Linksys Wireless Router :: WRT610n Mediaserver Does Not Stream Subtitles
Jan 5, 2010
On my WRT610N with firmware version 2.xxxx (latest available at this moment), I have connected a Lacie harddisk (in RAID-1) by the USB port and I have activated the mediaserver. I have connected through a wireless dongle my Samsung TV(UE46B7000) to my mediaserver.
My mediafiles are visible and can be played, however I'm not able to get my subtitles with them. I tried srt, ssa, smi, sub formats but in vain. These subtitles are stored in the same location. If however I copy the same mediafiles and subtitles directly to another external harddisk, which I connect to another USB port on the TV I can watch these mediafiles and my subtitles are also available. So my question: what do you need to do to render your subtitles visible?
View 3 Replies
ADVERTISEMENT
Mar 15, 2012
I am sharing media from my Linksys E3000 router and would like to use subtitles (in separate files) for movies. It is working when I am using Samsung PC based AllShare server but not while using E3000 UPnP server. On the other hand I found some info on the web that Twonky should support subtitles. But maybe different version then embedded into E3000.
View 4 Replies
View Related
Dec 28, 2011
I have an E3000 with an external hard drive attached via USB with several movies saved on it as ISO's. How to stream a movie to my wireless blu ray player, Sony S580. I was able to stream the iso to a netbook attached to the LCD tv by using VLC on the netbook. The only videos I can access on the blu ray player that are on the external hard drive are home videos I converted to DVD quality before uploading, they're not HD. I can access pictures and music on the blu ray from the external hard drive as well. I tried converting an iso to MVK but was unable to access/find it using the blu ray player.
View 2 Replies
View Related
Dec 4, 2012
Does anyone use an external hard drive connected to their e4200 router to stream movies over DLNA? If so what format of videos are you using and what program and settings are you using to convert the movies from DVD or blu-ray to video files?
I have been using handbrake to convert both blu-ray and DVD movies to MP4 videos with AAC audio and I have been getting strange results. If I convert a blu-ray movie to MP4 with a DTS audio track down mixed to Dolby Pro Logic II AAC then I can play the movie and I am able to fast forward and rewind. If I convert the same movie but convert the audio in any other way, AC3 pass through etc., the video will play but I will not be able to fast forward or rewind.
View 6 Replies
View Related
Dec 30, 2012
we just hooked up our ea4500. netflix will not stream from the wireless set.
View 3 Replies
View Related
Feb 23, 2011
I've bought a E3000 as replacement for my Linksys WRT350N router.Just upgraded the firmware to version Ver.1.0. 04 (build 6).I use aonTV - an austria IPTV service (Multicast via UDP) - an this worked with my old WRT350N (hw version 1) consistantly well. I hardly had to reboot the router to get the multicast stream.With E3000 I checked the option that it should not filter any multicast traffic - when I reboot the router it works for some time - but after some hours it does not work anymore? I want to watch TV via my HTPC connected via GigaBit Power to the E3000.
View 3 Replies
View Related
Nov 14, 2012
trying to stream movies from the USB drive pluged into EA4500 using 3G or remotely. I got Media Server (DLNA) turned on and FTP Server setup. I also setup Dynamic DNS. I can managed to see the media server on iPhoto using WIFI connection with UpnPPeek. I'm wondering if it is possible that any iphone apps like Air Video can be able to stream movie remotely without turn on the computer?
View 9 Replies
View Related
Jan 8, 2013
I've got a E3000 router and I'd like to be able to stream movies and access files from the USB connected HD on my router to my galaxy tablet.I understand that this can be done. I've poked around and cannot find anything that's worked for me.
View 6 Replies
View Related
Dec 13, 2012
I've been viewing some videos streamed through the EA6500 from a Qnap 419p II NAS, and several video files are playing back extremely choppy.I can confirm that the video files play fine on the Xbox360 using a USB key and have also previously streamed these videos without any problems using a Belkin Wireless Pre-N router (that I upgraded from) streamed from the same NAS.I've attempted to configure the Media Prioritization feature, but haven't noticed any different results. I have also adjusted other various settings that haven't affected the playback in any way.
My only guess is that some of the files are encoded in a format that the router is struggling with - the video files are not HD videos, and their bitrates are generally quite low - if my old Belkin router can do it, the EA6500 shouldn't have any problems either.
