Computer Won't Detect Ethernet Cable - Dependency Service Or Group Failed To Start

Mar 7, 2012

My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".

View 5 Replies


ADVERTISEMENT

Windows 8 Pro - The Dependency Service Or Group Failed To Start

Feb 23, 2013

I've been working on my laptop recently, once finished i turned my computer off like most people do. After turning it back on hours later, i noticed that my laptop was connected to the internet router but had limited access which ment i could'nt get onto the internet ! So when I went onto Network and sharing center and nothing came up apart from ''the dependency service or group failed to start'' ...I don't want to use system restore or reset tools of windows

Current OS: Windows 8 PRO
Model: ASUS K43SV

View 1 Replies View Related

Dependency Service Or Group Failed To Start - Error 5

Jul 20, 2011

DHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.

View 1 Replies View Related

Dependency Group Or Service Has Failed Vista

May 18, 2012

My connection status icon has a big red x on it. I can't get on the internet. I tried the cmd stuff( ipconfig,netsh renewand release, and all the other jazz to do) my ip address starts with a 169 # I know that's not good. I go into my networks and I have no network. I go into my LAN ip4 and ip6and there are no addresses no were.I checked the LAN area status and it says not connected.

View 8 Replies View Related

Computer Doesn't Detect Ethernet Cable

Apr 25, 2011

I tried 3 cables, and even one of them was new. So im sure the problem isn't the cables. For some reason, whenever I connect a ehternet cable to my computer, I cannot seem to get internet connection through it. Some days ago I installed this Wireless Lan device from a CD, that came with a sort of antenne I had to put on my computer. It works great, BUT its slow. Thats why i would like to go on internet with cable again. I remember one day to another that my computer didn't detect the cables anymore, what could be the problem?

View 7 Replies View Related

Cabling / Cards :: Computer Can't Detect Ethernet Cable?

Aug 3, 2012

Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]

View 18 Replies View Related

Cisco Wireless :: 3355 Mobility Service Engine Failed To Start

Nov 14, 2012

After I initial MSE with the wizard. MSE take so long to start the service (more than 1 hour) with "Starting MSE Platform, waiting to check the status"Then I decide to reboot the appliance, after that MSE shows the message "Traceback (most recent call last) File "/usr/sbin/yum-updatesd", line 40, in ?import gaminImportError: No module named gaming.

View 7 Replies View Related

Cannot Start Server Service On Local Computer

Feb 22, 2011

System was running fine untill about two days ago. File and print sharing stop working. went to services and tried to restart "Computer Browser". It would not start due to a dependancy. Tried to start "Server Services" Got the following error. "Can not start Server Service on local computer, Error 2:The system cannot find the filed specified". The files srvsvc.dll 95KB 4/14/2008 The file srv.sys 327KB 4/14/2008.If I delete either of these files they are just created again. If I replace them with the new versions they are converted back to these files.I am running XP Pro SP3.

View 3 Replies View Related

Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC Won't Detect Ethernet Cable?

Aug 8, 2012

I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.

View 9 Replies View Related

ICS Dependency Service Does Not Exist Or Has Been Marked For Deletion

Jan 16, 2012

Let me try to give as much info as I can to start. Running Windows 7 64bit Ultimate have all updates as of 01-16-2012. Recently had some malware that I removed not sure if there is a correlation. I am trying to connect my wireless connection on my pc to a router to run xbox and BD player. So I connect to my wireless network have my network card plugged into my router, connected to both networks. I go to properties on wireless connection click sharing tab check allow other network users to connect to the internet through this computer connection, also checked allow other network users to control or disable the shared internet connection. I click ok and get a error window that says in the title bar Network Connections the body of the window says, "An error occurred while Internet Connection Sharing was being enabled. The dependency service does not exist or has been marked for deletion. I looked through services and device manager in non pnp drivers everything looks right to me... I am not super familiar with networking issues so I may have missed or overlooked something easily.

View 12 Replies View Related

Desktop Computer Failed To Detect Local Network?

Sep 21, 2011

My desktop failed to detect the local area network, but my laptop successfully detects that network. What may be the reason? Both the case, the green light is blinking (Means there is not problem with the cable/line ?). Is it a problem related to the network pin? The same desktop is successfully connecting through another line. So it means, it not an issue with desktop computer or it's configuration.

View 8 Replies View Related

Linksys Cable / DSL :: Unreliable Service And A Failed X3000

Nov 10, 2011

when I made the purchase for Linksys X3000. However, when I reached home and tried to use it. It auto reboot every 1 or 2 mins of usage. It's not just wireless affected but the whole thing rebooted. Reflash the fimware doesn't makes much different. Did a Standard 30-30-30 reset didn't solve any problem. Logged the case and informed linksys customer service that I'll go down to the retail shop for replacement. Case ID Given.On the 8th Nov, I went back to the retailer shop  and proceed to get a replacement. The shop was fine, they allowed for one on one replacement. However problem persist. This time it got worse, when I tried to flash the firmware, it got stuck at 98% for half an hour. So I got it rebooted. Next, It can't boot up and the power status shown Red color.

 I contacted the same customer service and inform them about the same issue with the replacement. Next I was given the address of the RMA Office at Funan L5-K3. Problem is, the address and location is wrong, the office became a Kawaii Koochi cosplay dessert shop.On the 10th Nov 2011, Checked the address in the net and some stated it's in Bishan and some stated it's in Funan. I called the Number given by the customer service and the line is dead. Called again, this time its Indian CSO and was told by the customer service that they're not operating after 7pm. But the problem is, it's only 5.30pm. Apparently they thought I was in US or Canada. So they transferred me to another customer service but nobody picked up the call. The fella just told me that hey, they not picking up so there's nothing he could do and that's it.I called a number started with 800-1204280, they told me that the office location is in Funan lvl 6 just beside the huge challenger store. I went down again at about 6.30pm and managed to locate the Service Center, I think it's third party as it cater for other product such as lenovo and other brand.This time the RMA center customer service told me that they doesn't carry any stock for replacement. I wasted so many trip just for one router. It's a very dissappointing service overall and this product is highly unreliable.

View 3 Replies View Related

PC Won't Detect Particular Ethernet / Though Both Cord And Computer Work

Aug 26, 2012

When I plug my ethernet cord into my Dell XPS laptop, Windows doesn't detect that I have a connection. I've tried another cord and it works (it's too short to use instead) and my roommate has tried my cord and it works fine on his computer.I've tried diagnosing the problem, disabling and enabling the Local Area Connection, but nothing seems to work.

View 9 Replies View Related

Connected Ethernet Cable To Ps3 But It Does Not Detect?

Apr 22, 2011

i acces internet on my pc using tata photon+ mobile broadband service,my problem is that i bought a ps3 and want to share internet connection with pc using ethernet cable via lan modem, for this i connected ps3 and pc using ethernet cable,i go to custom and wired setting of ps3 but my ps3 keep saying 'connect ethernet cable'.

View 7 Replies View Related

Computer Doesn't Detect Ethernet / Also Very Bad Range Over Wireless

Jan 6, 2013

So lately my computer's wireless network has started to get really bad, we have 100mbit, and it only gets about 0.3. This seems to be an issue with the range, or something, since if i move the computer right next to the router, it runs at about 50-60mbit. Now a few days ago i decided to get an ethernet cable to try and solve the issue, but my computer doesn't detect a LAN connection, only the wireless one ( atleast it doesnt show up among the other connections). Some weeks ago the wireless connection worked nicely, but now suddenly it doesnt anymore. Currently i'm typing this from an old mac computer, since my internet doesn't work at all on my pc.

View 11 Replies View Related

Laptop Doesn't Detect Ethernet Cable?

Sep 2, 2012

I recently moved into the dorms of my college and tried connecting my laptop to the internet using an ethernet cable. It worked, so I decided to try and play Xbox Live through the use of the ethernet cable and it did not work. After messing around with it and failing to get it to work for my Xbox 360, the ethernet decided to quit working for my computer as well. (To try and get my Xbox to connect to the internet with the ethernet cord, I tried network bridging by bridging the ethernet connection with the wireless connection, then unplugging the ethernet cable from the wall so as to connect it from my laptop to Xbox 360. This didn't work so I just deleted the bridge. This is when the problem started happening as the local connection stopped appearing.) I am able to plug it in and see that in the Network and Sharing Center, however, it shows up as being unplugged. After a couple seconds though, it disappears. If I click on it fast enough, it shows up with an Error Code 45 after looking at the properties. I have tried typing in ipconnfig /all and the ethernet connection doesn't show up there either.

View 16 Replies View Related

Cabling / Cards :: Can't Detect Ethernet Cable?

Sep 7, 2011

I'm having an issue with my network adapter. It's not detecting the Ethernet cable, thus not able to connect to my home network. The trouble shooter (Windows 7 home 64) says it canning detect the cord. But the cable works fine on my other computer. The network adapter is a Nvdia nforce networking controller. All the drivers are up to date. The computer was completely formatted so it's a blank slate

View 8 Replies View Related

Windows 7 / Unable To Detect Ethernet Cable

Feb 15, 2012

Today when I came home from school, I opened my computer like everyday. Suddenly I noticed that my Internet isn't working. It said I need to connect the Ethernet Cable. Well, my cable sometimes gets loose, so I tried to tighten it up a bit but that didn't work. I tried the cable with another computer and it works fine. I checked device manager and everything should be fine there.computer is running Windows 7 Professional.Drivers are up to date, and nothing changed in the computer since yesterday when it was still working. Could it be just that the Ethernet cable port suddenly broke down? I also tried another cable, and that didn't work either. I restored the system to previous saved point.

View 4 Replies View Related

Laptop Won't Detect Ethernet Cable From Router?

Feb 14, 2011

i have a DSL connection which is established using a dial-up (PPPoE) modem. I recently bought a wifi router, and I found that when I plug the cable to one of the LAN ports and the laptop, it seems as if it wasn't connected at all (not detected on either side).I tried to format the system running on XP and I installed windows 7 but the problem persists.The only thing I can think of right now is using a crossover cable, but I somehow doubt that it should work since I tried plugging the router to my netbook (using a normal cable) and it worked like a charm. But maybe the fact that it's a quite old laptop (PB MV51-101) has something to do?

View 8 Replies View Related

Dell :: C521 - Can't Detect Ethernet Cable

Nov 18, 2011

Since changing battery my Dell C521 won't connect to internet. When I run set up CD it says it can't detect ethernet connection even though cable is connected.

View 1 Replies View Related

Ethernet Cable Not Detected After New Service Installed?

May 14, 2012

I switched from DSL to cable about a week ago, I have two desktops connected via ethernet cable to the modem. One works fine, the second stays connected for 5 seconds, disconnected for 5 seconds, connected, again, etc until the system is on for 45 minutes or so and then it stays connected. I feel like it is probably a setting and that the system is trying to detect something during that time. Problem is I have no idea where to start and Comcast is totally useless. I have already replaced the cable because that's what they said the issue was, it wasn't.

View 2 Replies View Related

What Makes A Computer / Laptop Not To Detect A Hardware Network Cable

Oct 15, 2011

I tried connecting someone else's laptop to a network cable but the laptop refused to detect the hardware device plugged?

View 1 Replies View Related

Cisco Firewall :: ASA 5510 / Ip Service Object And Service Group

May 16, 2011

When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
 
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq

[code]...

View 8 Replies View Related

Computer Won't Recognize Ethernet Cable?

Jul 30, 2011

I just received a computer from a relative since they do not use it anymore. I just reformatted the hard drive and I can't seem to get it to connect to the internet. Every time I try my computer says there is no ethernet cable connected but I know it is. I read around on the forums and one thread (that is now closed), was about the same problem and to diagnose the problem they asked to use IPCONFIG/ALL in the cmd.exe. The results are this:

Windows IP Configuration

Host Name: bouss
Primary Dns Suffix:
Node Type: Broadcast

[Code]....

View 5 Replies View Related

Computer Freezes Up Once Ethernet Cable Is Plugged In

Sep 5, 2012

I've got a wireless adapter for my desktop and thats what i've been using for years to connect, but now i'm am trying to get a more reliable connection by having the ethernet cable plugged in. Problem is, as soon as I plug it in the whole computer gets extreamly sluggish or sometimes freezes up completely. If I am very patient, I can very slowly do something things. If I open the browser, it probably takes a minute for it to load. Opening the control panel, the window pops-up but none of the icons will appear until it times out. And trying to use the network icons on the taskbar to get into network settings is impossible. Weird thing is as soon as I unplug it and turn the wifi back on, the PC starts responding super quick again within seconds.

View 9 Replies View Related

Diagnostic Policy Service Cannot Start

Apr 8, 2011

I am Using Windows 7 32-Bit, and my Network usually works fine, and my internet has been working fine up until recently. However about a month (maybe more) I noticed a problem that kept cutting me off occasionally and said Diagnostic Policy was not started, I troubleshooted it and it was fine. Much more recently this has been happening more frequently and troubleshooting it doesn't solve the problem. I can get online for 10-15 Mins then I am cut off again. Restarting the computer often fixes it but not always. I went to Services and found the Diagnostic Policy Service is not running, I press start and receive this error message.

The Diagnostic Policy Service service on local computer started and then stopped. Some services stop automatically if they are not in use by services or programs.I am quite sure my loss of Internet is due to this as this is a network related service and what the troubleshooter always finds to be the problem. Other Computer/Devices in the house connect to the internet fine with no loss of connection so it has nothing to do with that. I have tried various fixes like uninstalling network adapter drivers, and checking permissions in Registry but it has not worked.

View 4 Replies View Related

Split Ethernet Cable One To Computer Other To Wifi Router

Dec 13, 2011

I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.

I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.

View 7 Replies View Related

Ethernet Cable For Connecting Computer To Router Is Not Working

Jun 13, 2011

My Ethernet cable connecting my computer to my router is not working. It was just working a few days ago and I have connected it to a different computer and it worked on that

View 1 Replies View Related

Evo W4000 Computer Freezes When Ethernet Cable Plugged In

Apr 12, 2012

Compaq Evo W4000 with XP professional.Comp works fine when no ethernet cable plugged in - after 10 secs of plugging it in - it freezes Have run malware bytes and combofix already - no change.Disabled everything in startup menu and non Microsoft services Works OK in SAFE MODE with networking though

View 17 Replies View Related

Connect Laptop To Computer Using Ethernet Crossover Cable?

Jul 30, 2011

i use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro

View 1 Replies View Related

Dell :: Inspiron 1545 Wi-Fi Service Will Not Start?

Jan 15, 2012

copy of system info file wifie and network service will not start. services are enabled in dell boot when F2 used in start up. I can see from this that the media is disconnected. How do I connect the media?

OS Name:                   Microsoft Windows 7 Home Premium OS Version:                6.1.7600 N/A Build 7600OS Manufacturer:           Microsoft CorporationOriginal Install Date:     04/06/2010, 17:53:05System Boot Time:          16/01/2012, 23:18:39System

[Code].....

View 1 Replies View Related

Cisco :: Prime 4.1 - Unable To Start Topology Service

Mar 11, 2013

Im having trouble with the topology service. Java is installed, but i cant start the topology service.

View 7 Replies View Related

Cisco :: LMS 4.0 - Service Ciscoworks Daemon Manager Does Not Start

Sep 11, 2011

After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.Following is the error:ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved