Cisco :: Ports / Protocols / Services Associated With LMS 4.1?
Jun 4, 2013Where can I find a document that list and describes all the PPS associated with CiscoPrime LMS 4.1 and later?
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: WS-C6509-E - Verification Of Services And Protocols
Sep 19, 2012Network newbie need to verify all necessary services and protocols on a new WS-C6509-E are turned on. This layer 3 switch will be used to connect to servers.
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI9, RELEASE SOFTWARE (fc2)
[Code]....
Cisco Switching/Routing :: Open Specific Ports On 1941w Integrated Services Router
Apr 20, 2013open specific ports on 1941w Integrated Services Router.This specific router is a wireless VPN router that has a wired module and a wireless module and VPN so I'm getting 3 subnets on my network - 192.168.1.. for the wired connections, 10.100.1.... for wireless LAN connections and 10.100.2... for VPN remote connections.I know that by default all connected computers can access my Linux server data through telnet so the telnet port is open by default, the problem is that I have some other software licensing system on my Linux box that needs to be accessed through port 27000 and most of my users are using wireless connections and can't access that license because post 27000 is closed.what is the comand to open this post or any other port that I need to be open on the wired module, wireless module and VPN or at least poit me to somewhere where I can find all the commands that I can use for this router?
View 6 Replies View RelatedWhat Ports And Protocols Are Used For Streaming Video
Feb 6, 2013I am trying to setup the QoS for my router, and want to bump up the priority for streaming video such as Netflix, Youtube, and others... I am not certain what specific protocols and ports are used for streaming though. Googling Configure QoS for Youtube comes up with tons of long winded articles that never get to the point...
View 1 Replies View RelatedProtocols / Routing :: Machine Refusing Untagged Ports
Mar 14, 2013Our College uses Ethernet connexion for its students with the IPv4 Address of each machine configured using DHCP (not manually). In order to prevent students from playing certain online videogames some ports are blocked for all machines on the network, but they can be manually untagged (ie for competitive play). The problem occurred when we tried to untag the ports to allow online games on this machine. After the allowed ports were modified, the machine refused to assign an IP adress to itself - no matter how many times we try to renew the DHCP Lease. Restoring the previous set of allowed ports fixes the problem, but doesn't allow for online play.
config: OS X 10.8.2 with nothing fancy. Other machines on the network do no experience this problem.
Why WAN Protocols Like Frame-relay / HDLC And PPP Are Called Layer2 Protocols
Aug 20, 2011why the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies View RelatedCisco Firewall :: ASA 5505 / Use The Ethernet Ports As Pure Physical Layer 3 Ports
Jun 9, 2013We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies View RelatedCisco Firewall :: ASA5555-X - Spare Ports Into Access Ports?
May 14, 2013Is there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.
Cisco WAN :: How Many Of 881 Switch Interface Ports Can Be Used As Router Ports
Aug 7, 2011How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies View RelatedCisco :: Changing Link Ports To Access Ports In LMS 4.1?
Feb 2, 2012One of techs accidentally connected two access ports from different switches together. Since then, LMS is alerting them as being Link ports down. I tried to default the config and set them to access ports without any success. what I should do in LMS to recognize them as access ports?
View 2 Replies View RelatedCisco :: LMS 3.2 Services Do Not Start
Oct 26, 2011LMS does not start, although the services seem to be started. Find attached the pdshow output and let me know what more you need me to send.
View 3 Replies View RelatedRun Two Services At Same Time
Apr 7, 2011I am running Wondows XP OS and have 2 NIC's in it. One is connected with DSL and other is with LAN of my Network. By using CCProxy 6.4.1 I am running the Internet on my LAN. I also want to run CCTV camera Sevice and want to share it on LAN as I share Internet on LAN but Camera Service Packets do not route on LAN but routhe when i disconnect the DSL Connection. So what i have to do to run both services (internet + camera service) smoothly.
View 1 Replies View RelatedCisco :: LMS 3.2 Common Services Error
Nov 2, 2011I am facing a problem with my LMS 3.2 server. Suddenly I found there is no device reflecing in common services-> device management as well as RME also. I restarted LMS services, server multiple time, reseted casuser, demoted the server from ACS mode to local mode but no luck. However in "dcrcli" i can see all devices and exported all devices to CSV file.
After this I restored from a backup 3 month old when devices were reflecting under common server and RME device management. this also not resolved the problem.
I uninstalled LMS, performed system cleaning and reinstalled LMS 3.2. Then I imported the devices from CSV file i had. Now also the problem not got resolved . I can see devices in dcrcli but none of the device is reflecting under device management of any module.
In Dcmaservice.log i found the error" ERROR,[main],com.cisco.nm.rmeng.config.netshow.server.admin.NSCommandSetManager,getAllCommandSet,8661,Invalid MDF data file:D:/CSCOpx/lib/classpath/com/cisco/nm/cwcs/mdf/mdfdata.xml"
Hence I restored teh mdfdata.xml file from another server. However now i can see the following errors
1) in common service -> software center -> device updae -> device count are 0 for all module
2) no device is reflecting under any module
3) one progress i saw when tring to add any device if selecting device type, it is showing me the list of device type along with OID. before restoring mdfdata.xml it was also not comming.
