Intel Radio Wifi Turns Itself Off
Jan 24, 2013
This first started happening a couple of weeks ago when a piece of software was put on to the computer off an external hard drive. First the wifi would turn itself off but after turning it back on it might happily stay on for a few hours before switching itself back off.The day before yesterday it decided to start turning itself off straight away. I plugged in with ethernet, uninstalled the old drivers and reinstalled new ones, this didn't seem to do anything so I turned on my firewall and titanium defense and after a while it decided to start working again.Earlier today I connected my DSLR camera to my USB 3 port to download pictures, this killed my wifi straight way. I reconnected with ethernet and I'm not sure what I did but now the wifi has decided to work again.
View 4 Replies
ADVERTISEMENT
Aug 11, 2011
I have a Dell Intel 3945abg wireless. Its work great for the time I've been using it...until today. I have the red cross on the icon and it will not enable even though everything else checks out. I've uninstalled and installed the drivers and it is recognized.
View 1 Replies
View Related
Jan 9, 2013
just three days ago my wi-fi quits working when the computer goes to sleep mode. The box in power management is unchecked. This seems to have started after a McAfee update that created screen blanking issues corrected by Dell and McAfee. I can find no reason so have turned off the sleep. Device driver is up to date.
View 3 Replies
View Related
Mar 3, 2013
Apparently when watching TV after the show is over and the TV is turned off the lights on the router dims and their wifi router is not able to be found any longer and they have to reset the router in order to find it again. I downloaded the newest firmware version 4.21.5 yesterday since they had the original firmware from years ago thinking this may solve the problem. It worked for a day and then stopped with the router having the same symptoms. They have this router located very closely to their plasma TV for the past 3 months, however, I was reading that wifi routers do not cause any interference with plasma TVs. They had this router placed near their old rear projection TV for years and never had any problems.Could the router be going bad? Could the router be too close to the TV?
View 2 Replies
View Related
Oct 7, 2012
Do I turn on my wifi radio using windows vista with safari web browser?
View 1 Replies
View Related
Sep 17, 2012
I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
View 1 Replies
View Related
May 13, 2013
Host Name: BOBOS Name: Microsoft Windows 7 Home Premium OS Version: 6.1.7601 Service Pack 1 Build 7601OS Manufacturer: Microsoft CorporationOS Configuration: Standalone WorkstationOS Build Type: Multiprocessor FreeRegistered Owner: Registered Organization:Product ID: Original Install Date: 27/11/2009, 10:18:51 PMSystem Boot Time: 6/05/2013, 7:51:57 PMSystem Manufacturer: Dell Inc.System Model: Studio 1745System Type: x64-based PCProcessor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~2801 MhzBIOS Version: Dell Inc. A04, 22/03/2011Windows Directory: C:WindowsSystem Directory: C:Windowssystem32Boot Device: DeviceHarddiskVolume2System Locale: en-au;English (Australia)Input Locale: en-us;English (United States)Time Zone: (UTC+10:00) Canberra, Melbourne, SydneyTotal Physical Memory: 4,091 MBAvailable Physical Memory: [Code]....
View 6 Replies
View Related
Jun 14, 2011
I have the same issue and have been surfing the web for the solution for quite some time. Brand new Sony VAIO laptop with blu-ray has an Intel WiFi bgn 1000 wireless network adapter. It worked fine for couple of days, until i brought it to work. We use wireless connection in our office. Maximum 7 computers are connected at a time. All other 6 laptops connect to our network with no problems (all of them are on win7x64). Now, back to the problem. Wireless works at home and at work in the evening , when no one in the office. I've removed all 3rd party software, uninstalled Intel software. Am using clean driver from the Intel website. Tried different revisions of the driver - issue is still there. I've contacted VAIO support. This is not known issue to them. They offered standard actions (unisntalling the driver, power management options, enabling VAIO Smart Network). No updates of fixes on their support website. I have also checked in the event viewer. There is only one service being enabled and disabled constantly (TCP/IP NetBIOS Helper) - which is happening at the same time with wireless drop. There are about 5-8 drops per minute. Computer browser service disabled. Firewall disabled, antivirus disabled. We assume this could be an interference with mobile diveces. While now, we have disabled all wireless cards on all computers, switched off mobile phones. And... AXAXAXAXA!!! BSOD 0x00000018 (0x000....00, 0xFFFFFA800754A750, 0x00...02, 0xFC01020EFC01020B).
View 5 Replies
View Related
Jul 19, 2012
I've had this problem for a while. I'd only get a dial-up icon with a red cross after startup or diagnostics, and no wireless networks could be detected. So I installed the HP wireless assistant, and restarted the laptop. It started working fine. Today, the icon went yellow with limited access, so I ran troubleshooting. And the problem was back. The dial-up icon reappeared, and the wireless assistant showed the WLAN was disabled. I checked the device manager. The wifi link 5100 AGN had a yellow mark on it, and in properties tab, it said ' the device is not working '. I scanned for hardware changes, and the 5100 AGN disappeared ! I restarted my laptop, and now its nowhere to be seen. Even the wireless assistant now shows only 'Bluetooth' as a connection.
