Cisco Routers :: SRP527W - Bandwidth Shaping For Limiting Video And Audio Streaming
Sep 18, 2012How do I setup this on the SRP527W? I already block most of the video stuff on the internet. But I want to make this one more step.
View 1 Replies
ADVERTISEMENT
Audio And Video Streaming Server?
Mar 24, 2011Actually i need a streaming server that supports both audio(mp3) and video formats(mp4,avi..).But it should work in multicast and should possible to stream with VLC media player.now i'm trying helix media server.In this what are the procedures to configure helix sever in multicast.and how to stream media from it.Or Any other streaming server is there that suits for my need.
View 1 Replies View RelatedHome Network :: 4400n Dropping Connection When Streaming Video / Audio?
Jul 13, 2012I have been having a problem with my 4400n dropping connection when streaming video / audio.It is connected half duplex to a cat2950 and the media server is mediatomb on a linux box the client is a ps3 presently.
View 3 Replies View RelatedCisco Routers :: WRVS4400N Rebooting When Streaming Video
Aug 5, 2012I have a persistent any very annoying issue that the router reboots on it's own when I am streaming video from Netflix or other similar applications.
I read some reviews about this router which stated that this was a known problem, but apparently was resolved with latest firmware updates.
My router is new (less than 1 year). It came originally with the 2.0.1.2 firmware which I updated to the 2.0.1.3
That did not resolve the problem. So my question is, is there any aditional configuration necessary to stream video without interruptions, or, is this a hardware problem?
Cisco Routers :: RV220W Bandwidth Limiting?
Jun 4, 2013I have an RV220W which I would like to set bandwidth limiting on. When we upload files to yousendit or an FTP server, it saturates the connection and essentially stops any other traffic until the upload is finished. Looking at the manual, it looks like it should do this, but does not seem clear to me.
View 1 Replies View RelatedHow To Transmit Audio And Video To TV Wirelessly (UPNP)
Feb 17, 2011Is it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies View RelatedCisco Wireless :: Getting WAP4410N To Stream Audio And Video?
Sep 21, 2010I have the WAP4410n connected to a SLM2008. I tried to change to 100Mb the port in the switch but then I lost the connectivity.
But it's a giga port and it must work as a giga port. The new firmware must resolve the problem, and not to be a work around. Or what will be the next, not to use N, only G, or only 20MHz or...
I need the WAP4410n for streaming audio and video?
D-Link D-ViewCam :: DCS-932L Does Not Record Audio In Sync With Video?
Apr 16, 2011When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies View RelatedWireless :: Poor HD Video Streaming?
Jan 3, 2013Just got a new HD Smart TV and trying to stream Netflix and Youtube. Netflix works decent most of the time, buffering occasionally but Youtube buffers all the time and is not watchable. Using a Netgear WGT624 b/g router located some 60 feet away a half floor upstairs. Internet downstream speed is about 5.5 Mbps on the hard wired main computer and laptops show the same speed when connected wirelessly. Wireless Network Connection Status on a laptop close to the TV show "Very Good to Good" signal strength and Speed at 11 Mbps. Why is the Yotube connection so poor on the TV? The Netflix could be better too. Laptop by the TV streams Neflix and Yotube fine but of course that is not HD. Do I need an upgraded router or powerline network adapter?
View 1 Replies View RelatedWearable Video Streaming Device Using 3g?
Aug 24, 2012for some weeks now, Im searching for a solution to stream live video from a wearable device (glasses, headset) to a windows system for recording. Requirement is complete freedom from <span dir="auto">any LAN[CODE]
View 6 Replies View RelatedWhat Ports And Protocols Are Used For Streaming Video
Feb 6, 2013I am trying to setup the QoS for my router, and want to bump up the priority for streaming video such as Netflix, Youtube, and others... I am not certain what specific protocols and ports are used for streaming though. Googling Configure QoS for Youtube comes up with tons of long winded articles that never get to the point...