Cisco :: LMS 4.0.1 - Telnet From Topology Services Map
Dec 19, 2011On a LMS 4.0.1 :I want to know what is the right way to change the telnet program on the campus mgr map (topology services map), when right-clicking a device icon and selecting telnet.I would like to use a tool of mine, and not to launch a telnet command from the IE browser.I changed the default telnet of Windows in the registry, but the program is still launched as a telnet URL in the browser and this is not what I would like to do.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 Configuration Web Services
Feb 20, 2013I am trying to do a query, according to chapter 4 in the ACS 5.3 Secure Access Control System 5.3
doing a PUT request have a header of Content-Type: application/xml and my payload is: [code] All I want to do is get a list of users who belong to that group?
Cisco WAN :: Running BGP On WS-C3750X-24T-S Using IP Services IOS?
Apr 10, 2012Im planning to install a WAN Switch on our network basically this WAN switch will be the core WAN switch in our WAN segments where all WAN connections coming in and will use EBGP peering to every CE WAN router.
is Advanced BGP supporeted in WS-C3750X-24T-S?
Can't Get Other Services To Forward Through IP Tables
Apr 3, 2012A fair while ago I setup a transparent proxy server running Opensuse (think it was version 10.2), it worked perfectly, cached the http traffic and still allowed https, and other services to be accessed. However the drive in it died so its being setup again.I've got squid running transparently just fine, but I can't get the other services to forward through IP tables.. I know i can't cache HTTP - and nor do I want to. I thought from memory that I had the default option for the sections in iptables to "ACCEPT", and just had rules to redirect the http traffic to squid. However that's exactly what I've got now - and I can't access anything other than port 80.I have Google it and i'm getting so many varied responses people telling saying it can't be done, others saying you have to add a rule for every other port.
View 1 Replies View RelatedCisco :: LMS 4.0.1 Topology Services Not Running On Windows 7?
Sep 19, 2011I installed LMS 4.0.1 and every module works from the local server. Http login from a remote system, topology services does not start, complains about java version. I followed the link to install the java version, it then complains about some Ansiserver stuff.
the client os is win7 64 bits, eplorer version is 7.
Cisco AAA/Identity/Nac :: Acs 5.3 - Moving Between Access Services?
Jul 4, 2012Currently trying to set up the above so that if an access service is not matched then it will go to the next one. Looking at the logs what happens is - our auth is set to AD so it matches that - then it isnt in the correct ext AD group and goes to default deny access.
Cant see how to get around this - the only continue command is in the advanced area of the auth - but i cant set up ext ad groups on the auth. How do i get this to move between access services if it doesnt match the ext AD.
Cisco :: Unable To Launch Topology Services LMS 4.0
Nov 7, 2011When i try to launch topology services in LMS 4.0 i get prompted to install a java plugin. When i install this it tells me to restart the browser but nothing is changed, it asks me if i want to install the java plugin again.
View 7 Replies View RelatedCisco Routers :: RV220W VLAN Services From ISP?
Sep 7, 2011My ISP sends various services through VLAN. Internet, TV and Telephone.Now I wonder, is it possible to use this router to distribute these VLANs through the wan port to eg my IPTV box?
View 5 Replies View RelatedCisco Firewall :: ASA 5505 / Dual WAN For Different Services?
Sep 18, 2012I have ASA 5505 ver, 8.4(1) I have configured 2 WAN links to
1. Outside1 - distance metric 50
2. Outside2 - distance metric 20
Currentry all traffic is passing thru Outside2 and it's correct, also s2s and ra VPN is also running on Outside2 ?My current case is to use Outside1 for webvpn services only. I can't use Outside2 becouse on 443 port other services are running, also I cant change webvpn port to other.
How can I match packets incoming to interface Internet1 from Interner side nad route them back thru Internet1 interface.
IPSLA is not a good solution becouse I need to have both WAN links used Now in routing table I have only onre record
S* 0.0.0.0 0.0.0.0 [20/0] via x.x.x.x, INTERNET2
for link with lower metric, but after some problems with provider for link Internet2 routing has changed for Internet1 and didn't change it back after resolving problem? how to create it for all traffic incoming for Internet1 interface from outside?
Cisco :: 5.1 Secure Services Client (SSC) For Windows 7
Dec 8, 2010The organization that I worked for purchased large number of Cisco Secure Services Client Licenses for Windows XP. Now they have plans to move to Windows 7. Reading different discussions, I know that SSC ver 5.1 does not work with Windows 7. My questions are:
1) Will there be a new SSC for Windows 7? Will we be able to configure the pre-package for installation with the new SSC?
2) Can we use the existing SSC ver 5 licenses with the new SSC for Win 7?
Cisco Routers :: RV 220W - Custom Services And QOS
Aug 9, 2012I have some questions regarding the addition of custom services and their use in QoS for RV routers (I use the RV220W). Suppose I create a custom service as:
Name: My Service
Port: TCP 60000
1. Does this port number refer to the port number used by my LAN computer or the port number on the other side e.g. some computer on Internet I am using this service to connect to? Some services use the same port number on the side that initiates the service and the receiving end but there are services that use different ports for the initiating and receiving end. So, what is the meaning of the port number when creating a custom service?
LAN Computer : (port TCP 60000) <----> Internet computer : (some TCP port, not necessarily 60000) - or -
LAN Computer : (some TCP port, not necessarily 60000) <----> Internet computer : (TCP port 60000) ?
2. Suppose I create a QOS profile binding configuration with respect to this custom service for a specific IP address on my LAN. QOS is applied to the outgoing network traffic only. How is this profile going to work?
A. Applied to traffic originating from my LAN device with the specified IP address and port TCP 60000 - or -
B. Applied to traffic originating from my LAN device with the specified IP address to another computer's port TCP 60000 ?
Cisco Firewall :: Consolidating Services On ASA5520
Jun 23, 2012I have 3 ASA5520, 2 of them running as remote access VPN, 1 of the ASA as site to site VPN. There are 2 different ISP's which are used between them. Can I consolidate all these services in 1 ASA5520, relating to configuration and whether the ASA could handle these services together without performance degradation. I forgot to mention even e-mail service and Internet browsing is also though one of the ASA. I was just wondering whether the configuration will get messy or is there a different approach to go about it. The OS on ASA's is 8.3.
View 1 Replies View RelatedCisco VPN :: 867w And Advanced IP Services Required
Aug 11, 2011Does the Cisco 867w ISR router has an IOS with the Advanced IP Services? I need to use this router with Amazon VPC and BGP is required, where the Universal IOS does not accommodate BGP.
View 5 Replies View RelatedSpecific Connection To Use For Certain Websites Or Services?
Nov 13, 2011I hope this question has not been asked here in the past, as I have googled for answers many times..I live in UAE and the ISP here blocks many sites and services which made me do the following:I have a notebook PC running WindowsXP with two connections to the internet.LAN connected to my ISP which is 30mb/sWLAN connected to the internet through DD-WRT router running OpenVPN and the speed is not that fast.hat I do now is that I have to disable my LAN and access the internet through WLAN (VPN) and have to enable LAN again whenever I need to download large files
View 5 Replies View RelatedTerminal Services On Server 2008
May 26, 2011I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies View RelatedConnecting To Different Online Services And Games
Jan 14, 2013Problems connecting to different online services and an online game.Examples:
1.) "Connection timed out" in Teamspeak 2. (debug log not really yielding much useful information).
2.) Torchlight 2 reported "Connection failed - Firewall errors detected."
almost all other online applications work just fine (including voice over ip and games)What I've tried (without any success):
1.) I could connect in either case using my old laptop! Thus it works on a different computer, from the same network, at the same/similar time. Thus I concluded it must be somehow related to this laptop (its a new laptop).
2.) The TS2 server & entered information is 100% working, same applies to torchlight2 - also latest updates installed and of course the game is totally legal.
3.) Windows firewall: all the mentioned programs are on the allowed list. Also check whether its correctly set to "home network". Futhermore I also tried disabling the windows firewall entirely.
4.) No other firewall program in use.
5.) Check all programs I know of which might be related to network traffic (e.g. Qualcomm Atheros Killer Network Manager - disabled it).
6.) Tried both, wireless and ethernet cable connection.
7.) Tried all common solutions from similar problems from the forums of the affected programs (e.g. teamspeak2 and torchlight 2 forums).
8.) I even tried running the game, torchlight 2, via Tunngle (explained in a layman's words: a program that simulates Lan over the internet).
Its a new laptop. Network card is labled as "Killer e2200 PCI-E Gigabit Ethernet Controller.Runs Windows 7 and did start out empty: i.e. I installed every single program running on the machine and as far as I know none of them should have anything to do with network. Virus scanner is the lastest version of AVG free (no firewall included).
Connect Two Different Internet Services On One Network?
Jul 5, 2011i want to connect two different internet connection on one network?i have on wi-tribe internet connection and one super net internet connection and i want to connect these to internet services on my one company network.
View 1 Replies View RelatedWorkstation Services Won't Start Windows 7?
Feb 18, 2013a workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.
View 2 Replies View RelatedServers :: How To Activate WampServer Services
Apr 9, 2013I have downloaded the WampServer, however it is indicating that one of MySQL's Apache didn't Active yet. So how to activate all of the WampServer's services.
View 1 Replies View RelatedCannot Access Google Sites Or Services?
Feb 17, 2012I cannot access google sites or services in any browser, tried Chrome, IE and firefox.I'm running Windows XP SP3. I can ping Google without issue. My hosts file is clean and I checked in the registry to make sure that the hosts file is where it is supposed to be. I had trouble finding one that worked but I configured Chrome to use an external proxy and it seemed to work, abeit too slowly to really tell. I did manage to get a Nigerian google page up though.I've flushed the DNS and switched to the free google DNS.Looking around I've seen similar issues with people using Linksys routers. I am not using a Linksys router. I am currently using my android phone as a hotspot.I am running a Windows 7 laptop on the same network with no issues and booting the same host into Vista also works fine.
View 15 Replies View Related