View 5 Replies
View Related
Aug 25, 2011
At home I am using the linksys wireless bridge WET610N to stream media to my livingroom. The setup looks like server <-> Linksys E4200 <-> WET610N. If I connect my laptop to the WET610N i get a speed close to 100Mbit/s. With this speed I can easily view HD movies, by playing them on my laptop. So far so good...But if I instead connect my Popcorn Hour A-100 (a media player) , to the WET610N (instead of the laptop) I get really poor performance. just a few Mbit/s, which is not enough.So my question is, why is the following setup working fine:server <-> Linksys E4200 <-> WET610N <-> LaptopWhen at the same time the following setup is working poorly:server <-> Linksys E4200 <-> WET610N <-> Popcorn HourThe WLAN connection between the Linksys E4200 and Linksys WET610N seems to be fine. The problem I am having seems to be the Ethernet connection/setup between the WET610N and the Popcorn Hour media player.
View 1 Replies
View Related
Dec 25, 2009
I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies
View Related
Jul 12, 2011
How can I open the Nat for both systems on my single router.
View 2 Replies
View Related
Jul 26, 2011
I was told that this router would push the PoE to the WAP4410N. I hooked the AP up to port 1 and no lights or anything... The network is all cat6, patch cords are cat6 shielded if this matters at all... what am I missing.
View 3 Replies
View Related
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Dec 20, 2011
I have the Linksys WRT610N wireless router and would like to know if it is possible to block all domains ending in .XXX? The access restrictions let you type in a 'specific' URL, but using a generic domain name doesn't seem to work. I basically want to block all access to any URL that ends in .XXX.
View 5 Replies
View Related
May 13, 2012
I just bought a certified refurbished router. The model is WRT610N-RM. Where's what I've done:
1. Downloaded newest firmware from the site using old router, Then disconnected. Connected a lan cable to the new router. Powered up the router. Held down reset untill the light blinks. Went to the browser and typed 192.168.1.1. Entered password to go into router and upgraded firmware. 2. 5 Ghz Settings: Went to Wireless menu. Selected "manual", mode is "mixed" (If i chose N only for 5 Ghz, then It won't save my setting for internet security. Instead it will be "disable" no matter what". The rest was default. SSID is enabled. Then I set up the 2.5 Ghz. I have 3 other computers with N wireless card. Some others have G, however when I viewed available networks, I only see the 2.4 Ghz ssid. I tried to reboot and unplug power for 10 seconds, but no luck seeing the 5 Ghz.
View 6 Replies
View Related
Nov 15, 2011
ive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies
View Related
Feb 27, 2012
I have an E4200 with a USB hard drive connected to its USB port. I want to use the E4200 media server to stream divx and other video files on my Sharp Aquos HDTVs.I have an LC-70LE732U and a LC-52LE832U wired to my network. Both of them seem to discover and successfully connect to my media server however only MP3s and certain MPG files are detected. None of the AVI files show up.I have upgraded my E4200 firmware to 1.0.03 hoping that would fix the problem but it didn't. I don't want to run a Windows based media server as I don't have a computer that I can leave on all the time.
View 3 Replies
View Related
Jun 26, 2012
I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via [URL]... The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.
View 9 Replies
View Related
Mar 18, 2012
I have had no problems with my WRt610N fo 2 years. Yesterday a problem occured and today again. Namely, I opened my laptop (the lid) and suddenly it could not see my network (SSID) among the rest of the neighbouring ones. The WiFi indicator in the tray showed the yellow "!". Since I have another (secondary) router wired to the primary (WRT610N) I tried and succeeded to connect to it (same SSID, but type "g").
Today the same situation. This is the straneg thing - if I 1st connect to the "g" router after a while the WIn7 reports my SSID being of type "gn" meaning it now sees the primary WRT610N. If I switch off the secondary the netowork is maintained by the primary router showing "n". It seems like my laptop cannot see my router (but can see all other networks) until it 1sr connects to the secondary, and afterwards it sees the primary router and can stay with it.
View 1 Replies
View Related
Feb 4, 2010
Is LinkLogger the only option for reading logs on the WRT610Nv2? I read about Linksys's own software called LogViewer 1.14 but I can't find it.
View 3 Replies
View Related
Jun 12, 2012
I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?
View 9 Replies
View Related
Aug 3, 2012
I am trying to filter a URL, facebook and it is not working. I have tried rebooting the router and it is still allowing access. I have provided the settings and ranges for PCs.
View 3 Replies
View Related
Dec 27, 2011
My WRT610n went out today for no apparent reason.All of my other peripherals are still running, but the router won't turn on. I've tried different transformers, outlets and powerstrips, with no luck -- no power. I've also tried a hard reset on it, with no luck.
View 3 Replies
View Related
Feb 22, 2011
How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?
View 9 Replies
View Related
Feb 17, 2010
Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N. I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel. Linksys support told me that the hardware was not compatible with the high channel.
View 3 Replies
View Related
Oct 10, 2011
To connect my new "smart tv" with my wireless linsys WRT610N, smart tv ask to take off all protection such as firewall and antivirus. Doing so, I cannot connect my laptop with my router. Is there a solution to connect both at the same time?
View 1 Replies
View Related
Sep 10, 2009
I read an earlier posting about an issue between SPI on the latest WRT610N Version 1.0 firmware and a user's Apple TV. This pointed me to a "solution" to a perplexing problem I was having.
I have 4 machines, 3 connected via WiFi and 1 on one of the wired ethernet ports. I also have 2 Apple Airport Express units for audio streaming as well as 2 iPhones connected wirelessly.
Now for the symptoms, which are all new since updating to firmware ver.1.00.03.15:
1. The WiFi machines see the Airport Express units and can stream audio to them. However, the iPhone Remote app has trouble staying connected to iTunes running on any of these machines. A router reboot is a temporary fix, but connection is eventually lost again.
2. The wired machine cannot see the Airport Express units, nor can the Remote app pair with iTunes on that machine. It's as though no Bonjour-related functions work. Here, a router reboot also provides a temporary fix, but one that lasts only minutes.
Based on that prior post, I disabled SPI on the router and, lo and behold, the wired machine suddenly sees all Airport Express units and can pair with the iPhone Remote app!
I was going crazy, verifying that I was not having Windows Firewall issues, that there wasn't an incompatibility with Windows 7 (which I'm running on all), that this wasn't a Homegroup incompatibility of some sort, that Bonjour was up to date, etc. Only turning off SPI fixed the problem entirely.
So, Linksys ...Any firmware bug fix in the works for this? Can I safely go back to the prior firmware update without security or function concerns? If so, where can I get my hands on the older firmware file?
WRT610N Version 1.0 running 1.00.03.15
View 9 Replies
View Related
Oct 3, 2011
i used my 610N v2 for 2 years and recently i upgraded my network from 100mb to fiber 500mb , however, if i directly plug the lan cable to my computer , i can get full speed , but with 610N, the speed is limited to 130 for both upload and download .i had already upgrade my firmware and did factory reset, none of them work. Is it the limitation of the router ?
View 1 Replies
View Related
Jun 30, 2011
For some reason, I have been trying to use QOS for several network related jobs (VPN, streaming). It would seem that when QOS is enabled and the appropriate ports are set which a high priority, the speed of my connection drops to a crawl. When I disable QOS, I'm flying again. I have confirmed ports, and protocol types (TCP or UDP) and nothing seems to work.
View 2 Replies
View Related
Jan 16, 2009
I just purchased a WTR610N and when I connect to the admin interface over SSL it gives me a cert that expired on 12/31/1970. I updated the firmware and that didn't change anything. How to get it to use a valid cert?
View 9 Replies
View Related
Dec 28, 2011
I want to connect one "wrt610n router" to modem directly through Ethernet cable and when i connect both of them every thing is working fine and iit gives proper internet connection through WLAN [code] But, when i tried to connect "second WRT610N router" through "first one WRT610N router" through LAN_cable(cat 5) then second router do'nt provide(give) internet connection second router ip-- 192.168.1.5
View 4 Replies
View Related
Oct 22, 2011
how to set up my router settings/port forwarding to be able to use Wake on Lan with Depicus here is what I currently have:DHCP Reservation with the IP Address of my computer (192.168.1.xxx) and the MAC address xx:xx:xx:xx that I retrieved by doing ipconfig /all in the cmdMy Router address is 192.168.1.1 and the submnet mask is 255.255.255.0my DDNS service is disabledIn the Security tab, I unchecked Filter anonymous internet requestsIn Applications and Gaming, under single port forwarding, I have port 7 to 7, Both TCP and UDP, forwarded to the IP address of my computer 192.168.1.xxx and it is enabledMy network card is configured already, enabling WOL in the card's properties.Now when I use Depicus, I enter the MAC, my external IP address which I got from myipaddress.com, subnet mask I use 255.255.255.0, I select Internet, and then the remote port I use is 7,Doing that, nothing happens at all. however, I can easily wake up my computer if I am connected to the same local network at home.
View 3 Replies
View Related
