Linksys Wireless Router :: E2000 Can't Log In To Facebook / Amazon / Ebay / Hotmail
Mar 25, 2012
I have an E2000, and I connect wirelessly through my Macbook. When I use the internet on any laptop I connect to the router (not just the Mac) I can't log in to Facebook, Amazon, Ebay, Hotmail, or any other site, and Google image pages only load halfway. In certain websites I try to use I cannot click anything at all. I have tried unplugging and plugging back in, and I have tried resetting the router.
View 1 Replies
ADVERTISEMENT
Jan 22, 2012
I am no longer able to access the "EBay" website while working on my wireless router. I have 3 personal computers, a laptop, 3 android smartphones & 2 ipod touch's. They all work fine, from my wireless router.I have the WRT54GS ver. 6.
The problem started with not being able to access EBay. I called the EBay people. Then, I called my local Internet Service Provider. There were at least 10 phone calls, to each. Then, I called the Linksys people. The lady told me that I had an outdated router and that I needed to get a new one. Well, I had previously bought the most expensive one I could get, said it was for "optimum" movie & gaming from Cisco.
View 9 Replies
View Related
Feb 22, 2011
How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?
View 9 Replies
View Related
May 7, 2012
I am attempting to block Facebook on a WRT160N firmware v3.0.00. I have a successful policy that blocks edit.com for instance and attempted to add url... I don't want to add keyword blocking as multiple news articles are in regards to Facebook. We simply do not want the Facebook website allowed. I tested the other policies on a network-wide setting, applying it to all IPs successfully, added Facebook to them and it goes right around the block. My guess is that Facebook is most likely designed to make it purposely difficult to block.
I went through the recent articles in search, but they primarily dealt with incorrect application of the policy (spec'ing MAC, or IPs), which isn't the case here. Eventually I will apply the policies to specific Macs, but I want them to work first.
View 2 Replies
View Related
Feb 22, 2012
I have the WRT310N v2 and having been having an issue with the Facebook games for the past week. I can logon to facebook just fine, but when I try to go into a game or accept gift requests, nothing works and the page always times out. However, when I disconnect the modem cable from the router and plug it in directly to the desktop, everything works fine. All other websites (Shockwave and Pogo) work just fine, but just Facebook has the problem when the router is connected.
I went through all the settings for the router. Nothing is blocked and everything is in fine working order. The only thing I noticed was that there was a firmware update to 2.0.01 which I did, and still the problem remains. I've made sure that there are no restrictions on IE or Chrome as well. I first thought that the router was crapping out, but have since disregarded that.
View 2 Replies
View Related
Nov 6, 2012
I've been using my WRT310Nv2 Cisco wireless Gigabit N router for 2 weeks now, and sometimes, it's blocking access to Facebook.comI am not aware if it does the same thing with other websites, but my guess is that if I fix this one, I'll fix them all. So here I go, I click on my Facebook icon in my bookmarks and all goes well. Then, a while after, Facebook doesn't respond anymore and I'm send to a page that says "this is probably not the webpage you are looking for!" and it goes on about someone probably trying to hack my Internet and so on. But it's impossible: my network is under a solid WPA/WPA 2 security access. So I try again and click on the FB icon, and it shows me this:
"Invalid URL
The requested URL "/", is invalid.
Reference #9.c2c28f18.1352263449.304a8c9"
View 9 Replies
View Related
Jun 16, 2012
Can you suggest me how to block facebook,gmail,yahoo in cisco wireless router Model No;-WRT610N version 2
View 4 Replies
View Related
Jan 15, 2013
I want to block sites like facebook during my workday but allow the rest of the internet.
The attached settings block facebook as desired during the filter times but after 6:30pm the filter expires and the entire internet is blocked (not just facebook). All of my browsers act as if they are hanging and won't load pages until I disable the filter.
I've also tried creating two different filters (one at a time). The first allowed full internet access all the time and the second allowed access the opposite times of the work filter. But to no avail.
View 2 Replies
View Related
Nov 20, 2011
On E4200 Firmware Version: 1.0.03, I managed to successfully set up "Internet Access Policy" (not the "Parental Controls") to set up the times when internet access is disabled for various IPs on my network.
But I could't setup a policy to block facebook.com. What I am doing wrong? See the attached screen shot. I did click the "Edit List" and apply this polity to the IP Address Range 192.168.1.2 to 192.168.1.254.
View 9 Replies
View Related
Jun 4, 2012
Recently purchased the EA3500 router. Everything seems to work great except for Facebook on mobile devices with Android OS using both apps and browser. I can access FB using a laptop's browser.
View 9 Replies
View Related
Apr 24, 2011
We are in the process of setting up an Amazon S3 network backup of the NAS server we have in our office. We are using a Synology NAS to backup to Amazon s3, and we use a Cisco PIX 501 to secure our network. The backup from the NAS to Amazon is going painfully slow, so I contacted Synology to resolve the issue. After they examined everything, they think the router is filtering outbound traffic, and this is causing the upload to slow down. I was told the upload should happen over HTTP and HTTPS, and I made sure these ports where open through the Access Rules. There are no rules defined in the Filter Settings.
I looked at the settings with the PDM, and I can't find where the filtering would be. I'm not too familiar with the PIX or all the network settings involved.
View 1 Replies
View Related
Aug 21, 2011
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
View 9 Replies
View Related
Jan 27, 2012
I would like to set the router's dns entries but I don't see how to do that. Basic setup page has DNS setep for the DHCP scope but I don't want to push dns to my pc's. What I am looking to do is to use an alternate dns to what my service provder pushes and still have the abliity to route on my internal network.
View 1 Replies
View Related
Oct 2, 2011
We bought our Linksys E2000 in the summer and went to set it up but something came up... Now we are trying to set it up but cannot find our WPA key... Where can we find this?
View 2 Replies
View Related
Jan 28, 2012
So i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?
View 4 Replies
View Related
Nov 3, 2011
E2000. I run the setup program, my laptop sees the router and it shows a strong signal. When I try to connect with it, it won't connect.
View 9 Replies
View Related
May 28, 2012
I've been looking around like a madman now in the settings. where can I turn off my WPS ? Just cracked my own PIN within 6 hours with Reaver.
View 9 Replies
View Related
Apr 24, 2011
My internet cut out last week and after calling my ISP I found out it was in fact my router that was causing the problem (regular connection to PPOE works fine). I've only had my E2000 about 2-3 months and have not had any problems with it. I've restarted the router, done a factory reset, upgraded the firmware, renewed the IP and still I cannot get any connectivity. I can access the router UI fine and I get a response from pinging it and also I have tried replacing the cables but that didn't fix the problem either.
View 9 Replies
View Related
Aug 28, 2011
I have an E2000 that I was given as a gift. I would like to use at it my office for a switch at my cubicle where I can connect 2-3 computers simultaneously. I am in a large network and am a user only. When I hooked the E2000 up today my computers would not get internet access BUT my laptop got wireless access and internet.
View 2 Replies
View Related
Dec 7, 2011
I'm using E2000 currently and meet a wireless connection problem. The speed can up to 300M bps. When I confiured the E2000 to band auto (20-40mhz) and my wireless network card to work at also auto (20-40) mode, it always down to 144M speed when connection.
If I changed some settings in E2000's wireless configuration, in the status sheet I can see it works at 40MHZ. But after a while,(5-10 mins) it automaticly down to 20MHZ and my labtop connect only got a 144M speed.
how can I deal with that to make it always keep at 300M connection? Note the previous router I used to connect to my lattop can always keep that speed.
View 2 Replies
View Related
Nov 14, 2011
I have a E2000 router that would go out and I would have to unplug and replug in every once in a while. Finally it just stopped working completely. I reset the router and now it won't let me connect. I have followed advice given to soembody else on here and went into router settings and cloned the mac, the IP address was there and reset my security settings. It let me connect to the network but not the internet...
View 2 Replies
View Related
Apr 21, 2013
I have a Linksys E2000.
It worked fine until one day, without any change at all, it simply stoped working. I mean, I can still connect through my wifi laptop connection (it shows connected to my router and says that I have an excelent signal). But, I can't reach the internet. But, If I unplug the internet cable, and plug it in my laptop, the connection works fine. A friend told me that this could be caused intentionally by the internet provider, that they would block my signal to avoid me using a wireless router, trying to force consumers to sign their own wireless service. Thus, by this friend advice, I've cloned my laptop's MAC address to the router. It didn't work either.
View 4 Replies
View Related
Sep 7, 2012
I have a Cisco E2000. When i connect to my cable modem directly, I get 30-35 MBps down and about 10 up. When I plug in to my E2000 it does that at first... but slowly over time, the speed degrades, usually down to about 5-6 down and 3-4 up. If I unplug the router, it typically restores full speed, but not for long (a few days maybe). Also, when I unplug the router, it is pretty hot.
View 4 Replies
View Related
Nov 11, 2011
For Xbox 360? currently, whether wired or wireless, my Xbox 360's NAT type is strict, and I am unable to do anything online whatsoever. Is there anyways to set up an exception, or anything that can open my Xbox's connection to my router so I can actually use it online?
View 2 Replies
View Related
Oct 28, 2011
Im using a linksys e 2000
Is there a way to block more than 4 websites, and 4 keywords?
View 4 Replies
View Related
Nov 11, 2011
I have an E2000 router that has an intermittent issue where Bonjour drops out. Suddenly my Apple TV won't see my computers, and my iPad won't see my network printer. This happens whether the Apple TV and computers are connected via wired or wireless interfaces.
Restarting the devices does not solve the issue.
Restarting the router solves the issue (until it happens again...)
My router is version 1.0, with 1.0.04 firmware.
View 3 Replies
View Related
Jul 11, 2011
I have a e2000 router and a wmp600n wireless card in my desktop pc. Everything works fine until I enable 40 mhz for faster speeds in the e2000 router. When I do this the router switches from 20 mhz to 40 mhz and I get the faster speed. But the effect of this is that my pc gets all "choppy". What I mean is that everything freezes up every few sec. For example when im minimizing windows, the windows freeze half way for about a sec then unfreezes. My mouse does the same thing, even my sound is choppy. I have to switch my router back to 20 mhz and then everything is fine again.
Using windows 7 64 bit
Using newest dirvers and firmware from Linksys.
View 4 Replies
View Related
Jan 31, 2012
I have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happend 3 times that my complete LAN disconnected for no reasonI didn't have any wired or wireless connection.
View 5 Replies
View Related
Jul 2, 2011
I have the Linksys E2000 and set it up on MacBookPro no problems. My iPhone 3G and my gf's iPhone4 connect no problem. Also, I have an XBox 360 connected via ethernet cable. Her MacBook however is constantly not getting an IP. I set her up with an EZ Key, but every time she connects we have to go through the EZ key process where I run Cisco Connect from my laptop. Why can't she just log in every time? This is frustrating me as all other aspects of this router work fine. I had her plugged into it as well with no problems. Again, it works after a dual computer Cisco Connect cycle, but my computer isn't always home.
View 1 Replies
View Related
Sep 20, 2011
For some reason my new E2000 will not connect to our Charter TV Cable internet service. Another router works fine with same cabling. I have reset EVERYTHING numerous times and cross patched -- hard patched, wireless to where my finers are bleeding. My ISP is DHCP and requires no login. So my router is set to automatically connect. Could the router be defective?
View 1 Replies
View Related
Nov 12, 2011
I got a refurbished E2000 on Amazon. Last night I set it up and when I tried accessing this website [URL], I could not connect to the server. First I thought it's the server problem and let it go. This morning it's the same probelm. I called my local cable technician and he told me it's the wifi router is blocking the website. I called the CISCO guys and they refused as it was out of warranty.
View 2 Replies
View Related
Aug 27, 2012
I want to set up another wireless laptop to access my e2000 but i dont remember the network key, How can I retirieve the key? through cisco connect maybe?
View 1 Replies
View Related
Jan 18, 2012
E2000-RM router has been working fine until about 2 days ago. Wired connection still works fine, but the wireless signals seems to be dropping in and out. I have a couple wireless devices and they all seem to be experiencing problems. Using the network connection bar on my laptop sometimes it shows a strong signal and connects no problem. Then all of a sudden the signal is gone (drops off list). It can be both the main and guest signal dropping, other times it might just be the main, etc., etc. Sometimes it shows a signal but will not connect and then a few seconds it might connect, or drop entirely. I guess the best word to describe it is highly erratic. Distance does not seem to matter. I can be 2 feet away and get the same behavior. The indicator on the box shows a signal at all times.
View 8 Replies
View Related
