Cisco WAN :: 2911 / Multiple Video Conferencing Calls Takes Down T1 Connection
Jan 8, 2012
I have only seen this problem with several video conferences from one location. Currently there is only one T1 connection from our HQ to remote location. When two conference calls are set to use 256Kbps connection to come back to the main HQ, after an hour or so the T1 connection would drop. What I mean about drop is that the route on the 2911 will disappear. I have to wait about 10 minutes for the connection to come back up or I have to reboot the router for the connection to appear again. There are no interface drops on the serial connections or ethernet connections.
HQ - 2911
Remote - 1821
2911 running config:
Current configuration : 3529 bytes
!
version 15.0
service timestamps debug datetime msec
[code]...
View 8 Replies
ADVERTISEMENT
Oct 23, 2011
I'm trying to put together the best scenario for a large business to set up videoconferencing between users within the states and overseas. From my understanding, the company would have to set up a MCU to manage multiple audiovisual sessions. Then implement an SIP software such as Asterisk, with a registrar server to maintain a database with information about the network addresses of each user on the domain.The diagram in my head is something like this:
View 1 Replies
View Related
Nov 2, 2011
I am trying to
-capture and synchronize video and audio
-compress the captured data
-transport the compressed data using suitable protocols
-decompress the received data at the other end
-and finally playing it over the LAN.
So, which protocols should I use: H.323 or RTSP or anything else?Which are the best suitable APIs for the above steps?
View 1 Replies
View Related
Feb 28, 2011
i want to establish a video conferencing system based using desktop computers so that at a time about 7-8 users are in a video conference simultaneosly. i have the media connectivity already established i.e on OFC. will i have to make a server.
View 5 Replies
View Related
Jul 10, 2012
Can I get video conferencing for my mac os x PowerPc?
View 1 Replies
View Related
Sep 5, 2011
We have a Cisco 1841 router at Branch end and a Cisco 2821 router at the HO connected by a 2MB Leased line. There is a Video Conferencing device setup in the branch office . We want to reserve 1MB bandwidth for the video conferencing and leave the remaining BW for Data . The traffic between the locations is passed through the tunnel using the static routes .
View 2 Replies
View Related
Jul 20, 2011
I have this problem with the Polycom Video Conferencing (HDX 7000) While we can initiate a video call to other locations, we can not receive a video call from other locations. Whenever there is a incoming call, the polycom is ringing fine. but once we answer the call, the call will be disconnected. Our access rules are listed below, 203.125.99.99 is our public IP for example.
View 1 Replies
View Related
Nov 7, 2011
We have just acquired a cisco profile 42 video conferencing equipment and am required to open ports for SIP and H232, any pointers on hw that can be acquired i have a cisco ASA 5510, Some one told me to open port 16384 but i need pointers on how to do it becuase I already set an access list to any.
the config
Internet -> ASA 5510 -> Switch -> Profile 42 and other devices
View 5 Replies
View Related
Nov 26, 2012
i have Huawei 8066 video conference Terminal, and i want to have a video conference point to point using the internet, so how to set the connection ?
View 3 Replies
View Related
Dec 26, 2010
Running FWSM Firewall Version 3.1(4)
The problem is that calls originating from the outside of the firewall to the inside will ring but you cannot answer. The internal video conference server is a Polycom HDX 7000. There are ANY/ANY rules to/from this server and the default application inspection policy is set for h323/ras/h225 as follows:
[code]...
View 2 Replies
View Related
Apr 28, 2013
I am using Cisco AnyConnect VPN Client v2.3.0254 and ever since i upgraded my laptop from the Lenovo T420 to the Lenovo T430 the time it takes to connect via VPN has increased drastically. Connecting via VPN on my Lenovo T420 would take as little as 5 seconds to authenticate and connect while connecting with my T430 is now taking at minimum of 5 minutes, sometimes upwards of 15 minutes only to report back an error!
The screen the AnyConnect VPN Client seems to hang on is "Establishing VPN - Initiating Connection..."
The server is enforcing that McAffee is installed and up to date, however i have already made sure that my McAffee install is valid and up to date.
