Diagnostic Policy Service Cannot Start
Apr 8, 2011
I am Using Windows 7 32-Bit, and my Network usually works fine, and my internet has been working fine up until recently. However about a month (maybe more) I noticed a problem that kept cutting me off occasionally and said Diagnostic Policy was not started, I troubleshooted it and it was fine. Much more recently this has been happening more frequently and troubleshooting it doesn't solve the problem. I can get online for 10-15 Mins then I am cut off again. Restarting the computer often fixes it but not always. I went to Services and found the Diagnostic Policy Service is not running, I press start and receive this error message.
The Diagnostic Policy Service service on local computer started and then stopped. Some services stop automatically if they are not in use by services or programs.I am quite sure my loss of Internet is due to this as this is a network related service and what the troubleshooter always finds to be the problem. Other Computer/Devices in the house connect to the internet fine with no loss of connection so it has nothing to do with that. I have tried various fixes like uninstalling network adapter drivers, and checking permissions in Registry but it has not worked.
View 4 Replies
ADVERTISEMENT
Feb 28, 2012
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
View 10 Replies
View Related
Feb 22, 2011
System was running fine untill about two days ago. File and print sharing stop working. went to services and tried to restart "Computer Browser". It would not start due to a dependancy. Tried to start "Server Services" Got the following error. "Can not start Server Service on local computer, Error 2:The system cannot find the filed specified". The files srvsvc.dll 95KB 4/14/2008 The file srv.sys 327KB 4/14/2008.If I delete either of these files they are just created again. If I replace them with the new versions they are converted back to these files.I am running XP Pro SP3.
View 3 Replies
View Related
Jan 15, 2012
copy of system info file wifie and network service will not start. services are enabled in dell boot when F2 used in start up. I can see from this that the media is disconnected. How do I connect the media?
OS Name: Microsoft Windows 7 Home Premium OS Version: 6.1.7600 N/A Build 7600OS Manufacturer: Microsoft CorporationOriginal Install Date: 04/06/2010, 17:53:05System Boot Time: 16/01/2012, 23:18:39System
[Code].....
View 1 Replies
View Related
Feb 23, 2013
I've been working on my laptop recently, once finished i turned my computer off like most people do. After turning it back on hours later, i noticed that my laptop was connected to the internet router but had limited access which ment i could'nt get onto the internet ! So when I went onto Network and sharing center and nothing came up apart from ''the dependency service or group failed to start'' ...I don't want to use system restore or reset tools of windows
Current OS: Windows 8 PRO
Model: ASUS K43SV
View 1 Replies
View Related
Jul 20, 2011
DHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.
View 1 Replies
View Related
Mar 11, 2013
Im having trouble with the topology service. Java is installed, but i cant start the topology service.
View 7 Replies
View Related
Sep 11, 2011
After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.Following is the error:ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up?
View 1 Replies
View Related
Mar 8, 2013
I have done new configuration for CPI 1.2. while i tried to start service i got belw error. [code]
View 3 Replies
View Related
Sep 29, 2011
I'm running a Windows Server 2008 Enterprise Edition server that is currently the domain controller, and a Windows 7 Ultimate client. I have a 'Test' user for messing around with group policy - anyway, on the client Start Menu it has 'Test User' which leads to some form of libraries folder. Is it possible to restrict the link without removing their name?
View 3 Replies
View Related
Apr 2, 2012
i have tryed starting it on the services but that willl not do it eitheir. i have tryed almost everything and it stilll does not work. i can not access internet. plus i think a virus messed up my internet protocols. i think i removed the virus though i have been looking for an answer for 7 hours now
View 1 Replies
View Related
Nov 14, 2012
After I initial MSE with the wizard. MSE take so long to start the service (more than 1 hour) with "Starting MSE Platform, waiting to check the status"Then I decide to reboot the appliance, after that MSE shows the message "Traceback (most recent call last) File "/usr/sbin/yum-updatesd", line 40, in ?import gaminImportError: No module named gaming.
View 7 Replies
View Related
Mar 7, 2012
My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".