I have an HP HDX16 1140us laptop.
View 1 Replies
View Related
Jan 5, 2011
I have Dell Vostro 1500, i was reinstalling my latop today, and when I try to install Intel PROSet/Wireless WiFi Connection Utility, there is a error at the end of the installation "Driver is not installed, a problem with this connection has been detected" , the internet is not working.
View 2 Replies
View Related
Oct 1, 2012
So every few minutes; in no pattern, my laptop internet will turn off then reconnect.I have noticed that it does it mostly at night where I am most active on my laptop.I am using a external wireless adapter to make my connection somewhat "better" but I am not sure if that is the cause.
View 1 Replies
View Related
Jun 19, 2011
Just replaced Dir 625 with Dir 655. I have Sony KDL 46NX700 TV. When the router is on the tv turns off and on, like a reboot. The longer the tv stays on the longer between the reboots. Also if the wireless device is turned off in tv settings it does not turn off and on. Have talked to Sony, they can't resolve the problem. Had me call local repair. He thinks it may be the power supply. He said he would order one. That was before I discovered it was the wireless signal causing it to turn off and on.
View 4 Replies
View Related
Nov 1, 2011
I have a 2wire modem and I'm using att DSL. The internet was working fine, I went out of town for 2 days, I returned to find my internet wont work. During the time I was out my brother said it hadn't worked for the 2 days. The modem works fine and all lights are green when my desktop is turned off or not connected. It even lets my brother use wireless on his laptop. However, when I turn on my computer or when I connect it to the modem with an ethernet cord, the DSL light will go red and not work.
View 7 Replies
View Related
Nov 1, 2011
When I first got my DIR-655 (Hardware version B1) the Wireless would keep on turning itself off, and it needed a reboot of the unit to turn it back on again.After having upgraded to the 2.03NA version of the Firmware it seems to be working correctly and hasn't turned off for a few days now.
View 14 Replies
View Related
Mar 29, 2011
He has a Linksys wireless router installed. He only uses the router for use with lap top for the wireless convenience around the house. The desktop PC is Ethernet wired;.
When both laptop and PC are shut off, and then he, in another room turns on the laptop, the Desktop PC start up all by itself.
Is there a setting on either of these PC or router that need adjustment?
View 6 Replies
View Related
Oct 30, 2012
I have this problem yesterday when I was surfing the internet when suddenly my belkin router turns off. This router is working just fine in the beginning when we have this. When I troubleshoot, it says about the ethernet cable. When I plug it to the ethernet slot on the back of my computer, it would not flash an orange light. Am I required to buy another ethernet cable or it's just my router who had just lost power?
View 5 Replies
View Related
Mar 28, 2013
Dell Inspiron 14 3420
I have bee trying to make WOL work with no luck so far. The problem is that when I shut down my laptop (connected to AC power) the NIC also shuts down. I already unchecked the box "Allow this computer to turn off this device to save power" in the power management tab in advanced NIC properties.
I noticed that when I force shutdown my laptop (press the power button for 5 seconds), the NIC stays on and WOL works, but when I perform a regular shutdown, the NIC shuts down when windows shuts down.
View 6 Replies
View Related
Oct 25, 2012
Essentially when my friends computer disconnects from the router, everyone elses computers cannot access the internet, even though windows says they are still connected.
View 1 Replies
View Related
Jan 4, 2013
I am connected to a public wifi in my building thru built-in adapter of my laptop. I am running Windows 7 Home Basic. The connection allows only one device to run on one login name. I need to share this connection with my other device by turning my laptop into hotspot or thru ethernet. I have tried using Virtual Wifi Miniport and Connectify. I have tried LAN also. But I encounter the same problem in all the cases. As soon as I turn on internet sharing thru the properties of my public wifi connection, the Virtual Wifi or the LAN turn "Unidentified" and there is no internet on my other device. I even tried using a usb wifi adapter to connect to public wifi and sharing the internet over my laptop's adapter and vice versa but to no avail.
View 1 Replies
View Related
May 16, 2012
I have a 128mb connection with a sa 500 series fw/router. When I turn on the ips function my throughput drops to 15 Mbps and the CPU max goes up to 100%. What gives?
View 2 Replies
View Related
Dec 29, 2011
I have a DIR 601 with a actiontec GT701D modem.When I shut down my computer the globe on the router goes from green to orange.The modem people say their modems are always on Am I missing something on the DIR601?why?
View 5 Replies
View Related
Sep 12, 2012
We have one cisco core switch 6500 series which was configured portchannel on several gig interfaces. This port is used as a trunk to enable communication between VLANs. The VLANs is where several high-end servers/hosts reside.After we disable / unbind the portchannel, the port turns amber. The following is what we did on the interface
1-no switchport command
2- make the port as access mode #switchport mode access
3- shut and no shut
4- clear arp
5- clear mac
what else can we do on that particular interface. It is just on that particular interface, the rest are ok.
View 7 Replies
View Related
Aug 21, 2011
Want to use WOL on 8300 with Broadcom Netlink card. Everything seems to be configured correctly: bios, network card, port forwarding etc. In fact I can wake up the 8300 over the internet following a complete shut down, but only if I do it within 3 secs or so, then it fires up OK. If I wait a little longer it will not respond to the Magic packet. I notice something strange which I suspect may be related: when I restart the PC, in the power management of the Broadcom card the box is checked that allows te computer to turn off the Broadcom card to save power, while I am sure that I unchecked it before shutdown. I suspect this setting is somehow overwritten by Windows. mentioned all BIOS setting are to enable WOL. As if Windows is ensuring that the Broadcom card is powered down so it cannot receive the Magic packet to initiate a startup.
View 8 Replies
View Related
Sep 29, 2011
So I have a Toshiba Satellite L555D-S7005. When I put it into Hibernate mode (I dont like turning it off, takes too much time) it paralyzes my whole wireless network. It makes it so that anybody else on WIRELESS gets disconnected, and cannot reconnect easily (they must restart the router). This gets very irritating when my brother is on the X-BOX/Laptop and he cannot continue playing games or whatever. If I disconnect my laptop the network goes down for them, but not for me. I can log right back on and connect with no problems. The wired computer has no problems with internet when I turn off my laptop.
View 5 Replies
View Related
Oct 16, 2012
My WAP4410N AP is running version 2.0.2.1 firmware which is quite old. There are newer firmware releases available which I'd like to upgrade to (fix the known bugs, etc.).
So I upgrade my firmware from version 2.0.2.1 to any of the following versions:
- 2.0.3.3
- 2.0.4.2
- 2.0.5.3
The AP reboots and my settings are all still there.
I go to change any of the settings I have - DNS, Time Zone, PSK, any field which can be edited and click Save.
The Save takes place and the screen refreshes to the old settings - the new settings don't stay in place after the Save.
I've also factory defaulted the AP prior to the upgrade, upgraded and then been in the same place unable to save any changed settings.
System details:
Information PID VID: WAP4410N-E V02
Device: WAP4410N Wireless-N Access Point with Power Over Ethernet Software Version: 2.0.2.1
View 4 Replies
View Related
Mar 22, 2011
I have three pairs of ASA5510 firewalls, each pair configured as a failover pair. When each pair boots up, even if I boot up the primary first, when they are both up and the primary/active syncs to the secondary/standby, the primary always switches to standby and the secondary thus becomes active.
What would cause this? It happens on all three pairs. Does failover look for the highest ID or IP address to determine which of the pair will be active?
View 1 Replies
View Related
Feb 18, 2013
Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.14.4
Recently in the morning the router will have lost ability to connect to internet <internet light is on> and I cannot access the router page <sys light solid> from either wired or wireless connections. Why is this and will it be solved if I upgrade firmware?
View 2 Replies
View Related
Aug 20, 2011
i have a latitude e6410atg and it says the hardware radio switch is off. if i restart the computer the wifi light comes on but after approximately 5minutes it just shuts off. this continues to happen regardless of how many times i try it.
View 1 Replies
View Related
Nov 26, 2011
Is there anyway to add something to my radio, maybe something to plug into the additional speaker slot, that will allow me to listen to my radio on a bluetooth wireless speaker?
View 7 Replies
View Related
Apr 29, 2011
can i create my own a signal
View 1 Replies
View Related
Jan 4, 2012
How to turn on my hardware radio on?
View 1 Replies
View Related
Feb 16, 2013
I have a westell DSL modem/router supplied by Frontier. It connects only to the telephone line and via cat5 to my main router, a cisco EA6500. Everything seems to be working fine, I just would like to understand a few things.I disabled wireless radio on the westell, enabled it on the cisco, so I have just one WIFI network active.I know I am not supposed to have two DHCP servers active, but I did not know how else to be sure the CISCO would get a good address, so I left DHCP active on the WESTELL, and also enabled it on the CISCO to provide service for the rest of the net.The WESTELL admin interface is at 192.168.1.1, and assigns addresses in this range.According to the WESTELL, the CISCO is at 192.168.1.27, which I assume was assigned by DHCP.The CISCO has an admin interface at 10.144.224.224, and assigns addresses in this range to all the other devices on my net.As I say, everything works.I can access both router admin pages with a browser on my main 10.144.224 network, and can ping both.But I don't understand why it works.What rules allow me to talk to the WESTELL admin page from the CISCO private network, but do NOT propagate the DHCP access which is at the exact same IP address.
It is great that it works. But should I really have disabled DHCP on the WESTELL and assigned a static address to the CISCO? Or is this situation actually provided for in the rules, not just a lucky accident that it works?Why does the scanner say that the CISCO DHCP is "Unknown" rather than Authorized or Unauthorized? Is there something I can or should do to get it to be "Authorized"? I can ping 192.168.1.1, but not the 192.168.1.27 (times out), and yet when I ping a non-existent 192.169.1.3 I get "Reply from 192.168.1.27: Destination host unreachable".
View 4 Replies
View Related
Mar 17, 2011
I can't find out how to turn on my wireless radio on IBM T41p. The Fn+F5 does nothing. I do not have internet because of this.
View 2 Replies
View Related
