Linksys Wireless Wmp54gs Pci Card Software Disk Is Lost

May 16, 2011

my linksys wireless wmp54gs pci card software disk is lost how can i download software for computer for device to work

View 3 Replies


ADVERTISEMENT

Lost Setup Disk For Linksys Ae2500

May 31, 2012

I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?

View 1 Replies View Related

Linksys Wired Router :: Lost Set-up Disk For WRT160N V3

Jul 19, 2012

I've lost my set-up disk for my Linksys model WRT160N V3.

View 1 Replies View Related

Wireless :: Lost The Setup Disk - Can't Remember The Wpa

Mar 25, 2011

windows xp trying to setup wireless network in home.i dont know what my wpa key.

View 1 Replies View Related

Linksys Wireless G Model WMP54GS Not Connects To The Internet

Feb 5, 2012

I just did a fresh Windows XP install on my desktop. I've been trying the past couple of days to get it to connect and it has randomly connected online sometimes but most of the time it won't connect. The times it has connected to the internet it has been fine, but then it will disconnect and won't reconnect.

View 13 Replies View Related

Linksys Wireless Adapters :: Newly Reinstalled XP (sp2) Not Seeing WMP54GS?

Apr 4, 2011

 I have a WMP54GS Installed in a SONY VAIO with a Pentium 4 2.6 ghz processor, 2 gb of DDR Ram, and Just over 60 GB of Hard Drive space. I've run this setup for over two years at this point, all on an XP operating System, from sp1 all the way up to sp3 with no issues. A week ago I ended up with a trojan on my system, and had to do a full recovery. This time I used an XP Pro copy that came with sp2. Not the same copy of XP that had been running previously.  Needless to say when I had the OS finally installed and running, it didn't recognise my wireless adapter. I figured I needed to run through the same process as I had when I first purchased the adapter, and took the card out, ran the intsallation disc, followed the intructions, powered off, and reinserted the card. When I booted back up, there was simply a gray box in the lower left showing "disabled". I clicked on it, and it showed that there were no networks in range, when there should have been several. The only tab on the screen that I was able to click was "exit". I wasn't able to perform manual setup, and when I clicked the "xp setup" option, nothing happened. I was unable to find the device in the device manager (though it may be in the "other devices" list with a question mark, but I can't tell. Would it be something like "network controller" or "ethernet device"?) It doesn't  appear in my network connections either. The LED on the card itself is dormant. Nothing happening. I figured at this point that it must not be fastened adequatly to the PCI slot. So I opened the case, took the card out, and fastened it back in nice in tight. No more give, and in the same slot it had always been in when operating properly. Still the same issue. I've done this a couple more times now, and with the same results. I just don't get it. I've followed the intrsuctions to the letter, and no results. Do I perhaps need to skip the cd and try to install the latest drivers for the card instead? Will that allow my PC to recognise it? I have another machine in my home, and can download a driver and transfer it by disc or flash drive to the other machine if need be.

View 1 Replies View Related

Linksys Wireless Adapters :: Driver Download For WMP54GS?

Oct 28, 2006

Due to me losing the install CD for this card in a recent move, I am trying to download this driver from the LinkSys site and the process never starts, i.e. the download dialogue box comes up and I choose "save" because I need to sneaker-net the thing to another PC in the house.

View 3 Replies View Related

Linksys Wireless Adapters :: WMP54GS Setup Cannot Decompress

Mar 16, 2013

I downloaded the drivers for the WMP54GS and I found the file "ikernel.ex_"  is compressed in a format for CAB file extraction and decompression methods. It therefore cause the installation and Setup of Linksys drivers to fail because setup cannot decompress "ikernel.ex_".  It was not compressed with Winzip's self extractor utility originally in the download package. The file was compressed in a Microsoft specific compression method for CAB archives, and surprisingly still an old DOS based compression method.
 
Linksys/CISCO has deliberately tampered with the download installers in an effort to force users to pay for out of warranty installation support. I might be further surprised that manual installation methods via device manager or update driver haven't been deleted from support pages forcing even more telephone calls to tech support.

