I am trying to setup the QoS for my router, and want to bump up the priority for streaming video such as Netflix, Youtube, and others... I am not certain what specific protocols and ports are used for streaming though. Googling Configure QoS for Youtube comes up with tons of long winded articles that never get to the point...
View 1 RepliesJust got a new HD Smart TV and trying to stream Netflix and Youtube. Netflix works decent most of the time, buffering occasionally but Youtube buffers all the time and is not watchable. Using a Netgear WGT624 b/g router located some 60 feet away a half floor upstairs. Internet downstream speed is about 5.5 Mbps on the hard wired main computer and laptops show the same speed when connected wirelessly. Wireless Network Connection Status on a laptop close to the TV show "Very Good to Good" signal strength and Speed at 11 Mbps. Why is the Yotube connection so poor on the TV? The Netflix could be better too. Laptop by the TV streams Neflix and Yotube fine but of course that is not HD. Do I need an upgraded router or powerline network adapter?
View 1 Replies View RelatedActually i need a streaming server that supports both audio(mp3) and video formats(mp4,avi..).But it should work in multicast and should possible to stream with VLC media player.now i'm trying helix media server.In this what are the procedures to configure helix sever in multicast.and how to stream media from it.Or Any other streaming server is there that suits for my need.
View 1 Replies View Relatedfor some weeks now, Im searching for a solution to stream live video from a wearable device (glasses, headset) to a windows system for recording. Requirement is complete freedom from <span dir="auto">any LAN[CODE]
View 6 Replies View RelatedI have been trying to stream videos from my PC to my Xbox 360 via the Windows Media Center app. I've got it all set up, my PC detects the 360 just fine and vice-versa. However, when I go into the app on the 360 and select the video to play, it plays it extremely pixelated. Usually it just freezes up on an extremely pixelated frame while the sound of the video continues on as normal. I've tried MP4, MKV, AVI, WMV, etc. all at multiple resolutions all with the same result.I can stream just fine via HBO, Netflix, Amazon, etc. so I don't think it is my network or internet speed. I've tried putting the 360 on a static IP, I've gone through all the FAQ from Microsoft about enabling Windows Services and the like, none of which has made a difference.I am able to stream to my PS3 just fine, so I am not sure what is going on with the 360.
View 3 Replies View RelatedI am about to buy a NMP (WD Live Hub) to put my local video/music/pic content on and drive many TVs in my house. These NMP also have services like Hulu, NetFlix, etc. I plan to sign-up for NetFlix and do the unlimited streaming thing via the WD Hub. I have a 5Mbps broadband pipe which is right at the suggested level for HD streams.....but I think the DIR-655 can prioritize streams/video ?
plan to put the Hub on Static (Reserved) IP address on my network....however, I've never messed with a Router and prioritization. I assume it is something to do with the port(s) used, etc. I have no idea the ports that will be used by the Hub for NetFlix, how/where in the DIR-655 I can accomplish this how to ID the ports used would be great....eg. some variant of Netstat command, etc ?
i've lost the ability to view live streaming video (adobe flash, i think) on several websites. it happened gradually over several weeks and now videos will not load. the dir-615 has functioned flawlessly over several years but it might be showing its age now. connecting directly to my com cast broadband modem fixes the problem. can i tweak the router settings or do i need to replace it?
my setup: dir-615, H/W Ver. E1, F/W Ver. 5.00NA, two wired connections to X Box's and one to Win 7 PC. wireless connections to several Win 7 laptops and other tablets/phones. com cast high speed broadband with their Norton security suite.
if replace.....i need a recommendation. the best bang for a buck while staying within a tight budget.
I have some internet users who listen to online vedio music and and other streamin program so my network goes very slow and bandwidth consumtion is goes very high.in this situation i have no any firewall, how i can stop vedio streaming by cisco 2621 router.i have been configured to stop the bittorrent and it successfully done class-map match-any peer-to-peer match protocol gnutella match protocol kazaa2 match protocol fasttrack match protocol novadigm match protocol edonkey match protocol bittorrent match protocol rtp match protocol rtsp!!policy-map peer-to-peer class peer-to-peer drop?
View 2 Replies View RelatedI have a persistent any very annoying issue that the router reboots on it's own when I am streaming video from Netflix or other similar applications.
I read some reviews about this router which stated that this was a known problem, but apparently was resolved with latest firmware updates.
My router is new (less than 1 year). It came originally with the 2.0.1.2 firmware which I updated to the 2.0.1.3
That did not resolve the problem. So my question is, is there any aditional configuration necessary to stream video without interruptions, or, is this a hardware problem?
Movies on external hard drive connected to desktop pc. Sony bdp-s580 player. The router is a Netgear wndr3700 v3. Sony bluray player connects to the internet with powerline networking device (hence not wireless)Or would it be easier to simply disconnect the usb hard drive from the desktop pc and connect it directly to the bluray player?
View 2 Replies View Relatedlooking to pick a good managed gigabit switch for my central media server implementation.I will have probably 10-12 tvs connected to this along with other things like ip pbx extensions, music streamers, ip cameras etc.Now I can imagine about 2-3 tvs simultaneously streaming HD quality movies. In that case, I am assuming I will need a minimum 150-200mbps throughput switch. Is my assumption wrong?I have been looking at some switches which seem nice and relatively inexpensive but the throughput is much lower than that.If I wouldnt need that kind of throughput then can you explain me how do I come up with my max limit.I initially thought that since its going to be a gigabit switch it would be able to handle that kind of traffic through all its port at once, but I guess thats not a correct assumption. Throughput is what reall dictates simultaneous maximum? Am I correct?
