Hp 5102 Takes Long To Start?

Aug 31, 2011

my hp 5102 takes long to start.

View 1 Replies


ADVERTISEMENT

Wireless :: Card Takes Very Long To Start Up After Boot?

Sep 27, 2012

My wireless connection takes about 5 minutes to actually work once I reboot my windows computer. Once I start it, the wireless indicator in the bottom right corner of the screen shows that it is loading, but then freezes and doesn't let me use most applications on my computer. Then all of a sudden it will so a wireless signal and connection and everything works just fine. On the other hand, when I use the function key on my keyboard that turns off the wireless card before I restart my computer, the wireless stays off when I reboot. Then I turn it back on using the function keys and my wireless will connect automatically. Why is it that the wireless card/connection won't start up quickly if I just leave it on like people always do normally? Why is it that I have to toggle it on/off all the time for it to work connect quickly?

View 3 Replies View Related

Laptop Takes Too Long To Connect To A Network?

Sep 19, 2012

Every time i boot up my laptop the little blue ring in the lower right corner just completely stops and it keeps me from opening anything and i have to wait at least 2 to 3 minutes to start up?

View 3 Replies View Related

Linksys Cable / DSL :: WAG-120N Takes Long To Boot

Nov 7, 2012

I have WAG-120N ADSL Modem+Router which I am using for the last two years. Recently It has started taking about 2-3 minutes to show any sign of life after it is powered on. When powered ON no light comes up until 2-3 minutes. Then Internet light goes red for about 2 seconds then power light goes on followed by all lights then it starts booting normally i.e. Power light stars blinking, WiFi light blinking, power light stabilizes, DSL light starts blinking, WiFi light stabilizes followed by DSL & Internet. When ON it works perfectly alright until switched off.

View 7 Replies View Related

Very Slow Wireless Internet - Takes Long Time To Find Router On Pc

Sep 25, 2012

When I start-up my computer, it takes over an hour to find my router on my computer (Not on my brother's computer, or the computer upstairs). Once it does, it connect perfectly. This is very annoying because I do not have a lot of time anyway to work/play and when I do, it takes over an hour to find the router.Recently, I have been having HUGE lag spikes, constantly disconnecting from games and skype calls.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 Takes Long Time To Recognize 3G Modem?

Mar 14, 2013

Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange

The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.

View 5 Replies View Related

Linksys Wireless Router :: Wrt310n Takes Very Long To Connect To Network?

Sep 28, 2012

When I boot my system lately I have to fiddle with task manager to get things stable enough to connect to my network. This is getting very tiresome. I always find OdHost.exe taking almost all the CPU and have to kill it to get things running. This can't be normal and has not been until recently. I don't know of anything that has been installed in the last several months that is network related.

View 1 Replies View Related

Cisco Switching/Routing :: 6500 How Long Conversion Process Takes Place

Dec 5, 2012

We will be converting two 6500s to VSS. Each chassis has a Sup2T module, fwsm, 6908-10G blade, wism1 blades and two or three 6748-SFP blades. I was wondering how long the conversion process takes?  If I remember correctly at the 2012 networkers lab it took maybe 10 minutes while using Sup720s.  The instructor mentioned that with Sup2Ts it would convert a lot faster.

View 3 Replies View Related

Cisco Switching/Routing :: 3750x Stack - LACP Waiting To Be Aggregated Takes Too Long

Oct 26, 2012

I have configured a portchannel with 3 ports - lacp active mode I want to pxe boot esx server with Hp Proliant DL 360 G7.
 
During Pxe Boot the physical Interfaces must be in (I) state - standalone.
 
The server receives via dhcp the ip but after getting the ip the link goes down for a short time and the switchport goes down and then in (w) state - waiting to be aggregated. Now the server tries to load via tftp the image but the server gets a timeout because the switchport is in state (w). It takes a long time til the switchport comes back in standalone mode (I).
 