View 1 Replies View RelatedStreaming Video From Windows 7 To Xbox 360 - Pixelation / Lag
Feb 10, 2013I have been trying to stream videos from my PC to my Xbox 360 via the Windows Media Center app. I've got it all set up, my PC detects the 360 just fine and vice-versa. However, when I go into the app on the 360 and select the video to play, it plays it extremely pixelated. Usually it just freezes up on an extremely pixelated frame while the sound of the video continues on as normal. I've tried MP4, MKV, AVI, WMV, etc. all at multiple resolutions all with the same result.I can stream just fine via HBO, Netflix, Amazon, etc. so I don't think it is my network or internet speed. I've tried putting the 360 on a static IP, I've gone through all the FAQ from Microsoft about enabling Windows Services and the like, none of which has made a difference.I am able to stream to my PS3 just fine, so I am not sure what is going on with the 360.
View 3 Replies View RelatedD-Link DIR-655 :: Video / Streaming (NetFlix) Priority On It
Feb 21, 2011I am about to buy a NMP (WD Live Hub) to put my local video/music/pic content on and drive many TVs in my house. These NMP also have services like Hulu, NetFlix, etc. I plan to sign-up for NetFlix and do the unlimited streaming thing via the WD Hub. I have a 5Mbps broadband pipe which is right at the suggested level for HD streams.....but I think the DIR-655 can prioritize streams/video ?
plan to put the Hub on Static (Reserved) IP address on my network....however, I've never messed with a Router and prioritization. I assume it is something to do with the port(s) used, etc. I have no idea the ports that will be used by the Hub for NetFlix, how/where in the DIR-655 I can accomplish this how to ID the ports used would be great....eg. some variant of Netstat command, etc ?
D-Link :: DIR 615 - Live Streaming Video On Websites
Apr 13, 2013i've lost the ability to view live streaming video (adobe flash, i think) on several websites. it happened gradually over several weeks and now videos will not load. the dir-615 has functioned flawlessly over several years but it might be showing its age now. connecting directly to my com cast broadband modem fixes the problem. can i tweak the router settings or do i need to replace it?
my setup: dir-615, H/W Ver. E1, F/W Ver. 5.00NA, two wired connections to X Box's and one to Win 7 PC. wireless connections to several Win 7 laptops and other tablets/phones. com cast high speed broadband with their Norton security suite.
if replace.....i need a recommendation. the best bang for a buck while staying within a tight budget.
Cisco WAN :: How To Stop Video Streaming By 2621 Router
Dec 13, 2010I have some internet users who listen to online vedio music and and other streamin program so my network goes very slow and bandwidth consumtion is goes very high.in this situation i have no any firewall, how i can stop vedio streaming by cisco 2621 router.i have been configured to stop the bittorrent and it successfully done class-map match-any peer-to-peer match protocol gnutella match protocol kazaa2 match protocol fasttrack match protocol novadigm match protocol edonkey match protocol bittorrent match protocol rtp match protocol rtsp!!policy-map peer-to-peer class peer-to-peer drop?
View 2 Replies View RelatedCisco WAN :: 5510 Dynamic Bandwidth With Shaping
Mar 29, 2011We have an ISP connection that is connected via an ethernet interface on a 5510 ASA. We are allotted 10Mbps. I have currently have the interface set to 10Mbps Full. However we want to upgrade the connection to 25Mbps. I know I can set the port speed to 100Mbps and then set a shape/police statement and shape down to 25Mbps.
Management wants to be able to call the ISP and arbitrarily adjust that speed up temporarily at any time without any user/admin intervention on our side. I can simply leave the port at 100Mbps i.e. no shape statement on my side however I will run into problems with large amounts drops, overruns, retransmissions, etc due to the ISP shaping the connection speed during normal operations. However they then could then adjust the speed at any time without needing me.
I do not know the best way to make this work. Is there some sort of dynamic/smart shaper in the ASA or another cisco device?
Sony BDP-s580 / How To Setup Streaming Video From PC To Blu-ray Player
Feb 19, 2013Movies on external hard drive connected to desktop pc. Sony bdp-s580 player. The router is a Netgear wndr3700 v3. Sony bluray player connects to the internet with powerline networking device (hence not wireless)Or would it be easier to simply disconnect the usb hard drive from the desktop pc and connect it directly to the bluray player?
View 2 Replies View RelatedCisco WAN :: 3845 - Traffic Shaping For Bandwidth Management
Jun 1, 2011I am trying to get ride of an old traffic management appliance and would like to replace it by a simple Cisco 3845.
The configuration is really simple:
Customers -- Router 3845 -- Internet
I want to be able to provide bundles to customer such 64kps garanteed/ 2mbps MIR (retail) and 2mbps garanteed no MIR (business).
I need also to specify to the router the total internet bandwitdh available (example: 20mbps symetrical).
This configuration will work ? Should I worry about any performance issue if I start to have a lot of customers ?
ip access-list extended Cust1
permit ip any sub_Cust1
permit ip subCust1 any
Home Network :: Managed Switch Selection For Video Streaming?
Jul 27, 2011looking to pick a good managed gigabit switch for my central media server implementation.I will have probably 10-12 tvs connected to this along with other things like ip pbx extensions, music streamers, ip cameras etc.Now I can imagine about 2-3 tvs simultaneously streaming HD quality movies. In that case, I am assuming I will need a minimum 150-200mbps throughput switch. Is my assumption wrong?I have been looking at some switches which seem nice and relatively inexpensive but the throughput is much lower than that.If I wouldnt need that kind of throughput then can you explain me how do I come up with my max limit.I initially thought that since its going to be a gigabit switch it would be able to handle that kind of traffic through all its port at once, but I guess thats not a correct assumption. Throughput is what reall dictates simultaneous maximum? Am I correct?
View 1 Replies View RelatedHP Laptop DV2815EA - Wireless Adapter Cuts Out During Streaming Video
Sep 6, 2012My computer is a HP Laptop Model Number DV2815EA running windows vista 32 bit. Its a few years old. Recently i have had problems with my wireless adapter turning itself off whenever i watch videos online. It doesn't happen all the time, but if i am watching something for more than an hour it will cut off. There is a blue light and a switch on the front of the laptop, and when the wireless adapter is off, the light changes to red.
The light will change to red sometimes whilst watching video, and the only way i can turn the wireless back on is if i restart the system. Even if i activate and disable the wireless adapter using the external manual switch, or the internal controls using the wireless assistant. Also, not sure if this is relevant but i can no longer either watch videos on full screen as the image gets jolty.
Things i have tried:
1) restoring the system to a previous restore point - i tried this but for some reason the only restore points i could find were ones dated after i started noticing the problem.
2) reinstalling the wireless adapter driver and video card driver.
3) running a full 6 hour antivirus scan - I am using Eset NOD32 antivirus and also i scanned using comodo cleaning essentials.
Attempting To Connect A Video Streaming Device To Wireless Network
Dec 22, 2012I am attempting to connect a video streaming device to my wireless network and it will not accept what I think is the password
View 1 Replies View RelatedLinksys Wireless Router :: E3000 Won't Allow Streaming Of Some Video Contents
Jan 8, 2012I have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
View 6 Replies View RelatedLinksys Wireless Router :: Apple TV Video Streaming With EA4500
Nov 11, 2012I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop playing waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV?
View 9 Replies View RelatedCisco WAN :: 3750 / 6509 - Traffic Shaping VRFs WAN Bandwidth?
Jul 14, 2011We are a new medical school located in PA. Just have just completed a new building and are now working on getting our network finished. Here is the situation we have a 50MB Internet Connection that comes into our network that then hits the ISPs Cisco 3750 which sends it to two of our Cisco 3750s for redundancy. From the 3750 goes into our Cisco 6509 with a FWSM module, then out from there to our distribution switches which are all Cisco 2960s.
What we would like to do is to control how much WAN connectivity each of our VRFs get. Right now we have a Faculty, Student, and Research VRF formed, and are trying to figure out the best spot where we can say Faculty gets 30MB of Bandwidth, Students gets 10, and Research gets 10. If possible would like burst capabilities.