I have already taken these steps to try to correct the issue: Re installed Cisco AnyConnect VPN ClientRe installed & updated virus definitions for McAffeeRan CheckDisk on my primary OS partitionRan RAM validation utility to verify no bad sectors I have attached a screenshot of the error log from AnyConnect as well as the log html file.
View 2 Replies
View Related
Jan 30, 2013
About 2 years ago I bought my first laptop and the person I was with recommended my purchasing of a Belkin router. I bought the router, it worked great until this past summer when suddenly whenever somebody called my house phone, my connection was dropped. I was angry cause naturally I have those family members that want to call and talk on the phone with my mother for hours. Eventually I figured out I could work about the problem by hooking the Ethernet cord on my Westel directly to my laptop. Its a temporary fix though in my opinion because this requires me having to sit on the floor against my bed room door and this isn't comfortable, not to mention its also confining, I miss walking around the house with my laptop. Anyway this past weekend I decided to try buying a new Belking N300. This however didn't solve the problem, I still got my signal dropped whenever somebody called the house.
View 14 Replies
View Related
Dec 6, 2011
I have two cisco routers (Cisco 2911 and 871) that I'm trying to establish a L2L VPN with. Each have a VPN configured to our cooperate office that is up and working. I'm now trying to establish a site to site VPN from both remote offices. I have my crypto maps, NoNats, and interesting traffic set up however, I do not even see phase one come up.
I've attached each config. Most of my site to site experience is on PIX's and ASA so I'm curious if there is something else I need to do on my outside interface to allow multiple VPN's?
View 2 Replies
View Related
Jun 20, 2012
We are about to install a cisco 2911 router to replace a linux based router.
The Cisco will have 5 gig ports, 4 ports connected to DSL modems each modem connected to a different ISP, and the last port connected to a Cisco LAN switch.
802.1q will be used on the internal router port to split the LAN segments up into VLAN's as the building contains lots of different businesses.
Each customer in the building has there own servers and set of public IP addresses assigned e.g
Customer A - ISP 1 uses 81.34.65.78 NAT'd to 10.0.0.1 Vlan 5 port 25 (SMTP)
Customer B - ISP 2 uses 217.23.67.87 NAT'd to 192.168.1.1 Vlan 6 port 25 (SMTP)
and so on
The outbound traffic also needs to go out of the correct DSL line which ever has been assigned to that customer.
Am i right in thinking the only way to do this will be to use "Route Maps" ??
(IP addresses above are made up, or at least not ours)
View 17 Replies
View Related
Jul 25, 2012
we have several Dell machines using W7 and all of them are exhibiting the problem of not connecting to some wifi sources. The wifi appears to connect but no internet connection takes place.
View 1 Replies
View Related
Feb 27, 2011
We have a new 2911 that needs to be configured, unfortunately it's at a remote site. I had installed the following config: [code]
Now, I do get a dhcp ip on the G0/0 interface and I can ping it from my remote network and the local router as well as the local lan. The hands and eye guy is able to telnet from the local lan but I am unable to telnet from either my remote lan or the local router.The only error I receive is "connection refused by remote host". All lines are clear so I have no conflicts with multiple telnet sessions.
View 8 Replies
View Related
Nov 7, 2011
I am learning the 2911 router. Is there a way to set a physical single RJ45 port to handle multiple WAN IPs? Or do I need to buy a port expansion module.
View 12 Replies
View Related
Sep 17, 2011
I am wondering if xconnect L2TPV3 feature could be done on multiple SVI interfaces on 871 router and 2911 router with built in 8 port switch?Like I need to extend two ethernet interfaces and can I use two SVIs on router built-in switch module on each side?
View 2 Replies
View Related
Feb 12, 2012
I have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies
View Related
Feb 17, 2013
We need to give differentiated internet access to three VLANs. Each one of this VLANs is used for totally different purposes, so traffic between the VLANs is not allowed. Each VLAN has its own internet access provided for the data center using one fast ethernet connection.
We're thinking about using cisco 2911 for Internet access, VPN and firewall. I suppose that best option for VLANs is using Catalyst 2960S or a swithing module for the 2911, but these two options are too expensive for us. We're thinking about using swtiches from the SB series (maybe a SG-200).
We're totaly newbies to VLANs so we have many doubts. This are our questions:
1) The 2911 has three on board ethernet interfaces; we have three VLANs and three internet connections, so we need to use HWICs to get three more ethernet ports. That's right?
2) We need three HWICs or there is some kind of HWIC with more that one ethernet interface?
3) The routing solution is to assign static routes in the 2911 for each interface connected to a VLAN through a 2911's interface connected to internet?
4) Simply connecting three different router interfaces with three different switch ports, each one of them assigned to one of the three different VLAN, are we going to get internet access for all devices in those VLANs? or do we need to configure something else like trunking, VSIs...?
5) Can we achieve our goals using the SG-200 switch?
6) We have the chance to use older routers, is this possible? We're specially interested in knowing if a 1841 or a 2801 router could be used for this setup.
7) This is not a production environment so we can use refurbished equipment.
View 4 Replies
View Related
Nov 16, 2012
I find Youtube, Vimeo and similar sites stutter a lot during streaming. I've run speed tests on my cable connection and am getting well over 50Mps.Is this the site's server problem, my Virgin cable provider or my PC please? [code]
View 6 Replies
View Related
Jan 24, 2013
[code] Site-to-site VPNs in place between Site A and Site B and between each site to the DC. Site A and Site B have Cisco 2911 routers, there are ASA’s at the DC. The existing Site-to-site VPNs carry data and voice traffic between the sites (though voice and data is on separate VLANs in separate subnets)
ISP1 currently used for the existing circuits at Sites A and B but we have experienced issues with them recently which has disrupted service. So new circuits are to be installed at each site with ISP2. (See basic diagram attached which shows current set-up with intention to get new circuits via ISP2 installed)
We have 3 ports on our Cisco 2911 routers with 2 ports already in use for the existing connections (1 for the LAN and 1 for the WAN connection to ISP1) Can we simply use the 3rd port for the connection to ISP2 or would it be far more advisable to use a 2nd router (for redundancy, etc)
Would it be feasible to have a set-up where we have e.g. voice traffic go over a site-to-site VPN via ISP1 and data traffic go via site-to-site VPN via ISP2 but each can take over from the other in the event of a failure?
View 5 Replies
View Related
May 4, 2011
I am using ASA 5510 and I have a specific problem with Http Connection to receive a video Flow ( RSTP protocol ) in the LAN. Some Pc users (192.168.1.133,in the log) with ASA Lan Interface as gateway can ping the Camera but don't receveive the video flow.Some Pc users (192.168.1.116,in the log) using another gateway can ping and receive the video flow. I used Whireshark to capture traffic between camera and Pc using the 2 gateway. I joined Logs with this message.It seems to be a problem of TCP segments on the ASA, I try to changed some TCP options but it's still the same:- Disable Force Maximum Segment Size- Enable Force TCP Connection to Linger in TIME_WAIT State for at Least 15 Second.
View 7 Replies
View Related
Apr 14, 2013
I've been having trouble recently with the buffer speeds on youtube.. i use google chrome, and i have a custom built pc with high end specsmy internet connection ranges from 50mb/s to 90mb/s as shown below(i pay for 100mb/s with virgin media, but the speed varies a lot throughout the day)I run a wired connection and have tested different cables, with no success.If i clear catche/browser history ECT i get a short-term buffer speed boost, but after a few minutes the buffering becomes super slow again.people in the same house are having there videos load instantly, with computer no were near as good hardware wise as mine and using a wireless connection.i've tried a few things.. none of witch have worked.. with my speeds i should be able to watch videos in HD and have them buffer instantly.. at this point i cant even watch them in 320p.
View 19 Replies
View Related
Aug 27, 2011
I can't seem to skype or video chat of any sort (ie: aim video chat, facebook video chat, etc.) on my computer. Whenever I start skype or try to start a video chat on aim/facebook, it fails and my internet disconnects for everyone. I don't know what could be wrong. Using the same wireless internet, my friends are able to video chat on their macbooks. It seems like my computer is the only one that can't video chat. Video chatting works when I use a sprint internet card. I have a sony vaio laptop running on windows 7. Our router in our apartment at school is a D-link wireless N? In addition to this problem, my internet loves to disconnect randomly too...this problem also persists at home with my Cisco Linksys router (model WRT160N V3) and Speedstream 5100 modem.
View 5 Replies
View Related
Jul 13, 2012
I have been having a problem with my 4400n dropping connection when streaming video / audio.It is connected half duplex to a cat2950 and the media server is mediatomb on a linux box the client is a ps3 presently.
View 3 Replies
View Related
Jan 10, 2012
I am having wireless connection/internet issues that are irritating me to the core!!! I have called tech support 4 times now, and I still can't get everything to play nice...I have the 655 set up as a wireless router to a Windows 7 laptop, one iPad, two iTouches, and one N3DS. I can't find a setting that will work with all devices. Here are the senarios...
1) Settings: Wireless enabled, 802.11n only, Auto Scan off-channel set to 1, Best Transmission rate, Channel Width Auto 20/40, Visible, Auto WPA Mode with AES Cipher and a pre-share key. This yields fantastic results with my laptop, it can stream video for entire episodes, and I have no problems with loading webpages in either IE or Firefox. However, it does not support the kids iTouches or N3DS.
2) Changed the above to mixed 802.11n/g AND ALSO tried 802.11 only: iTouches work and can connect to the internet, but laptop doesn't like it. I get "Problem loading webpage" every other time I access and website, and streaming stop every 5-6 minutes. Bars indicate wireless signal is strong, but intermittently get that yellow triangle.
View 11 Replies
View Related
Jan 9, 2011
having some issues with a configuration using a Dialer interface. The interface comes up and the VPN tunnel comes up, but cannot access any network resources or the Internet.
The things that concern me most are my access lists as I have the static IP address that we are assigned via PPPOE - the IP never changes, but not sure if I can define it in the ACL or if I should be using an ANY tag.
Note: I've changed some IPs and username for security reasons.
!version 15.0service tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname C2911-OTO01!boot-start-
[Code].....
View 1 Replies
View Related
Mar 6, 2012
what will be the work around on this configuration.currently we have a Lease Line connection on serial interfaceISP <=SERIAL=>Router 2911<=ACCESS MODE=>Firewall(DATA DHCP SERVER located here, policy implemented here)<=TRUNK MODE=>CORE Switch(VLAN Assignment is here)<=TRUNK MODE=>ACCESS Switch(DATA and VOICE passess thru each ports)i am thinking to create a DHCP pool on the router to where my firewall should point to and from the DHCP pool it will point the internal network going to public network.
View 2 Replies
View Related
Jan 24, 2012
I need to permit the connection from outside to inside in a 2911 Cisco router, only from an Public IP Address (suppose 1.1.1.1) to some local private IPs.
I have one question:
Using the command:
ip nat inside source static tcp <local ip> <port> <global ip> <port>
The "global IP" can be the Public IP from where the connection starts (in this case 1.1.1.1)? or it must be the Public IP assigned the the Router interface connected to the Public Network.
View 8 Replies
View Related
Dec 25, 2011
I am having one router CISCO2911/K9 (Cisco 2911 w/3 GE,4 EHWIC,2 DSP,1 SM,256MB CF,512MB DRAM,IPB). But now my management asking me to upgrade this router as CISCO2911-SEC/K9.
What will be the BOM for this up gradation.
View 2 Replies
View Related
Feb 9, 2011
We have 2 h323 IP phones (non cisco) that connect to an IP PBX via a VPN connection using PIX 5505's at each end. The VPN seems to work fine and the phones can be used normally with good call quality, display, status...The problem is that when talking on the phones for any extended period of time, the phone reboots, drops the call and then restarts automatically. This problem usually happens on phone calls lasting 20 minutes or more but has happened on calls as short as 15 minutes. I have also made calls which have gone 45 minutes before the reboot. I have removed everything from the network hosting the remote IP phones except for a single phone and the problem still occurs. It is not a POE Issue as the phones can use a power brick and it still happens. The same phones work perfectly on-site when not using the VPN.Someone has mentioned that I should adjust the UDP Timout Timers of the VPN. I don't see any UDP timers and am at a complete loss on what is causing this. The data traffic does not seem to get dropped when connected accross the VPN for hours at a time.
View 1 Replies
View Related
Aug 31, 2011
my hp 5102 takes long to start.
View 1 Replies
View Related
