Linksys Wireless Router :: WRT610N V2 Not Broadcasting 5 Ghz?
May 13, 2012
I just bought a certified refurbished router. The model is WRT610N-RM. Where's what I've done:
1. Downloaded newest firmware from the site using old router, Then disconnected. Connected a lan cable to the new router. Powered up the router. Held down reset untill the light blinks. Went to the browser and typed 192.168.1.1. Entered password to go into router and upgraded firmware. 2. 5 Ghz Settings: Went to Wireless menu. Selected "manual", mode is "mixed" (If i chose N only for 5 Ghz, then It won't save my setting for internet security. Instead it will be "disable" no matter what". The rest was default. SSID is enabled. Then I set up the 2.5 Ghz. I have 3 other computers with N wireless card. Some others have G, however when I viewed available networks, I only see the 2.4 Ghz ssid. I tried to reboot and unplug power for 10 seconds, but no luck seeing the 5 Ghz.
View 6 Replies
ADVERTISEMENT
Oct 30, 2012
I set up EA6500. All kinds of problems with anything on the 2.4 MHz band. My wireless desktop on the 5.0 MHz band was flawless. So I ran Xirrus Wi-Fi Inspector (freeware). The router is transmitting two 2.4 MHz signals! One is the SSID I set up and named. The other one is identical in every way except that the BSSID is slightly different. It is a non-broadcasted SSID that shows up on every device as "Other Network." I was on the phone with Cisco Support tonite, and they were great as usual but had no answer. If you change the channel on the 2.4 MHz band, the shadow network also changes to the same channel (this blew the Tech's mind). We reset the router to factory settings and started over. They are calling me back tomorrow. This router has great features on paper, but so far, it has not delivered.
View 5 Replies
View Related
Jan 4, 2012
I just purchased the E2500 and both bands are only broadcasting transfer rates at 144N instead of the advertised 300N. My old router broadcast at the 300N rate on the same ISP serving a range of devices. I contacted chat support and tried to discuss the issue for about 30-60 minutes before getting fed up with the lack of progress on the issue. The gist I got from the support agent was that I would only be able to achieve the 300N rate in N only mode instead of the mixed mode. I don't know the available modes of all the client devices that would need to connect but this would not be acceptable as my old router was capable of serving the range of devices while also giving the max rate of 300N to those devices that could utilize it. I verified the difference in transfer rates using [URL] with my old router giving the higher rates expected from 300N over 144N.
View 2 Replies
View Related
Apr 18, 2012
SSID is not being broadcast from an e3200. I split the wireless networks and assigned a new name for the 5Ghz band. The broadcast SSID button is enabled for both networks. (2.4 & 5). The idea is I want to stream video on the 5Ghz band. Nothing seems to see it though, TV other PCs, etc.
View 1 Replies
View Related
Dec 18, 2012
I have dynamic IP address from my ISP.When I am away from my EA4500 router, can I get my router to email me or somehow notify me of the IP it's been assigned so that I can communicate with the network remotely?
View 6 Replies
View Related
Jul 4, 2012
I am having no end of issues with this router since the upgrade to CCC. I don't want to downgrade because the reason I purchased the router was for the hopeful addition of more apps later on and the CCC.
My router has now suddenly decided to no longer broadcast N signals. My 2.4ghz network is set for mixed and my 5ghz is set for N Only. They are both set to auto channel and WPA2 Personal security and have been working since I purchased the router on Sunday.
Last night it spontaneously rebooted and that was that.
Both laptops (with N adapters) are seeing the 2.4ghz network as 802.11g and my 300Mbps notebook adapter is seeing the 5ghz network as 802.11a. InSSIDer is showing that both networks are now broadcasting at a max of 54Mbps.
I have tried rebooting the router multiple times. I have also tried unplugging it for 60 seconds. I have also attempted to force the 2.4ghz to 20Mhz and a more optimal (unused) channel. That doesn't work. I tried setting the 5ghz network to wide (40mhz) with an optimal channel. Same deal. Still seeing it as 802.11a.
View 9 Replies
View Related
Apr 3, 2013
My router has recently stopped broadcasting wifi, unfortunately it also no longer lets me use it as a router to get internet. if i plug directly into the modem i can get internet. but while using the router i get a computer symbol with an explanation mark on it
View 1 Replies
View Related
Oct 9, 2012
I just set up my new Linksys 3200 router and wanted to know if i should turn SSID boradcasting feature off?
View 2 Replies
View Related
Aug 6, 2012
I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012). This hasn't happened before, so I was hoping it would return but still hasn't started working yet.My iphone just says "unable to connect."
View 4 Replies
View Related
Jan 22, 2013
My belkin wireless dual band router just stopped broadcasting on the 2.4 band. The 5 band still worked (my wife's phone could still connect to it no problem).My cell is a motorola Razr maxx and only works on the 2.4. I have an app (wifi analyzer) that allows me to see what is happening with my network - specifically when i would try to connect to my network - my network name would be listed but as soon as I hit "connect" it would disappear. Only to come back into the list saying "MYNETWORK saved, secured WPA/WPA2". Every time I would try to connect same thing. Contemporaneously, I would check the network activity using wifi analyzer and could see that roughly each time I tried to connect to my network - it would drop off completely.Ok - after scouring the internet - it does seem that a wireless router can stop broadcasting on the 2.4 and still have the 5 band work. (btw - my pc is hardwired through the router and is not affected).So I bought a new Linksys 3500 dual band router. I installed it and it has worked fine....up until yesterday.Now I have the same problem. While my wife's phone still works on the 5 band it will not work on the 2.4. In fact nothing will work on the 2.4. Could I have just bought a crappy router?I'm not sure what pertinent info to list...Cell Stratosphere - works on 5 band not 2.4Cell Android razr maxx - will not connect on 2.4 (5 is not an option)Kindle - can not connect on 2.4Roku - can not connect on 2.4Tivo - can not connect on 2.4Older Linksys modem works with no problem.PC (sefl-built) running Windows 7 64 bit (w/ Norton) is not having any problems with connectivity - as it is hard-wired into the router.I've switched the 2.4 broadcast channel from 1 through 11. Nothing.I've cycled both the modem and the router about a dozen times - does not fix the issue.I have reset the router back to factory settings 3 times - no fixI am using WPA/WPA2 - but I have changed the router to run as unprotected - nothing changes.I've even out of desperation gone back and tried restoring my system to earlier restore points just to see if anything would happen. zilch.So did i just catch some bad luck by buying a faulty router?
View 9 Replies
View Related
Jun 30, 2011
How do you have the WAP610N and WRT610N using the same SSID? I would prefer to have my WAP610N simply just extend my network instead of broadcasting another.
View 1 Replies
View Related
Jun 12, 2012
This is my second E1000, the first one worked fine until the power supply flaked out and overheated. So I bought another E1000 and this one worked fine for about 6 months. Now it just quits broadcasting. It will work for a couple hours to 18 hours before it stops. I have to unplug it and wait 30 seconds, power up and it.
View 4 Replies
View Related
Jun 27, 2012
With the new firmware update, I have lost the functionality to disable broadcasting my SID after Pushed Firmware. There has to be a way to disable that information.
View 4 Replies
View Related
Mar 12, 2008
I the only one who's WRT160N occasionally just stops broadcasting WiFi and have to reset the router to get it back?
View 9 Replies
View Related
Aug 20, 2011
I changed the 5 GHZ SSID name using Cisco connect on my E3200 router as was expecting to see 2 available wireless networks on my laptop, but it seems that only the 2.4 GHZ is still broadcasting as it was before. When I connect to it with my laptop it shows it connecting with 802.11n, so I would think that my laptop would see the 5 GHz SSID if it was broadcasting. I am trying to take advantage of the dual band feature and connect the 5 GHZ to my blue ray player for real time video streaming.
View 9 Replies
View Related
Nov 10, 2011
So I have this E1500 Router that worked fine for the past 5 months, then out of the blue, the wireless feature ceased to function... laptops were not being able to connect to the wireless, the router was also not broadcasting the SSID.So, here's what I have done so far:
1. Check the router software settings, all was good there.
2. Did a "hardware reset" pushing the red button. (now this solved the problem, BUT only for a day, when power is turned off for the night, the next day it's non-functional again. The cycle can be repeated daily, but its a pain to reset and set it up everyday)
3. Updated the Firmware, and this somehow solved the problem for 3 Days... and now it's back to non-functional, again out of the Blue.
Is the Router just busted and it's not remembering the settings?
View 2 Replies
View Related
Nov 10, 2011
The wireless drops specifically from my laptop constantly at random times. When the wireless drops in order for me to be able to reconnect i have to restart the router itself. There are also random times where the Wi-Fi stops broadcasting altogether. I have a computer connected via Ethernet and it does not lose connection during these times. All the computers are running Windows 7 and the Router is up to date on firmware.
View 5 Replies
View Related
Dec 15, 2012
I've had a refurbished EA2700 since a few days after Black Friday. I've had some issues with it since day one. Currently, it's not broadcasting an N signal, but instead an A signal, even though I have the 5 GHz network set to N-only, and the 2.4 GHz one to G-only. I have the latest firmware version.
View 3 Replies
View Related
Dec 25, 2009
I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies
View Related
Jul 12, 2011
How can I open the Nat for both systems on my single router.
View 2 Replies
View Related
Jul 26, 2011
I was told that this router would push the PoE to the WAP4410N. I hooked the AP up to port 1 and no lights or anything... The network is all cat6, patch cords are cat6 shielded if this matters at all... what am I missing.
View 3 Replies
View Related
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Dec 20, 2011
I have the Linksys WRT610N wireless router and would like to know if it is possible to block all domains ending in .XXX? The access restrictions let you type in a 'specific' URL, but using a generic domain name doesn't seem to work. I basically want to block all access to any URL that ends in .XXX.
View 5 Replies
View Related
Nov 15, 2011
ive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies
View Related
Jun 26, 2012
I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via [URL]... The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.
View 9 Replies
View Related
Mar 18, 2012
I have had no problems with my WRt610N fo 2 years. Yesterday a problem occured and today again. Namely, I opened my laptop (the lid) and suddenly it could not see my network (SSID) among the rest of the neighbouring ones. The WiFi indicator in the tray showed the yellow "!". Since I have another (secondary) router wired to the primary (WRT610N) I tried and succeeded to connect to it (same SSID, but type "g").
Today the same situation. This is the straneg thing - if I 1st connect to the "g" router after a while the WIn7 reports my SSID being of type "gn" meaning it now sees the primary WRT610N. If I switch off the secondary the netowork is maintained by the primary router showing "n". It seems like my laptop cannot see my router (but can see all other networks) until it 1sr connects to the secondary, and afterwards it sees the primary router and can stay with it.
View 1 Replies
View Related
Feb 4, 2010
Is LinkLogger the only option for reading logs on the WRT610Nv2? I read about Linksys's own software called LogViewer 1.14 but I can't find it.
View 3 Replies
View Related
Jun 12, 2012
I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?
View 9 Replies
View Related
Aug 3, 2012
I am trying to filter a URL, facebook and it is not working. I have tried rebooting the router and it is still allowing access. I have provided the settings and ranges for PCs.
View 3 Replies
View Related
Dec 27, 2011
My WRT610n went out today for no apparent reason.All of my other peripherals are still running, but the router won't turn on. I've tried different transformers, outlets and powerstrips, with no luck -- no power. I've also tried a hard reset on it, with no luck.
View 3 Replies
View Related
Feb 22, 2011
How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?
View 9 Replies
View Related
Feb 17, 2010
Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N. I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel. Linksys support told me that the hardware was not compatible with the high channel.
View 3 Replies
View Related
Oct 10, 2011
To connect my new "smart tv" with my wireless linsys WRT610N, smart tv ask to take off all protection such as firewall and antivirus. Doing so, I cannot connect my laptop with my router. Is there a solution to connect both at the same time?
View 1 Replies
View Related
