I disabled my Intel PWLA8391GT because i wanted to test the onboard network, was not happy with the onboard network so i tried to switch back by enabling the drivers... well it then had a little yellow triangle with a ! in the middle it then told me that it could not start... I then restarted my computer and when i started it was in the unknow as pci device i then installed the drivers manually and it ran into the problem again..
View 1 RepliesI know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
My WCS quit, apparently after the server was rebooted following Microsoft updates while I was on vacation earlier this week.
WCS 7.0.172
Win Server 2003 R2 on VMware
4BG RAM
<6GB of 50GB disk space used.
After stopping WCS & rebooting:Health Monitor is running with an error.WCS is stopped.Database server is stopped Apache server is running After attempting to restart/start WCS:Health Monitor is already running.This was a clean install/upgrade a few weeks ago. 7.0.172 wouldn't install on top of the previous version so I had to uninstall, install and restore. WCS had been solid ever since.
How do you enable Window XP RPC,Had W32Blaster.worm and cleaned system, however Internet will not load lack of RPC ,Message; no or low connectivity.
View 9 Replies View RelatedI boot my computer at my company and if I immediately try, I can connect to the internet with IE or Chrome'm on my company's network. A few minutes after computer start up, I can no longer connect to the internet (times out). However, if I then open VPN, connect to the company network and turn right around and close VPN I now can connect to the internet. I've queried my IT group and they get a 'Huh?' expression on their face
View 5 Replies View RelatedI had to reboot my laptop and reset my wireless. Now I cannot sign on unless I am on the desktop connected to the router. How do I start over and reconfigure. I have another desktop and a laptop that I need to have access for internet.
View 1 Replies View RelatedI just got a new server for hosting, installed Windows Server 2008 R1, and it installed correctly with no errors. First time running it, everything is plugged in, and there ethernet would not pick up at all. Went to Device Manager and got: "This Device Cannot Start. Code 10"Tried different cables, I even swapped the network switches (clearly wasn't the problem). More information can be supplied if needed.
View 3 Replies View RelatedWCS fails to start with a Tomcat error , see below ;See launchout below - without re-installing WCS
Checking for Port 21 availability... OK
Checking for Port 8456 availability... OK
Checking for Port 8457 availability... OK
Checking for Port 1299 availability... OK
[code]....
LMS does not start, although the services seem to be started. Find attached the pdshow output and let me know what more you need me to send.
View 3 Replies View RelatedI recently upgraded to a Intel EXPI9301CTBLK (PCIe) and have been having trouble with the connection disconnecting. Mostly I have noticed it when I have a torrent running with a lot of connections, but it has happened at other times as well. If I have 3+ torrents running it will disconnect every fifteen minutes or so. If I unplug the cable and reconnect it everything works fine. Otherwise it seems to work perfectly fine and will transfer files from my file server at 95+ MB/s.
I running Windows 7 and have not installed any drivers other than the ones that the OS automatically installs.
very time I start my laptop I have to start WZC.In my wireless network connections,I always have a broadcom 802.11g network adapter in the connect using box.Is there anyway to find out if this is working properly or use windows to connect for me?
View 4 Replies View RelatedOn start-up my laptop is slow to connect to the WiFi (about 1.5 mins). After connecting it works fine. When new laptop used to connect to WiFi much quicker, but now initial connection is slow.
[code]....
I just spilled water on my companies Dell Latitude D630 and it didn't start. On the D630 I signed onto a domain. When I put the hard drive from the D630 to a Dell D620 the domain option is grayed out. The only option is to log onto locally. Is there anywhere to get the domain option back?
View 8 Replies View RelatedI am Using Windows 7 32-Bit, and my Network usually works fine, and my internet has been working fine up until recently. However about a month (maybe more) I noticed a problem that kept cutting me off occasionally and said Diagnostic Policy was not started, I troubleshooted it and it was fine. Much more recently this has been happening more frequently and troubleshooting it doesn't solve the problem. I can get online for 10-15 Mins then I am cut off again. Restarting the computer often fixes it but not always. I went to Services and found the Diagnostic Policy Service is not running, I press start and receive this error message.