View 5 Replies
View Related
Apr 11, 2012
Day before yesterday my Laptop [Dell Studio] has suddenly stopped working and i have to shut it down forcefully. Then i logged in again but my wireless was not working, i have googled the solutions and tried to start the WLAN Autocofig service but its throwing an error : 1053 : The service did not respond to the start or control request in a timely manner.I have Windows 7 installed on my system.Suddenly the speed of my laptop reduced drastically. Now its taking almost 12 mins to start instead of 2 mins.I have also removed some lines from the test files from the registry as mentioned in the below website as a resolution, but its not working.Unable to connect to wireless networks on Windows 7 Enterprise laptop. I dont have OS [Operating system's] CD as it was pre-installed on my laptop when i bought it.
View 2 Replies
View Related
Oct 23, 2011
We are evaluating Cisco ACS 5.2 and I can not delete a service policy that was created. The message we receive is " the item that you are trying to delete is being referenced by other items". I am new to ACS, but I did go through each tab in the manager multiple times.
View 5 Replies
View Related
Nov 30, 2011
I encountered this problem with cisco 870 atm interface. I applied service-policy output, its being accepted but when you do a show run interface, it's not there.
View 5 Replies
View Related
Jan 10, 2013
I have the following scenario: Pair of Cisco 887VA routers acting as Layer 3 for Voice/Data VLANs with a pair of 2960 LAN Base switches acting as Cores and possibly then 2960 LAN Lites hanging off them as access switches. Our Service Provider has provided an example config where the class-maps match based on dscp values for the QOS policy applied to the DSL circuits. We can obviously trust the attached phones but I want to be able to mark data traffic on my core switches based on destination IP/port to allow application definition. My major question is can I have a service policy on my Layer 2 uplinks to the routers where the linked classes setting dscp vlaues are based on class-maps matching on the contents of IP access lists based while at the same time not remarking the EF marked packets from the phones?
View 7 Replies
View Related
Feb 21, 2013
I have an issue about ACS v5.3 Appliance.I have an ACS v 5.3 wo authenticate wireless users, together with a cisco wlc. One profile is to corporate users and the second profile is to guest.
The corporate users should authenticate with Active Directory and the guest with WLC. Guest users should authenticate with the ACS Local Database. I have configurate two service selection policy that match with protocol Radius. The first rule is to users of Active Directory and the second is to users in
the Local Database of ACS.When i try to authenticate users with active directory is OK, but when try to authenticate users with Local Database (Guest Portal) the ACS try to find the
the internal user in the Active Directory, because math the first rule, and the second profile can not authenticate.When I change the order, first the Rule of internal users and second the rule of users of Active Directory, the internal users can authenticate in to ACS, but
the users in the Active Directory can not authenticate.I think my ACS only authenticate the first rule of radius to Active Directory, no two rules of radius in the same time. Or maybe exists an issue in OS of the ACS.The authentication by separately is OK.
View 5 Replies
View Related
Jan 16, 2012
Configuring Cisco 2951 router using Cisco Configuration Professional. I have created a zone based firewall on the router and have created a zone policy for network traffic between two LANs or two zones. I need a create a rule for new traffic that should allow a custom user defined service to flow between the two zones associated with with two LANs.
The problem is How do I created a custom service that I can use for the new traffic rule? I created a network service object as shown in the screenshot below:However, when I am adding the new rule, this service object does not appear in the user defined service in the protocols tree box as shown in the screenshot below:
What is the proper way to create a custom user defined service? I was not able to create it using Class map by the way because again I did not find the service object group in the user defined service when creating a class map.
View 2 Replies
View Related
Sep 26, 2012
I am facing issue while configuring service-policy output command in Cisco 7609-S router with c7600s72033-adventerprisek9-mz.122-33.SRE2.bin IOS. However, in the same series router having IOS c7600s72033-adventerprisek9-mz.122-33.SRC6.bin is supported service-policy output.Both the switch have WS-SUP720-3BXL SUP.
View 2 Replies
View Related
Mar 21, 2013
I got this 3640, trying to apply a service-policy (output and input), but seems like I do it something wrong...because he only apply the output policy... here the config, I already try to config the service police inside the fa0/0, but is not showed at all, he only show the output, its like I never apply that
View 1 Replies
View Related
Jun 6, 2011
I run 2801 with 124-24.T3 and I have following problem: router is connected to internet over pppoe and ISP once per day breaks this link. so I get:
Jun 7 19:31:56.639 MSK: %DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
Jun 7 19:31:56.663 MSK: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down
and I also have tunnel interface which endpoint is accessible over internet.
so I get:
Jun 7 19:31:56.679 MSK: %ADJ-5-PARENT: Midchain parent maintenance for IP midchain out of Tunnel1 68844500 - looped chain attempting to stack
Jun 7 19:31:57.635 MSK: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down
Jun 7 19:31:59.199 MSK: %TUN-5-RECURDOWN: Tunnel1 temporarily disabled due to recursive routing
this is not a problem, problem is that router when interface goes down removes service-policy output from it, so I receive such message every day from runcid:
ip ospf cost 1
ip ospf mtu-ignore
tunnel source Loopback1
tunnel destination 192.168.200.199
- service-policy output tunnel_mpr_gre
and have to restore policy manually.
View 1 Replies
View Related
Aug 7, 2012
Have installed an 887VA on the end of a ADSL connection. The provider has specified EF 150 on the link. The router is configured using a Virtual Template.
If the Virtual Template has a service policy applied, we don't have connectivity to their main site - although the CD and PPP lights are lit. As soon as the service policy is removed, we have connectivity.
We've had three sites with the same problem. Two of the sites don't have QoS specified on the link but had the same problem if the service policy was applied.
Hardware - CISCO887VA-SEC-K9
Software - 15.1(4)M4
=== config snippets
class-map match-all Voicematch access-group 10
policy-map Dscpclass Voice priority 150class class-default
interface ATM0
bandwidth 1143
bandwidth receive 12334
[code]....
View 3 Replies
View Related
Nov 10, 2011
I have some trouble with that policy-map on my 2960 or 3560 switches with LAN base 12.2(53)SE2. I want to use that feature to catch video traffic from webcams in laptops which can't send dscp values out of the box. This is my test config to check if the function is working: catch every traffic from my workstation for testing, access-list 101 permit ip any any, class-map match-all CL_TEST
1. I can't see any counters with the command "sh policy-map interface FastEthernet 0/1". Cisco tells that this command is not possible. But how I can see if the policy is working correct?
2. When I did the configuration I can't see any packets with dscp af41 on the out going interface on the switch with "sh mls qos int gi0/1 statistic" as I expected. After reloading the switch I see the pakets with af41. Okay for that moment. But.After that I changed something in the policy-map. Only "set ip dscp ef" for a second test.
Generating some traffic I see only packets with af41 as before I changed the policy-map. No traffic with ef on the outgoing interface.
View 4 Replies
View Related
Jul 18, 2011
I've run a across a strange issue that I've not encountered before and after the things I've tried am beginning to think it's a limitation of the router itself. What I have are 3 Cisco 1941 routers that are all endpoints for a customer's MPLS network. STL is the headquarters and both remote offices have a link back this router. Each of the remote locations only have 1 serial interface. It is a flat network with few routes and a small shoretel voip system running across it. Each router is running C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M5, RELEASE SOFTWARE (fc2).
QoS is configured as follows on each router:
class-map match-any AutoQoS-VoIP-Remark
match ip dscp ef
match ip dscp cs3
match ip dscp af31
class-map match-any AutoQoS-VoIP-Control-UnTrust
match access-group name AutoQoS-VoIP-Control
class-map match-any AutoQoS-VoIP-RTP-UnTrust
[code]....
If I try to apply the policy map to serial0/0/0, I get the following error:
% policy map utoQos-Policy-Untrust not configured
I've tried to create a different policy map with the same settings and get the same error. We thought that when it was first set up, each interface belonged to the same network, so we separated things out (hence the .252 mask). I'm not sure what else to try and I'm hoping its something painfully simple that I'm missing.
View 2 Replies
View Related
Jan 7, 2013
We have a problem with some websites being blocked every now and then. Everyone inside can access this external website for weeks, and then suddenly it's not available for a few hours, and then it comes back. All without me making any changes to the firewall, ASA5510. The external website that has nothing to do with us can be accessed from anywhere outside our network, example on my iphone through Verizon.
We have not set up any rules about blocking websites, all I found was the Default Service Policy. After backing up and then deleting the rule we are able to access all sites.
View 2 Replies
View Related
Jun 2, 2013
i just configured a C6K VSS with Sup2T, 15.1SY IOS software and a WS6724-SFP module with the follwing cos config:
auto qos default
table-map cos-discard-class-map
map from 0 to 0
map from 1 to 8
map from 2 to 16
[code]....
After applying the service policy to one interfac of the WS6724-SFP module the policy is deployed to all interfaces of the module. So far it should be ok but after a short time all interface of the module begin to go down an up and down and up ... flapping.
View 1 Replies
View Related
Feb 7, 2012
In my Cisco ASA 5510 in release 8.2, I have an extrage behavior in the output of "show service-police" command. The issue is that I create a class-map to limit trafic in one of ASA interfaces and I applied in a service policy. This is the configuration:
access-list ACL-Limitada extended permit ip host srv-proxy any
access-list ACL-Limitada extended permit ip any host srv-proxy
access-list ACL-Limitada extended permit tcp 192.168.10.0 255.255.255.0 any eq ftp-data
access-list ACL-Limitada extended permit tcp 192.168.10.0 255.255.255.0 any eq ftp
access-list ACL-Limitada extended permit tcp any 192.168.10.0 255.255.255.0 eq ftp-data
access-list ACL-Limitada extended permit tcp any 192.168.10.0 255.255.255.0 eq ftp
[code]...
View 1 Replies
View Related
Dec 24, 2012
i would like to know the possibility to use mls qos trust dscp with service-policy in the IOS ver.12.2(25)SEE2.The specific version is not possible to configure like below.
Cat3750(config-if)#do sh run int f1/0/1
Building configuration...
[code]....
View 8 Replies
View Related
Jan 26, 2009
I have a 3750 switch (c3750-ipbasek9-mz.122-46.SE.bin) were i want to add bandwitdh limit pr. interface, doing the following:
ip access-list extended customer_A
permit ip any any
class-map match-all BW_10Mbps
[Code]....
When i trie to apply the "service-policy output 10 Mbps" to the interface, it says the service-policy output is not supported on the switch. Is this a software related isue ?
View 4 Replies
View Related
Jan 6, 2013
interface Vlan24
description Internal Wireless Internet
ip address 10.x.0.1 255.255.254.0
[Code]....
So, I am trying to limit the bandwidth used by this vlan. The service-policy output statement works, the service-policy input statement does not. My test is to get on that vlan and go to speedtest.net. My download speeds are about 3.5Mb/s, my upload speeds are about 20Mb/s.
it has something to do with this:
sh mls qos ip
QoS Summary [IPv4]: (* - shared aggregates, Mod - switch module Sid - Switch Id)
Int Sid Mod Dir Class-map DSCP Agg Trust Fl AgForward-By AgPoliced-By
[Code].....
View 1 Replies
View Related
May 4, 2011
is there a way to assigen a QoS service policy via Radius to an Caltalyst 4500/3750 Switchport?
in detail, we would like to assign this policy
policy-map SET_EF class class-default set dscp ef
to an interface. All traffic should be marked with a defined DSCP value.
This works find when doing it statically with
interface FastEthernet2/1 service-policy input SET_EF
but we would need to assign such a policy via Radius during the 802.1x Authentication. different users should get differnt policies. We use Cisco ACS 5.2 as Radius Server and there actually is a field for that in the Authorization Profile Common Tasks Configuration. in detail, this uses the cisco-av-pair "sub-policy-In=<policy name>" attribute to assign a service policy to an NAS.
we found also two other attributes "sub-qos-policy-in" and "ip:sub-qos-polcy-in" for that. CCO says that "ip:sub-qos-polcy-in" works with Catalyst 65k [URL]
unfortunately this seems to not work on Catalyst 45k and 37k.
In the ACS Logs we can see that these attributes are attached to the Radius Reply, but unfortunately they are ignored by the switch.
it is interesing that when entering "show aaa attributes" on the Catalyst 45k, these attributes are displayd - so for my understanding the switch should understand these attibutes (?)
4503-E#sh aaa attributes AAA ATTRIBUTE LIST: Type=1 Name=disc-cause-ext Format=Enum Type=2 Name=Acct-Status-Type Format=Enum
[Code]......
View 1 Replies
View Related
Apr 25, 2011
I am not able to configure Service policy output command in Cisco 2921 router.While configuring I am getting below error.Same config is working fine in Cisco 3845 router.I am suspectting the problem with license in IOS.
View 3 Replies
View Related