I cannot access http sites unless I manually write the prefix https. The issue is mainly on Wordpress blog pages and I have to keep writing https if I want to access other blogger's page.For the time being I am using Chrome's extension "Https Enforcer" which slows down my browsing speed but eventually the sites open. I have to disable it if I have to use google images. I use windows 7, Chrome browser, Pocket Modem.
View 2 RepliesI am not able to access https sites (like banking etc.). Once I plug my old router back I have no such problem. I guess it must be router settings that I cannot figure out.
View 7 Replies View RelatedI have a WRVS4400N I am able to block http sites such [URL] but everybody have access to [URL]
View 2 Replies View RelatedMY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 1.1.1.1 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.
View 2 Replies View RelatedI am testing out some inspection options on an ASA 5505, and I am running into a situation in which applying a http inspection is dropping all outbound http traffic. I get a "protocol violation" error in the logs.
Here is the setup: I'm not sure why the web traffic is getting dropped.
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
[Code].....
I am going to hook my laptop directly up to my wireless router via ethernet. I will be showing them security, SSID, etc. My issue is when I put in my WAN and LAN settings. What exactly is the difference between a WAN address and a LAN address.I kept my Lan address that same as the router. 198.162.1.1.I create WAN addresses as 198.162.128.45 with subnet mask as 255.255.255.000 abut not sure what to put in for my gateway. Logic say 198.162.128. 1; however that doesn't work.I then configured my tcp/ip to reflect this. Although I can always access my router website, I cannot access any other web sites.
View 1 Replies View RelatedSo I had trouble connecting to some sites before like apple and such right? No big deal, just one site. Probably down. Then more and more.I got worried, then figured it was my ISP and went to neighbor to check. No. It wasn't. I ran home and checked my router, googled it before all my internet went down. I read something about UPNP being enabled and so after my internet was down, I went and checked, it was, disabled it.
View 1 Replies View RelatedI can't access my ad sites through my internet. I can access them through my phone internet and others are not having any problems going to them
View 3 Replies View Relatedaccess https sites from my PC? I cannot access these sites from IE 9 nor Firefox 6. I even disable firewall to try getting access to the secured websites but to no avail. But this problem recently cropped up when i upgraded my PC from XP to Windows 7.
View 11 Replies View RelatedOur office is running a DELL Poweredge server2 xeon processors16 GB memory5 RaiddrivesVM WARE with 3 virtual machinesOne of the VM's handles our DNS with is our main server second is an exchange server third is a sequal applicaioas of recent we have notice a few website sites we cant access (municipalities of which we access tax info) we need to visit on a regular basis. and it only seem to be just the 3 or 4 that are closest to us. Othe area communities we can access fine. All we get is a page cannont be displayed.The sites works outside our office or on our phones.[CODE]
View 5 Replies View RelatedSituation: Slow internet access, after access keep getting waiting for HTTP, always see n items remaining.What can be done to speed up access?OS is windows 2003 R2, latest updates. [code]
View 15 Replies View RelatedI would like to know if there is a possibility to create 2 Remote access VPNs for 2 ASA situated in different sites and using only one PCF file.Is set up a tunnel between the 2 ASA the only way to reach the 2 destinations with the same PCF file?
View 6 Replies View RelatedI cannot access google sites or services in any browser, tried Chrome, IE and firefox.I'm running Windows XP SP3. I can ping Google without issue. My hosts file is clean and I checked in the registry to make sure that the hosts file is where it is supposed to be. I had trouble finding one that worked but I configured Chrome to use an external proxy and it seemed to work, abeit too slowly to really tell. I did manage to get a Nigerian google page up though.I've flushed the DNS and switched to the free google DNS.Looking around I've seen similar issues with people using Linksys routers. I am not using a Linksys router. I am currently using my android phone as a hotspot.I am running a Windows 7 laptop on the same network with no issues and booting the same host into Vista also works fine.
View 15 Replies View RelatedI have problem i want to access to my http server in my local network from outside
192.168.2.42 : it my server http
195.X.X.X its my internet IP but it was connected in eth 0/4
static (DMZ,Orange) 195.X.X.X 192.168.2.42 netmask 255.255.255.255
access-list outside-acl permit tcp any host 195.X.X.X eq 80
access-group outside-acl in int orange
but its not good why
I just upgraded my ASA 5585 cluster from 8.2 to 8.4. I also upgraded the asdm .bin from 6.35 to 6.43. after rebooter the cluster, I try to access it with ASDM installed on my computer but it blocked at 17%.I tried to access [URL] but I just an error (with IE & FF) [code] What did I miss in the ocnfiguration ? I precise that I never used the http page, I already had the ASDM installed from another ASA.
View 4 Replies View RelatedI try to access to WS-SVC-NAM-2 module in the Switch 6509. But is not work although the HTTP port is enabled (I tested with the command telnet @ip 80).
I try telnet access to the module to check the config , but I always the message that the lo gin / password is wrong even though they are valid.
I installed the LMS as ova template on ESXi and be able to connect via SSH, but when I try to connect via http or https I got the following error.
ForbiddenYou don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
configure my ASA 5505. It is setup using PPPoE. What I want to do is this:
I have one of my IP addresses (99.23.119.78) setup for ftp using the ftp protocol to our internal IP address 192.168.1.3. What I need is to also allow for HTTP access but not just that, I need it to forward the http port to port 9000 because the web interface requires port 9000 for customer access. Previously on our old firewall customers were able to access the web interface by browsing to [URL]. I would like to not have to not require the port in the URL.
In addition, I would like to be able to setup a different IP address in our range (99.23.119.73) to be setup for http access using the standard port 80 for the same internal IP address (192.168.1.3). This URL will allow us to access the administration web interface for the FTP server.
Here is my current config:
Result of the command: "show running-config"
: Saved:ASA Version 8.2(1) !hostname ciscoasaenable password qVQaNBP31RadYDLM encryptedpasswd 2KFQnbNIdI.2KYOU
[Code].....
I have a web cache server, and I redirect all the HTTP request to it using WCCP.
Everything works without a problem, however I have a monitoring system that every minute tests the access to some customer sites that are hosted inside our infra-strutcture.
As soon as I configured the WCCP the monitoring system complains of timeouts accessing those sites, about 20% of the requests start to fail (timeout).
I don't think it is the fault of the cache because in the WCCP ACL I exclude all traffic that comes from my monitoring system. However as soon as I turn of WCCP the monitoring system never ever gives timeouts accessing those sites.
Is there anything I should do in WCCP to tweak it? I have WCCP configured in my core gateway that is a CISCO 3750.
when my Linux VM is running!How's this for a mystery - last night I noticed that I could no longer access my gmail. Thought it might be down. This morning, I still couldn't access it. Thought I would try comcast, no joy either. Changed computers, no difference. Changed routers, no difference. Bought a new router and started plugging in network cables one at a time. My main machine first, everything works - http and https sites, a second computer, all good. The switch. Fine. Powerline. Still good. Then I plug in a Windows server running a Linux VM. Https sites on all the other machines stop working. Pause the Linux VM, restart router - https sites return to life. Went to Linux machine, re-enabled ipv6 (the only recent change on the Linux machine was to disable ipv6 since upon a reboot, Linux didn't have an ipv4 address). Restart Linux everything seems fine. A few hours go by, try to connect my wife's new laptop and at that moment wireless seems to stop. Restart router, wireless is back. But lo and behold, https is gone again. Unplug the machine that has the Linux VM, restart router, all is good.Ever see anything this weird?
View 3 Replies View RelatedI am trying to block access to facebook and twitter on my router, to a certain range of ips, 192.168.1.8 - 254. I have been digging around and trying stuff but all I do seems to restrict everyone access to the internet.
View 5 Replies View RelatedOur secondary site accesses the internal intranet via a link, which is basically:
[URL] where externalip is the IP address of my router.
* This used to work fine before we migrated from ADSL (6mb up / 0.5mb down) to Fibre(70mb / 20mb) *
Internally, I access the same link, but via [URL] Internally it loads in 2 seconds, externally it is taking 68seconds(ish)..
I can't work it out, the fibre shouldave made things loads quicker but is infact very slow. I'm wondering if something network wise is going on.
The intranet is a php intranet sitting on apache, and using postgresql as the database. Other pages load fine, this specific index.php page does quite a lot of DB connections and so on, but as I say before, it worked fine before the migration.
i have a problem with some sites! i cant access to them ! some sites are hotmail, this one, and many other! the msg that i see every time is : There is a problem with this website's security certificate. The security certificate presented by this website has expired or is not yet valid.
[code]...
My bsnl wimax connection has stopped working on my laptop...IT WORKS ON MY FREINDS' LAPTOP. On my laptop (windows 7), in the taskbar, it shows connected and everything seems fine but i cant access any sites or download anything? Does this have to do with a bluetooth device i installed a few days back or some other issue.
View 3 Replies View RelatedEverytime i try to go to a site that uses a google server, i get the message "The server at www.google.com can't be found, because the DNS lookup failed. DNS is the web service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network."
View 2 Replies View RelatedWe have a Main ASA 5520 and two remote site ASA 5505's that connect to each other via S2S VPN tunnels. Currently they are doing split tunneling, so only local traffic goes over the tunnel. We have are local LAN (10.0.0.0/16) and our DMZ (10.3.0.0/24) network at the main site. The DMZ hosts our external sharepoint, but we have access to it internally The problem is site A (10.1.0.0/24) and site B (10.2.0.0/24) have no idea of it, and when attempting to go to the site, it fails. You can access it via the external site address, but that's the only way. Normally the external address is blocked when you are internal.What i'm stuck at is even when we had all traffic sent from Site A to our main hub, it still wouldn't find it. Would i have to make a separate vpn tunnel purely for that DMZ traffic?
View 6 Replies View RelatedI am trying to limit HTTP access to my server on the local network to a specific IP address. I create an Access Rule in the firewall section, however that doesn't work. The only way it works is if I add the internal IP address of the server to the Forwarding section where I create a new HTTP forwarding rule.However, that is not good because that allows ALL HTTP traffic to that server instead of just by the single IP address.
View 2 Replies View RelatedI am facing issue with http login after IOS upgrade on 3750 switches. I upgrade IOS from c3750-ipbase-mz.122-35.SE5.bin to c3750-ipbase-mz.122-53.SE2. bin Any other command I have to run.
View 1 Replies View RelatedI was unable to access my ASA 5520 using HTTP/HTTPS even on the management interface. I had upgrade the ASA IOS to asa832-k8.bin and ASDM to asdm-634-53.bin. But, the issue still the same.
My browser show the error message as attach image.
PGA-Firewall-02# sh run: Saved:ASA Version 8.3(2)!hostname PGA-Firewall-02enable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface GigabitEthernet0/0 nameif public security-level 0 ip
[Code]....
I have cisco 881 and configured with http access, but when i try to open in browser it's shows blank page. Is the Cisco 881 supports GUI ?
View 3 Replies View RelatedI need to restrict access or rather, block altogether if i can, access of one of the computers on my local wireless network, to online multi-player gaming sites, in particular Age of Empires and Voobly.com, which also uses a messenger type program for them to chat.I've searched and searched online, but alas, have come up with nothing that i understand. I've tried doing the block ports thing, but am unsure if what i've been doing is right. I have blocked Voobly.com under domain and URL settings via the router admin page, but for some reason, it only seems to be denied on my computer. I even went so far as to register and download relevant programs to my computer, for Voobly, so i could see if the blocking worked. Seems it's only my computer that's blocked, i didn't specify ip or mac addresses.I am unable to get on the other computer as it's not mine, and it's also password locked. I don't know the password
View 1 Replies View RelatedI'm using my iPhone to write this, because any other site that's not google just ends up as a blank white screen!Internet connection is 5 bars, and I tried cable and changing DSN servers.
View 4 Replies View RelatedMy own sites were down & I can't view them on my computer now.This is the 2nd time this has happened to me with router WRT54G.Every time there's a problem with my hosting company & my sites go down, my router blocks them once the sites are back up & running.When I plug directly into the modem I can access them, but then I can't use my phone, etc.I've recycled & I keep trying to find how you save your settings on your router so I can do a cold reboot, but I can't find the instructions anywhere.Why does it keep doing this & how to save the settings & restore them.
View 2 Replies View Related