Cisco :: LMS 3.2 Services Do Not Start

Oct 26, 2011

LMS does not start, although the services seem to be started. Find attached the pdshow output and let me know what more you need me to send.

View 3 Replies


Workstation Services Won't Start Windows 7?

Feb 18, 2013

a workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.

View 2 Replies View Related

Cisco :: LMS 4.1 - Not Working After Reboot / Services Don't Start Correctly

Aug 30, 2012

We have LMS 4.1 - it was working perfectly for some time - it was rebooted and now the services don't start correctly. I manually started most of the services but the Daemon service will not start.
The main page comes up and after I log in - all the sections list an error
'License Server / Deamon Manager  is down. Please check license.log for more information'.

View 3 Replies View Related

Unable To Start Remote Desktop Services On Windows 7 Machine?

May 2, 2012

If I am not able to start remote desktop services on windows 7 machine, will machine can be accessible by RDP?

View 1 Replies View Related

Cisco :: WCS 7.0.172 Will Not Start

Jun 21, 2011

My WCS quit, apparently after the server was rebooted following Microsoft updates while I was on vacation earlier this week.
 WCS 7.0.172
Win Server 2003 R2 on VMware
<6GB of 50GB disk space used.
After stopping WCS & rebooting:Health Monitor is running with an error.WCS is stopped.Database server is stopped Apache server is running After attempting to restart/start WCS:Health Monitor is already running.This was a clean install/upgrade a few weeks ago.  7.0.172 wouldn't install on top of the previous version so I had to uninstall, install and restore.  WCS had been solid ever since.

View 10 Replies View Related

Cisco :: WCS Version Won't Start

Jun 22, 2011

WCS fails to start with a Tomcat error , see below ;See launchout below - without re-installing WCS
Checking for Port 21 availability... OK
Checking for Port 8456 availability... OK
Checking for Port 8457 availability... OK
Checking for Port 1299 availability... OK


View 8 Replies View Related

Run Two Services At Same Time

Apr 7, 2011

I am running Wondows XP OS and have 2 NIC's in it. One is connected with DSL and other is with LAN of my Network. By using CCProxy 6.4.1 I am running the Internet on my LAN. I also want to run CCTV camera Sevice and want to share it on LAN as I share Internet on LAN but Camera Service Packets do not route on LAN but routhe when i disconnect the DSL Connection. So what i have to do to run both services (internet + camera service) smoothly.

View 1 Replies View Related

Cisco Firewall :: PIX 525 Rebooted But Cannot Start

Mar 27, 2012

Today my colleague add 2 lines of access-list to our PIX 525.  After 10 minutes, my firewall was rebooted and until now can't start.  The booting process as listed below.
The questions are :

1. What is my OS version? Flash?

2. How to remove those 2 lines (reset the config to default)?

Booting process
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00  00  00   8086   7192  Host Bridge
00  07  00   8086   7110  ISA Bridge
00  07  01   8086   7111  IDE Controller
00  07  02   8086   7112  Serial Bus         9


View 1 Replies View Related

Cisco Switches :: How To Start With LACP On Two SG 200-50

Apr 24, 2012

I've two SG 200-50 and I need to use LACP? What should I do?

View 3 Replies View Related

Cisco :: Campus Manager 3.3 Does Not Want To Start

Dec 12, 2011

UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:

"UTLite33.exe is not a valid Win32 application".

View 1 Replies View Related

Cisco :: LMS 3.2 CTM JrmServer Process Does Not Start

Jan 1, 2011

We have LMS 3.2 Bundle that installed on Windows server 2003 OS. I was found that CTMJrmServer service doesn’t coming up. After searching on forum and trying some solved issues my problem still exist. Hostname of server was changed before with script and it was integrated with ACS before but now it’s on Local login mode. Here is my Bundle Version:
1.  Campus Manager 5.2.0
2.  CiscoView 6.1.9
3.  CiscoWorks Assistant 1.2.0
4.  CiscoWorks Common Services 3.3.0
5.  Device Fault Manager 3.2.0 08 Aug
6.  Health and Utilization Monitor 1.2.0 08
7.  Integration Utility 1.9.0 08
8.  Internetwork Performance Monitor 4.2.0
9.  LMS Portal 1.2.0 08
10. Resource Manager Essentials 4.3.0.

View 13 Replies View Related

Cisco :: LMS 3.2 Common Services Error

Nov 2, 2011

I am facing a problem with my LMS 3.2 server. Suddenly I found there is no device reflecing in common services-> device management as well as RME also. I restarted LMS services, server multiple time, reseted casuser, demoted the server from ACS mode to local mode but no luck. However in "dcrcli" i can see all devices and exported all devices to CSV file.
After this I restored from a backup 3 month old when devices were reflecting under common server and RME device management. this also not resolved the problem.
I uninstalled LMS, performed system cleaning and reinstalled LMS 3.2. Then I imported the devices from CSV file i had. Now also the problem not got resolved . I can see devices in dcrcli but none of the device is reflecting under device management of any module.
In Dcmaservice.log i found the error" ERROR,[main],,getAllCommandSet,8661,Invalid MDF data file:D:/CSCOpx/lib/classpath/com/cisco/nm/cwcs/mdf/mdfdata.xml"
Hence I restored teh mdfdata.xml file from another server. However now i can see the following errors
1) in common service -> software center -> device updae -> device count are 0 for all module
2) no device is reflecting under any module
3) one progress i saw when tring to add any device if selecting device type, it is showing me the list of device type along with OID. before restoring mdfdata.xml it was also not comming.

View 4 Replies View Related

Cisco :: LMS 4.0.1 - Telnet From Topology Services Map

Dec 19, 2011

On a LMS 4.0.1 :I want to know what is the right way to change the telnet program on the campus mgr map (topology services map), when right-clicking a device icon and selecting telnet.I would like to use a tool of mine, and not to launch a telnet command from the IE browser.I changed the default telnet of Windows in the registry, but the program is still launched as a telnet URL in the browser and this is not what I would like to do.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Configuration Web Services

Feb 20, 2013

I am trying to do a query, according to chapter 4 in the ACS 5.3 Secure Access Control System 5.3
doing a PUT request have a header of Content-Type: application/xml and my payload is: [code] All I want to do is get a list of users who belong to that group?

View 1 Replies View Related

Cisco WAN :: Running BGP On WS-C3750X-24T-S Using IP Services IOS?

Apr 10, 2012

Im planning to install a WAN Switch on our network basically this WAN switch will be the core WAN switch in our WAN segments where all WAN connections coming in and will use EBGP peering to every CE WAN router.
is Advanced BGP supporeted in WS-C3750X-24T-S?

View 5 Replies View Related

Cisco :: Ports / Protocols / Services Associated With LMS 4.1?

Jun 4, 2013

Where can I find a document that list and describes all the PPS associated with CiscoPrime LMS 4.1 and later?

View 2 Replies View Related

Broadband :: Unable To Start Rpc

Mar 19, 2012

How do you enable Window XP RPC,Had W32Blaster.worm and cleaned system, however Internet will not load lack of RPC ,Message; no or low connectivity.

View 9 Replies View Related

Can't Connect Via IE Unless Start Then Stop VPN

Feb 21, 2012

I boot my computer at my company and if I immediately try, I can connect to the internet with IE or Chrome'm on my company's network. A few minutes after computer start up, I can no longer connect to the internet (times out). However, if I then open VPN, connect to the company network and turn right around and close VPN I now can connect to the internet. I've queried my IT group and they get a 'Huh?' expression on their face

View 5 Replies View Related

Cancel Linksys And Start Over?

Mar 30, 2011

I had to reboot my laptop and reset my wireless. Now I cannot sign on unless I am on the desktop connected to the router. How do I start over and reconfigure. I have another desktop and a laptop that I need to have access for internet.

View 1 Replies View Related

Intel PWLA8391GT Will Not Start?

Jan 24, 2013

I disabled my Intel PWLA8391GT because i wanted to test the onboard network, was not happy with the onboard network so i tried to switch back by enabling the drivers... well it then had a little yellow triangle with a ! in the middle it then told me that it could not start... I then restarted my computer and when i started it was in the unknow as pci device i then installed the drivers manually and it ran into the problem again..

View 1 Replies View Related

Code 10 - This Device Cannot Start

Mar 30, 2011

I just got a new server for hosting, installed Windows Server 2008 R1, and it installed correctly with no errors. First time running it, everything is plugged in, and there ethernet would not pick up at all. Went to Device Manager and got: "This Device Cannot Start. Code 10"Tried different cables, I even swapped the network switches (clearly wasn't the problem). More information can be supplied if needed.

View 3 Replies View Related

Can't Get Other Services To Forward Through IP Tables

Apr 3, 2012

A fair while ago I setup a transparent proxy server running Opensuse (think it was version 10.2), it worked perfectly, cached the http traffic and still allowed https, and other services to be accessed. However the drive in it died so its being setup again.I've got squid running transparently just fine, but I can't get the other services to forward through IP tables.. I know i can't cache HTTP - and nor do I want to. I thought from memory that I had the default option for the sections in iptables to "ACCEPT", and just had rules to redirect the http traffic to squid. However that's exactly what I've got now - and I can't access anything other than port 80.I have Google it and i'm getting so many varied responses people telling saying it can't be done, others saying you have to add a rule for every other port.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 - Application Failed To Start

Apr 28, 2012

Although, ACS states its installed, after going through the startup. However when I do show application nothing comes up. When I do a application start acs, %Application failed to start.

View 7 Replies View Related

Cisco :: CiscoWorks Won't Start After LMS Upgrade 3.0 To 3.2 / Error 502

Nov 24, 2012

I upgraded CiscoWorks LMS from 3.0 to 3.2 today.  Everything worked prior to the upgrade.The upgrade was successful, with no errors, and all services started. check everything and I see no problem. The system creates the file me clean without any content.I add the installation log file;And tell them that after upgrading to 3.2, you carge the following patches:,,,
in that order.He added the logs generated by the LMS services Tomcat and Apache

View 4 Replies View Related

Cisco WAN :: Cat3750 Copy Run Start Error

Jul 4, 2012

I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be reconfiguring it and that is not something I am interested in doing! [code]

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Doesn't Start

Feb 28, 2013

I write because my Cisco ASA 5505 doesn't start.When I connect power to the device, immediatly "Power" green Led turn on but "Status" Led is orange and not change.There is not data by Console cable.I try by another Power Supply but nothing.

View 1 Replies View Related

Cisco VPN :: ASA5510 / Client - Start Before Logon

Jan 23, 2012

A customer of my have a ASA5510 and want to use de Cisco VPN Client with the opties start before logon but I can find that option in the client. The computer is running on Windows 7. Does the option is still there or on with operating systems it is supported?
Also I tryed to configure it with the AnyConnect client but I can found how I simple need to configure it. I have installed on my computer the AnyConnect Client and the AnyConnect GINA but I don't seen also the option.

View 1 Replies View Related

Cisco :: LMS 4.0.1 Topology Services Not Running On Windows 7?

Sep 19, 2011

I installed LMS 4.0.1 and every module works from the local server. Http login from a remote system, topology services does not start, complains about java version. I followed the link to install the java version, it then complains about some Ansiserver stuff.
the client os is win7 64 bits, eplorer version is 7.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: Acs 5.3 - Moving Between Access Services?

Jul 4, 2012

Currently trying to set up the above so that if an access service is not matched then it will go to the next one. Looking at the logs what happens is - our auth is set to AD so it matches that - then it isnt in the correct ext AD group and goes to default deny access.
Cant see how to get around this - the only continue command is in the advanced area of the auth - but i cant set up ext ad groups on the auth. How do i get this to move between access services if it doesnt match the ext AD.

View 3 Replies View Related

Cisco :: Unable To Launch Topology Services LMS 4.0

Nov 7, 2011

When i try to launch topology services in LMS 4.0 i get prompted to install a java plugin. When i install this it tells me to restart the browser but nothing is changed, it asks me if i want to install the java plugin again.

View 7 Replies View Related

Cisco Routers :: RV220W VLAN Services From ISP?

Sep 7, 2011

My ISP sends various services through VLAN. Internet, TV and Telephone.Now I wonder, is it possible to use this router to distribute these VLANs through the wan port to eg my IPTV box?

View 5 Replies View Related

Cisco Firewall :: ASA 5505 / Dual WAN For Different Services?

Sep 18, 2012

I have ASA 5505 ver, 8.4(1) I have configured 2 WAN links to

1. Outside1 - distance metric 50
2. Outside2 - distance metric 20
Currentry all traffic is passing thru Outside2 and it's correct, also s2s and ra VPN is also running on Outside2 ?My current case is to use Outside1 for webvpn services only. I can't use Outside2 becouse on 443 port other services are running, also I cant change webvpn port to other.
How can I match packets incoming to interface Internet1 from Interner side nad route them back thru Internet1 interface.
IPSLA is not a good solution becouse I need to have both WAN links used Now in routing table I have only onre record

S* [20/0] via x.x.x.x, INTERNET2

for link with lower metric, but after some problems with provider for link Internet2 routing has changed for Internet1 and didn't change it back after resolving problem? how to create it for all traffic incoming for Internet1 interface from outside?

View 1 Replies View Related

Cisco :: 5.1 Secure Services Client (SSC) For Windows 7

Dec 8, 2010

The organization that I worked for purchased large number of Cisco Secure Services Client Licenses for Windows XP. Now they have plans to move to Windows 7. Reading different discussions, I know that SSC ver 5.1 does not work with Windows 7. My questions are:
1) Will there be a new SSC for Windows 7? Will we be able to configure the pre-package for installation with the new SSC?

2) Can we use the existing SSC ver 5 licenses with the new SSC for Win 7?

View 4 Replies View Related

Copyrights 2005-15, All rights reserved