Lost Wireless After Installed Video Card
Oct 25, 2011
I am using a Dell XPS 420 computer running Vista. My wireless network has worked fine until now. I had my video/graphics card go bad and installed a new one (ATI Radeon 4350). That fixed the video problem but since then I have not been able to connect to my home wireless network. Windows suggested that I may have a hardware problem with my network adapter so I replaced it with a new Linksys AE 1200 USB adapter.The device manager says it is working properly but it does not pick up the wireless network says no networks available.The old computer sitting next to it picks up the network fine. I have reinstalled the adapter several times with no effect. When I click on the wireless network icon and ask it to diagnose the problem it says that 1) the network adapter has a driver or hardware problem (device manager says its working properly) and 2) to make sure that the Internet Protocol Bindings are proper and to make sure that Internet Protocol Version 4 and Internet Protocol Version 6 are selected (those protocols are selected).
View 1 Replies
ADVERTISEMENT
Oct 25, 2011
I am using a Dell XPS 420 computer running Vista. My wireless network has worked fine until now. I had my video/graphics card go bad and installed a new one (ATI Radeon 4350). That fixed the video problem but since then I have not been able to connect to my home wireless network. Windows suggested that I may have a hardware problem with my network adapter so I replaced it with a new Linksys AE 1200 USB adapter. The device manager says it is working properly but it does not pick up the wireless network�says no networks available. The old computer sitting next to it picks up the network fine. I have reinstalled the adapter several times with no effect. When I click on the wireless network icon and ask it to diagnose the problem it says that 1) the network adapter has a driver or hardware problem (device manager says its working properly) and 2) to make sure that the Internet Protocol Bindings are proper and to make sure that Internet Protocol Version 4 and Internet Protocol Version 6 are selected (those two protocols are selected).
View 1 Replies
View Related
Sep 14, 2012
I'm off to university on Monday but I couldn't afford a laptop (I have a huge Dell gaming desktop!) so my awesome parents gave me their little Acer Aspire One D260-A netbook; Intel Atom Processor N450 (1.66GHz, 512K), 1GB, 160GB HDD. It's a couple of years old, was running XP and literally everything was broken - no sound, no backlight, faulty touchpad etc. - so first port of call was a clean install of Windows 7 and updating every driver (and BIOS) off the Acer website from a USB.Problem is, everything is running like a dream... except for the wireless. When I tried to install the latest Atheros drivers (doing all of this from a USB due to lack of connectivity) I received a Code 10: driver cannot start error, so after some troubleshooting I was pointed towards different drivers, only for Windows to inform me that it can't find the hardware.
Looking in devices, I'm seeing an Atheros Ethernet connection device but the wireless card seems to have taken a walk. Xirrus isn't seeing anything either. My current internet is between Virgin and BT (mine and my partner's house) but we move in together on Monday and we'll be setting up Sky, so I can't give you much information on internet. I do have an ethernet cable I can plug into our Virgin wifi home router (D-Link DSL-2640R Broadband Wireless G ADSL2+) if need be. One of my main problems seems to be finding the correct drivers as due to the wireless card disappearing, I'm not sure how to tell what the wireless hardware actually is.
Here are the finer details:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CJ-Netbook
Primary Dns Suffix . . . . . . . :
[code]....
View 11 Replies
View Related
Sep 7, 2012
I am wanting to move an existing wireless LAN PCI 802.11 b/g adapter WN5301A card from another tower computer into my Optiplex 755 mintower. Is this compatible, or do I need to get a different wireless card?
View 2 Replies
View Related
Dec 18, 2011
I have a Cisco 881W that will no longer boot/operate properly if the internal radio card is installed. If the card is installed, all I get is the following...
System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 2009 by cisco Systems, Inc
[Code]....
if I do a dev I get nothing. If I do a dir flash: I get "bad device name". My cookie shows FF in all positions.
If I remove the entire WiFi Radio card (both boards), then It boots fine, cookie appears intact, devs appear, IOS loads, just without the WAP.
Any chance this is a matter of a file getting deleted or corrupted or is this certainly bad hardware? The router sans Wifi appears fully functional.
View 2 Replies
View Related
Aug 3, 2011
So I just finished installing ClearOS and configuring my network, but I can't figure out how to get it to boot without the video card. It's currently running with a 4870, but I want to take it out for the power savings.My motherboard is an ASUS P5Q-E and I haven't really found any information on how to do this or if it is even possible
View 12 Replies
View Related
May 16, 2011
my linksys wireless wmp54gs pci card software disk is lost how can i download software for computer for device to work
View 3 Replies
View Related
Jun 12, 2012
I've been having some problems with my Ethernet connection lately.The problem started early last week. I'm currently relocating, so I unplugged my laptop from the Ethernet connection I had at my old place.At two different locales, I have tried to use an Ethernet connection in order to get better speed (the wireless at the first locale was non-existent and at the second it is extremely slow in my room). I have done so with two separate cables that I have tested on others' computers and found that they are perfectly fine. That, of course, leads me to believe that it is my computer and is either a hardware or software problem (here's hoping it's the latter).Anyway, my laptop is a Dell Inspiron 1720 (purchased in 2006). About a year ago, I updated to Windows 7 from the pre-installed Vista. Never had any problems (as I said, everything was fine up until about a week ago). The installed card is a Broadcom 440x 10/100 Integrated Controller. Everything under Device Manager indicates that the hardware is working properly and has all of its drivers installed, but nothing is working.I have tried to uninstall and re-install the drivers (albeit by allowing windows to find them automatically), but the result is the exact same.I have checked the port and found that there is no debris or obstructions. My computer hasn't been dropped or mishandled in any way.