Limiting Bandwidth With Router?
Apr 7, 2011I live in rural Alaska and use satellite internet with 1.5mbps rate and 4gb rolling weekly download limit. I was wondering if there are any wireless routers I can buy that I can set a bandwidth limit for the specific router. Due to teenage girls in the house we hit the weekly limit in a day or two because of all the music videos and such that they watch on you tube, it is annoying getting limited to the 256kbps download rate so often.
View 5 Replies View RelatedSetup Bandwidth Limiting / Qos?
Mar 13, 2012I am a gamer living in my apartment with a room mate who loves to download music 24/7 and a girlfriend who loves to watch netflix. Needless to say, every time I go to play a video game I get shitty ping and lots of lag. From what I've gathered, DD-WRT's QOS is ****, and Tomato is the way to go in 3rd party firmware.
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 Video Streaming Lag From Media Server?
Mar 25, 2012When I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies View RelatedD-Link DIR-655 :: Intermittent Internet Connection Loss And Video Streaming Stopped?
Jan 10, 2012I am having wireless connection/internet issues that are irritating me to the core!!! I have called tech support 4 times now, and I still can't get everything to play nice...I have the 655 set up as a wireless router to a Windows 7 laptop, one iPad, two iTouches, and one N3DS. I can't find a setting that will work with all devices. Here are the senarios...
1) Settings: Wireless enabled, 802.11n only, Auto Scan off-channel set to 1, Best Transmission rate, Channel Width Auto 20/40, Visible, Auto WPA Mode with AES Cipher and a pre-share key. This yields fantastic results with my laptop, it can stream video for entire episodes, and I have no problems with loading webpages in either IE or Firefox. However, it does not support the kids iTouches or N3DS.
2) Changed the above to mixed 802.11n/g AND ALSO tried 802.11 only: iTouches work and can connect to the internet, but laptop doesn't like it. I get "Problem loading webpage" every other time I access and website, and streaming stop every 5-6 minutes. Bars indicate wireless signal is strong, but intermittently get that yellow triangle.
Cisco Switching/Routing :: Bandwidth Shaping Two Links With 2921 Router
Dec 12, 2012I have 2 links to 2 different departments switch with an up link of 10mb. I want to guarantee that both departments get at least 5mb, but can use part of the other 5mb that not in use. Is this possible?
View 3 Replies View RelatedBandwidth Limiting On Home Network?
Jun 11, 2011Without using another box as a router preferably. My Cisco Linksys router doesn't have any options for this but I heard you could possibly install some 3rd party firmware to get around that. This would be a last resort for me What I'm hoping for his some piece of software that could do this
View 2 Replies View RelatedCisco WAN :: 2811 - Limiting Bandwidth In GRE Tunnel?
Jun 10, 2013We have two Cisco 2811 Routers setup with a GRE tunnel that we would like to constrain the bandwidth on to replicate a satellite connectinon of 400 kbits. We tried the bandwidth command 400, but from what I understand that is only for routing metrics and not actual speed of the interface.
View 5 Replies View RelatedCisco Switches :: To Do Bandwidth Limiting By IP Address Sg 300
Apr 13, 2011I have a SG 300-20 small business switch and I would like to restrict bandwidth by gateway ip address but not by physical port or LAG. On the web interface, I can only do bw limiting per port or lag. I want to do bandwidth limiting by the IP addresses that I assign to vlans that my hosts use as a gateway ip.
View 3 Replies View RelatedCisco WAN :: Limiting Incoming Bandwidth On ASA5510
Feb 6, 2012I have a Cisco ASA5510 with two Cisco Catalyst 3560G switches plugged into it. Then I have 2 Cisco1400 Aironet WAPs plugged into the switches.
My goal is to limit incoming bandwith for two specific vlans. So users who are plugged into the switch or connected to the wifi can't go bandwidth crazy.
The rule I currently have setup on the ASA5510 is limiting internal bandwidth, I know shame on me.
So how do I setup a rule on the ASA5510 that will limit users external traffic on vlans without limit internal lan traffic?