Cisco Wireless :: Getting WAP4410N To Stream Audio And Video?
Sep 21, 2010
I have the WAP4410n connected to a SLM2008. I tried to change to 100Mb the port in the switch but then I lost the connectivity.
But it's a giga port and it must work as a giga port. The new firmware must resolve the problem, and not to be a work around. Or what will be the next, not to use N, only G, or only 20MHz or...
I need the WAP4410n for streaming audio and video?
View 1 Replies
ADVERTISEMENT
Mar 24, 2012
I am able to stream audio from a website when i connect directly to my cable modem but when the router is connected it doesnt work. I have tried resetting the router, ping the website and get "request timed out"The firmware is up to date version 2.25 I have tried other computers that access the same network and they also cant stream the audio.I have also turned off my windows 7 firewall with no luck I can access other sites I visit and stream audio just fine so I wonder if the router may be blocking something on this website?Is there a way to allow an audio stream to come through that may be blocked by the router?
View 1 Replies
View Related
Nov 8, 2011
Using as AP. Last Tuesday in the middle of a Netflix movie the video stopped. Now the wireless portion of the DAP-1522 refuses to pass any type of video. Everything else works (email, Google, Facebook, etc.). I can get to Netflix, Youtube, Yahoo, etc. .....but none of them will pass video.
Using a direct wired connection to the DAP-1522 everything works. Netflix, Youtube, etc.
Download speed checks at 17.74mbps.
View 11 Replies
View Related
Mar 24, 2011
Actually i need a streaming server that supports both audio(mp3) and video formats(mp4,avi..).But it should work in multicast and should possible to stream with VLC media player.now i'm trying helix media server.In this what are the procedures to configure helix sever in multicast.and how to stream media from it.Or Any other streaming server is there that suits for my need.
View 1 Replies
View Related
Feb 17, 2011
Is it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies
View Related
Dec 13, 2012
I've been viewing some videos streamed through the EA6500 from a Qnap 419p II NAS, and several video files are playing back extremely choppy.I can confirm that the video files play fine on the Xbox360 using a USB key and have also previously streamed these videos without any problems using a Belkin Wireless Pre-N router (that I upgraded from) streamed from the same NAS.I've attempted to configure the Media Prioritization feature, but haven't noticed any different results. I have also adjusted other various settings that haven't affected the playback in any way.
My only guess is that some of the files are encoded in a format that the router is struggling with - the video files are not HD videos, and their bitrates are generally quite low - if my old Belkin router can do it, the EA6500 shouldn't have any problems either.
View 5 Replies
View Related
Apr 16, 2011
When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies
View Related
Mar 14, 2012
how to use my lG flatron TV set to watch any DVD movie OR VCD movie show in my neighbourhood without payment fee?
View 1 Replies
View Related
Jul 13, 2012
I have been having a problem with my 4400n dropping connection when streaming video / audio.It is connected half duplex to a cat2950 and the media server is mediatomb on a linux box the client is a ps3 presently.
View 3 Replies
View Related
Sep 18, 2012
How do I setup this on the SRP527W? I already block most of the video stuff on the internet. But I want to make this one more step.
View 1 Replies
View Related
Feb 16, 2013
What do I need to stream video from my laptop to my tv?
View 2 Replies
View Related
Sep 19, 2012
I think there is a problem with the settings on my router or something like that. When I watch videos on streaming sites the load bar tends to go up but only so far before freezing. If you slide the button along once the umbrella spinny thing gets going then the load bar will kick back into life again for a few seconds before freezing! The problem also effects downloads. Anything that takes longer the 5 or 10 seconds will fail. This has stopped me downloading simple things such as iplayer and flash updates. I know its not a problem with my computer as it effects all the machines that pass through the house. Were currently getting Virgin wireless broadband (so I dont think its a speed issue).A tecky friend of mine thinks it might be something to do with the 'packets' of information or the channel that my router is operating on
View 16 Replies
View Related
Mar 20, 2011
I'd like to use VLC to view the MJPEG stream from the DCS-930L. What URL should I use to do this?
View 9 Replies
View Related
Oct 3, 2011
I posted this on a previous thread along with another question, but since I marked that as answered I'll post it here so people will see it.Is there any way I can use UPnP WITHOUT having to have the videos I want to stream in my WMP library? Windows Media Player has always been a pain for me, from my videos not showing up in the library when I know they're there to not being able to switch audio streams in a video. (If VLC Media Player or iTunes had a UPnP library.
View 3 Replies
View Related
Jun 17, 2010
I recently bought 3 DCS-920 to monitor my home while at the office. However I can't seem to get the damned things to stream video using the dyndns service. I linked my router to the dyndns account and host service. I portforward the ports my cameras are assigned. Up to this point its all good, I can access the cameras and their settings pages while outside. However both the Java and ActiveX options for video streaming do not work. Even within the network, using their raw IPs to view the cameras the videos stream works.But putting in the hostname and port they are assigned brings up the camera page, but no video.I can only assume the ports the video and audio run on are seperate, as when I put one camera's IP in the DMZ host on my router, it works with the DNS. Unforunately I can only do that with 1, and I'd rather not do that at all.
View 6 Replies
View Related
Sep 14, 2011
When accessing the camera on mydlink, or on a browser using http://x.x.x.x/mjpg.cgi, I would expect the net bit rate to be substantially less than for a sequence of jpg's, since true motion-jpg uses a lossy form of intraframe compression typically yielding a 20:1 data reduction (according to wikipedia). Indeed, I can readily see this reduction in mjpg clips made on my Canon S5is camera. It's not clear whether that is happening with the d-link DCS-930L camera (640x480, quality "high", java).
View 5 Replies
View Related
Mar 17, 2011
The DCS-930L provides no date & time on video stream at mydlink, but does display those when accessing on the LAN. Is there a way to force the date/time tag to show over the web? Otherwise, remote recording might not know when an event happened?
View 1 Replies
View Related
Feb 26, 2012
This causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies
View Related
Apr 30, 2011
I have the following equipment:
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3
I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable. About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed. The link is stable (I have had the best results with B/G). The problem is, I didn't buy the 2nd 4410N to run the G protocol. I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only. I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.
View 1 Replies
View Related
Feb 13, 2013
I am trying to hook up a wireless projector and connect an old audio mixer to my Laptop wireless and in sync so that I can operate the projector video and audio from my laptop anywhere in the room. I have a 30' by 60' sanctuary in my church an old audio mixer hooked up to key board, mics and speakers and one cordless mic. I am considering purchasing a Epson Powerlite 96W Projector and the optional wireless LAN module but wondered if there was a way to hook up a Epson EX7210 projector wireless as it does not accept the optional wireless LAN module. Also we currently have a great singer and no musicians so I am trying to find church presentation software that would include lyrics, background effects and music to accompany our singer.
View 1 Replies
View Related
Mar 24, 2010
We have a new deployment where we have 5 total 7921G wifi phones connected via 2 AP541n access points, one connected to a ESW520p switch and then to the UC540 and the other connected directly to the UC540. The wifi phones are intermittently giving no audio when calling each other, however, calls to the PSTN consistently do have 2 way audio. Is this a security issue perhaps? We are running the latest CCA software pack as this is a brand new deployment, also the AP's were upgraded to the latest firmware.
View 14 Replies
View Related
Aug 27, 2011
Since a few days my WRT120N gives an audio alarm (beep) about every 10 secs. Cannot find how to overcome this or find the root cause. Installed new s/w version. H/W reset. Nothing works.
View 2 Replies
View Related
Sep 8, 2012
Time for me to update my router. I have been using a Dlink DGL-4300 for 8 years now and never had a problem with it until now. It can't stream HD wirelessly, so I need to get an N router. What's the cream of the crop these days?
I was thinking of going with the DIR-825 or the DIR-835. How have Dlink's router quality faired over the past few years?
View 9 Replies
View Related
Jun 11, 2011
I am wanting to make my desktop wireless I have a D LINK dual band wireless router now. My laptop is wireless and works fine my desk top is hardwired to router. Thinking of moving my moden and router to TV and making my desktop wireless and hardwireing my media server I think it called ( still yet to be bought still doing home work on which one to get and how to hook up ) Thinking less signal loss be hardwired to media server. I now have AT&T DSL 1.5 MB upgrading to 6.0 MB to stream netflicks . Do you think 6 MB will steam OK? Should I Go with just a USB adapter or go to PCI internal Adapter? In reading some of the other post seems hit or miss on adapter seeing and working with routher. Is there a brand or type of adapte I should look at? as I said Desktop will now be wireless media hardwire dose this sound like the way to go about doing this? Any media server that seems to work better than others . not doing x box or Wii not a gamer just want to stream Netflix without buffering and as good a picture as Poss.
View 1 Replies
View Related
Mar 18, 2012
I am using a Netgear N300 wireless router to stream Netflix movies to a Samsung Blu-ray player with wireless LAN. My problem is that some of the movies are not watchable because of rebuffering. About every two or three minutes into a film it rebuffs. Is this because of my equipment, my set-up, or is it just the nature of the beast?
