I cannot access google sites or services in any browser, tried Chrome, IE and firefox.I'm running Windows XP SP3. I can ping Google without issue. My hosts file is clean and I checked in the registry to make sure that the hosts file is where it is supposed to be. I had trouble finding one that worked but I configured Chrome to use an external proxy and it seemed to work, abeit too slowly to really tell. I did manage to get a Nigerian google page up though.I've flushed the DNS and switched to the free google DNS.Looking around I've seen similar issues with people using Linksys routers. I am not using a Linksys router. I am currently using my android phone as a hotspot.I am running a Windows 7 laptop on the same network with no issues and booting the same host into Vista also works fine.
MY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 126.96.36.199 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.
Everytime i try to go to a site that uses a google server, i get the message "The server at www.google.com can't be found, because the DNS lookup failed. DNS is the web service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network."
My computer won't connect to any of Google's servers. ANY of them. Gmail, docs, reader, nothin. I can visit youtube, but I cannot get to the log-in page. EVERY other site works pretty well. Heck, even using a site that uses a Recaptcha it doesn't load the recaptcha!Nothing wrong with my hosts file.
Tracert results in 6 successful hops and then times out (I think at my ISP?) the last 2 successful hops are chnddsrj01-ae2.0.rd.ph.cox.net And then langbprj02-ae2.rd.la.cox.net Then all time outs
My other PC is connected to the SAME wifi network right now, and I'm posting from it, and it works fine. Both are on XP. Reboots haven't worked. Happens on all browsers. Every other website I can find is just fine.
I have a WRT54G that has worked fine for years, with some PCs hooked up with Ethernet and various other devices connected wirelessly. I came home this afternoon and nothing going through the router could connect to the internet. I've made no changes to anything recently.
I did troubleshooting with Comcast, and we determined that when their modem was hooked up directly to my computer then that computer could connect to the net. Problem solved as far as they are concerned--my router is busted. But I can still connect to the router, and enter its admin screen, and everything looks fine there. The computers on the router can all see each other. So the router is working.
Once I hooked it back up to the modem my computers all lost their internet, but the router does get an IP successfully from Comcast. And it even assigns IPs to my computers that are hooked up to it. It's just that for some reason they still cannot get past the router.I used the ping function in the router admin site and the router pinged Google no problem. My PCs can ping the router without difficulty. But the computers cannot ping Google.
I've tried every combination of power cycles and reboots you can name. I've tried duplicating the MAC address of the PC that connected to the internet onto my router. None of it has made any difference.
My computer connects to my institute LAN.They provided us a configuration according which I configured TCP/IP v4 settings and firefox settings.All the webpages open smoothly but other internet realted services apart from firefox are not working eg Skype,Windows Update,Mu Torrent etc.The LAN connection says "No Internet access"(The sites are opening nicely though) and puts a yellow exclamation marks on the LAN symbol in system tray.
i have a WD My Book Live and it's connected to my DIR-825. i'd like to configure the router to allow FTP access to the NAS from the internet. the drive has an option to enable FTP in it's configuration, but i have not done this before and i don't know what to do to create a solid/secure FTP portal so that i can access my files remotely.how do i configure the router for this ? my router is set to DHCP and i have turned MAC filtering on.. in particular i am looking for the ability to transfer/copy files from the drive, and not allow any modification/writing to the drive from the outside.
Currently trying to set up the above so that if an access service is not matched then it will go to the next one. Looking at the logs what happens is - our auth is set to AD so it matches that - then it isnt in the correct ext AD group and goes to default deny access.
Cant see how to get around this - the only continue command is in the advanced area of the auth - but i cant set up ext ad groups on the auth. How do i get this to move between access services if it doesnt match the ext AD.
I noticed that I cannot remotely check the Topology Services in Ciscoworks LMS 3.2. I have attached a screenshot of the error for reference. When I access Topology Services on the server itself, everything works well.
I need to know how WLC can support ISE guest management in wireless mode. Tested and confirm by Cisco SE, Knowing that WLC currently does not support dynamic VLAN authorization for central web authentication. This limitation will be addressed in WLC 7.2 when MAB and CWA support is added to the code. On the other hand, DACLs on the other hand works and we can use that to restrict access of this guest traffic.Can ISE support on WLC LWA guest access provision? This able to view guest user login and show at ISE monitoring.
I am going to hook my laptop directly up to my wireless router via ethernet. I will be showing them security, SSID, etc. My issue is when I put in my WAN and LAN settings. What exactly is the difference between a WAN address and a LAN address.I kept my Lan address that same as the router. 188.8.131.52.I create WAN addresses as 184.108.40.206 with subnet mask as 255.255.255.000 abut not sure what to put in for my gateway. Logic say 198.162.128. 1; however that doesn't work.I then configured my tcp/ip to reflect this. Although I can always access my router website, I cannot access any other web sites.
So I had trouble connecting to some sites before like apple and such right? No big deal, just one site. Probably down. Then more and more.I got worried, then figured it was my ISP and went to neighbor to check. No. It wasn't. I ran home and checked my router, googled it before all my internet went down. I read something about UPNP being enabled and so after my internet was down, I went and checked, it was, disabled it.
access https sites from my PC? I cannot access these sites from IE 9 nor Firefox 6. I even disable firewall to try getting access to the secured websites but to no avail. But this problem recently cropped up when i upgraded my PC from XP to Windows 7.
Our office is running a DELL Poweredge server2 xeon processors16 GB memory5 RaiddrivesVM WARE with 3 virtual machinesOne of the VM's handles our DNS with is our main server second is an exchange server third is a sequal applicaioas of recent we have notice a few website sites we cant access (municipalities of which we access tax info) we need to visit on a regular basis. and it only seem to be just the 3 or 4 that are closest to us. Othe area communities we can access fine. All we get is a page cannont be displayed.The sites works outside our office or on our phones.[CODE]
I cannot access http sites unless I manually write the prefix https. The issue is mainly on Wordpress blog pages and I have to keep writing https if I want to access other blogger's page.For the time being I am using Chrome's extension "Https Enforcer" which slows down my browsing speed but eventually the sites open. I have to disable it if I have to use google images. I use windows 7, Chrome browser, Pocket Modem.
I would like to know if there is a possibility to create 2 Remote access VPNs for 2 ASA situated in different sites and using only one PCF file.Is set up a tunnel between the 2 ASA the only way to reach the 2 destinations with the same PCF file?
when my Linux VM is running!How's this for a mystery - last night I noticed that I could no longer access my gmail. Thought it might be down. This morning, I still couldn't access it. Thought I would try comcast, no joy either. Changed computers, no difference. Changed routers, no difference. Bought a new router and started plugging in network cables one at a time. My main machine first, everything works - http and https sites, a second computer, all good. The switch. Fine. Powerline. Still good. Then I plug in a Windows server running a Linux VM. Https sites on all the other machines stop working. Pause the Linux VM, restart router - https sites return to life. Went to Linux machine, re-enabled ipv6 (the only recent change on the Linux machine was to disable ipv6 since upon a reboot, Linux didn't have an ipv4 address). Restart Linux everything seems fine. A few hours go by, try to connect my wife's new laptop and at that moment wireless seems to stop. Restart router, wireless is back. But lo and behold, https is gone again. Unplug the machine that has the Linux VM, restart router, all is good.Ever see anything this weird?
I am trying to block access to facebook and twitter on my router, to a certain range of ips, 192.168.1.8 - 254. I have been digging around and trying stuff but all I do seems to restrict everyone access to the internet.
Our secondary site accesses the internal intranet via a link, which is basically:
[URL] where externalip is the IP address of my router.
* This used to work fine before we migrated from ADSL (6mb up / 0.5mb down) to Fibre(70mb / 20mb) *
Internally, I access the same link, but via [URL] Internally it loads in 2 seconds, externally it is taking 68seconds(ish)..
I can't work it out, the fibre shouldave made things loads quicker but is infact very slow. I'm wondering if something network wise is going on.
The intranet is a php intranet sitting on apache, and using postgresql as the database. Other pages load fine, this specific index.php page does quite a lot of DB connections and so on, but as I say before, it worked fine before the migration.
i have a problem with some sites! i cant access to them ! some sites are hotmail, this one, and many other! the msg that i see every time is : There is a problem with this website's security certificate. The security certificate presented by this website has expired or is not yet valid.
My bsnl wimax connection has stopped working on my laptop...IT WORKS ON MY FREINDS' LAPTOP. On my laptop (windows 7), in the taskbar, it shows connected and everything seems fine but i cant access any sites or download anything? Does this have to do with a bluetooth device i installed a few days back or some other issue.
We have a Main ASA 5520 and two remote site ASA 5505's that connect to each other via S2S VPN tunnels. Currently they are doing split tunneling, so only local traffic goes over the tunnel. We have are local LAN (10.0.0.0/16) and our DMZ (10.3.0.0/24) network at the main site. The DMZ hosts our external sharepoint, but we have access to it internally The problem is site A (10.1.0.0/24) and site B (10.2.0.0/24) have no idea of it, and when attempting to go to the site, it fails. You can access it via the external site address, but that's the only way. Normally the external address is blocked when you are internal.What i'm stuck at is even when we had all traffic sent from Site A to our main hub, it still wouldn't find it. Would i have to make a separate vpn tunnel purely for that DMZ traffic?
I need to restrict access or rather, block altogether if i can, access of one of the computers on my local wireless network, to online multi-player gaming sites, in particular Age of Empires and Voobly.com, which also uses a messenger type program for them to chat.I've searched and searched online, but alas, have come up with nothing that i understand. I've tried doing the block ports thing, but am unsure if what i've been doing is right. I have blocked Voobly.com under domain and URL settings via the router admin page, but for some reason, it only seems to be denied on my computer. I even went so far as to register and download relevant programs to my computer, for Voobly, so i could see if the blocking worked. Seems it's only my computer that's blocked, i didn't specify ip or mac addresses.I am unable to get on the other computer as it's not mine, and it's also password locked. I don't know the password
My own sites were down & I can't view them on my computer now.This is the 2nd time this has happened to me with router WRT54G.Every time there's a problem with my hosting company & my sites go down, my router blocks them once the sites are back up & running.When I plug directly into the modem I can access them, but then I can't use my phone, etc.I've recycled & I keep trying to find how you save your settings on your router so I can do a cold reboot, but I can't find the instructions anywhere.Why does it keep doing this & how to save the settings & restore them.
I manage to configure the firewall 5505 so that it can ping between outside and DMZ and also between DMZ and inside.
Outside and Inside are not accessible to each other because Outside No Forward to Inside.
My purpose now wants to access the shared folder by Windows Explorer ( under Network ) between for example DMZ and inside. I tried to do it but cannnot even see the Host of the other party network. For example, if I open Windows explorer at DMZ, I can't see the Host at Inside Network. Same as I open Windows Exploere at Inside, I can't see also the Host at DMZ network.
How am I configure so that I can access the hsot as well as shared folder of two sites which already can ping each other?