View 13 Replies
View Related
Oct 25, 2011
I can't get the Video to record to the SD card, nothing happens. Snapshots record fine.
Firmware is 1.01
View 14 Replies
View Related
Dec 21, 2011
I have a Cisco 3745 Router with 1 Subrate T3/E3 port card installed on it. We want to add another T3/E3 card,
Q1- Can i add another card in this model? Q2- Can we multilink bundle up two T3/E3 cards? (current we have a single DS3 P2P connection between two office, so want to increase the bandwidth)
View 4 Replies
View Related
May 22, 2012
i reinstalled Windows Vista using the disc that came with the Dell Inspiron 1525.I then went to the dell website, downloaded and installed the 2 network drivers. So now the internet works with a cable but the network card is still not showing up.How is the laptop still not recognising the wireless card? Are there any additional drivers i need?
View 14 Replies
View Related
Apr 7, 2013
My daughter bought a Dell Optiplex 745c from a company who is replacing their cmputers. This particdular computer does not have any drivers loaded for the installed NIC card, so te machine will not talk to the intenet. Are the drivers in the 745 and the 755 the same?
View 1 Replies
View Related
Apr 20, 2012
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies
View Related
Jan 3, 2013
Just got a new HD Smart TV and trying to stream Netflix and Youtube. Netflix works decent most of the time, buffering occasionally but Youtube buffers all the time and is not watchable. Using a Netgear WGT624 b/g router located some 60 feet away a half floor upstairs. Internet downstream speed is about 5.5 Mbps on the hard wired main computer and laptops show the same speed when connected wirelessly. Wireless Network Connection Status on a laptop close to the TV show "Very Good to Good" signal strength and Speed at 11 Mbps. Why is the Yotube connection so poor on the TV? The Netflix could be better too. Laptop by the TV streams Neflix and Yotube fine but of course that is not HD. Do I need an upgraded router or powerline network adapter?
View 1 Replies
View Related
Jan 28, 2013
So my router is in a place where it cannot be moved as i have an old house which has small hallways and one central living room way the hell out in the boondocks relatively speaking. my brother just recently added a belkin dual band range extender to his room and i know it will be terrible for online gaming..is there an access point or range extender that i can use to hard wire my xbox 360 into that will still give me somewhat wired performance?
View 1 Replies
View Related
Mar 24, 2011
I need to transfer live video and if possible video from station A to station B over wireless network. So what are the hardware requirements and setup cost...
Secondly how should i connect my CCTv cameras atleast 5 to computer's webcam so that i can transfer video over internet.
View 1 Replies
View Related
Jun 13, 2012
I want to install 2 wireless routers for the same home network. I want to know if I need 2 modems to go with the 2 routers or if I only need one. the routers will be placed in different locations in the house.
View 1 Replies
View Related
Aug 18, 2011
I have my wireless connection set up and everytime I open a video file, my wireless connection disconnects and then re-connects after 30 odd seconds. It also happens when trying to stream video through Veetle or Sopcast. I have spent hours on google trying to find the solution to this and can't find anything. I have tried switching my firewall off, changing tons of settings of my wireless connection. I also updated my Broadcom wireless driver to the most recent one.
View 3 Replies
View Related
Nov 8, 2011
Using as AP. Last Tuesday in the middle of a Netflix movie the video stopped. Now the wireless portion of the DAP-1522 refuses to pass any type of video. Everything else works (email, Google, Facebook, etc.). I can get to Netflix, Youtube, Yahoo, etc. .....but none of them will pass video.
Using a direct wired connection to the DAP-1522 everything works. Netflix, Youtube, etc.
Download speed checks at 17.74mbps.
View 11 Replies
View Related
Sep 21, 2010
I have the WAP4410n connected to a SLM2008. I tried to change to 100Mb the port in the switch but then I lost the connectivity.
But it's a giga port and it must work as a giga port. The new firmware must resolve the problem, and not to be a work around. Or what will be the next, not to use N, only G, or only 20MHz or...
I need the WAP4410n for streaming audio and video?