View 1 Replies View RelatedMy computer is a HP Laptop Model Number DV2815EA running windows vista 32 bit. Its a few years old. Recently i have had problems with my wireless adapter turning itself off whenever i watch videos online. It doesn't happen all the time, but if i am watching something for more than an hour it will cut off. There is a blue light and a switch on the front of the laptop, and when the wireless adapter is off, the light changes to red.
The light will change to red sometimes whilst watching video, and the only way i can turn the wireless back on is if i restart the system. Even if i activate and disable the wireless adapter using the external manual switch, or the internal controls using the wireless assistant. Also, not sure if this is relevant but i can no longer either watch videos on full screen as the image gets jolty.
Things i have tried:
1) restoring the system to a previous restore point - i tried this but for some reason the only restore points i could find were ones dated after i started noticing the problem.
2) reinstalling the wireless adapter driver and video card driver.
3) running a full 6 hour antivirus scan - I am using Eset NOD32 antivirus and also i scanned using comodo cleaning essentials.
I am attempting to connect a video streaming device to my wireless network and it will not accept what I think is the password
View 1 Replies View RelatedI have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
View 6 Replies View RelatedI am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop playing waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV?
View 9 Replies View RelatedI have been having a problem with my 4400n dropping connection when streaming video / audio.It is connected half duplex to a cat2950 and the media server is mediatomb on a linux box the client is a ps3 presently.
View 3 Replies View RelatedWhen I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies View RelatedI am having wireless connection/internet issues that are irritating me to the core!!! I have called tech support 4 times now, and I still can't get everything to play nice...I have the 655 set up as a wireless router to a Windows 7 laptop, one iPad, two iTouches, and one N3DS. I can't find a setting that will work with all devices. Here are the senarios...
1) Settings: Wireless enabled, 802.11n only, Auto Scan off-channel set to 1, Best Transmission rate, Channel Width Auto 20/40, Visible, Auto WPA Mode with AES Cipher and a pre-share key. This yields fantastic results with my laptop, it can stream video for entire episodes, and I have no problems with loading webpages in either IE or Firefox. However, it does not support the kids iTouches or N3DS.
2) Changed the above to mixed 802.11n/g AND ALSO tried 802.11 only: iTouches work and can connect to the internet, but laptop doesn't like it. I get "Problem loading webpage" every other time I access and website, and streaming stop every 5-6 minutes. Bars indicate wireless signal is strong, but intermittently get that yellow triangle.
So I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server. When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x
View 5 Replies View RelatedVideo streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies View RelatedHow do I setup this on the SRP527W? I already block most of the video stuff on the internet. But I want to make this one more step.
View 1 Replies View RelatedWe have just acquired a cisco profile 42 video conferencing equipment and am required to open ports for SIP and H232, any pointers on hw that can be acquired i have a cisco ASA 5510, Some one told me to open port 16384 but i need pointers on how to do it becuase I already set an access list to any.
the config
Internet -> ASA 5510 -> Switch -> Profile 42 and other devices
I use one cisco 6506-e switch with modules (including two sup720-3B,one 6148-GE-TX,one 6724-SFP), and Thomson ViSE EM1000 encoder connect to 6148-GE-TX module with its two Gigibit RJ45 ports,Video picture can appear,but it isn't active.If connect to 6724-SFP module with GLC-T transceiver,It is OK. configure speed 1000 on the 6148 interface? configure full-duplex on the 6148 interface?
View 2 Replies View RelatedWhere can I find a document that list and describes all the PPS associated with CiscoPrime LMS 4.1 and later?
View 2 Replies View RelatedOur College uses Ethernet connexion for its students with the IPv4 Address of each machine configured using DHCP (not manually). In order to prevent students from playing certain online videogames some ports are blocked for all machines on the network, but they can be manually untagged (ie for competitive play). The problem occurred when we tried to untag the ports to allow online games on this machine. After the allowed ports were modified, the machine refused to assign an IP adress to itself - no matter how many times we try to renew the DHCP Lease. Restoring the previous set of allowed ports fixes the problem, but doesn't allow for online play.
config: OS X 10.8.2 with nothing fancy. Other machines on the network do no experience this problem.
why the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies View RelatedWe have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies View RelatedIs there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.
How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies View RelatedOne of techs accidentally connected two access ports from different switches together. Since then, LMS is alerting them as being Link ports down. I tried to default the config and set them to access ports without any success. what I should do in LMS to recognize them as access ports?
View 2 Replies View RelatedI have some 1080p video files on my PC. Since my PC isn't powerful enough to play the files smoothly, I have been streaming the content to my PS3 using Windows 7 media sharing.
This works well with no noticeable loss of quality.
My problem is that I have to go into the services on my PC and restart the WMPNetworkSvc service every time I switch the PS3 on, otherwise the PS3 doesn't detect the PC.
how to make this a permanent arrangement?
Everyone speaks about video and music streaming, however I am under the understanding that there isint actually any such thing as legitimate real time streaming, ALL files are saved to the disk or the RAM. If this was not the case, disrupting your Internet connection would cause an instantaneous crash of the streaming media, and well, I have had my Internet crash a lot of times while viewing streaming median and in every case it continued to play for some time.
View 5 Replies View RelatedWe have a server with lots of home videos on. We currently run HFS so that the files can be accessed by anyone on the home network and download them.
What software would I use to be able to stream the videos in realtime through a browser?