Is it possible to modify the time how long the switchport is in the waiting to be aggregated state on 3750x ?
 
Would the right command be lacp rate-fast? But this command is not available on 3750x, only 6000 series.

View 0 Replies View Related

Cisco Switching/Routing :: Why Boot Up Takes Long Time - Aironet 1200 Series

Nov 24, 2011

I have a Cisco Aironet 1200 Series Access Point. It takes long time to boot up.
 
After showing the warning banner message it takes long time before asking for username.
 
The sh version is given below.
  
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA4, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Tue 05-Sep-06 14:15

[Code].....

View 3 Replies View Related

Wifi On Acer Aspire 5102 Stopped Working After Os Re-installation

Apr 18, 2012

After reinstalling the os on my Acer Aspire 5102 I can no longer use wifi to connect to internet. Control panel does not chow any wifi card. However the wifi light on the front panel does switch on.

View 1 Replies View Related

Takes A Minute To Load A Picture?

Aug 22, 2011

I did a speed test and everything seemed good. Dl speeds at 16mb/s and upload speeds at .99 mb/s. However when I go to websites and load pictures it takes like a minute to load. Why is that?y speed seems fine when I test it, but slow to load stuff.

View 1 Replies View Related

After Startup Computer Takes About 15 Seconds To Identify LAN

Dec 20, 2012

After startup, the computer takes about 15 seconds for it to identify the LAN.

View 1 Replies View Related

Dell :: XPS 17 L702x Takes More Than Usual To Boot

Nov 26, 2012

I have notice that my XPS 17 L702x takes more than usual to boot than before.

View 5 Replies View Related

Routers / Switches :: Any Router Which Automatically Takes Bandwidth

Apr 8, 2011

I am using using 2 broadband with tp-link dual wan router 10 pc using the broadband.does any one know about the router who controls bandwith there is option available in Tp-Link Dual wan router but its not working...is there any router which automatically takes bandwith and allow as per my details.

View 1 Replies View Related

Can't Access Router Takes Me To User Agreement Page

Nov 27, 2011

i need to access my routers settings. i have my default gateway 192.168.21.254 . i enter that into my web browser, and it takes me to a user agreement page. the whole purpose of this is to set my NAT type to open on my xbox 360.

View 3 Replies View Related

Cisco :: LMS 4.2 - Takes Time To Remention Device Reachable

Nov 29, 2012

I ve recognized some strange issue with LMS 4.2 , when the router becomes down or unreachable , the LMS doesn't send any event as Faultview,also when the router comes back online the LMS takes 1 hour to show its state as  reachable.

View 3 Replies View Related

Cisco :: LMS 4.0 Takes Lots Of Resources And Also Stops Responding

Sep 10, 2011

How to fix our LMS 4.0 high CPU issues?. It takes lots of resources and also some time stop responding.

View 7 Replies View Related

Cisco Firewall :: FWSM With 4.1(1) Takes More Time To Compile ACL

Mar 24, 2011

We are using a service module with 4.1(1) that takes more more time to compile ACL.So we need to wait more time to permit and capture traffic.

View 1 Replies View Related

Cisco VPN :: Connection Takes 10 Minutes For AnyConnect VPN Client V2.3

Apr 28, 2013

I am using Cisco AnyConnect VPN Client v2.3.0254 and ever since i upgraded my laptop from the Lenovo T420 to the Lenovo T430 the time it takes to connect via VPN has increased drastically. Connecting via VPN on my Lenovo T420 would take as little as 5 seconds to authenticate and connect while connecting with my T430 is now taking at minimum of 5 minutes, sometimes upwards of 15 minutes only to report back an error!
 
The screen the AnyConnect VPN Client seems to hang on is "Establishing VPN - Initiating Connection..."
 
The server is enforcing that McAffee is installed and up to date, however i have already made sure that my McAffee install is valid and up to date.
 