View 1 Replies
View Related
Dec 28, 2011
I have an E3000 with an external hard drive attached via USB with several movies saved on it as ISO's. How to stream a movie to my wireless blu ray player, Sony S580. I was able to stream the iso to a netbook attached to the LCD tv by using VLC on the netbook. The only videos I can access on the blu ray player that are on the external hard drive are home videos I converted to DVD quality before uploading, they're not HD. I can access pictures and music on the blu ray from the external hard drive as well. I tried converting an iso to MVK but was unable to access/find it using the blu ray player.
View 2 Replies
View Related
Dec 4, 2012
Does anyone use an external hard drive connected to their e4200 router to stream movies over DLNA? If so what format of videos are you using and what program and settings are you using to convert the movies from DVD or blu-ray to video files?
I have been using handbrake to convert both blu-ray and DVD movies to MP4 videos with AAC audio and I have been getting strange results. If I convert a blu-ray movie to MP4 with a DTS audio track down mixed to Dolby Pro Logic II AAC then I can play the movie and I am able to fast forward and rewind. If I convert the same movie but convert the audio in any other way, AC3 pass through etc., the video will play but I will not be able to fast forward or rewind.
View 6 Replies
View Related
Dec 30, 2012
we just hooked up our ea4500. netflix will not stream from the wireless set.
View 3 Replies
View Related
Jan 5, 2010
On my WRT610N with firmware version 2.xxxx (latest available at this moment), I have connected a Lacie harddisk (in RAID-1) by the USB port and I have activated the mediaserver. I have connected through a wireless dongle my Samsung TV(UE46B7000) to my mediaserver.
My mediafiles are visible and can be played, however I'm not able to get my subtitles with them. I tried srt, ssa, smi, sub formats but in vain. These subtitles are stored in the same location. If however I copy the same mediafiles and subtitles directly to another external harddisk, which I connect to another USB port on the TV I can watch these mediafiles and my subtitles are also available. So my question: what do you need to do to render your subtitles visible?
View 3 Replies
View Related
Feb 23, 2011
I've bought a E3000 as replacement for my Linksys WRT350N router.Just upgraded the firmware to version Ver.1.0. 04 (build 6).I use aonTV - an austria IPTV service (Multicast via UDP) - an this worked with my old WRT350N (hw version 1) consistantly well. I hardly had to reboot the router to get the multicast stream.With E3000 I checked the option that it should not filter any multicast traffic - when I reboot the router it works for some time - but after some hours it does not work anymore? I want to watch TV via my HTPC connected via GigaBit Power to the E3000.
View 3 Replies
View Related
Dec 12, 2011
Im trying to locate the PDLM for the RTP audio for the 4500 series switch,
System image file is "boot flash:cat4500-entservices-mz.150-2.SG.bin"
Cisco WS-C4507R+E (MPC8245) processor (revision 7) with 524288K bytes of memory.
MPC8245 CPU at 333Mhz, Supervisor IV
Last reset from Power Up
8 Virtual Ethernet interfaces
48 Fast Ethernet interfaces
100 Gigabit Ethernet interfaces
403K bytes of non-volatile configuration memory.
It seems to be an easy task for routers:
[URL]
But not for these 4500's
[URL]
View 1 Replies
View Related
Dec 2, 2012
I have a user that uses an ASA 5505 in NEM to have his/her laptop and Cisco IP Phone at home. The ASA 5505 establishes a tunnel to an ASA 5510, which is connected and speaking EIGRP to our core switch. Off of the core switch we have our CCM cluster.
The issue happens on the first call after a long period of no calls. After if happens on the first call, he/she can continue to make calls without the issue. I though it was a timeout issue, but his/her ASA configuration is the exact same. Also, he/she is using the same group policy, tunnel-group etc. as everyone else with the same setup.
This issue happens regardless if she has a PC behind the phone or not.Internal calls and external are both affected.
I am aware that most one-audio issues are RTP connectivity issues between the two endpoints. I can clearly see in the routing table of all of our routers, that the route to the subnet her phone is on has not changed for days, and she has had the issue within that amount of time.
I'm looking for a good place to start troubleshooting that doesn't require me to to a pcap. If all else fails, I will do a pcap.
View 2 Replies
View Related
Nov 14, 2012
trying to stream movies from the USB drive pluged into EA4500 using 3G or remotely. I got Media Server (DLNA) turned on and FTP Server setup. I also setup Dynamic DNS. I can managed to see the media server on iPhoto using WIFI connection with UpnPPeek. I'm wondering if it is possible that any iphone apps like Air Video can be able to stream movie remotely without turn on the computer?
View 9 Replies
View Related