View 1 Replies View Related

Linksys Wireless Adapters :: WMP54GS / Windows Cannot Find Any Additional Networks

Apr 22, 2009

So I recently took the WMP54GS ver 1.1 wireless adapter out of my old XP computer and put it in my new Vista 64bit computer.  I successfully installed the adapter, downloaded the drivers (WMP54GS-v1.1_v4.102.15.53_Vista_dr), and unzipped them on my C drive to their Linksys Driver folder.  When I go to find available networks it says "Windows cannot find any additional networks," and when I try to set up a wireless network it shows a blank window and says "an unexpected error has occurred."  I can see the adapter in the device manager, so it obviously installed correctly.

View 5 Replies View Related

Linksys Wireless Adapters :: WMP54GS / Finding Driver For Windows 7 (64Bit)

Feb 26, 2010

I have the above mentioned WMP54GS.  And I just got a Windows 7 capable computer and got it installed.  Now I can't find a driver that will work at all.  Other than the Broadcom drivers that Windows installs naturally.  (The Broadcom drivers are terrible.  I play World of Warcraft and when before on my old Vista 64-Bit system I would get around 50 to 60 MS I now get 180 to 200. ) How to get this to work. 

View 9 Replies View Related

Dell :: Inspiron 1545 - Lost Driver Reinstall Disk

Jun 16, 2012

I have a dell Inspiron 1545, and I recently had to re-install windows Vista(SP2) onto it because of a Trojan that snuck its way onto my hard drive I only had the Installation disc for the OS, and I'd lost the driver re-install disk. I went onto the Dell website and found all the required drivers for my computer. (I used my exact service tag and express code), I downloaded all of the drivers and ran them, and everything seemed to be working fine. Shortly after re-installing all of the drivers, I noticed that I could not connect to the internet through my wireless connection. I've tried all the keyboard shortcuts to "turn on" my wireless connectivity, I've tried installing a whole number of  recommended wireless card drivers, and to no avail. This is a serious problem to me, as I am very active on the internet. My Ethernet connection works fine, (that's how I'm online posting this right now), my wireless card troubles.

View 1 Replies View Related

Lost Wireless After Installed Video Card

Oct 25, 2011

I am using a Dell XPS 420 computer running Vista. My wireless network has worked fine until now. I had my video/graphics card go bad and installed a new one (ATI Radeon 4350). That fixed the video problem but since then I have not been able to connect to my home wireless network. Windows suggested that I may have a hardware problem with my network adapter so I replaced it with a new Linksys AE 1200 USB adapter.The device manager says it is working properly but it does not pick up the wireless network says no networks available.The old computer sitting next to it picks up the network fine. I have reinstalled the adapter several times with no effect. When I click on the wireless network icon and ask it to diagnose the problem it says that 1) the network adapter has a driver or hardware problem (device manager says its working properly) and 2) to make sure that the Internet Protocol Bindings are proper and to make sure that Internet Protocol Version 4 and Internet Protocol Version 6 are selected (those protocols are selected).

View 1 Replies View Related

Dell XPS 420 Lost Wireless After Installed Video Card?

Oct 25, 2011

I am using a Dell XPS 420 computer running Vista. My wireless network has worked fine until now. I had my video/graphics card go bad and installed a new one (ATI Radeon 4350). That fixed the video problem but since then I have not been able to connect to my home wireless network. Windows suggested that I may have a hardware problem with my network adapter so I replaced it with a new Linksys AE 1200 USB adapter. The device manager says it is working properly but it does not pick up the wireless network�says no networks available. The old computer sitting next to it picks up the network fine. I have reinstalled the adapter several times with no effect. When I click on the wireless network icon and ask it to diagnose the problem it says that 1) the network adapter has a driver or hardware problem (device manager says its working properly) and 2) to make sure that the Internet Protocol Bindings are proper and to make sure that Internet Protocol Version 4 and Internet Protocol Version 6 are selected (those two protocols are selected).

View 1 Replies View Related

Linksys Wireless Router :: WRT610Nv2 - Disk Management Tab

Sep 23, 2012

I plugged in a 2TB external USB drive and restarted the router.  The Disk Management tab appears blank, doesn't give option to format.

View 4 Replies View Related

Linksys Wireless Router :: WET54G V1.1 / Can't Find The Setup Disk

Jan 5, 2013

I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?

View 4 Replies View Related

Linksys Wireless Router :: Iomega 1tb Disk Not Detected On E4200?

Oct 19, 2012

Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?

View 2 Replies View Related

Linksys Wireless Router :: Can Use Drobo As External Disk On WRT610N

Aug 7, 2011

I looked around on the forum here for info, but couldn't find anything.  I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page.  I have updated to the latest firmware.

View 4 Replies View Related

Linksys Wireless Router :: E4200 USB Disk And Access Configuration

Jan 2, 2012

I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users.  I do have users configured in the Administration tab; these are what came per-configured on the router.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GS Followed Instructions From Setup Disk

Feb 10, 2009

I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Disk Is No Longer Accessible

Jul 19, 2011

I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
 
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Download To Hard Disk Capability?

Feb 8, 2012

I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?

View 1 Replies View Related

Linksys Wireless Router :: WRt610N Disk Storage File Format?

Mar 25, 2012

I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.

View 1 Replies View Related

Linksys Wireless Router :: Downloaded Cisco Connect For E1200 V2 Disk Image

Feb 3, 2013

I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection.  Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
 
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
 
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
 
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
 
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.

View 6 Replies View Related

Linksys Wireless Router :: Ea6500 (fw 1.1.28.146856) Not Recognizing Maxtor OneTouch4 Disk

Feb 10, 2013

I bought an EA6500 router mid january. Firmware is 1.1.28.146856 from day 1 I used this new router. I attached my 750Gb Maxtor OneTouch 4 USB disk to it to share data over my network. I was able to define shares on it. Perfect. .. until I wanted to copy several GB's to this disk. It indicated it would take more than 1 day to finish this copy. So I removed this disc from the router (after removing it in the USB menu). I copied the data from my pc to the disc and attached it back to the router. From then on, it always indicates that no disc is present. Resetting the router did not work. Attaching a USB stick to the router does not cause a problem. It is visible and I can copy data to it. After attaching my Maxtor again, it shows no stations attached... (sharing a disk via the router was one of the reasons for buying this type)

View 2 Replies View Related

Linksys Cable / DSL :: How Much Hard Disk Does WAG200G Has

Jan 31, 2011

Well, I am just curious, how much hard disk does a WAG200G has? And how much memory and what processor? Is it hard to point me to a datasheet including every chip or/and component it has?

View 3 Replies View Related

Linksys Cable / DSL :: Connect 2 Hard Disk To Usb Port Of WAG320N?

Oct 14, 2011

can i connect 2 hard disk to usb port of my WAG320N or one hard disk and one printer?

View 1 Replies View Related

Linksys Cable / DSL :: Does X3000 Sees Both Disk In External Usb Enclosure With JBOD Disks

Feb 27, 2012

Does X3000 sees both disk in an external usb enclosure with JBOD disks?

View 5 Replies View Related

Linksys Wireless Router Have Lost WEP Key

Feb 22, 2012

We have a Linksys wireless router and have lost the WEP KEY. How can we determine what it is?

View 1 Replies View Related

Lost CD For Linksys WRT54G Wireless Router?

Dec 24, 2011

I have lost the start-up cd for my router, where to find a downloadable one so i can hook up my router.

View 1 Replies View Related

Linksys Wireless Router :: Lost CD Of WRT54gs?

Sep 6, 2011

I lost my installation CD and now I moved to a new place. I have linksys wireless-G router model-wrt54gs. how can i setup a new wireless now?

View 5 Replies View Related

Linksys Wireless Adapters :: Lost CD For Wusb54gc Ver 3?

Mar 8, 2011

i tried down loading drivers but computer still says needs cd.

View 4 Replies View Related

Linksys Wireless Router :: Lost It On WRT54G2

Aug 12, 2010

I have been having trouble with my wireless router for the past month and not sure what is up with it. I have recently moved and got it working for a day then the wireless did not work and i was not able to access the setup webpage either. What I ended up doing was upgrade the firmware to the newest one and it worked well for about 2 weeks but then started again and the only way it works is to reboot the router but then the next day it will not work.

View 3 Replies View Related

Linksys Wireless Router :: Lost Cd For E3000?

Aug 17, 2012

I lost my cd for my router e3000 any way still to use it?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved