Linksys Wireless Router :: Stream To Blu-ray Player Using E3000?
Dec 28, 2011
I have an E3000 with an external hard drive attached via USB with several movies saved on it as ISO's. How to stream a movie to my wireless blu ray player, Sony S580. I was able to stream the iso to a netbook attached to the LCD tv by using VLC on the netbook. The only videos I can access on the blu ray player that are on the external hard drive are home videos I converted to DVD quality before uploading, they're not HD. I can access pictures and music on the blu ray from the external hard drive as well. I tried converting an iso to MVK but was unable to access/find it using the blu ray player.
View 2 Replies
ADVERTISEMENT
Feb 23, 2011
I've bought a E3000 as replacement for my Linksys WRT350N router.Just upgraded the firmware to version Ver.1.0. 04 (build 6).I use aonTV - an austria IPTV service (Multicast via UDP) - an this worked with my old WRT350N (hw version 1) consistantly well. I hardly had to reboot the router to get the multicast stream.With E3000 I checked the option that it should not filter any multicast traffic - when I reboot the router it works for some time - but after some hours it does not work anymore? I want to watch TV via my HTPC connected via GigaBit Power to the E3000.
View 3 Replies
View Related
Jan 8, 2013
I've got a E3000 router and I'd like to be able to stream movies and access files from the USB connected HD on my router to my galaxy tablet.I understand that this can be done. I've poked around and cannot find anything that's worked for me.
View 6 Replies
View Related
Jul 26, 2010
I am unable to see my network media player (wired CAT6 or wireless) using the SAMBA Share feature. My UPNP works fine. I do not have this issue when I am using the Linksys WRT54G or a Netgear WNDR3700 (I returned it to give the E3000 a try) - so I know all my share persmissions and device firewall is turned off. How do I get it to work with the E3000? I want to be able to transfer and stream media files to my media player using SAMBA. Usually my network media player automatically detects SAMBA Servers/Devices and adds it to its list for me to access. But when I use the E3000 that is not the case.
View 4 Replies
View Related
Apr 18, 2012
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
View 1 Replies
View Related
Jan 28, 2011
My new Samsugn blu ray player must be connected to the cable modem at the same time as my PC to stream movies says Netflix. Only problem is there is only one HDMI connection back there. I do not wish to by surrounded by RF so I want to go with cables. What is the best way to proceed? I repeat, I do not wish to have a wireless router.
View 1 Replies
View Related
Nov 16, 2012
I am in need of playing a stream (generated by s program like VLC) on more than 3 TV's. The TV's are dumb lcd's with just hdmi connectors (no lan). I thought about getting some media players that I connect to the local network which will then pick up my stream and stream it further to the TV's.
View 3 Replies
View Related
Oct 3, 2011
I posted this on a previous thread along with another question, but since I marked that as answered I'll post it here so people will see it.Is there any way I can use UPnP WITHOUT having to have the videos I want to stream in my WMP library? Windows Media Player has always been a pain for me, from my videos not showing up in the library when I know they're there to not being able to switch audio streams in a video. (If VLC Media Player or iTunes had a UPnP library.
View 3 Replies
View Related
Sep 18, 2012
I got no code, and as a matter of fact have no Internet connectivity to my Bluray player. When I go to my Bluray setting tab and run a network test the MAC Address checks out but fails when it gets to IP Address. My Bluray is plugged directly into my router and it still shows no Internet connection between the two, even though my x-box 360 has no problem nor does my computer. When looking at my network settings the IP Addresss boxes all have numbers in them, the Subnet Mask boxes two of four boxes have numbers the others are zeros, the Gateway boxes are all zeros, and the DNS Server boxes are all zeros. I read many of the posts in this forum and all problems seem pretty similar to mine.
View 4 Replies
View Related
Dec 4, 2012
Does anyone use an external hard drive connected to their e4200 router to stream movies over DLNA? If so what format of videos are you using and what program and settings are you using to convert the movies from DVD or blu-ray to video files?
I have been using handbrake to convert both blu-ray and DVD movies to MP4 videos with AAC audio and I have been getting strange results. If I convert a blu-ray movie to MP4 with a DTS audio track down mixed to Dolby Pro Logic II AAC then I can play the movie and I am able to fast forward and rewind. If I convert the same movie but convert the audio in any other way, AC3 pass through etc., the video will play but I will not be able to fast forward or rewind.
View 6 Replies
View Related
Dec 30, 2012
we just hooked up our ea4500. netflix will not stream from the wireless set.
View 3 Replies
View Related
Jan 5, 2010
On my WRT610N with firmware version 2.xxxx (latest available at this moment), I have connected a Lacie harddisk (in RAID-1) by the USB port and I have activated the mediaserver. I have connected through a wireless dongle my Samsung TV(UE46B7000) to my mediaserver.
My mediafiles are visible and can be played, however I'm not able to get my subtitles with them. I tried srt, ssa, smi, sub formats but in vain. These subtitles are stored in the same location. If however I copy the same mediafiles and subtitles directly to another external harddisk, which I connect to another USB port on the TV I can watch these mediafiles and my subtitles are also available. So my question: what do you need to do to render your subtitles visible?
View 3 Replies
View Related
Nov 14, 2012
trying to stream movies from the USB drive pluged into EA4500 using 3G or remotely. I got Media Server (DLNA) turned on and FTP Server setup. I also setup Dynamic DNS. I can managed to see the media server on iPhoto using WIFI connection with UpnPPeek. I'm wondering if it is possible that any iphone apps like Air Video can be able to stream movie remotely without turn on the computer?
View 9 Replies
View Related
Dec 13, 2012
I've been viewing some videos streamed through the EA6500 from a Qnap 419p II NAS, and several video files are playing back extremely choppy.I can confirm that the video files play fine on the Xbox360 using a USB key and have also previously streamed these videos without any problems using a Belkin Wireless Pre-N router (that I upgraded from) streamed from the same NAS.I've attempted to configure the Media Prioritization feature, but haven't noticed any different results. I have also adjusted other various settings that haven't affected the playback in any way.
My only guess is that some of the files are encoded in a format that the router is struggling with - the video files are not HD videos, and their bitrates are generally quite low - if my old Belkin router can do it, the EA6500 shouldn't have any problems either.
View 5 Replies
View Related
Aug 25, 2011
At home I am using the linksys wireless bridge WET610N to stream media to my livingroom. The setup looks like server <-> Linksys E4200 <-> WET610N. If I connect my laptop to the WET610N i get a speed close to 100Mbit/s. With this speed I can easily view HD movies, by playing them on my laptop. So far so good...But if I instead connect my Popcorn Hour A-100 (a media player) , to the WET610N (instead of the laptop) I get really poor performance. just a few Mbit/s, which is not enough.So my question is, why is the following setup working fine:server <-> Linksys E4200 <-> WET610N <-> LaptopWhen at the same time the following setup is working poorly:server <-> Linksys E4200 <-> WET610N <-> Popcorn HourThe WLAN connection between the Linksys E4200 and Linksys WET610N seems to be fine. The problem I am having seems to be the Ethernet connection/setup between the WET610N and the Popcorn Hour media player.
View 1 Replies
View Related
Aug 19, 2012
It is a wired, not wireless connection. The light isn't even coming on for the port it's plugged into. I tried a different cord, a different port, upgrading the firmware, and restarting each device. Nothing has worked so far.
View 9 Replies
View Related
Mar 21, 2011
I have WRT54G router. The VIZIO VBR231 unit finds the network OK and indicates it is connected, but nothing will stream, and when I run a Network Test it gives me this 3 line error:
Connection to 0.0.0.0... successfully established
Resolving... could not be established
Please check your connection and try again.
The VIZIO support folks were not beneficial at all, and said something about Port 80 or Port 43 not being open or available. When I talked to linksys support, they said I needed to add the VIZIO player's IP (which appears to be 0.0.0.0 in the system settings). I poked around a bit, including the Port Forwarding tab on the router setup, but could not see a way to assign 0.0.0.0 to one of these ports, and I am hesitant to experiment.
I'll probably just return the unit to Costco, but I'm trying this forum as a last ditch effort. BTW I have a VIZIO internet TV that I love, and that had absolutely no problem at all connecting to the wireless.
View 4 Replies
View Related
Jan 28, 2012
I am unable to get this to hook up my vizio dvd player to wifi
View 2 Replies
View Related
Jan 4, 2012
I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies
View Related
Nov 21, 2012
I have an e1200 Linksys router hooked up and working well, a wired connection to my first computer a wireless connection to my second (laptop) in the basemen and to my HDTV. My question is what Linksys device would I need to enable me to get a wireless connection in the basement to then hardwire connections to my Blue-Ray player and my HK AVR-3650.
View 2 Replies
View Related
Feb 27, 2012
I have an E4200 with a USB hard drive connected to its USB port. I want to use the E4200 media server to stream divx and other video files on my Sharp Aquos HDTVs.I have an LC-70LE732U and a LC-52LE832U wired to my network. Both of them seem to discover and successfully connect to my media server however only MP3s and certain MPG files are detected. None of the AVI files show up.I have upgraded my E4200 firmware to 1.0.03 hoping that would fix the problem but it didn't. I don't want to run a Windows based media server as I don't have a computer that I can leave on all the time.
View 3 Replies
View Related
Dec 17, 2011
I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.
View 2 Replies
View Related
Apr 22, 2012
I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?
View 2 Replies
View Related
Jun 29, 2011
I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.
View 9 Replies
View Related
Feb 1, 2011
I have been able to play streaming video via Windows Media Player with no problems for just about forever until last month.No software has changed. i have the latest firmware (2.39.2e) for the router. i am able to play the same videos when i use my AT&T data connection or when i am connected at work, ,so i know it's not the files i'm trying to view. WMP fails to play whether i am hard connected or wirelessly connected.
View 1 Replies
View Related
Apr 2, 2012
I have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies
View Related
Jul 11, 2011
How do you set up the E3000 for ATT u-verse?
View 2 Replies
View Related
May 9, 2012
install linksys e3000.
View 1 Replies
View Related
Oct 26, 2012
I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies
View Related
Nov 3, 2012
I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies
View Related
Feb 17, 2011
It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow. And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes). But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.
View 8 Replies
View Related
Aug 21, 2011
We have a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..
View 5 Replies
View Related
Apr 19, 2010
Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application.
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net). As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.
View 9 Replies
View Related
