Samsung will be releasing the Galaxy Note 8 sometime in the second quarter of this year.
I have an Amazon Prime Account and would like to know if I can transfer the downloaded movies I purchase on Amazon on the Galaxy Note 8.
I have Windows 8 installed on my computer at home.
The note 2 can connect with the router if I have the router set to open but when I change the security to anything else it keeps re-authenticating and will not connect.
Have only been using the wired before and it works great but now need to connect note 2 to do backups. I have even tried resetting the router back to factory settings and turning on WiFi again and no luck.
I have a number of devices in my house connecting without issues:
1.) PS3
2.) XBox 360
3.) HP CM1415FNW
4.) Sony Dash
5.) iPone 4g/4gs
6.) Asus EP121
7.) Six Laptops
8.) TV
9.) Denon A/V
My android cant even pickup the SSIDs, I stand beside and still nothing, the SSIDs are not hidden, Ive tried different encryptions, changed from AES to TKIP, tried different channels. I have two seperate SSIDs, one 2.4GHz with B/G/N and a 5.0 with A/N Available, neither SSID is getting picked up
I've got a E3000 router and I'd like to be able to stream movies and access files from the USB connected HD on my router to my galaxy tablet.I understand that this can be done. I've poked around and cannot find anything that's worked for me.
View 6 Replies View RelatedI think it should be possible to create an IPSec tunnel between a Netgear FVS336Gv2 firewall/router and AWS VPC however, I've been unable after several tries. How do I setup a connection for a Amazon VPC?
View 1 Replies View RelatedWe are in the process of setting up an Amazon S3 network backup of the NAS server we have in our office. We are using a Synology NAS to backup to Amazon s3, and we use a Cisco PIX 501 to secure our network. The backup from the NAS to Amazon is going painfully slow, so I contacted Synology to resolve the issue. After they examined everything, they think the router is filtering outbound traffic, and this is causing the upload to slow down. I was told the upload should happen over HTTP and HTTPS, and I made sure these ports where open through the Access Rules. There are no rules defined in the Filter Settings.
I looked at the settings with the PDM, and I can't find where the filtering would be. I'm not too familiar with the PIX or all the network settings involved.
i need to add a lot of mac addresses in mac addr filter table. many routers do not allow me to add a note for each mac address. that makes management a bit difficult.
eg.
field 1, field 2, enable
xx:xx:xx:xx:xx:xx , peter pc, y
xx:xx:xx:xx:xx:xx, mary pc, n
I have an N1 Wireless Router (F5D8231-4 ver 2). It is setup with WPA/WPA2-PSK on and links to a Windows Laptop and an iPod Touch perfectly. I cannot get my new Samsung Note 10.1 (GT-N8000) connected. I have tried changing the router to WEP 128bit and even no security. The Samsung links perfectly to my neighbours Thomson Wireless Modem/router with no security. The Belkin N1 is recognising the android trying to link and assigns an IP. The Samsung instantly sees the Belkin network ( says " very strong signal") & tries to connect. It saves the network but gets stuck trying to obtain an IP address & reports "network disabled" and "weak signal".
View 1 Replies View RelatedRegion : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I just bought and installed this wireless router, specifically so that I could use me kindle..but, keep getting rejected due to a password error...the password is correct. On Amazon it looks like there may be a setting that needs adjustment in order to accept the Kindle..
I have an E2000, and I connect wirelessly through my Macbook. When I use the internet on any laptop I connect to the router (not just the Mac) I can't log in to Facebook, Amazon, Ebay, Hotmail, or any other site, and Google image pages only load halfway. In certain websites I try to use I cannot click anything at all. I have tried unplugging and plugging back in, and I have tried resetting the router.
View 1 Replies View RelatedI have a Belkin N Wireless Router Model F5D8236-4 V2. WEP security.. We have just bought a Samsung Note 10.1 Tablet. We have entered the password Key and the tablet is saying that the network is 'secured,saved' but it will not connect to the internet. We have several laptops and phones that work ok but the Samsung Note will not connect.. We have taken the Note to a friends house and it connects to the internet no problem so I know issue is with the router..
View 3 Replies View RelatedLet's suppose I'm connected to a network whose admin asked in a friendly way not to download anything but certain things he specified.He never came to my machine or setup any kind of client to it. The question now is, is there any chance he knows what I download???Does he know the name and the extension of the file I download if I use Utorrent and magnet links?
View 2 Replies View RelatedI have downloaded the new firmware for the SG500. I see there are two files included in the download, a boot file (rfb) and regular firmware image (ros). I have looked and haven't seen anything about the rfb files. I know it is a boot file, but do not know if I should update the boot file first and then the firmware image or vice versa. Also, in my update screen on the SG500, the boot file option is greyed out.
View 1 Replies View RelatedHow can I install cache server for caching downloaded files ?I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8 )
View 1 Replies View RelatedHow can I install cache server for caching downloaded files ?
I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8)
I Have a Firewall ASA 5505 with asa 8.4(2) asdm 6.4(5) I have only one Public IP services and need to publish on the Internet
External User (Internet) -> Calls connection on port 22 Internal server 192.168.1.124
External User (Internet) -> Calls connection on port 80 of the Internal 192.168.1.124 server or other server the same inside.
In the first moment I'm just testing the access port 22.I had it working in version 8.2 but after I updated to 8.4 does not work, I've tested several different configurations.
Configuration (see asa5505_config.txt file)
object network remoto_ssh
host 189.120.190.229
object network linux_ssh
host 192.168.1.124
nat (inside,outside) static remoto_ssh
access-list outside_access_in line 1 extended permit tcp any object linux_ssh eq ssh
ERROR: Address 189.120.190.229 overlaps with outside interface address.
ERROR: NAT Policy is not downloaded
When i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies View RelatedI can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems
I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
l do not know how to download software that will enable me to watch hd movies on my pc.
View 2 Replies View RelatedI have a 655 and two TVs. One is connected to my network by a Samsung 5700 Blu Ray player, and the other is connected by x box. The x box is 20 ft away from my router and the Blue Ray is about 60 away with one wall between. The x box pulls movies down and plays them no problem, and Blue Ray takes about a minute for loading the moving, will start playing but them pauses several times throughtout the movie showing the loading sign on screen.
View 2 Replies View RelatedI'm trying to delete downloaded movies off my laptop to free up some space-I tried uninstall but realize it isn't a program-we want to keep only a couple of movies-no success...
View 2 Replies View RelatedMy new Samsugn blu ray player must be connected to the cable modem at the same time as my PC to stream movies says Netflix. Only problem is there is only one HDMI connection back there. I do not wish to by surrounded by RF so I want to go with cables. What is the best way to proceed? I repeat, I do not wish to have a wireless router.
View 1 Replies View RelatedI have a NAS (DLink) connected to my router, and my samsung smart TV. I currently use a Boxee Box for the family in another room, and it works great. However, I now want to be able to watch the movies (.mkv's) stored on my NAS, on my smart TV in my room. I want to be able to do so without leaving my PC on. The TV uses a Samsung 'dongle' to connect to my WiFi.
View 4 Replies View RelatedHow to send movies from pc to tv with wireless router
View 5 Replies View RelatedI have a readynas duo connected by cable to my dir 825,and i want to stream movies from the nas to my zbox,wich has W7 32bit and a sitecom dual N usb adapter,but it seems my wireless speed is to slow for mkv and m2ts(playback stutters),when i copy a file from the nas to my zbox i get 7,60MB using a 1,33gb file,when i copy the same file from the zbox to the nas speed is a little better around 8.20MB.all my devices are in the same room.
View 8 Replies View RelatedHave a look at the diagram showing my router/modem setup here:I'm not sure the proper terminology or how to say this but I would like Router A to broadcast 1 IP and and Router B to broadcast another.For "business" reasons I need my "normal" IP on router A and for "pleasure" reasons, I want to have different DNS on router b.I'm in canada and I'm using a DNS service to make it appear like I'm from the US.
View 17 Replies View RelatedWe have a Netgear N600 hookedup to DSL line.
1. Now can't watch Netflix movies through Sony bluray or on computer.
2. Takes an hour to bring up documents to print.
3. While trying to load a page connection to server will be reset.We connected one of the computers to the modem. didn't work any better.
im looking for a wifi device that i can watch movies from my laptop on my tv.
View 1 Replies View RelatedCan I use my d-link wireless router to send movies to my hd tv?
View 3 Replies View Relatedcant i use internet of my pc in my galaxy y
View 1 Replies View RelatedMy firewall slows down my download, when I'm trying to download music or movies!
View 1 Replies View RelatedMy internet worked for like 4-5 days then suddenly stopped while I was watching some random movies on youtube then I keep getting this error :"Local area connection" doesn't have a valid IP configuration, I could go see the university support, but the problem is they don't work during the weekend and that's the second time I have this problem within a week. That's annoying and leave me without internet for couples of days[CODE]
View 10 Replies View Related