Linksys Wireless Router :: WRT54GS Ver.6 - EBay Website Not Accessible
Jan 22, 2012
I am no longer able to access the "EBay" website while working on my wireless router. I have 3 personal computers, a laptop, 3 android smartphones & 2 ipod touch's. They all work fine, from my wireless router.I have the WRT54GS ver. 6.
The problem started with not being able to access EBay. I called the EBay people. Then, I called my local Internet Service Provider. There were at least 10 phone calls, to each. Then, I called the Linksys people. The lady told me that I had an outdated router and that I needed to get a new one. Well, I had previously bought the most expensive one I could get, said it was for "optimum" movie & gaming from Cisco.
View 9 Replies
ADVERTISEMENT
Aug 14, 2011
There is a way to block access to a website by password protecting it through my linksys router, which is one of thoe wrt54gs. I know I can completely block access of a website and can restrict the viewing hours of facebook at certain times through the router admin IP site but was wondering if it was possible to make it so you have to use a password to view said certain site. If there isn't is there any way maybe through a program or do I have to go through my ISP to see if they can do what I am asking for.
View 1 Replies
View Related
Mar 25, 2012
I have an E2000, and I connect wirelessly through my Macbook. When I use the internet on any laptop I connect to the router (not just the Mac) I can't log in to Facebook, Amazon, Ebay, Hotmail, or any other site, and Google image pages only load halfway. In certain websites I try to use I cannot click anything at all. I have tried unplugging and plugging back in, and I have tried resetting the router.
View 1 Replies
View Related
Jan 25, 2012
I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
View 1 Replies
View Related
Sep 15, 2011
After choosing the option "IPv4 and IPV6 Dual-Stack" in Networking > IPv6 > IP Mode, the router's configuration website is not accessible any more using it's IPv4 address or via remote management (WAN IP). However, all other router services (routing, VPN, etc.) are working fine.
View 1 Replies
View Related
May 10, 2012
Here's what I have WAN->SonicWall->E1200 Basically the E1200 is given a static IP for it's WAN that is in the range of the Sonic Wall's DMZ interface, and the DMZ interface is the default gateway of the E1200. When wireless clients connect to the E1200 they get internet access with no issues and they are on a separate network (which is intended). The issue I have is if I get on a computer that is on the Sonic Wall's LAN network, which is able to route to the DMZ network, I am unable to ping the E1200 or perform remote management (turned on in the E1200). There are phone devices that are on the DMZ network that I can ping from the LAN network. I need to be able to remotely manage the E1200?
View 1 Replies
View Related
Feb 2, 2012
2 linksys routers a E1000 (fw v2.1.02) and a E4200 (fw v1.0.03) aren't accessable via HTTPS. Both via LAN https://router-ip and via wan https://isp-router-ip:8080 . Both routers are configured correctly (allready did a rerstore to fact. defaults. while having a chat with linksys live chat support). Everything without a result.
Ie9 doesn't accept the linksys/cisco certificate. after the first warning ie9 just sais that it's unable to show the page .
I did some testing and found that it doesn't work with a win7 +IE9 (up to date updates) and also not on a win XP +IE8 (up to date updates), win XP +chrome (up to date updates).
And it works on a old image (virtual Pc) of WIN XP- IE6 (no up to date updates) and win XP(up to date updates) +firefox (older version) .
i tried to export the certificate using the xp-ie6 virtual pc. and import it else where, but that works within the lan. Over the WAN it's a " NO GO" . Is this a " Microsoft" or a " linksys/cisco" issue?
View 9 Replies
View Related
Jul 19, 2011
I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.
View 3 Replies
View Related
Feb 1, 2013
I am experiencing one, possibly two problems with the X3000, firmware release v1.0.03:
1. When enabling guest mode, the internal network is not accessible via WLAN even for clients NOT connected via guest mode but regularly: Even non-guests but regularly connected clients can't access any internal IP but the router itself. netscan shows only the very client's IP and the router's. Only after switching guest mode entirely off, regularly connected clients can access interal IP again. netscan correctly shows the whole network. Obviously a firmware bug. BTW: Clients connected via cable do not experience this problems.
2. I am not sure about this, but after using the firmware built in "Reboot" button, the router reboots correctly. But for some reason, it is instable afterwards. It is operational for a few seconds but then reboots again. It keeps cycling. I could stop it by switching the router off and on again.
View 6 Replies
View Related
Sep 6, 2011
I lost my installation CD and now I moved to a new place. I have linksys wireless-G router model-wrt54gs. how can i setup a new wireless now?
View 5 Replies
View Related
Mar 12, 2012
I have a Wireless-G broadband router WRT54GS and have figured out how to enable logging.This gives me the IP addresses, but I would like to be able to easily see the FQDN so I can see what my kids are looking at on the web.Is there a way to get that information via the built in logging feature?If not is there a way to take the log file and run this through sometype of program that will generate the FQDN's?
View 2 Replies
View Related
Apr 21, 2012
Sometimes the PC does not acquire the dns etc from the router and I have to manually enter in each PC to restore internet. - only W7.
View 2 Replies
View Related
Sep 29, 2008
how do i uninstall my linksys WRT54GS router? i just bought a netgear and i want to uninstall my wrt54gs router
View 9 Replies
View Related
Apr 16, 2013
I have a 2wire modem connected to the Internet port of my WRT54GS which is connected to a D link DSS 16+ Fast Ethernet switch. Without the switch, I can connect wired and wirelessly to my WRT54GS. However, when I put connect my any port of my D link switch to ports 1 - 5 of WRT54GS, I loose internet all together either wired/wireless to the router or wired to the D-link switch.I wonder why the IP Address will change as I understand that the switch is just a pass through switch.
View 1 Replies
View Related
Dec 21, 2011
I'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.
View 1 Replies
View Related
Feb 4, 2012
i have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
View 3 Replies
View Related
Oct 20, 2011
I have a WRT54GS v. 7.0 w/ the latest firmware. Im looking for ways to optimize the router for best performance.There are 4-5 iphones/ipads that will connect to it. 3-5 laptopsand one xboxNo wired connections.Im using COX internet on the west coast which provides good internet service. Im not an expert with networks or routers but i follow instructions real well. What can i do to my stock/default router to take 100% advantage of its capabilities?
View 2 Replies
View Related
Mar 25, 2007
I would like to upgrade the firmware for my WRT54GS V2.1 router however, I only see versions 1.0, 1.1, 2.0, 3.0, etc.. There is no 2.1 listed, so does this mean I can use the v2.0 firmware?
View 3 Replies
View Related
Dec 22, 2011
Factory default settings of my WRT54GS encryption are Disabled. When I try to enable WPA Personal encryption (>Wireless, Wireless Security), it reverts back to Disabled as soon as I make the selection. >Administration, >Wireless, >Encryption Function is Disabled.When I had this router set up at another location with another ISP, this was never an issue. How do I get the encryption function to be enabled?
View 4 Replies
View Related
Dec 25, 2012
I successfully cascaded a WRT54gs V6 router to a LinksKey wired router LAN to LAN. My concern is I get a warning on my one computer saying it is an unsecured connection. I have not seen a way to go in and make any kind of security settings. Most of the files on my main computer which is connected via the wired router are labeled as private files.
View 9 Replies
View Related
Oct 28, 2011
I've been having internet connection problems for the last few days and i usually do just unplugging the router and modem and turning it them back on but that hasnt been doing the job this time, its still connecting but it just says no internet access but it will connect when i connect my laptop to the modem. My router is linksys wrt54gs version 6.
View 6 Replies
View Related
Sep 12, 2011
Currently I have Verizon DSL and which supplied me with a Westell 7500 modem/wireless router. I am also connecting a Linksys WRT54GS (firmware Version: 7.2.08) to the Westell 7500.
When I connect via cable or wireless to Linksys WRT54GS I am not able to establish VPN connection. I get the error “Error 619: A connection to the remote computer could not be established. So the port used for this connection was closed”.
However, when I connect via cable or wireless to Westell 7500 I am able to connect to VPN.
I tried resetting the Linksys WRT54GS to factory settings and reconfigured but no success to VPN.
At work we have a Windows 2003 setup with VPN Role on it and on my laptop I am using the built in VPN connection within Windows 7.
View 3 Replies
View Related
Jul 11, 2011
So the power light on my WRT54GS router is off but my LAN lights 1-4 and the WLAN light stay on when power is attached but no cables are in the ports.
View 4 Replies
View Related
Jul 2, 2007
I need to reinstall my WRT54GS but can't find the original disk. Is there someplace I can d/l the install software? I can find the firmware updates but I think I need more than that to install the router.
View 8 Replies
View Related
Aug 12, 2011
I just got a new modem and was also hoping to boost the speed of my router without buying a new one. Are there any ways to increase the speed of the modem i already have?
View 2 Replies
View Related
Feb 21, 2012
I have a WRT54GS v1 router which is currently loaded with firmware version 2.07.1. I want to upgrade it with the latest firmware. Where I can find the latest firmware download for this model router? Linksys does not have it available on their site.
View 2 Replies
View Related
May 1, 2012
I first want to say I "think" I might be posting in the wrong forums for this question, but because I'm not really sure what the proper terminology for this is, I thought it best to ask here.
I have recently upgraded my router for my home network from an old Linksys WRT54GS G router, to a new E2500 N router. I have heard/read that it is possible to reconfiqure my old router to act as a range extender for my network but I am unclear how to do so. I think this may be the same thing as an access point, but all the FAQ's I've found seem to have this work as a solo device, not as a device on existing network. I have my e2500 setup with the modem in my study and broadcasting from there, and would like to use my old G router set up as a range extender to be located in the front living room area and picking up the network signal and rebroadcasting from there without a modem or computer attached.
View 1 Replies
View Related
Jul 8, 2011
I changed the router's IP to 192.168.2.1 due to the same situation as this [URL] linksys and now I can't access my settings I have tried the both pips and nothing and I can't seem to get my linksys wrt54gs v7.2 to let two computers be on the internet at the same time both can be on the network but on one on the internet
View 6 Replies
View Related
Sep 24, 2011
My router keeps going out, and the only thing that gets me back on is to unplug, replug, then I'm good but only for about 20 minutes.
View 2 Replies
View Related
Jul 12, 2011
I have a WRT54GS router. Desktop works fine and the laptop wireless connection worked fine until recently. Now I cannot connect to the router with the laptop. At times I can get to the access point, but can't get to the internet. But for the most part I cannot connect to the router at all.
View 4 Replies
View Related
Jun 8, 2011
How do I change the tcp timeout on a WRT54GS router v2 ?
View 4 Replies
View Related
Dec 12, 2012
How do I get my router to connect to roku.When I enter my router password in Roku it doesn't find the router. And when I use Cisco Network Magic, it doesn't find the Roku device.
View 8 Replies
View Related
Dec 4, 2011
I am trying to upgrade the firmware on my WRT54GS wireless router. I typed in 192.168.1.1 into the web browser and got to the setup menu but there is not much on the page. There are no menu options and just some of the information is on the page. None of the menu headers are listed. Is there any way to reset this so I can get the menu to work again?
View 6 Replies
View Related
