PCTime Fri Dec 28 2012 by xxx
[Code]......
View 4 Replies
View Related
Jun 12, 2013
I've a Cisco 1941W router which is DHCP server for data-VLANs and uses ip-helper for voice-VLANs. [code] I don't know why I can't have IP from wireless voice VLAN whereas it is OK and wired voice VLAN and conf is the same!
View 4 Replies
View Related
Nov 15, 2011
This is the message that I am getting from my 1941w router. I have a isakmp tunnel built with a GRE tunnel going through it.
View 15 Replies
View Related
Jul 25, 2012
we have approx. 70 Cisco 1941W routers deployed in our company. I used to be able to console into the internet wireless AP by issuing the below command:
service-module wlan-ap0 session
However lately this hasn't been working and AP just simply refuses connection. Here is what I have for Status. I have tried reseting the Service Module to no avail.
Router#service-module wlan-ap0 status
Service Module is Cisco wlan-ap0
Service Module supports session via TTY line 67
Service Module is failed
Service Module reset on error is disabled
Service Module heartbeat-reset is enabled
Service Module is in fail open
Service Module status is not available
View 3 Replies
View Related
Apr 20, 2013
open specific ports on 1941w Integrated Services Router.This specific router is a wireless VPN router that has a wired module and a wireless module and VPN so I'm getting 3 subnets on my network - 192.168.1.. for the wired connections, 10.100.1.... for wireless LAN connections and 10.100.2... for VPN remote connections.I know that by default all connected computers can access my Linux server data through telnet so the telnet port is open by default, the problem is that I have some other software licensing system on my Linux box that needs to be accessed through port 27000 and most of my users are using wireless connections and can't access that license because post 27000 is closed.what is the comand to open this post or any other port that I need to be open on the wired module, wireless module and VPN or at least poit me to somewhere where I can find all the commands that I can use for this router?
View 6 Replies
View Related
Jul 17, 2012
We have an 891 router at our resort but our internal private traffic and public wifi traffic are mixed (two wireless ap are providing the wireless). The boss wants to seperate out the internal private traffic. I felt I could do this with two vlans and one internet connection pretty easily.
The boss threw me a screwball and and said he was going to get a seperate DSL account for our internal private traffic. So what he wants is the 891 to handle two internet connections and have two seperate lans (vlans?).
I see talk about using the 891 for failover and two internet connections, but I'm just not quite sure and I don't want to play with it for hours before knowing what I'm getting into,
So can I run two internet connections and keep the traffic seperate (one lan/vlan per internet connection seperated)?
View 6 Replies
View Related
Jan 7, 2012
I'm fairly new to cisco and the ASA 5505 I have the asa connected to the internet on 0/0 I have a computer connected to port 1 and on port 2 I have a netgear router. the asa is 192.168.1.1 and the netgear router is 10.1.5.1 I cannot get the computer connected to the asa to communicate with the devices on the netgear router and visa versa. Here is the show version.
ASA Version 8.0(4)!hostname ciscoasaenable password Yn8Esq3NcXIHL35v encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address dhcp setroute!interface Ethernet0/0switchport access vlan 2!interface (code)
View 1 Replies
View Related
Aug 6, 2012
I have 2 networks.
NETWORK 1:EOC connection fro ISP going into a router (not the RV042) with a static WAN address from ISP. This router is hooked up to a switch that all the computers are connected to. All the computers on this network are using 192.168.1.x addresses. Most of these addresses are static, but the router is running DHCP in case we hook up temporary computers like laptops or client machines to this network.
NETWORK 2:DSL connection going into a router (not the RV042) with a static block of IPs from ISP. (8 IPs, 5 usable for the WAN interface, 1 static IP is being used for WAN interface). This router has a VPN connection set up for remote access to the linux machines on this network. This router is running DHCP on the LAN interface for this network with addresses 172.16.1.x. All the computers on this network are tied together with another switch, completely seperate from the 192.168.1.x network switch.
PROBLEM:We needed computers on the 192 network to be able to access computers on the 172 network. Someone decided to just run a cat 5 cable from the 192 switch to the 172 switch (not the routers, the switches). This "worked" - badly. Appearently there is a DHCP conflict (or something else going on) that was causing the router on the 172 network to try and assign addresses to the 192 network computers, and it was also "resetting" a connection about once an hour. This crashed our server on the 192 network. I disconnected that cat 5 cable between the two siwtches, and now each of the two networks are working properly, but they are now completely isolated from one another.
I need to create a bridge between the 2 networks so that machines on the 192 network can access machines on the 172 network while filtering out DHCP broadcasts from either network router to the other network. (I may need to filter out other protocols as well, but don't know yet.)So, I see 3 potential ways of doing this but don't know if they will work:
1) Can I just set up multiple subnets on the LAN interface of the RV042 and just run 2 cat5 cables from each switch on the two networks to the LAN ports of the RV042?
1a) If I do set up multiple subnets on the LAN interface of the RV042, do I need to assign the two ports to different VLANs? (I don't see any way to set each port to a specific IP address.)
2) Can I set up the 2 WAN ports on the RV042, one static for each network, and will the RV042 route traffic from 1 WAN port to the second WAN port?
3) Is there some other way I should consider setting this up?
Finally, someone mentioned that once I get the RV042 set up correctly as a bridge, I will need to route 172 addresses on the 192 network to the 192 interface of the RV042 via the DHCP router on the 192 network, and conversely, I will need to route 192 addresses on the 172 network from the DHCP router to the 172 IP interface of the RV042. I think this will be easy enough to set up in each of the DHCP routers...
View 3 Replies
View Related
