I wonder if is posible to have (again) the usual redirect after log in. On DIR-635, DIR-855 after log in you get redirect to the STATUS if WAN connection si functional, else you get SETUP. Now, on DIR-825 even if WAN is active/functional the redirect is to SETUP page.
View 7 RepliesI have a Dell laptop running Windows 7. The problem is that every single time I try to connect to any wireless network, I get a message that says "Connecting to the network is taking longer than usual."The network almost always connects eventually (about 2 minutes), and once connected there doesn't seem to be any other problem.This has been going on for about 2.5 months. It began shortly after I restored the laptop to factory default.
View 11 Replies View RelatedI'm looking for troubleshooting LMS 3.2.1 and the ping/ICMP traffic it transmits.A lot of my devices are receiving a lot more pings from LMS than I would have anticipated.I don't run PING sweeps in Device Discovery or CM-UT. I've even disabled DFM polling in a hope to trace the source of these PINGs. Any list of which modules use PINGs so I can turn them off and track down the offender.I really only want to manage the known devices I already have via SNMP alone. I don't require LMS to be PINGing for discovery or reachability purposes.
View 4 Replies View RelatedAny way to access the usual command line interface instead of using the GUI or Telnet/SSH interfaces on the Cisco Small Business SFE2010P switch? Note that the console port is not working at the moment...
View 4 Replies View RelatedI have notice that my XPS 17 L702x takes more than usual to boot than before.
View 5 Replies View RelatedMy internet speed is 3.0 Mbps and im not sure how to convert that into the usual download speeds of the kiloBytes per second?
View 1 Replies View RelatedI have a WRT160N that I used just once after purchase (my ISP gave me a wireless router). I could not remember the PW, so I reset. (The computer saw the old router name but I had no PW)When I run the software (CD that came with the product says 150N), it get to "configuring computer" and stops there.I tried downloading the software, but when I try to run it says "Application requested runtime to terminate in an usual way."When I go to the 192. URl and try to login using a bank user name and 'admin," it jsut keep bringing up the password box.
View 2 Replies View Relatedwhat is the difference between Cisco Nexus switches and the usual catalyst 3750 switches.I do understand the operating system in both these are different.
When will we suggest using Cisco nexus instead of usual Cisco switches? Also what interface does Cisco nexus like 5548 come with , is it both copper and fiber?
ip redirect or forwarding. I have a web server with public IP as B.B.B.B, and I have another server with public IP as A.A.A.A.. My web site contents are with B.B.B.B, but I do not want to expose IP B.B.B.B. Users can visit my web site using A.A.A.A, and when they visit A.A.A.A, I would like to have A.A.A.A redirected to B.B.B.B behind scene. Both IP's are public, and stay different locations remotely.How to redirect IP A to B, so I can hide B?The machine with IP A.A.A.A is windows 2003 server standard.
View 5 Replies View RelatedHow do I redirect the visits to a specific homepage (web site) to access a "sub" page in the same domain? Is it possible to use the Hosts file to do this? I want redirect visits to [URL]
View 5 Replies View RelatedWhat the most cost and time effective way to have an ip request return with another ip address from outside the WAN of the router.Specifically want to have an application request for example 192.168.1.121 and have 173.194.43.41 respond and communicate with the application instead. To make it a bit more interesting I'd like actually to set a table or config file to point to a domain name (url) which gets resolved as an ip address. (Port independent)To get a better understanding:one example might be typing in 192.168.1.121 in a browser and googles search engine comes up on the browser.another example might be typing in 192.168.1.121 in an ftp client and it hooks to an ftp server on the other side of the world which resolves to [URL]. I was looking at openwrt and tomato a little but I don't think I have such a complete grasp on how to do it in general. Being that it seems they are 2 different layers of the network model, I was told it can't be done but I don't know if I can believe that yet. Either by third party software or reprogramming the router or adding another device to the network.
View 3 Replies View RelatedI currently have CenturyLink (Qwest) DSL (12Mbps/896Kbps) and Comcast Cable (12Mbps/2Mbps) going into a Cisco RV08. I redirected all DNS traffic to the DSL line as an experiment with no decrease in web browsing speed. e are rural and speeds fluctuate considerably during the day. It seems like it's more of a response issue than a bandwidth issue. I would like to order a 2Mbps dedicated line from Comcast to use for DNS and VOIP traffic only, the DNS resolution times should be faster on that connection. There would be several tenants in this building using it for that purpose. The secondary purpose of this line would be for backup internet connectivity
View 1 Replies View RelatedIt's been awhile since work has thrown me a curve ball so I was about due. We've got a client that wants us to log into their secure portal, this is normally not a issue. The link they sent us to their 'portal' apparently takes us to the wrong page. Their solution to this is for us to create a DNS entry to resolve that URL to a specific IP address. We don't currently have a DNS server setup in house so I assumed this would be something done on the Sonicwall.
