Linksys Wireless Router :: WET54G V1.1 / Can't Find The Setup Disk
Jan 5, 2013I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT54GS Followed Instructions From Setup Disk
Feb 10, 2009I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?
View 9 Replies View RelatedLinksys Wireless Router :: How To Install Wet54g Wifi Bridge
Oct 24, 2008I am trying to install a wireless bridge on my network. It is a Linksys WET54G v3 wireless bridge. I follow the instructions to configure the bridge: attach the antenna, plug the Ethernet cable into the bridge, plug the other end of the cable into the RJ-45 port of the hub (a Linksys WRT300N router), plug the power supply, insert the setup disk, and run the setup program. After following the steps, it came back and said it could not find a wireless bridge on my network. I tried just plugging the wireless bridge directly into the PC (as it was one of the alternatives in the instruction) Ethernet port. I got the same message. The set up on my wireless router is as follows, DSL modem connects into wireless router, and wireless router connects to PC Ethernet port. I am thinking, connecting the wireless bridge to one of the ports on the wireless router wouldn’t necessary allow the PC to know it is there, would it? Could it be that I don’t have a network? Does a wireless router form a hub?
View 9 Replies View RelatedLost Setup Disk For Linksys Ae2500
May 31, 2012I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies View RelatedLinksys Wireless Router :: EA6500 - Setup Could Not Find Signal?
Feb 2, 2013In first setup, error meaasge " we could not find your router :setup could not find your router's wireless signal ..." i checked cable and internet signal. i find one problem : the light of internet port of router is not blinking.i reset my router but problem is not solved.
View 5 Replies View RelatedLinksys Wireless Router :: Setup Program Can't Find EA2600?
Oct 26, 2012Trying to set up EA2600 Wireless Router. I follow instructions exactly re connecting cable modem to router. Setup program then searches for network, but at 25% completion it says it can't find the router.I've reset the router via button on bottom and retried setup procedure multiple times without success.
View 5 Replies View RelatedLinksys Wireless Router :: Setup Won't Find E3000 After Factory Reset
Nov 1, 2012My router wasn't giving out proper ip addresses so I went through the steps to reset the router to factory defaults. After I tried to run the setup off of the cd which came with the router and the program is saying it can't find my router
View 9 Replies View RelatedDlink Dir-655 Router - Unable To Run ATT Setup Disk
Jul 20, 2011I have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies View RelatedWireless :: Lost The Setup Disk - Can't Remember The Wpa
Mar 25, 2011windows xp trying to setup wireless network in home.i dont know what my wpa key.
View 1 Replies View RelatedWireless :: HP 7410 Printer - No Factory Setup Disk
Aug 13, 2012With converting my hp 7410 printer to wireless. It has wireless capability but i do not have the factory setup disk. What can i do?
View 1 Replies View RelatedLinksys Access Point :: How To Enable Channel 13 On WET54g
Jun 30, 2012I am using it in Europe and need to enable channel 13 so I can connect to a network on this channel. I vaguely remember being told this was done by accessing a hidden setup page. how to enable channel 13 on a WET54g V3.1?
View 9 Replies View RelatedLinksys Wireless Router :: WRT610Nv2 - Disk Management Tab
Sep 23, 2012I plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies View RelatedLinksys Wireless Router :: Iomega 1tb Disk Not Detected On E4200?
Oct 19, 2012Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?
View 2 Replies View RelatedLinksys Wireless Router :: Can Use Drobo As External Disk On WRT610N
Aug 7, 2011I looked around on the forum here for info, but couldn't find anything. I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page. I have updated to the latest firmware.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 USB Disk And Access Configuration
Jan 2, 2012I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users. I do have users configured in the Administration tab; these are what came per-configured on the router.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 Disk Is No Longer Accessible
Jul 19, 2011I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.
Linksys Wireless Router :: E4200 Download To Hard Disk Capability?
Feb 8, 2012I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?
View 1 Replies View RelatedLinksys Wireless Router :: WRt610N Disk Storage File Format?
Mar 25, 2012I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.
View 1 Replies View RelatedLinksys Wireless Router :: Downloaded Cisco Connect For E1200 V2 Disk Image
Feb 3, 2013I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
Linksys Wireless Router :: Ea6500 (fw 1.1.28.146856) Not Recognizing Maxtor OneTouch4 Disk
Feb 10, 2013I bought an EA6500 router mid january. Firmware is 1.1.28.146856 from day 1 I used this new router. I attached my 750Gb Maxtor OneTouch 4 USB disk to it to share data over my network. I was able to define shares on it. Perfect. .. until I wanted to copy several GB's to this disk. It indicated it would take more than 1 day to finish this copy. So I removed this disc from the router (after removing it in the USB menu). I copied the data from my pc to the disc and attached it back to the router. From then on, it always indicates that no disc is present. Resetting the router did not work. Attaching a USB stick to the router does not cause a problem. It is visible and I can copy data to it. After attaching my Maxtor again, it shows no stations attached... (sharing a disk via the router was one of the reasons for buying this type)
View 2 Replies View RelatedCan't Access Internet Without Setup Disk
May 3, 2011i can't access the internet without the internet setup disk.I don't have it anymore does anyone have a spare
View 19 Replies View RelatedLinksys Wired Router :: Lost Set-up Disk For WRT160N V3
Jul 19, 2012I've lost my set-up disk for my Linksys model WRT160N V3.
View 1 Replies View RelatedWet54g Won't Connect To The Web
Sep 16, 2011I am trying to connect dtv hd/dvr hr20 to the internet. I have a linksys wet54g bridge which is configured on my wireless net work, it is connected to the hr20 via Ethernet. I manually set the ip,subnet, gateway and the dns. when I try to connect the receiver everything comes up okay, network says network connected, but no internet. I am receiving error message 22. I noticed no lights blinking on the bridge or the wtg54g router.I did a receiver reboot, and and hooked a lap top to the wet54 via the ethernet port, same hook up as the hr20 with the same results, very good strong signal to the network, but unable to access the internet. I set up the wet54g again using the ip address the router assigned 192.168.1.226, the subnet mask at 255 255 255 0, and the gateway and dns at 192.168.1.254. Which all are all the same as the other computers in the network. Still no success connecting to net.
View 1 Replies View RelatedLinksys Wireless Wmp54gs Pci Card Software Disk Is Lost
May 16, 2011my linksys wireless wmp54gs pci card software disk is lost how can i download software for computer for device to work
View 3 Replies View RelatedFind Network Security Key After Router Already Setup?
Aug 28, 2011How do I Find network security key after router already set up
View 1 Replies View RelatedFind Network Security Key After Router Already Setup
Dec 22, 2012Find network security key after router already setup
View 2 Replies View RelatedCisco Routers :: SRP527W - Setup - Cannot Find Web Console To Setup
Jan 1, 2012I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies View RelatedChange Router Setup So Tablet Can Find IP Address?
Apr 27, 2012Le Pan 2 tablet keeps trying to "obtain IP address." I have a dlink 655 router. I've removed the password from the router. Rarely will the tablet connect.
View 1 Replies View RelatedFind Password For My Linksys Wireless Router?
Jul 31, 2011Is there a way for me to find the password for my linksys wireless router so I can use the Wi-Fi on my iPhone at home?
View 1 Replies View RelatedFind Security Key For Linksys Wireless Router?
Oct 13, 2011How do I find my Linksys wireless router security key?
View 1 Replies View RelatedLinksys Wireless Router :: Can't Find CD For WRT54g
Jul 30, 2006I can not find the CD for my WRT54g router. Is there any place to download the setup info?
View 9 Replies View RelatedLinksys Wireless Router :: E2000 - How To Find WPA Key
Oct 2, 2011We bought our Linksys E2000 in the summer and went to set it up but something came up... Now we are trying to set it up but cannot find our WPA key... Where can we find this?
View 2 Replies View RelatedLinksys Wireless Router :: WRT150N - Where To Find WPA Key
Nov 26, 2007I'm trying to setup Xbox live for my Xbox 360. I have the WRT150N wireless router and just got the wireless adapter that plugs into the 360. It said the adapter couldnt pick up the signal then i realized i needed to enter the WPA key from my wireless router. I checked the information on the router and it only gives me the serial number and MAC address. How I can find out what the WPA key is for the router??
View 5 Replies View Related