Cisco Firewall :: Consolidating Services On ASA5520
Jun 23, 2012
I have 3 ASA5520, 2 of them running as remote access VPN, 1 of the ASA as site to site VPN. There are 2 different ISP's which are used between them. Can I consolidate all these services in 1 ASA5520, relating to configuration and whether the ASA could handle these services together without performance degradation. I forgot to mention even e-mail service and Internet browsing is also though one of the ASA. I was just wondering whether the configuration will get messy or is there a different approach to go about it. The OS on ASA's is 8.3.
View 1 Replies
ADVERTISEMENT
May 20, 2013
I've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.
-INSIDE to DMZ is working fine. (through ASA)
-INSIDE to OUTSIDE is working fine. (through ASA)
Below is the configuration from my PIX (where everything works just fine) as well as the one on the ASA (where there is a problem), what could be the cause?In the below case the DMZ hosts from 11.1.10.0 aren't able to access SMTP services (through ASA) and the OUTSIDE users aren't able to access DMZ web server (11.1.10.40) through ASA, this all just works fine with PIX.
object-group network inside_subnet_all network-object object inside_subnet_a network-object object inside_subnet_b network-object object inside_subnet_c network-object object inside_subnet_d network-object object inside_subnet_e network-object object inside_subnet_f network-object object inside_subnet_g network-object object inside_subnet_.access-list OUTSIDE extended permit tcp any object host-11.1.10.40 object- group WWW-HTTPS access-list DMZ extended permit object SMTP object dmz_subnet any access-list INSIDE extended permit ip
View 1 Replies
View Related
Jul 23, 2011
I really need understanding some of the logic behind the default ZBFW settings on my Cisco 881W courtesy of Cisco Configuration Professional. Here are my two questions:
1.) What is the purpose and logic behind consolidating the first class-map (ccp-cls-insp-traffic) in to the second Class-Map (ccp-insp-traffic) as follows?
Code ....
2.) What is the purpose and logic of Policy-Map ccp-inspect is trying to drop traffic from ccp-invalid-src, which is filtering based on ACL 100:
policy-map type inspect ccp-inspectclass type inspect ccp-invalid-src drop logclass type inspect ccp-insp-traffic inspectclass type inspect ccp-protocol-httpclass class-default drop.
Code ....
View 1 Replies
View Related
May 31, 2011
Our firewall expert has gone off on long term illness leave and I am trying to pick up the pieces :-(
We have an ASA 5520 (local office) talking to another ASA (remote office) via a VPN Tunnel.
My 1st problem is that I cannot ping from my inside network (local) to the outside interface of my remote ASA.
My 2nd is that I have debug enabled on my rules but am not logging anything.
View 1 Replies
View Related
Feb 1, 2012
What are the benefits of consolidation the VPN client users to the ASA 5550? My client currently has the old VPN 3000 series concentrator. Other than it's EOL and EOS, are there any other reasons I can give them?
View 2 Replies
View Related
Sep 18, 2012
I have ASA 5505 ver, 8.4(1) I have configured 2 WAN links to
1. Outside1 - distance metric 50
2. Outside2 - distance metric 20
Currentry all traffic is passing thru Outside2 and it's correct, also s2s and ra VPN is also running on Outside2 ?My current case is to use Outside1 for webvpn services only. I can't use Outside2 becouse on 443 port other services are running, also I cant change webvpn port to other.
How can I match packets incoming to interface Internet1 from Interner side nad route them back thru Internet1 interface.
IPSLA is not a good solution becouse I need to have both WAN links used Now in routing table I have only onre record
S* 0.0.0.0 0.0.0.0 [20/0] via x.x.x.x, INTERNET2
for link with lower metric, but after some problems with provider for link Internet2 routing has changed for Internet1 and didn't change it back after resolving problem? how to create it for all traffic incoming for Internet1 interface from outside?
View 1 Replies
View Related
Dec 22, 2011
With regarding to the firewall ASA5520, i'm using it in my network, all the confiuration are properly configured and working but with the use of proxy address in internet explorer(e.:206.53.155.129/3128) all the blocked contents as easily accessible simply it bypass all the network through firewall.so will u guide me to block the proxy servers.
View 1 Replies
View Related
Feb 18, 2013
How to get DynDNS or some other public dynamic DNS services on the Internet working on ASA 5505?
View 2 Replies
View Related
Jan 3, 2013
I am trying to figure out if the new code for ASA SM 9.0(x) or 9.1 is compatible with CAT6500 but I could not find any document that explicity confirms the the INCOMPATIBILITY. This table from the Release notes is not quite clear.
[URL]
It says that code 8.5 is compatible with Cat6500 and version 9.X is compatible with R7600.So are the two different trains now, one for Cat6500 and one for R7600?
My real goal is to find the correct software versions (not interim) that provides compatilibity with Catalyst 6500 with Supervisor 2T and ASASM.
View 3 Replies
View Related
Nov 28, 2012
We have hosted spam filter service with 3rd party vendor. My vendor is switching to different spamming services and I need to add ip address lets say 44.33.454.32 to the list of allowed system that can connect to my smtp service. I am going over my firewall 5510 configs and I think I need add the entry like this: “access-list outside-to-inside extended permit tcp object-group obj-44.33.454.32 interface outside eq smtp”. [code]
View 2 Replies
View Related
Mar 11, 2013
we have installed and implemented a FWSM on cisco catalyst 6509E and defined two virtual contexts.one of contexts work as datacenter firewall. initially it is configured to allow all traffic to datacenter VLAN. (permit any any) on test, it worked fine, except for one problem: all web services had degradation in performance, all server-client (non web) services worked very fine. additionally all https servies worked well.
Users connect to the web server bypassing the proxy, web services are expected to act just like other ones.
View 1 Replies
View Related
Nov 21, 2012
Do you know how to create a static nat from outside to inside and using services, this is a firewall 5545x
View 9 Replies
View Related
Jul 25, 2012
I have created Different extended access-list which allow/block some specific services like IP,TCP,UDP ,ICMP etc for certain source and destination . But now I have to allow/Block all/any type of services to a certain host from a extended access-list . How can I do it ?
View 4 Replies
View Related
Aug 22, 2011
I have two asa 5520 firewalls. one at my primary data center connected to our production Internet feed, and one at my fail over data center connected to a backup internet feed. I was wondering if there was an easy way to keep the firewall rules in sync between the two firewalls. We have failover with our isp that will move our public facing address block from our primary site to our dr site in the event of a disaster so the ip addresses will not change if we were to have to fail over to the DR site. currently i just have to do any changes that i make on the fail over server but would like a way to at least simi-automat this if not fully automat this so that i can eliminate the possibility of human error of a change happening at primary but never getting don at DR.
View 1 Replies
View Related
Sep 25, 2011
I have a asa5520 with five Internet IP.One for the internet interface and the others are static maped to dmz hosts. It runs rightly until yesterday.Now it will lose the connection to the gateway many times everyday and the dmz hosts can not connect to internet any time. configuration(simplified):
!
interface GigabitEthernet0/0
nameif internet
security-level 0
[Code]....
I called ISP to check,when ISP clear their router's ARP, the asa will lose the connection at the same time and then the ISP's router couldn't learn the ASA's MAC. After I 'clear arp' manually,The ISP's router can learn the ASA's MAC and the connection recovered,but the DMZ's cann't access internet still (of course,There is no problem between DMZ and ASA ,I ping the internet gateway from DMZ host and can not get any reply.).
View 2 Replies
View Related
Oct 3, 2011
We have 2 x ASA5520 and I upgraded this to 8.2.2 last year, I see 8.2.5 and now 8.4 is out. If we are having no issues, is it best just to leave it as it is? I can see a couple of features I may find useful in 8.2.5, but 8.4 seems like a huge jump and a risky one too.
View 1 Replies
View Related
May 8, 2011
I have one firewall ASA5520, are very slow
View 3 Replies
View Related
Mar 7, 2011
I am trying to introduce an ASA5520 to my network based on the following diagram: ISP Internet ------> ASA5520 ------- > Cisco Router ------> LAN. The problem is I cannot ping the ASA from the LAN. I can ping it from inside the router. I already allow ICMP within ASA. If i remove the cisco router and replace it by a swich, I can ping the ASA with NO problem.
View 5 Replies
View Related
May 16, 2011
We want to use ASA5520 but both Firewall have different CPU. One has CPU Pentium 4 2400 MHz and another has Pentium 4 Celeron 2000 MHz. Can it be configured for replica / failover?
View 5 Replies
View Related
Apr 19, 2011
We have 2 firewalls on PIX facing the Internet and connected to interface e1 (behind it) an ASA version 8.3 Both the PIX (Firewall facing) and the ASA are on the same subnet.
By using Routing statements and statics I have been able to reroute specific traffic to the ASA5520 version 8.3 Now I need to inverse the 2 devices. The ASA5520 will be facing the Internet and the PIX will be behind it.Unfortunately the ASA5520 is refusing to route the traffic to the PIX. The access-lists are open accordingly and a NAT on the ASA has been created.
View 2 Replies
View Related
May 31, 2013
i have my router connected to ISP then my router directly connected to my ASA5520....i use also ASA5520 as my DHCP Server and i was wondering with the DHCP Server function of ASA 5520 because if i use the ASA 5520 LAN ip ...all workstation will not be able to browse anything from the internet unless i use my ISP DNS IP which they gave me?
View 3 Replies
View Related
Sep 4, 2012
Get the following log message on secondary ASA console output when turning on the ASA failover function?
"Mate's service module (CSC SSM 6.6.1125.0) on slot 1 is different from mine (CSC SSM 6.6.1125.0)"
After that the secondary cannot join as a failover unit and shows in disabled status.We have the same model ASA & CSC module and each pair of them are in same firmware (CSC 6.6.1125.0 with ASA5520 8.4(4)1), when I shutdown both the csc modules, the ASA failover works fine.
View 8 Replies
View Related
Dec 15, 2012
I am using a squid proxy behind an ASA5520 firewall to collect the users to the internet. Squid is just necessary to log what is going on in order to find a quick solution when the internet slows down.
Considering that I have unlimited licenses and I would like to get rid of squid, I wonder if the ASA has some functionalities to track which websites are being used and how much traffic is generated. If there is not, I would like to know if Cisco offers a good product to replace Squid.
View 2 Replies
View Related
Jun 8, 2011
Upgraded an ASA5520 from 7.x to 8.4 in one step? Release notes for 8.4 state that you can "...upgrade from any previous release directly to 8.4..." I've read the previous version release notes and see the various changes in NAT etc that 8.3 made.
View 3 Replies
View Related
Jul 5, 2011
My customer had 2 asa5520 version:8.0(5)20 and LMS 4.0.1.Two Firewall are "unknow" on LMS, why ?Normally, LMS manages ASA with version 7 min.
View 1 Replies
View Related
Jan 5, 2012
Any limits on the number of IPSec sessions an ASA5520 can support over a DSL connection?
Currently, as we increase the number of IPSec VPN tunnels, our LAN switches connected to the DSL/ASA start seeing CRC/input errors. Tried different LAN ports for both DSL/ASA connections - same reults (CRCs and errors). Swapped ASA for PC running 1 IPSEC w/HD video and no issues.
VPN connection bandwidth demand 50% of DSL capacity, so not exceeding DSL bandwidth. Errors get so bad that all VPN sessions drop - sometimes VPN sessions re-establish while other instances a DSL modem reboot is required.
cause of LAN switch connections seeing errors with 4+ VPN sessions established on ASA across a DSL Internet circuit?
View 1 Replies
View Related
Jan 16, 2012
I'm trying to configure an ASA 5520 with cut-through proxy feature. The user is required to be authenticated when trying to access an outside resource from the inside. This is a test lab before it is implemented in production. [code]
View 15 Replies
View Related
May 12, 2011
I have a pair of brand new 5520s I am in the middle of commission. After carving out all the DMZs etc I needed I realized that I really neede another physical NIC, not just another VLAN off a configured nic. [code]I am running 8.3(2). How can I turn these "Not used" interfaces into useable ones?
View 2 Replies
View Related
May 22, 2013
I have Cisco ASA5520 with a 8.4 code in GNS3. I have a problem pinging to the internet. On the ASA console, I can ping to outside world, but on vpc I cannot ping the outside world. But I can ping the ASA Inside interface and other VLANs, no problem. [code]
View 3 Replies
View Related
Feb 23, 2011
I have a question about access-lists on ASA: (5520 running 8.4)Often I want to permit all traffic from networks behind an interface (let's say DMZ in this example) to Internet, but NOT to internal networks. Then I first configure a Deny from DMZ to all internal network and then a Permit to ANY. If I forget the first Deny I will allow all traffic also to my internal networks. Is it possible to configure an access-list that permit all traffic from a network to all networks that are reachable via a given interface? In this example: Permit all traffic from DMZ to all networks that are reachable via the Outside-interface? This should permit traffic to Internet and deny traffic to internal networks in one statement.If I specify the outside-interface as the destination only traffic to the interface itself will be allowed.
View 1 Replies
View Related
Oct 31, 2011
I've got an annoying problem with my ASA 5520.I have traffic going from the inside interface (security level 100) to the outside interface (security level 0) with a global PAT applied to the outside interface address for all inside traffic - and I can't seem to traceroute through the firewall.The ruleset is simple - basically, allow any IP from inside to outside. The NAT is simple - PAT all traffic unless exempted to the IP address of the outside interface.If I do the trace from my internet edge router it works fine - so I know it's not soemthing my uplinks are filtering - but if I do it through the firewall, I get perfect responses until the hop where it hits the firewall interface - then nothing.Is there something I am missing that I need to do to allow traceroute to just work with all the rest of the traffic?
View 2 Replies
View Related
Apr 11, 2013
how do I verify if CG-NMS is enabled on ASA5520. I just need to know if it's enable/install to be enabled and used?Cisco Adaptive Security Appliance Software Version 8.0(5)28..Device Manager Version 6.1(5)51
View 1 Replies
View Related
Aug 15, 2012
I have a cisco ASA5520 box running with IOS version8.2(5)13 where default policy map is applied globally. But I have not seen any traffic being inspected through included protocol defined under policy map.All configuration seems to be ok for me.
service-policy global_policy global
Global policy:
Service-policy: global_policy
Class-map: inspection_default
Inspect: ftp, packet 0, drop 0, reset-drop 0
[code]....
View 1 Replies
View Related