I asked them why I couldn't just go to the IP address instead of the URL anyway and they said it wouldn't work. Is this something that I can maybe create a NAT Policy for and have it redirect traffic to there? I know the SonicWall has a DNS tab but I've never touched it and I'm not sure what I would need to put in there anyway.
I have a PIX 515 that i need to use as an ip redirector.For example if users try to access 80.80.80.80 ,they need to be redirected to 90.90.90.90 show ver,
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 000b.5fad.0c99, irq 10
1: Ext: Ethernet1 : address is 000b.5fad.0c9a, irq 11
[code]....
This platform has an Unrestricted (UR) license.
So stupid old copy machine in office only recognizes an IP address to send scans to.Detail:We've had an old slow XP box hooked up on the network as that IP address and it works fine... scan on copy machine and it sends it to a folder on that desktop. Everyone gets scans from that folder from a mapped drive on their esire:Want to nix the XP box and put a share folder on my WinServer2003 box (which I already set up and set permissions on).n I set on my network (and how) for IP (192.168.1.199) to go to that share folder now instead of a PC with that IP#?
View 2 Replies View RelatedIs it possible in Cisco 800 Router to redirect a website request coming from a user to an IP address?
View 3 Replies View RelatedYou have a Cisco ASA 5520 where clients connect using Cisco Anyconnect SSL VPN, say the URL is connect.whatever.org. You would like for when a user enters either [URL] or just connect.whatever.org into their web browser that it automatically puts the required url...
View 1 Replies View RelatedI want to make it so if a user tries to use a different DNS server the request will be redirected to the one they should be using.I thought this might work but the ASA doesn't do PB routing
ip access-list extended transparent_dns
permit udp any any eq 53
route-map redirect_dns permit 10
match ip address transparent_dns
set ip next-hop ip.of.your.server
route-map redirect_dns permit 20
[code]....
The DNS server is windows 2003?Would policy based NAT or WCCP work for this? If so how would I go about it?
I am not an expert at routing but was wondering what the most cost and time effective way to have an ip request return with another ip address from outside the WAN of the router. Specifically want to have an application request for example 192.168.1.121 and have 173.194.43.41 respond and communicate with the application instead. To make it a bit more interesting I'd like actually to set a table or config file to point to a domain name (url) which gets resolved as an ip address. (Port independent) To get a better understanding: one example might be typing in 192.168.1.121 in a browser and googles search engine comes up on the browser.
another example might be typing in 192.168.1.121 in an ftp client and it hooks to an ftp server on the other side of the world which resolves to ftp.this-is-a-test.com.Make sense? I was looking at openwrt and tomato a little but I don't think I have such a complete grasp on how to do it in general. Being that it seems they are 2 different layers of the network model, I was told it can't be done but I don't know if I can believe that yet. Either by third party software orreprogramming the router or adding another device to the network, I have a feeling that it seems like such a simple redirection that it can be done somehow
How to Configure Router to redirect all internal computers to redirect to a particular website..
View 1 Replies View RelatedI'm running several game and file servers via a dynamic IP, which I unfortunately cannot change to a static connection for several reasons. I've solved this by using No-IP, which is a Dynamic IP resolution service. This solved the first part of my problem - I can give people IP's for their websites, such as myfreemusic.sytes.net and so forth, but they all HAVE to append their ports to the url - i.e.
site1.sytes.net:90
site2.sytes.net:91
My main problem right now is the game servers - I'm hosting games that default host to 25565, and though I can change the ports the server hosts from, I must give those who want to connect the ports at the end of their urls, i.e.
server1.sytes.net:25566
server2.sytes.net:25567
I know DNS is essentially agnostic when it comes to ports, so no solution there. And I don't think the game (Minecraft vis-a-vis bukkit) supports SRV records, and even if they did, I'd have no idea how to configure them. How can I resolve static urls redirecting to a dynamic IP by pointing them to ports?
To simplify the question -
How can I make server1.sytes.net resolve to port 25566, and server2.sytes.net resolve to port 25567 when the default port is set to 25565?
I think my E4200v2(Firmware Version: 2.0.37 ) should redirect to CCC as this link, is the CCC just could be used in US?
View 4 Replies View RelatedNot sure if I am using the correct terminology in my title. Basically, I want to use a service like unblock-us.com or tunlr.net so I can access US Netflix content here in Canada.
These 2 services give you ip addresses to enter for your primary and secondary dns servers.
I would like to make it so only traffic going to netlix makes use of the unblock-us.com dns servers. I know this can be done by installing dd-wrt and then using dnsmasq, but I would rather not have to go that route if can be done with native firmware.
If cannot be done 'out of the box' any other way to do without having to change firmwares?
Is it possible to redirect all web traffic to a Symantec web filtering address on a particular listening port. I had a look at the Srp527w Router and can't find where this could be done.
View 1 Replies View RelatedI have a problem configuring URL redirect on ACE 30 (Version A4(1.0)).When a user enters IP address or a name of a service [URL], the ACE module should redirect him to the page [URL]. Here is my non-working config:
access-list OUTSIDE line 8 extended permit tcp any any eq https access-list OUTSIDE line 16 extended permit tcp any any eq www access-list OUTSIDE line 24 extended permit icmp any any
probe http Test_HTTP_1 port 80 interval 60 passdetect interval 30 passdetect count 2 request method head url /index.html expect status 200 200 open 1
rserver redirect URL_Redirect_01 webhost-redirection [URL] 302 inservicerserver host S1 ip address 10.0.0.2
inservicerserver host S2 ip address 10.0.0.3
[code]....
it works, ACE load balances to rservers. Of course, user must enter full url.With redirection configured, user recieves HTTP url redirect message with correct address [URL], but his browser does not display the page. Even directly entered full url does not display it while redirection is configured.Alternatively, does ACE30 already support url rewrite?
We have a WLC 2504, since a few months, it was working fine, we have a guest Wlan configure with web authentication and the DHCP scope for this in the WLC. The problem today is that its no redirecting the web browser to 1.1.1.1, we try it with 3 laptops and they recieve a correct IP from the DHCP but still can not get redirect to the web authentication portal. Have the default configuration Internal (Default).
In laptops we check the firewall, dont have a proxy activate and have google DNS.. 4.2.2.2 8.8.8.8. In fact this laptops connected to this ssid before.
I have a application where I have to redirect a specific URL to another. The point is that the primary URL, have some information that I want to preserv after redirection, for example: url...
The default CSS11501 behavior is to redirect the primary URL to http://xyz.com. Just that.
i have ACE 4710 appliance that terminate SSL and the connection to the servers is http.
The ACE (one Armed) is load balancing between two web servers and i am using stickness in order to take the connection on the same server based on cookie.I can access the website either by http or https., where on the web page there is a login credential to access using username and password.
When i access the website using https everything works fine and i can login to my account in https mode.When i access the website through http and login to my account the URL is redirected to https...normal because i am using action-list to rewrite the http into https. But when i exit the browser and access the website again using http it is not redirected to https(although i see that i am still login into my account i can see all the inforamtion in my account).
The customer wants the connection to be https even when i exit the browser and access the website again (within short time before the cookie exipres)
I upgraded the firmware on my wap121 and the URL redirect option is now gone. The docs all talk about using Captive portal but that is only on a wap321. How can I get the redirect back so customers who connect to my network see the site for our bar before they go on the internet?
I upgraded from the 1.0.0.3 to the latest (1.0.2.3)
We have W2K3 domain with Catalyst 4507 routers.Client (laptop, tablet etc) needs to redirect web traffic (port 80) to a proxy server that listens on port 8080.
Before you ask, this cannot be done using a PAC file distributed via Group Policy or the like because these devices are not controlled by us. These devices are client owned and could be non-Microsoft OS and/or non-IE browser. The theory is to have a WiFi network where clients can bring whatever they like - iPad, Android, Windows, whatever it may be but we do not control them and therefore cannot send a PAC file to it. In the case on Android it does not have a proxy setting even if we could force something.
I've looked at Policy Based Routing which appears to do half the job. I can route a web request that is on port 80 to a new location ie our proxy server. But the problem is that it arrives on the same port 80 when the proxy server only listens on port 8080.
I would like to know whether LMS 4.1 (local server mode) has the ability to relay syslog messages received from devices to an external syslog server? If so, how do I configure such?
From reading the document and going through the LMS 4.1 GUI, it appears that it could receive and forward messages but only between LMS system (ie. multi server mode) as SSL is required.
Redirecting a Domain to a IP:Port I host game servers for friends and strangers alike, but i'd like to make it easier for them all and give them dedicated IPs. Right now I include domain redirecting, but to connect to their server, they have to put in "example.com:xxxxx", x meaning their servers dedicated port. Is there any way that I can redirect a domain directly to "IP:Port"?
View 3 Replies View RelatedOur company uses a commercial copier monitoring package called FMAudit to obtain meter readings from our clients' copiers, and it uses a feed to send the readings back to us. We have used port 90 for this purpose.Due to a recent server crash and emergency reconfiguration of our network, we have moved our FMAudit central server from in-house to a hosted service, with of course a different external IP address.
Without interfering with our other systems, is there a way to redirect JUST PORT 90 to another IP address external to our own? I don't care if it has to happen at the router or server level. We are using Server 2003 and a Cisco 887VAW.