Linksys Wireless Router :: WRT610Nv2 - Disk Management Tab
Sep 23, 2012I plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT610Nv2 / All Of A Sudden Can't Get On Network With PDA
May 1, 2012I have one hardwired desktop to a WRT610Nv2 with 2 wireless desktops on the network. I used to be able to jump on and off with my PDA and Netbook......now I can't. PDA reports a "Ying-Yang" symbol along with the encryption symbol when locating the network....
View 2 Replies View RelatedLinksys Wireless Router :: WRT610Nv2 Setup From Scratch - Recovering Correct User Name?
Jul 26, 2012I'm trying to access the web setup page and I'm being asked for the user name and password. I have the password from the initial setup written down but apparently didn't also record the (changed) user name. It's not "admin" (tried that - and just leaving it blank - already).
Is there any way to recover the correct user name short of resetting the router and setting it up again from scratch?
Linksys Wireless Router :: WET54G V1.1 / Can't Find The Setup Disk
Jan 5, 2013I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?
View 4 Replies View RelatedLinksys Wireless Router :: Iomega 1tb Disk Not Detected On E4200?
Oct 19, 2012Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?
View 2 Replies View RelatedLinksys Wireless Router :: Can Use Drobo As External Disk On WRT610N
Aug 7, 2011I looked around on the forum here for info, but couldn't find anything. I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page. I have updated to the latest firmware.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 USB Disk And Access Configuration
Jan 2, 2012I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users. I do have users configured in the Administration tab; these are what came per-configured on the router.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54GS Followed Instructions From Setup Disk
Feb 10, 2009I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Disk Is No Longer Accessible
Jul 19, 2011I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.
Linksys Wireless Router :: E4200 Download To Hard Disk Capability?
Feb 8, 2012I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?
View 1 Replies View RelatedLinksys Wireless Router :: WRt610N Disk Storage File Format?
Mar 25, 2012I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.
View 1 Replies View RelatedLinksys Wireless Router :: Downloaded Cisco Connect For E1200 V2 Disk Image
Feb 3, 2013I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
Linksys Wireless Router :: Ea6500 (fw 1.1.28.146856) Not Recognizing Maxtor OneTouch4 Disk
Feb 10, 2013I bought an EA6500 router mid january. Firmware is 1.1.28.146856 from day 1 I used this new router. I attached my 750Gb Maxtor OneTouch 4 USB disk to it to share data over my network. I was able to define shares on it. Perfect. .. until I wanted to copy several GB's to this disk. It indicated it would take more than 1 day to finish this copy. So I removed this disc from the router (after removing it in the USB menu). I copied the data from my pc to the disc and attached it back to the router. From then on, it always indicates that no disc is present. Resetting the router did not work. Attaching a USB stick to the router does not cause a problem. It is visible and I can copy data to it. After attaching my Maxtor again, it shows no stations attached... (sharing a disk via the router was one of the reasons for buying this type)
View 2 Replies View RelatedLinksys Wired Router :: Lost Set-up Disk For WRT160N V3
Jul 19, 2012I've lost my set-up disk for my Linksys model WRT160N V3.
View 1 Replies View RelatedLinksys Wireless Router :: Way To Get E4200v2 Remote Management
Mar 30, 2012I have a small issue with Remote Management on my E4200v2.I have enabled it , select https and set Allowed Remote IP Address to any on the default port ( 8080 ).After all of this, I cannot connect to my router from my office or any other place. I'm using DDNS and all its ok ( updated at time ). I've tried also connecting to my direct ip address ( dynamic ) but with no result.P.S. no incoming log from port 443 using https.
View 3 Replies View RelatedLinksys Wireless Router :: Wrt160nl Management Via HTTPS
Mar 2, 2013I have an issue with new Win8 & IE10. When I try to access web management interface of my wrt160nl (Firmware Version: 1.00.01 B15) via HTTPS I'm receiving the foolowing message:"Continue to this website (not recommended)." If I click on it another error page appears:"Certification error: Navigation blocked. There is a problem with this website's security certificate"
At the same time I'm able to acccess the management interface via HTTPS, but from my laptop with Win7 & IE9. There if I click on the red Certificate Error > View certificate and the certificate information is:Issued by: Linksys Issued to: Linksys Valid from : 1.1.2009 to 1.1.2010
So I'd like to know if I could update the router certificate or what settings should I use in IE10 in order to access the web management interface via HTTPS?
Linksys Wireless Router :: How To Setup Remote Management On A E1200
Aug 25, 2012I want to be able to login to a router remotely and foward a port on the router. I thought i saw a spot for remote management but don't know how to use it. I have a dyn account and can create a dns for it.
i setup security dvrs on the internet so clients can see cameras from outside their homes. I would like to be able to login to a router if i need to foward a port or something similar.
Linksys Wireless Wmp54gs Pci Card Software Disk Is Lost
May 16, 2011my linksys wireless wmp54gs pci card software disk is lost how can i download software for computer for device to work
View 3 Replies View RelatedLinksys Wireless Router :: E1200 Management Mode And Faulty Setup
Aug 5, 2012I can not even get in to management mode. In next program that just keeps trying to auto repair the connection and never displays any radio button option the direction state like "advanced settings".At the very least your PDF should match your user friendly **bleep** ware!The instructions even refer to itself wrong! It states "for manual set up go use browser connection section" then in that section it describes an auto set up and instructs you to follow the set up steps on the CD.
View 7 Replies View RelatedLinksys Wireless Router :: WRT160NL Unable To Use Remote Management Over PPTP IP
Nov 20, 2011My University has free Internet at student homes, but we need to login by PPTP to get an official, public IPv4 and be able to reach the outside world. The network people at the University says that when the PPTP is up, everything should be open (no firewall of any kind).
have my WRT160NL that gets a 10.10.73.0/23 address from DHCP on WAN port. Currently I have 10.10.74.21. My internal network uses 172.17.17.0/24.My PPTP-server is located at 10.192.1.1 and when I connect, I usually get an IP in the 158.37.73.0/24-range. Currently I have 158.37.73.28. I use DynDNS to make sure I always know the public IP by the host binders.dyndns.info ...
So, I have Remote management enabled with HTTP and HTTPS, any IP and default port 8080. But no response from the outside world seems to go through.If I turn of the "filter ICMP" but keep the SPI Firewall on, I get ping reply from external sources towards my router, but still no HTTP or HTTPS response.I also have a Torrent I try to port forward to to be active, this is 23277, and this is the only thing that keeps coming up in the incoming log on my router.
It's not possible to connect to the routers management over the PPTP-tunnel?And why can't I get the port forward to work .. Same reason? PPTP 158.37.73.28 -> 172.17.17.100 (LAN) won't work?
Linksys Wireless Router :: E4200v2 Local Management Access Via Wifi
Jan 21, 2012I just found a slightly unsettling bug in the E4200v2 (running the latest firmware 2.0.36 build 126507).Administration > Local Management Access > Access via Wireless ... set to DISABLED. HOWEVER, when I attempted to access the web interface on a handy iPAD I had absolutely no problem getting through to the web interface (after providing username and passsword).Limiting access to wired clients seems like a simple a prudent measure ... which is why this option is there for the paranoid among us.This seems like a black-and-white bug.
View 9 Replies View RelatedLinksys Wireless Router :: Can't Access WRT610n Setup / Management Pages Wirelessly
Aug 23, 2011I cannot access the WRT610n setup/management pages wirelessly from my Macbook using safari. I can access the router via wireless from iPhone and PC and I can access it from the Macbook via ethernet cable.
When I try to access the router from the Macbook I just get "Contacting..." in the Safari status line and eventually it times out.
I can access the internet using Safari via WRT610n wireless. The only page I can't access is the router's management page.
Linksys Wireless Router :: Local Management For E2500 As Wifi Access Point
Jul 19, 2012I am using an E2500 as an access point, which is working fine. I have an Ethernet cable on one of the LAN ports of the E2500 connected to a LAN port on my gateway router. The LAN address of the E2500 is 192.168.7.3 and the LAN address of the gateway router is 192.168.7.1. Clients on the E2500 wireless network have no problems getting to the Internet through the gateway router. Clients on the E2500 wireless network can reach the E2500 local management port at 192.168.7.3 on port 80. On the gateway router I am forwarding WAN port 8083 to LAN address 192.168.7.3 at port 80. But I cannot access the E2500 local management interface via the gateway router. The E2500 should see the request as from 192.168.3.1 due to NAT in the gateway router, right? I can reach any of my actual access points this way, just not a router being used as an access point. Security/design limitation of the router?
View 2 Replies View RelatedLinksys Wireless Router :: EA4500 And HTTPS To Work For Local Or Remote Management
May 6, 2012How to get HTTPS to work for local or remote management? Selecting HTTPS for either local or remote doesn't enable HTTPS for me. It still use HTTP.
View 2 Replies View RelatedLost Setup Disk For Linksys Ae2500
May 31, 2012I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies View RelatedLinksys Cable / DSL :: How Much Hard Disk Does WAG200G Has
Jan 31, 2011Well, I am just curious, how much hard disk does a WAG200G has? And how much memory and what processor? Is it hard to point me to a datasheet including every chip or/and component it has?
View 3 Replies View RelatedLinksys Cable / DSL :: Connect 2 Hard Disk To Usb Port Of WAG320N?
Oct 14, 2011can i connect 2 hard disk to usb port of my WAG320N or one hard disk and one printer?
View 1 Replies View RelatedLinksys Cable / DSL :: Does X3000 Sees Both Disk In External Usb Enclosure With JBOD Disks
Feb 27, 2012Does X3000 sees both disk in an external usb enclosure with JBOD disks?
View 5 Replies View RelatedLinksys Wired Router :: RV042 - Remote Management Disabled But Interface Remotely Accessible
Feb 2, 2007We have a RV042. remote management is set to DISABLE - but even after restarting the router i can access the interface remotely over the internet.even when i enable it and change the port to say 5555 i can connect to the web interface using either port 5555 but ALSO on port 80.what's wrong here?the only way to stop that was to create a rule that blocks port 80 on the WAN interface. (btw. could this rule affect LAN users when browsing the web?)
View 7 Replies View RelatedLinksys Wireless Adapters :: WMP54GV4 Installation Via Hardware Management
Aug 20, 2007I used several of these wireless nick's in various systems. Installation was always done without using Te Linksys monitor. Just the installation of the driver via hardware management.
View 4 Replies View RelatedDlink Dir-655 Router - Unable To Run ATT Setup Disk
Jul 20, 2011I have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies View RelatedGet A Installation Disk For D-link Model Dir-601 Router?
May 29, 2012How do I install or get a installation disk for D-link model dir-601 Router
View 1 Replies View RelatedLinksys Wireless Adapters :: WUSB600N - Finding Power Save Management?
Jan 19, 2011After I installed on Win7 OS, I can't find the Power Save management of WUSB600N which on Windows XP I can see it in following path:Wireless Network Connection Status > Propeties > General > Configure > Advanced > Power Saving Mode. PS: I installed the newest version for Win7 OS.
View 3 Replies View Related