View 1 Replies
View Related
May 7, 2011
Every time opening up Windows 7 a box of the message popping up in the middle of the screen, saying,'Failed to run service'. After two or second later, connection is completed as seeing '5 bars' at the right bottom corner of Win. 7.Afterward, upon clicking to open 'Home Page,' another message popping-up in the middle of the screen,'Check online for a solution and close the Program' Clicked 'OK' and a box of message disappeared and connection is very fast as if nothing is amiss.I think that 'Smart Wizard' or something that came with Netgear Adapter doing this.
View 3 Replies
View Related
Feb 21, 2013
I have Cisco AIR-SAP2602I-E-K9 Implemented and connected to PoE Switch but the users trying to conenct this AP don't get IP Address.
Dot11Radio0 is up and Dot11Radio1 is down. SSID are created fine.
Subinterfaces for Agilec0nnect and Agilec0nnect1 is also there on Radio0 and are up.3 There is no output for 'sh dot11 association'
View 2 Replies
View Related
Sep 6, 2012
My computer is a HP Laptop Model Number DV2815EA running windows vista 32 bit. Its a few years old. Recently i have had problems with my wireless adapter turning itself off whenever i watch videos online. It doesn't happen all the time, but if i am watching something for more than an hour it will cut off. There is a blue light and a switch on the front of the laptop, and when the wireless adapter is off, the light changes to red.
The light will change to red sometimes whilst watching video, and the only way i can turn the wireless back on is if i restart the system. Even if i activate and disable the wireless adapter using the external manual switch, or the internal controls using the wireless assistant. Also, not sure if this is relevant but i can no longer either watch videos on full screen as the image gets jolty.
Things i have tried:
1) restoring the system to a previous restore point - i tried this but for some reason the only restore points i could find were ones dated after i started noticing the problem.
2) reinstalling the wireless adapter driver and video card driver.
3) running a full 6 hour antivirus scan - I am using Eset NOD32 antivirus and also i scanned using comodo cleaning essentials.
View 9 Replies
View Related
Dec 22, 2012
I am attempting to connect a video streaming device to my wireless network and it will not accept what I think is the password
View 1 Replies
View Related
Jan 30, 2012
How do i must to set QoS for optimal streaming HD Video (from NAS to Media player)? Here is E3000 QoS options:
View 1 Replies
View Related
Jan 20, 2013
Just bought a EA4500. When I go on Youtube, no videos are playing. All I see is the loading animation and nothing happen. I have 4 computers, 2 tablets, an iPod, a blackberry. None of them are playing the videos. Before, I had a Dlink router and everthing was good.
View 3 Replies
View Related
Aug 28, 2012
I have an E1000 and the other day for the first time in quite a while I opened the Cisco software. It said there was an update so I went ahead and installed it. Since then streaming video has seemed choppy and thebuffer keeps needing to reload, even Netflix. Could there be anything in the update that would have changed things? The video played with no issues before. Another question, if a computer is using a direct, wired connection to the router, is that a straight connection from the modem or is the signal still sent through the modem hardware/software?
View 5 Replies
View Related
Jan 8, 2012
I have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
View 6 Replies
View Related
Nov 11, 2012
I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop playing waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV?
View 9 Replies
View Related
May 22, 2011
I have a notebook that has had wireless installed on it. Other laptops can connect without ethernet cable..but notebook needs it. My carrier has done what they can...but insist there is a program installed on notebook that blocks the wireless signal.
View 2 Replies
View Related
Sep 5, 2011
I have just reformatted my Fujitsu A6120 lifebook laptop and I downloaded all the drivers and everything installed fine except for the Intel PRO/Wireless Network Driver. I even downloaded the driver from Support Downloads. After I installed it, a notification popped up in the task bar with the Intel(R) PROSet/Wireless saying Driver is not installed. edit: in device manager, under network adapters there is only the 1394 net adapter and there are yellow exclamation marks in other devices.
View 19 Replies
View Related
May 18, 2011
I have a wireless adapter WMP54G for a long time, but recently i updated to windows 7 and the problems begun.
After read a lot of stuffs about this problem, i downloaded a driver by RALINK and installed de adpter. But......on the installation, show two hardware: one is the adapter Linksys WMP54G...and the other can't be installed. So..on the Device manager appear like "unknown device" on the three of "USB controllers"
So...i'm already try a lot of things and can't install this adapter
View 4 Replies
View Related
Aug 17, 2011
While I have been VERY happy using my DIR-655 for the most part, all wireless routers have limitations for expansion across your home.I got my TrendNet TEW-640MB installed last night, and it talks to the 655 perfectly, and now I have 4 ethernet ports at distance across my house. I have also used a couple TrendNet TEW647Ga single port wireless bridge for other parts of my home, but with only a single Ethernet port, you still need a little switch/hub to get the extra ports.
Because these units speak .11N at 300 Mbps, it takes full advantage of the technology the 655 gave me when I bought it back in 2009 (??).
View 5 Replies
View Related
