Linksys Wireless Router :: E4200 Disk Is No Longer Accessible

Jul 19, 2011

I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
 
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Iomega 1tb Disk Not Detected On E4200?

Oct 19, 2012

Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?

View 2 Replies View Related

Linksys Wireless Router :: E4200 USB Disk And Access Configuration

Jan 2, 2012

I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users.  I do have users configured in the Administration tab; these are what came per-configured on the router.

View 4 Replies View Related

Linksys Wireless Router :: E1000 And E4200 Not Accessible Via HTTPS

Feb 2, 2012

2 linksys routers a E1000 (fw v2.1.02) and a E4200 (fw v1.0.03) aren't accessable via HTTPS. Both via LAN https://router-ip and via wan https://isp-router-ip:8080 . Both routers are configured correctly (allready did a rerstore to fact. defaults. while having a chat with linksys live chat support). Everything without a result.
 
Ie9 doesn't accept the linksys/cisco certificate. after the first warning ie9 just sais that it's unable to show the page .
 
I did some testing and found that it doesn't work with a win7 +IE9 (up to date updates) and also not on a win XP +IE8 (up to date updates), win XP +chrome (up to date updates).
 
And it works on a old image (virtual Pc) of WIN XP- IE6 (no up to date updates) and win XP(up to date updates) +firefox (older version) .
 
i tried to export the certificate using the xp-ie6 virtual pc. and import it else where, but that works within the lan. Over the WAN it's a " NO GO" . Is this a " Microsoft"   or a " linksys/cisco"  issue?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Download To Hard Disk Capability?

Feb 8, 2012

I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wired Connections No Longer Work

Jul 14, 2011

I'm trying to fix the network at a student housing building and the system is kind of a mess.  We bought a new E4200 to replace our old Linksys router which no one knows the admin pw to.  We have four switches for 50 connections throughout the four story house and when switching the connections over to the new E4200 all of the wired connections no longer work.  Switch back to the old router and presto.  How do I need to change the settings with the E4200 to get it to work?
 
Also, as it's a thick old house the E4200's wireless only covers maybe half of it...I purchased two wireless repeaters to put on the 3rd and 4th floors, are these simple to install with the router?

View 4 Replies View Related

Linksys Wireless Router :: Firmware Upgrade E4200 Can No Longer Be Accessed

Oct 18, 2012

automatic firmware upgrade my E4200 can no longer be accessed.

View 6 Replies View Related

Linksys Wireless Router :: E4200 - USB Hard Drive No Longer Recognized After SW Update

Oct 15, 2011

I just updated Cisco software and my external hard drive is no longer recognized by Cisco.  It is a Seagate drive that is listed on the Cisco tested - passed - approved list.  It worked prior to this update.  I have disconnected the drive.  Reconnected it.  Rebooted.  Turned machine and router on and off and its still not recognized. 
 
Model name: Linksys E4200
Model number: E4200
Firmware version: 1.0.03 build 14
Operating system: Windows 7 SP 1
Software version: 1.4.11266.0
Connection type (WAN): DHCP

View 7 Replies View Related

Linksys Wireless Router :: E4200 - Laptop No Longer Connects To Preferred Network?

Jun 10, 2012

When starting my laptop it no longer connects to the preferred network. It has been trying to connect to my neighbors unsecured network. I have tried the netsh settings but it searches for another network and will not connect to the one it is supposed to unless I force it to.
  
E4200 connects to wrong network.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Users Can No Longer Access Mapped Drives

Dec 14, 2011

I have a file server running windows 2003 and five computers (1 windows 7, 4 windows xp-sp3).There are two shares on the server.When the router is setup with wpa2, three of the windows xp machines will have problems with mapped drives. Directly after the drives are mapped, everything works, but 10 or so hours later, users can no longer access these mapped drives and there is no way to reconnect them it seems.The other two machines (windows 7 and one windows xp machine) have no problems whatsoever.
 
The only thing that the three computers have in common is that they are also sharing a printer (an hp j4680) attached to one windows xp machine (not the server).If I set everything to wpa, everything works fine, but of course my wireless network speeds drop to 56mbps.

View 4 Replies View Related

Linksys Wireless Router :: E4200 No Longer Sees Iomega 1TB External Hard Drive?

Jan 26, 2012

I had an Iomega 1TB External Hard Drive connected to my E4200 router.  I had shares confgured and they were properly running on the network.
 
As of yesterday, this all stopped working. The router does not see the drive; it is as though it is not plugged in.
 
I rebooted the router and it still does not work.  I've connected the hard drive directly to my PC to verify that it works there, and it does. The router is running Ver.1.0.03 (Build 14) of firmware (the latest).

View 9 Replies View Related

D-Link D-ViewCam :: DCS-2132L No Longer Accessible - Port 80 Not Working

Mar 17, 2013

Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L  directly... I changed the port as a test..  Port 80 wasn't working originally.

[url]....

View 9 Replies View Related

Linksys Wired Router :: E4200 No Longer Accepts Wired Connections?

Oct 11, 2012

My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.

View 2 Replies View Related

Cisco Firewall :: 5505 - Bootnet Filter No Longer Functions After Disk Format

Jul 2, 2011

I was having major issues with a 5505 (too long a discussion to go into here) so I formatted the disk and uploaded fresh binaries and recreated my configuration. I noticed the licenses were preserved. I also noticed there were several fsck records after the format that were reclaiming lost chains. I suspect the flash on this ASA is going bad, since everytime it boots it says "reading from flash ..!!" like it cannot even read flash successfully. When I purchased this one new, it also had several fsck records being brand new. I'm going to open a case on these flash issues/questions.
 
Anyway, after all of the above, the only thing that is not working is the botnet filter. [code]

View 4 Replies View Related

Linksys Wireless Router :: WRT610Nv2 - Disk Management Tab

Sep 23, 2012

I plugged in a 2TB external USB drive and restarted the router.  The Disk Management tab appears blank, doesn't give option to format.

View 4 Replies View Related

Linksys Wireless Router :: E1200 Behind SonicWall Is Not Accessible

May 10, 2012

Here's what I have WAN->SonicWall->E1200 Basically the E1200 is given a static IP for it's WAN that is in the range of the Sonic Wall's DMZ interface, and the DMZ interface is the default gateway of the E1200.  When wireless clients connect to the E1200 they get internet access with no issues and they are on a separate network (which is intended).  The issue I have is if I get on a computer that is on the Sonic Wall's LAN network, which is able to route to the DMZ network, I am unable to ping the E1200 or perform remote management (turned on in the E1200).  There are phone devices that are on the DMZ network that I can ping from the LAN network.  I need to be able to remotely manage the E1200?

View 1 Replies View Related

Linksys Wireless Router :: WET54G V1.1 / Can't Find The Setup Disk

Jan 5, 2013

I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?

View 4 Replies View Related

Linksys Wireless Router :: Can Use Drobo As External Disk On WRT610N

Aug 7, 2011

I looked around on the forum here for info, but couldn't find anything.  I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page.  I have updated to the latest firmware.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GS Followed Instructions From Setup Disk

Feb 10, 2009

I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?

View 9 Replies View Related

Linksys Wireless Router :: WRT54GS Ver.6 - EBay Website Not Accessible

Jan 22, 2012

I am no longer able to access the "EBay" website while working on my wireless router. I have 3 personal computers, a laptop, 3 android smartphones & 2 ipod touch's. They all work fine, from my wireless router.I have the WRT54GS ver. 6.
 
The problem started with not being able to access EBay. I called the EBay people. Then, I called my local Internet Service Provider. There were at least 10 phone calls, to each. Then, I called the Linksys people. The lady told me that I had an outdated router and that I needed to get a new one. Well, I had previously bought the most expensive one I could get, said it was for "optimum" movie & gaming from Cisco.

View 9 Replies View Related

Linksys Wireless Router :: WRt610N Disk Storage File Format?

Mar 25, 2012

I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.

View 1 Replies View Related

Linksys Wireless Router :: X3000 FW V1.0.03 - Internal Network Not Accessible Via WLAN?

Feb 1, 2013

I am experiencing one, possibly two problems with the X3000, firmware release v1.0.03:
 
1. When enabling guest mode, the internal network is not accessible via WLAN even for clients NOT connected via guest mode but regularly: Even non-guests but regularly connected clients can't access any internal IP but the router itself. netscan shows only the very client's IP and the router's. Only after switching guest mode entirely off, regularly connected clients can access interal IP again. netscan correctly shows the whole network. Obviously a firmware bug. BTW: Clients connected via cable do not experience this problems.
 
2. I am not sure about this, but after using the firmware built in "Reboot" button, the router reboots correctly. But for some reason, it is instable afterwards. It is operational for a few seconds but then reboots again. It keeps cycling. I could stop it by switching the router off and on again.
 

View 6 Replies View Related

Linksys Wireless Router :: Downloaded Cisco Connect For E1200 V2 Disk Image

Feb 3, 2013

I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection.  Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
 
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
 
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
 
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
 
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.

View 6 Replies View Related

Linksys Wireless Router :: Ea6500 (fw 1.1.28.146856) Not Recognizing Maxtor OneTouch4 Disk

Feb 10, 2013

I bought an EA6500 router mid january. Firmware is 1.1.28.146856 from day 1 I used this new router. I attached my 750Gb Maxtor OneTouch 4 USB disk to it to share data over my network. I was able to define shares on it. Perfect. .. until I wanted to copy several GB's to this disk. It indicated it would take more than 1 day to finish this copy. So I removed this disc from the router (after removing it in the USB menu). I copied the data from my pc to the disc and attached it back to the router. From then on, it always indicates that no disc is present. Resetting the router did not work. Attaching a USB stick to the router does not cause a problem. It is visible and I can copy data to it. After attaching my Maxtor again, it shows no stations attached... (sharing a disk via the router was one of the reasons for buying this type)

View 2 Replies View Related

Linksys Wireless Router :: WRT400N Can No Longer Connect To Cat 5

Nov 18, 2011

Been having random connection drops for the past few weeks where I would see the network connections to the router just drop either on a wireless connection or a wired cat 5 connection. As of tonight I cant connect to the router at all. If I disconnect and reconnect the power after 30 seconds it will come up for a short time but then I will lose it again. linksys as my router is out of warrenty. I'v searched around for similiar problems people have been having, but it seems like mostly involve just the internet connection. I still have the same firmware for the routers as the day I purchased it and the router sits on my desk in a ventilated area not overheating. I can do to further diagnose the problem, I have even tried resetting to factory defaults. I try to diagnose the problem or see if my router is just dead.

View 3 Replies View Related

Linksys Wireless Router :: No Longer Getting Internet Over E2500?

Aug 25, 2011

My E2500 was working great for the past 3 months, and now it seems to be broken since I cannot access the internet anymore. I can connect to the router via wireless or wired at 192.168.1.1 and play with all the settings. On the status page, I have entries for Internet IP Address, Default Gateway, DNS1, and DNS2 as though I was connected fine to my DSL modem.If I connect my computer to my DSL modem then I can access the internet perfectly fine, so I know the modem is working. However, if I connect the E2500 to the modem, and then my macbook to the E2500 then I cannot access anything other than the router config pages. I have also tried, from the router admin page, to ping "www.yahoo.com" and "8.8.8.8" to no avail.
 
I have tried without success:

1. Renewing IP address from the router status page.

2. Cycling the power on the modem.

3. Rebooting the router.

4. Unplugging the power from both the modem and the router for 10 minutes and reconnecting it.

5. Resetting the router by holding down the reset button for 30s.

6. Using a different computer.

7. Turning off the firewall.

8. Reinstalling the firmware (1.0.01 build 3  May 6, 2011)

View 1 Replies View Related

Linksys Wireless Router :: WRT54GS V 5.0 No Longer Connects To Internet

Jul 17, 2006

My lap top and other desktop are able to detect the internet but not my main computer with this router.

View 2 Replies View Related

Linksys Wireless Router :: System No Longer Sees WRT54G

Dec 29, 2011

I mistakenly downloaded and installed version 4 firmware when i should have installed version 2.  My system (windows ver. 7) no longer sees the wireless router (WRT54G).  I no longer have the install CD and the version 2 firmware does not seem to be available on the website.  Is my router now dead in the water? 

View 1 Replies View Related

Linksys Wireless Router :: E1000 Computer No Longer Work

Nov 14, 2012

I bought a Linksys E1000 wireless router a year or so back. it was loaded onto a computer that no longer works. i have the router and the box but no disc or manual. My laptop and ipad are working fine with the router but i can't get my iphone hooked up and dont think i have the correct password. I dont have any software on my laptop to even figure it out. What can i do to get my phone to use the router?

View 1 Replies View Related

Linksys Wireless Router :: Dell V313w Can No Longer Print

Sep 19, 2012

After I had Prism high speed internet  installed (made by Cisco) and I can no longer print using my Dell V313s Wireless printer.  I have lost  the driver disc that came with the printer and Dell wants to charge me a large fee for support and Prism states that they are not responsible for the printer not talking to the computer.  

View 3 Replies View Related

Linksys Wireless Adapters :: WUSB54GS Can No Longer Connect To Router

Jul 7, 2008

I have had no problems with the WUSB54GS connecting to the WRT54GS up until last Friday...it can no longer connect to the router and reports that the network cannot be found.When i refresh the list of available networks i can "see" the router on the wireless PC but when an attempt to connect is made,it fails.OK,i rang up Linksys tech support today and we tried everything possible to work out what the problem was e:g uninstalling/reinstalling the software,updating the routers firmware,disabling security,trying all channels 1 thru 11,using WEP,using WPA,changing SSID name,using secure easy setup,using windows wireless configuration,changing USB leads nothing will make the device connect.

View 3 Replies View Related

Linksys Wireless Router :: Befw11s4 Can No Longer Access Router

Nov 25, 2011

I have a BEFW11S4 router when to put in password for the router and must have had a typo as I can no longer access router.Tried the factory reset on the rear of unit to no avail. Is their any way to get access as I have the main computer wire to the router. I need to get into the unit to move the channel number.

View 2 Replies View Related

Linksys Wireless Router :: Wrt320n Suddenly No Longer Allows Wifi Connection

Aug 5, 2011

I have had my router for at approx. a year and a half and it has worked flawlessly.  Now my PC which is plugged into the router still works fine, I'm just not able to connect wirelessly anymore.  I've tried the basic things like unplugging and rebooting, nothing changes.  The lights still say it is transmitting.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved