Dell :: XPS 17 L702x Takes More Than Usual To Boot
Nov 26, 2012I have notice that my XPS 17 L702x takes more than usual to boot than before.
View 5 RepliesI have notice that my XPS 17 L702x takes more than usual to boot than before.
View 5 RepliesMy wireless connection takes about 5 minutes to actually work once I reboot my windows computer. Once I start it, the wireless indicator in the bottom right corner of the screen shows that it is loading, but then freezes and doesn't let me use most applications on my computer. Then all of a sudden it will so a wireless signal and connection and everything works just fine. On the other hand, when I use the function key on my keyboard that turns off the wireless card before I restart my computer, the wireless stays off when I reboot. Then I turn it back on using the function keys and my wireless will connect automatically. Why is it that the wireless card/connection won't start up quickly if I just leave it on like people always do normally? Why is it that I have to toggle it on/off all the time for it to work connect quickly?
View 3 Replies View RelatedI have WAG-120N ADSL Modem+Router which I am using for the last two years. Recently It has started taking about 2-3 minutes to show any sign of life after it is powered on. When powered ON no light comes up until 2-3 minutes. Then Internet light goes red for about 2 seconds then power light goes on followed by all lights then it starts booting normally i.e. Power light stars blinking, WiFi light blinking, power light stabilizes, DSL light starts blinking, WiFi light stabilizes followed by DSL & Internet. When ON it works perfectly alright until switched off.
View 7 Replies View RelatedI have a Cisco Aironet 1200 Series Access Point. It takes long time to boot up.
After showing the warning banner message it takes long time before asking for username.
The sh version is given below.
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA4, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Tue 05-Sep-06 14:15
[Code].....
I have a dell xps 17 l702x and I live in Halls of residence (dorm) . Suddenly this morning my laptop doesn't connect to Internet (wifi or ethernet) . When I try to connect my friend's laptop to the same cable . It works . I am using avg 2013 .
View 2 Replies View Relatedsome days ago a technical Dell replace on my XPS17 L702X the fan because more often, while I was working, fan get started (noise, decrease in performance, and so on ...). After some hours my laptop dies, I found it tourned off and it didn't start again. So, afert two days, another technical Dell changed XPS17 's motherboard and the power connector. The same day I worked with my notebook without any problemes, but at the end of my workday I shut down the system (Windows server 2008) and It restart automatically. I tried again more than once, but at the end my laptop restart automatically again (I have two partitions: Win 7 and Win 2008 server Both OS has the same issue: automatic reboot afert shut down). This morning I turned on my laptop and immediatelty I shut it down and It dind't restar, during the day while I was working, sometimes I turned it off and all seems ok, but this evening (after a workday and after backup) it restarted automatically again after shut down !
View 1 Replies View RelatedI recently bought a Dell XPS L702X with Intel Centrino N 1030 Wireless and BT 3.0 HS card/driver.How to connect my Android mobile phone over BT to answer calls on laptop?I have tried everything: new BT drivers, Broadcomm drivers won't find my BT device (it was turned on), tried installing Bluesoleil w/o success.i only have 3 posibilities: sync phonebook, play audio on laptop from mobile phone and transfer files.
View 6 Replies View RelatedI upgraded to windows 8 from the windows7 a couple days ago and everything seems to be working fine except my desktop. All of the metro style apps (including IE 10) connect to the internet but for some reaon I cannot connect to the internet on my desktop at all. Anything app or my browser on my desktop cannot find any internet to connect to. I have XPS L702x
1- Real player Plus 16 no connection
2- Roxio NXT no connection
3- ITunes no connection
Just recently bought a dell xps 17 L702x, and decided to reinstall windows 7 as it came with all the nonsense factory software installed.
The problem is I can't find a wireless network driver, the drivers CD I received with the laptop is useless and the official drivers on the dell website do not work either, I do not know which network card I have, so I downloaded a software which would tell me all the hardware in the laptop but it ends up telling me I do not have a network card, but I definitely do have one because the wireless was working before the reinstallation of windows. So now I'm stuck with a laptop with no wireless, having to use an ethernet cable.
I have a annoying problem with my Dell L702x i5-2430M @ 2.4 and Intel Centrino Advanced-N 6230. When I reach high downloading speeds (4-9mb/s) and have music on ( laptop speakers, using media player classic build version 1.5.2.3456) I hear some intense crackling sound from the speakers, but only when the music is on, whenever I pause the music the crackling stops. If I stop my downloads then the crackling sound disappears.
View 4 Replies View RelatedI have a Dell Inspiron N5110, service tag
<ADMIN NOTE: Service tag removed as per privacy policy>
This never used to happen but has been occurring for about 5-6 months without an end in sight. The problem is that it takes ages to connect to a network and that networks are not joined automatically. Basically, whenever I open my laptop from sleep, I will see the little blue rotating symbol in the bottom right hand of the screen and it stays there for 2-3 minutes (usually) before it connects. Windows usually pops up an icon which says 'it is taking longer than usual to connect to the network' and it seems to often successfully connect when the connection attempt times out.
Steps I have taken to fix the issue:
- Update the network driver (it is up to date).- Never allow the system to turn off the wireless network adapter (via device manager).- Check that the network has 'join automatically' ticked in the settings.
I have an Inspiron E1705 and my wireless card/adapter takes about 3 minutes to load each log in. I called Dell, and they couldn't find out what was wrong. We tried things from internet settings, to shutting off all the start ups in MS Config. I've had this problem for a very long time. Windows will start up, and it seems like there is a 3 minute wait period of my computer doing nothing, and then finally, the wireless loads in my System Tray.
View 14 Replies View RelatedI have 2 laptop one is dell latitude e5430. Its wireless is doing problem... Whenever i connected my wireless i takes too much in opening website.... while on other one it is fine.... ON BROWSER ITS WAITING FOR GOOGLE.COM
View 1 Replies View RelatedI have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies View RelatedI am trying to do a PXE Boot with a M50 Precision Workstation. I have flashed my BIOS to A12. When I boot up, I get PC Boot Agent 4.31 and PXE 2.41. It starts to do the DHCP, however it errors out with the message:
PXE-E51: No DHCP or proxy DHCP offers were received.
I wonder if is posible to have (again) the usual redirect after log in. On DIR-635, DIR-855 after log in you get redirect to the STATUS if WAN connection si functional, else you get SETUP. Now, on DIR-825 even if WAN is active/functional the redirect is to SETUP page.
View 7 Replies View RelatedI recently installed a Dell 5324 switch as my main switch and it's my first time using a managed switch at home. One thing I've seen as an issue in a corporate environment, and now here, is that managed switches tend to take a bit longer for a port to be active. Ex: a PC is turned off, I turn it on but if the PC boots up very fast the port may not be ready. All mounts fail. This is the issue I am facing with my HTPC. It runs Linux and has a SSD, and it has no UEFI bios to slow it down (which is good, I hate UEFI for that) so it's up and running within 5-10 seconds of pushing the power button. The network mappings fail because the port is not ready by the time it gets to the script that mounts everything.
View 8 Replies View RelatedI have a Dell laptop running Windows 7. The problem is that every single time I try to connect to any wireless network, I get a message that says "Connecting to the network is taking longer than usual."The network almost always connects eventually (about 2 minutes), and once connected there doesn't seem to be any other problem.This has been going on for about 2.5 months. It began shortly after I restored the laptop to factory default.
View 11 Replies View RelatedI'm looking for troubleshooting LMS 3.2.1 and the ping/ICMP traffic it transmits.A lot of my devices are receiving a lot more pings from LMS than I would have anticipated.I don't run PING sweeps in Device Discovery or CM-UT. I've even disabled DFM polling in a hope to trace the source of these PINGs. Any list of which modules use PINGs so I can turn them off and track down the offender.I really only want to manage the known devices I already have via SNMP alone. I don't require LMS to be PINGing for discovery or reachability purposes.
View 4 Replies View RelatedAny way to access the usual command line interface instead of using the GUI or Telnet/SSH interfaces on the Cisco Small Business SFE2010P switch? Note that the console port is not working at the moment...
View 4 Replies View RelatedMy internet speed is 3.0 Mbps and im not sure how to convert that into the usual download speeds of the kiloBytes per second?
View 1 Replies View RelatedI have a WRT160N that I used just once after purchase (my ISP gave me a wireless router). I could not remember the PW, so I reset. (The computer saw the old router name but I had no PW)When I run the software (CD that came with the product says 150N), it get to "configuring computer" and stops there.I tried downloading the software, but when I try to run it says "Application requested runtime to terminate in an usual way."When I go to the 192. URl and try to login using a bank user name and 'admin," it jsut keep bringing up the password box.
View 2 Replies View Relatedwhat is the difference between Cisco Nexus switches and the usual catalyst 3750 switches.I do understand the operating system in both these are different.
When will we suggest using Cisco nexus instead of usual Cisco switches? Also what interface does Cisco nexus like 5548 come with , is it both copper and fiber?
my hp 5102 takes long to start.
View 1 Replies View RelatedI did a speed test and everything seemed good. Dl speeds at 16mb/s and upload speeds at .99 mb/s. However when I go to websites and load pictures it takes like a minute to load. Why is that?y speed seems fine when I test it, but slow to load stuff.
View 1 Replies View RelatedEvery time i boot up my laptop the little blue ring in the lower right corner just completely stops and it keeps me from opening anything and i have to wait at least 2 to 3 minutes to start up?
View 3 Replies View RelatedAfter startup, the computer takes about 15 seconds for it to identify the LAN.
View 1 Replies View RelatedI am using using 2 broadband with tp-link dual wan router 10 pc using the broadband.does any one know about the router who controls bandwith there is option available in Tp-Link Dual wan router but its not working...is there any router which automatically takes bandwith and allow as per my details.
View 1 Replies View Relatedi need to access my routers settings. i have my default gateway 192.168.21.254 . i enter that into my web browser, and it takes me to a user agreement page. the whole purpose of this is to set my NAT type to open on my xbox 360.
View 3 Replies View RelatedI ve recognized some strange issue with LMS 4.2 , when the router becomes down or unreachable , the LMS doesn't send any event as Faultview,also when the router comes back online the LMS takes 1 hour to show its state as reachable.
View 3 Replies View RelatedHow to fix our LMS 4.0 high CPU issues?. It takes lots of resources and also some time stop responding.
View 7 Replies View RelatedWe are using a service module with 4.1(1) that takes more more time to compile ACL.So we need to wait more time to permit and capture traffic.
View 1 Replies View RelatedI am using Cisco AnyConnect VPN Client v2.3.0254 and ever since i upgraded my laptop from the Lenovo T420 to the Lenovo T430 the time it takes to connect via VPN has increased drastically. Connecting via VPN on my Lenovo T420 would take as little as 5 seconds to authenticate and connect while connecting with my T430 is now taking at minimum of 5 minutes, sometimes upwards of 15 minutes only to report back an error!
The screen the AnyConnect VPN Client seems to hang on is "Establishing VPN - Initiating Connection..."
The server is enforcing that McAffee is installed and up to date, however i have already made sure that my McAffee install is valid and up to date.
I have already taken these steps to try to correct the issue: Re installed Cisco AnyConnect VPN ClientRe installed & updated virus definitions for McAffeeRan CheckDisk on my primary OS partitionRan RAM validation utility to verify no bad sectors I have attached a screenshot of the error log from AnyConnect as well as the log html file.