The Diagnostic Policy Service service on local computer started and then stopped. Some services stop automatically if they are not in use by services or programs.I am quite sure my loss of Internet is due to this as this is a network related service and what the troubleshooter always finds to be the problem. Other Computer/Devices in the house connect to the internet fine with no loss of connection so it has nothing to do with that. I have tried various fixes like uninstalling network adapter drivers, and checking permissions in Registry but it has not worked.
I have connected the router to my pc but can not start the connection
View 1 Replies View RelatedI had my network running seamlessly for years, I set it up using a guide from a magazine and had both wired and wireless working A1 and originally it was all win xp pro, 2 desktops and a laptop but got a macbook pro and got that using printer, sharing fies etc. All no problem and it was all easy peasy BUT I have mucked up big time and I think it was because I downloaded some system cleaning software, advanced care, toolwiz and pc pitstop but I was not paying attention and I am sure I clicked a few buttons I should not have done. Result disaster, no longer can share files or print etc.ll I want to do is reset everything and start afresh but how do I do that? I use a netgear router with norton security on main desktop. I have a wii, an xbox, apple tv running as well along with 2 desktops, a laptop and a macbook pro. Tried a few things but nothing worked, when I click on network places I get a list of shared folders but end location shows internet! I have to use netgear switch boxes as well but should not have caused the problem.
View 4 Replies View Relatedmy hp 5102 takes long to start.
View 1 Replies View RelatedI have a server on Intel PC and the computer used to start up if the power shutdown and then come back. However, lately , I notice that when the power shutdown and then come back, the server is not turning on and have to press the turn on button on the PC.
View 2 Replies View Relateda workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.
View 2 Replies View RelatedI would like to allow another user to access my home server to be able to restart his teamspeak/ mine craft servers. I know game hosting companies can do it and would like to know how I can have him be able to restart them without remote desktop.
View 2 Replies View RelatedI am on Windows 7 with the Tor/Vidalia proxy package. After downloading Privoxy 3.0.17 and installing the program, I get the following message when I try to start it: "Fatal error: can't bind Privoxy to 127.0.0.1: 8118. There may be another Privoxy or some other proxy running on port 8118". Most assuredly, I have never installed Privoxy before and I don't know which other proxies may be running on Port 8118. Aside from Tor/Vidalia, the only other proxy I am running alternatively with Tor for anonymity is Jap-JonDo. It is also confusing that most web sites mention a Vidalia bundle containing Privoxy, but none of the bundles actually contains it. They all have Polypo instead. I hear that Privoxy is recommended, but how do I get it running, with the message I got?
View 9 Replies View RelatedToday my colleague add 2 lines of access-list to our PIX 525. After 10 minutes, my firewall was rebooted and until now can't start. The booting process as listed below.
The questions are :
1. What is my OS version? Flash?
2. How to remove those 2 lines (reset the config to default)?
Booting process
================
Rebooting..þ
Wait.....
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
[code]....
I've two SG 200-50 and I need to use LACP? What should I do?
View 3 Replies View Relatedi have bought XPS L502X. How its bluetooth will start working. The radio signal capturing is "on" but still not working.
View 12 Replies View RelatedUTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
We have LMS 3.2 Bundle that installed on Windows server 2003 OS. I was found that CTMJrmServer service doesn’t coming up. After searching on forum and trying some solved issues my problem still exist. Hostname of server was changed before with hostnamechange.pl script and it was integrated with ACS before but now it’s on Local login mode. Here is my Bundle Version:
1. Campus Manager 5.2.0
2. CiscoView 6.1.9
3. CiscoWorks Assistant 1.2.0
4. CiscoWorks Common Services 3.3.0
5. Device Fault Manager 3.2.0 08 Aug
6. Health and Utilization Monitor 1.2.0 08
7. Integration Utility 1.9.0 08
8. Internetwork Performance Monitor 4.2.0
9. LMS Portal 1.2.0 08
10. Resource Manager Essentials 4.3.0.
windows server 2003 drivers
View 1 Replies View RelatedThis first started happening a couple of weeks ago when a piece of software was put on to the computer off an external hard drive. First the wifi would turn itself off but after turning it back on it might happily stay on for a few hours before switching itself back off.The day before yesterday it decided to start turning itself off straight away. I plugged in with ethernet, uninstalled the old drivers and reinstalled new ones, this didn't seem to do anything so I turned on my firewall and titanium defense and after a while it decided to start working again.Earlier today I connected my DSLR camera to my USB 3 port to download pictures, this killed my wifi straight way. I reconnected with ethernet and I'm not sure what I did but now the wifi has decided to work again.
View 4 Replies View RelatedI'm running Win7 on a Lenovo x200. Has run fine for a year. Lately the wireless card disconnects and the system shows no available card. Have to reboot to reconnectThe card is an Intel 5100 AGN. Have tried uninstalling all software and reinstalling latest drivers from Intel and Lenovo. Have tweaked power saving controls, and tried about every suggestion out there. But the problem persists.
View 1 Replies View RelatedI have installed an Intel PRO/1000 MT Dual NIC into an HP Elite 8200 box on which I'm running Citrix Xenserver 6. The HP box also has an onboard NIC which works fine.
I'm having problems with the dual NIC. If I plug a cable into one or the other, but not both at the same time) that NIC lights up and shows as connected in the XenServer console. But as soon as I plug a cable into both NICs neither of them lights up and XenServer seems to lose sight of both of them.
Why can't both work simultaneously? Do I need to run an Intel utility of some sort on them to configure/flash them in a certain way for a Linux box (XenServer is based on Red Hat)?
I have also tried getting them both to work when booting into a Linux Live CD so I don't think it's a XenServer problem. I have also found that the exact same problem exists when the dual NIC card is installed in a Windows 7 system - one of the NICs will work, but as soon as you plug a cable into both the lights go out. So it doesn't seem to be an operating system issue.
I've been having some issues lately where if I am copying large amounts of files two and from my NAS and thus saturating my gigabit ethernet, web browsing and internet streaming slows down which is a bit of a bummer. I figured I might fix this with link aggregation.
My switches (Procurve 1810G-24 in basement and 1810G-8 in office) both support 802.3ad Link Aggregation. It works beautifully to connect them together, as well as to connect my FreeNAS box to the switch as well.
how do I set it up to work with my Windows 7 box?
I can't find the options for 802.3ad in the windows menus anywhere, and googling has not led me to the answer yet...
My motherboard has two on board Intel gigabit ports (Intel 82574L and Intel 82579V). Is it possible to link these two, or do I need to pick up another Intel PRO PT dual port copper gigabit NIC like I have two of in my server?
I let him take control of the system, he ran [URL] with me 6 feet from router, and then again 30 feet. Huge difference in speed, approximately 10x slower at 30 feet. He initially stated the problem was with the antenna connection and offered to send a tech to replace the antenna, which requires a display replacement as well. I was skeptical so pressed him to verify that this was a known solution since there were so many complaints. He was absolutely certain this was the issue, but put me on hold to double check. He came back and stated they needed to replace the wi-fi card from the Dell 1901 to Intel 2230 along with the antenna. As a former antenna engineer, I suspect the problem is the design of the antenna and/or its location, and not the drivers or wi-fi card.
View 1 Replies View RelatedI have a Toshiba Equium A200,(from new some time back) however, i have had it updated with new 500mb drive etc! I also some time back installed Windows 7 home. At first all was well, then a few months ago i noticed (upon star-up) that the network adapter was not connecting to my Belkin router? The Network & sharing centre tells me that it is connected, although the icon on the bottom toolbar shows a yellow triangle & reads No Internet connection? I have to go through the same process evrytime to get connected, which usually takes approx. 5 mins That is to follow the Network/share centre's troublshooting? I have updated the adapter Driver, yet still the problem exists?
View 3 Replies View Related