I have already taken these steps to try to correct the issue: Re installed Cisco AnyConnect VPN ClientRe installed & updated virus definitions for McAffeeRan CheckDisk on my primary OS partitionRan RAM validation utility to verify no bad sectors  I have attached a screenshot of the error log from AnyConnect as well as the log html file.

View 2 Replies View Related

The Wifi Appears To Connect But No Internet Connection Takes Place

Jul 25, 2012

we have several Dell machines using W7 and all of them are exhibiting the problem of not connecting to some wifi sources. The wifi appears to connect but no internet connection takes place.

View 1 Replies View Related

Cisco :: How Replication In Cucm Servers In A Cluster Takes Place

Sep 10, 2012

How does Replication of cucm servers and other servers like unity presence and all in a cluster take place?

View 1 Replies View Related

Cisco :: Setup Translation Rule That Takes Any Three Numbers Starting With 4

Jan 3, 2012

I am trying to setup a translation rule that takes any three numbers that start with a 4.. and translate it to 14.. I have tried a few ways of what I thought would work but nothing is working.

Examples of what I have tried:

rule 2 /(...)/ /1.../
rule 2 /4../ /1.../
rule 2 /4../ /11/

This is the rule that I use to delete the 1 when traffic flows out of my voip system.

rule 1 /^1(...$)/ /1/

View 2 Replies View Related

Cisco WAN :: 4503 - HSRP Switchover Takes 7-8 Ping Losses?

Apr 7, 2011

I have two 4503 switches connected individually two 5510 Asa. My web server is under 5510 dmz interface. From Two 5510 Asa dmz interface  there are two cables connected to two individual server farm switches.The web server in connected to this server farm switches.My local lan in connected to a cisco linksys switch. from that two cables are connected two individual 4503 switches on same vlan. i configured hsrp on this vlan. i pings the web server from local lan. when i unplugged one cable from Primary switch then it take 7-8 request timeout to recover into Secondary switch. it takes about 40 sec to switchover. it takes too much time. i also tune the timers but no luck. My Primary switch is also a Root Bridge.

View 7 Replies View Related

Cisco WAN :: 7609 Change BGP Policy Takes Effect Immediately

Sep 15, 2011

I just update my cisco 7609 to Version 12.2(33)SRD6. I encounter a strange problem with this version, everytime i change BGP policy ( input or output ) this will take effect immediately without "clear ip bgp neighbor <address> soft". Are there anyway not to take BGP policy affect unless command "clear ip bgp neighbor <> soft" ?

View 7 Replies View Related

Dell :: Inspiron N5110 Takes Ages To Connect To Network

Oct 25, 2012

I have a Dell Inspiron N5110, service tag

<ADMIN NOTE: Service tag removed as per privacy policy>

This never used to happen but has been occurring for about 5-6 months without an end in sight. The problem is that it takes ages to connect to a network and that networks are not joined automatically. Basically, whenever I open my laptop from sleep, I will see the little blue rotating symbol in the bottom right hand of the screen and it stays there for 2-3 minutes (usually) before it connects. Windows usually pops up an icon which says 'it is taking longer than usual to connect to the network' and it seems to often successfully connect when the connection attempt times out.

Steps I have taken to fix the issue:

- Update the network driver (it is up to date).- Never allow the system to turn off the wireless network adapter (via  device manager).- Check that the network has 'join automatically' ticked in the settings. 

View 1 Replies View Related

Gateway NV54 Laptop / Two Same-model Laptops / One Takes Forever To Connect

Feb 7, 2011

Problem: I bought my wife and I each a Gateway NV54 laptop this past year. While both of our laptops can acquire a network connection, she is able to browse the internet almost immediately, while my computer takes 30 seconds to a minute longer to connect to the same network, and then can take up to 3 minutes before any web browser recognizes the connection. This happens on every connection I make (school, work, home, etc.)Steps I have taken:

-Updated the driver for my wireless adaptor (Atheros AR5B93 Wireless Network Adapter), and nothing changed.

-Windows 7 service pack (6.1)

-Downloaded AVG, Spybot, Advanced System Care, and IObit Security and run scans in all 4 at least 3 times a week.

-Cleaned up hard drive files so that each of my two hard drives is less than 70% full.

-Removed superfluous internet connections and prioritized the important connections I use regularly.

View 1 Replies View Related

Linksys Wireless Router :: WRK54G Takes Several Minutes To Connect To Youtube?

May 26, 2012

I have a WRK54G v2 connected to a Ubee cable modem, and when my computer, connected with wifi or ethernet, tries to play a Youtube video, the actual webpage loads fine but the spinning dots in the player remain for several minutes before the video starts to load. If the video has to buffer again in the middle of playback, it also takes several minutes to start again. When the computer is connected directly to the cable modem, everything works fine. Youtube is the only site I am having an issue with, other video streaming sites like Vimeo work fine.

View 9 Replies View Related

Linksys Wireless Router :: E4500 Reboot Takes Half Hour

Dec 31, 2012

Not sure if I have a defective router, but if I unplug it I then need to wait at least a half hour to plug it back in. Anytime sooner and it won't broadcast a SSID or connect to the modem. This is a huge inconvenience if you want to change router settings and then you need to restart.

View 1 Replies View Related

Cisco Firewall :: 5520 Takes Several Attempts To Pull Up Any HTTPS Pages

Dec 17, 2012

I have a TAC on this, but thought I would throw it out here too.  We recently upgraded a 5520 to 8.4 code so HTTPS traffic can filter through the CSC. Well, it takes several attempts to pull up any https pages. Cisco thought it may be hardware, so I swapped out the CSC, but before I go through the hassle of moving licnese, I brought a second ASA with CSC, which prior to this was their main ASA running 8.2 code and did not have issues, of course HTTPS did not filter through it either. the exact same thing happened on this ASA.  So apparently it is not hardware related. One other thing I found, if I bypass https, it still happens, and the only solution is to shut down the CSC module.  Now I think it may be the ASA policy that while not the cause, but is being difficult.  I found that if you pull SIP inspections out, and reapply them in testing voice issues, you must reboot the ASA for them to work again. I am wondering if this is the case with the HTTPS traffic not releasing from the CSC even with the ACL having it removed. I need to try that next.

View 4 Replies View Related

Cisco WAN :: 2911 / Multiple Video Conferencing Calls Takes Down T1 Connection

Jan 8, 2012

I have only seen this problem with several video conferences from one location.  Currently there is only one T1 connection from our HQ to remote location.  When two conference calls are set to use 256Kbps connection to come back to the main HQ, after an hour or so the T1 connection would drop.  What I mean about drop is that the route on the 2911 will disappear.  I have to wait about 10 minutes for the connection to come back up or I have to reboot the router for the connection to appear again.  There are no interface drops on the serial connections or ethernet connections.
 
HQ - 2911
Remote - 1821
 2911 running config:
 Current configuration : 3529 bytes
!
version 15.0
service timestamps debug datetime msec

[code]...

View 8 Replies View Related

Dell :: Inspiron E1705 - Wireless Card Takes Forever To Load

May 12, 2007

I have an Inspiron E1705 and my wireless card/adapter takes about 3 minutes to load each log in. I called Dell, and they couldn't find out what was wrong. We tried things from internet settings, to shutting off all the start ups in MS Config. I've had this problem for a very long time. Windows will start up, and it seems like there is a 3 minute wait period of my computer doing nothing, and then finally, the wireless loads in my System Tray.

View 14 Replies View Related

Dell :: Latitude E5430 - Connected Wireless Takes Too Much In Opening Website

Mar 2, 2013

I have 2 laptop one is dell latitude e5430. Its wireless is doing problem... Whenever i connected my wireless i takes too much in opening website.... while on other one it is fine.... ON BROWSER ITS WAITING FOR GOOGLE.COM

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved