Cisco Wireless :: Wap121 Url Redirect Gone After Upgrade?

Jan 9, 2013

I upgraded the firmware on my wap121 and the URL redirect option is now gone.  The docs all talk about using Captive portal but that is only on a wap321.  How can I get the redirect back so customers who connect to my network see the site for our bar before they go on the internet?
 
I upgraded from the 1.0.0.3 to the latest (1.0.2.3)

View 9 Replies


ADVERTISEMENT

Cisco Wireless :: WAP121 Giving Firmware Upgrade Has Failed

Jan 8, 2013

I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware rootfs.bin.

View 4 Replies View Related

Cisco Wireless :: Wap121 SSID For DHCP & Web Only

Mar 28, 2013

I want to know how to configure ACL to have access to dhcp and web only.My router does not support tag vlan.

View 1 Replies View Related

Cisco Wireless :: Management Model Of WAP121?

May 13, 2013

I'd like to know if WAP121 can be centrally managed by WLC, such as CT5508.

If WAP121 cannot be centrally managed by WLC, is there any way to minimize operation work to manage WAP121?

View 2 Replies View Related

Cisco Wireless :: Cannot Get WAP121 To Work With SG100D-08P Switch

Dec 27, 2012

If I connect my WAP121 directly to my router, it works just fine.  But when I connect it to my SG100D-08P switch I can see it but when I connect, I get "limited connectivity" and it cannot "identify".  The switch is PoE and everything looks to be working fine, but I have tried it both PoE and regular thru the switch; nothing works.  Can't understand why if I connect it cat-cable going into the switch it works fine, but when I coonect it thru the switch, I have problems.  I thought this switch was unmanaged, but something is going on. 

View 4 Replies View Related

Cisco Wireless :: WAP121 Workgroup Bridge Mode

Feb 16, 2013

I have an old computer with dead wifi nc and I thought that bridging it with was121 should work, but can't find anywhere any comprehensive documentation on how to set it up.

View 1 Replies View Related

Cisco Wireless :: WAP121 Host-pad Uses All CPU / Crashes Every 3.5 Days

Oct 8, 2012

We have 4 WAP121s running 1.0.1.10. After a couple of days of operation, they all become unusably slow. The admin web interface takes several minutes to load, and wireless clients timeout before RADIUS authentication can complete. Waiting long enough allows the diag info to be downloaded, which shows hostapd using all of the CPU time available: [code]
 
As a workaround, we used to use a small script to reboot them every night via SSH, but someone at Cisco made a less-than-brilliant decision to remove this advertised feature.

View 1 Replies View Related

Cisco Wireless :: WAP121 - WDS With Globe Surfer 3+ 3G Router?

Dec 18, 2012

Just got several of these Cisco WAP121 AP's and today had a nightmare with one of them.   On one of our areas with no broadband access we have installed the "Globe Surfer 3+ 3G Router" which incorperates its own Wireless AP.
 
I needed to get decent wireless access further down the building, so the idea was to use the WAP121 and setup WDS with the Globesurfer.  No matter what guides I followed I could not get the WAP121 to talk to the Globe Surfer for internet access.
 
using the WAP121 and a Third party router ?OR, is this a case that the WAP121 wont work with a 3rd party router ?

View 4 Replies View Related

Cisco Wireless :: WAP121 Connected To Network Printer (fails)

Feb 24, 2013

Bought multiple WAP121s which are physically connected via CAT5 to the Ethernet NIC of a printer. Printer is in a warehouse with no Ethernet cabling -- but there is a wifi signal provided by  a Cisco wireless router -- which is why we got the WAPs -- so PCs could get their jobs sent to the printer via Wifi > WAP > printer NIC.
 
Problem is the printers only stay visible on for about 15 min or so -- then disappear. Only way to get them visible again is to do a powercycle on the printer (not the WAP121).  Then it stays visible for for another 15 minutes or so -- then disappears.  If a Workstation sends a continues (-t) ping to the printer IP -- the printer will stay online and get print jobs.... but if activity is idle for 10-15 minutes... it disappears (power-save is off on the printer).
 
Firmware on WAP121 is current. 
 
What setting on the WAP could be enable to keep the printers alive?  have been trying to operate in bridge mode...  What is the "best practice" here for connecting a printer to a WIFI via these WAP121s?

View 1 Replies View Related

Cisco Wireless :: WAP121 Doesn't Work Correctly With Firmware 1.0.1.10

Sep 11, 2012

I just upload firmware1.0.1.10 on 2 WAP121. After the update and reboot, I was able to confirm the firmware version in the System Summary menu. The update is uneventful.However, the functions WDS Bridge and WorkGroup Bridge no longer works on two WAP121:

- For WDS Bridge, when I configure a Remote MAC Address with WPA Encryption and then I click on the Save button, nothing happens there. But it works well when I choose without Encryption.

- For WorkGroup Bridge, when I click on the Save button (even without changing the configuration), I have a message "Certificate file uploaded successfully" and another error message in the background: "error occured for query you send path . device.sync ... "
 
1.0.0.3 firmware is not available on your site, it is imposible for me to go back.

View 2 Replies View Related

Cisco Wireless :: WAP121 Doesn't Accept SSIDs With Space In Them

Jun 20, 2012

Although it does accept it in the setup wizard, you cannot change it in the vap list later on, it will throw a popup telling you there's an invalid character.

I'm running firmwarte 1.0.0.3

View 11 Replies View Related

Cisco Wireless :: WAP121 Returns To Factory Defaults On Power Cycle?

Jun 11, 2012

I've just bought a pair of WAP121 for testing and validation. I've set it up properly (user/password, IP, management vlan, NTP, SNMP, 802.1x, etc). So far, so good, everything worked as expected. I've downloaded the configuration to my PC, and also saved it to startup-config. I've powered off the unit, went for a coffee, and powered it back. All my settings were lost.
 
Tried to restore settings from the file downloaded to my PC, but no luck. After reboot, it was factory clean, no trace from settings in the backup file. I've set it up again by hand, power cycled it, and the **** thing reloaded to default settings.
 
Faulty unit, I thought, so I opened the other one I have, and repeated the whole thing, but same results. Test were made using the power adapter supplied but also tried with a catalyst 2960 with PoE.

View 3 Replies View Related

Cisco Wireless :: RV180W / WAP121 / SR2016T - Wireless Network Setup

Jul 25, 2012

I recently purchase my first Cisco products for a network for our church. I have a RV180W router, WAP 121 Access Point and a SR2016T switch for our network, which is just pier-to-pier at this point. We have 5 computers connected with ether net through the switch and all see the Internet and work fine. The wireless connection through the router is working fine with our wireless devices (laptops and i Pads). Where I am having issues is with the AP. It is in different area away from the router being powered through POE instead of the regular power connection.
 
My problem is this: it takes FOREVER to connect to the AP and to the Internet, even when sitting directly under the AP with full signal. Once connected, it appears to allow Internet connection just fine, but getting to that point takes 15-20 minutes sometimes. Also, when I come back the next day, I have NO signal at all, as it seems the AP has "timed out" due to inactivity or something. I have to reboot the AP and the router to get it all back up and running again. I need for the signal to stay up all the time or at least come on when someone connects.
 
So, what am I doing wrong here? I have recognized and authorized the AP through the router config, security is set up fine and I can see it once it comes up. I have the AP set up as a completely different SSID, although I would prefer to have the AP as merely an extension of the router's wireless network if possible.

View 5 Replies View Related

Cisco Wireless :: Redirect To Web Authentication WLC 2504

Apr 4, 2013

We have a WLC 2504, since a few months, it was working fine, we have a guest Wlan configure with web authentication and the DHCP scope for this in the WLC. The problem today is that its no redirecting the web browser to 1.1.1.1, we try it with 3 laptops and they recieve a correct IP from the DHCP but still can not get redirect to the web authentication portal. Have the default configuration Internal (Default).
 
In laptops we check the firewall, dont have a proxy activate and have google DNS.. 4.2.2.2 8.8.8.8. In fact this laptops connected to this ssid before.

View 1 Replies View Related

Cisco Wireless :: WLC 5508 - Redirect Traffic To Web Proxy

Mar 1, 2013

We need to create Guest WLAN on WLC 5508 which will be used for internet access only. My questions are:
 
1. Is it possible to use our external web proxy server to authenticate users?

2. Can we also forward all traffic to the external web proxy to filter the websites that can be accessed (without configuring it on the browser)?

3. Can this be achieved using the L3 webauth?
 
Our topology:
 
WLC -- Switch -- ASA Firewall -- Internet -- External Web Proxy
 
We are using WLC as DHCP server for Guest WLAN with ASA Firewall as the gateway.

View 6 Replies View Related

Cisco Wireless :: WAP321 Captive Portal Redirect

Aug 1, 2012

Another problem with WAP321 access point. I set up the captive portal for guest access. Connexion is going well, I got IP adress, but then, I open my webrowser to authentificate on the captive portal, and I get a nice "404 not found / file not found" page. If I put the IP adress of the access point in my webrowser, I can get the captive portal homepage. Why the redirection is not working automatically

View 16 Replies View Related

Cisco Wireless :: WAP321 URL Redirect / Auto Authenticate

Jan 24, 2013

I want to setup my wap321 to not go to the Captive potal login page ,I want everyone to be authenticated automatically.  I just want them to be redirected to my home page the first time they try and visit any page.i have the CP setup but I dont see any way to not request a user page and just redirect.I am using the latest firmware.

View 2 Replies View Related

Linksys Wireless Router :: Does E4200V2 Redirect To CCC

Jun 29, 2012

I think my E4200v2(Firmware Version: 2.0.37  ) should redirect to CCC as this link, is the CCC just could be used in  US?

View 4 Replies View Related

Linksys Wireless Router :: Can E4200 DNS Redirect?

Jul 12, 2012

Not sure if I am using the correct terminology in my title.  Basically, I want to use a service like unblock-us.com or tunlr.net so I can access US Netflix content here in Canada.
 
These 2 services give you ip addresses to enter for your primary and secondary dns servers.
 
I would like to make it so only traffic going to netlix makes use of the unblock-us.com dns servers.  I know this can be done by installing dd-wrt and then using dnsmasq, but I would rather not have to go that route if can be done with native firmware.
 
If cannot be done 'out of the box' any other way to do without having to change firmwares?

View 2 Replies View Related

Cisco Wireless :: 5508 - Any Simple Way To Do URL Redirect On Open SSID

Sep 4, 2012

I have an open SSID on 5508 controllers - configured as anchors  and need to redirect wireless clients to the wireless help page automatically once they have connected and opened their browser.I've read all through the web auth and pass through discussions on here but nothing seems to be quiet right for me - unless I am completely missing something.

View 5 Replies View Related

Cisco Wireless :: Web Authentication On WLC 5508 Fails To Redirect / When Enter URL

Oct 19, 2011

I have a problem with a customer of mine. We have deployed two new WLC5508 running r7.0.116.0 and AP1142s, also WCS with r7.0.172. When we setup a "Guest Access" we ran into trouble.The problem is that we can associate to the SSID/AP and get an ip-adress. When we open the web- browser we do not get redirected to the virtual interface but instead the _hostname_ of the WLC. Like this: url...
 
I we manually replace "cisco6a19c4" with 1.1.1.1 it works as it should, the login page appears, we login and can access the internet.We have tested and disabled web-auth on the ssid an everything works, we can directly go out on the internet, DNS works without any problems. [code]Guest network (VLAN) is transfered from WLC via the trunk to the Cat4503 and then connected on a access-port to a separate broadband-router, then to the inetrnet.DHCP to guest-users from separate broadband-router which is def gwy and "DNS".On the virtual interfaces no hostname is configured.

View 6 Replies View Related

Cisco Wireless :: WAP4410N HTTP Redirect And Internet Radios

Mar 12, 2013

I've got a HTTP Redirect to a dedicated html site with our internet usage policy set up on multiple WAP4410N access points.This is working like a charm with laptops, but not with internet radios. They can't connect to the internet probably freezing on the http redirected site.Is there any way to exclude these devices from the redirect?

View 3 Replies View Related

Cisco Wireless :: HTTP Redirect - 2504 WLAN Controller

Apr 23, 2012

I have a 2504 and my goal is to automatically redirect a users home page when they connect to a certain internal website. Authentication isn't a real concern just now.

Is it possible to simply have a users home page redirected when they open their browser upon connecting to the SSID? All of the documents available have stated to use 802.1x / RADIUS or other fancy tools.

View 3 Replies View Related

Cisco Wireless :: ASR1006 L4 Redirect CaptivePortal-DHCP Radius Attributes

Dec 3, 2012

There is an ASR1006 Router in the network that serves as an Intelligent Service Gateway (ISG). Subscribers are layer 2 connected and subscriber sessions are initiated on a DHCP request. ISG is configured as a DHCP relay agent. Wi-Fi clients connect to the WLAN using Open SSID and are being redirected to a Web Portal where they enter their login info. This info is sent to RADIUS server which checks if the user is allowed to use Internet service. All the APs are connected o WLC using CAPWAP. The question is the following: there is a requirement to track from which AP a particular Wi-Fi clients is connected. In this case ISG needs somehow to obtain AP’s mac address and send it to the Radius server (probably using attribute 30 – Called-station-id). One possible way for ISG to obtain AP’s  mac is via WLC. But the thing is that when WLC is configured as DHCP proxy and Option 82 is set, a wireless client does not obtain IP address via DHCP. In this particular case there two DHCP relay/proxy in the network path between client and DHCP server. Is there any other away for ISG to obtain AP’s mac address?

View 8 Replies View Related

Cisco :: 5508 WLC / Guest Wireless - Redirect Page - Username / Password

Feb 19, 2012

I have a 5508 WLC running 6.0.202.0. It functions as the Anchor Controller for the guest network. It sits in our Internet DMZ and is isolated from the rest of the network. It does not connect to AD, ACS, etc. The guest wireless WLAN is configured for Web Policy - Authentication. I have a customized login page. Credential management is done by WCS.
 
Users are connecting to the guest wireless network and entering their creds with no issues using mobile devices (iPad, etc). Then the mobile device goes to sleep / turns off and when they go to use it again, they have to type their creds in again. They dont like retyping their creds throughout the day.
 
good way mitigate the multiple logins? Something like a 'save password' option on the customized page?

View 5 Replies View Related

Cisco Wireless :: 1242 - Cannot Upgrade AP To LWAP Using Upgrade Tool On Windows 7

Sep 29, 2011

I have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP.  However, I go to a coworker's XP machine and run the tool without issues.  On Windows 7 I keep receiving the error message of ACL or Firewall is blocking.  I have added rules and then even tried disabling the firewalls completely on both computers and still no success. 

View 7 Replies View Related

Cisco Wireless :: 5500 AP Upgrade Lic Upgrade On Controller

Jun 19, 2012

I am facing a problem to install a ap upgrade lic file on controller 5500. Iam getting the following error:

% Error: License file transfer failed - Error from server: File not found
 
I have confusion here that when I configure this command from GUI

tftp://172.32.45.22/cmm/standard.lic
 
What i should use for /cmm/  ????
 
Let say i have lic. file is on desktop of tftp server computer and I say in this command
 
tftp://10.12.70.35/??/license file .lic

View 6 Replies View Related

Cisco Firewall :: IP Redirect With PIX 515?

Jan 3, 2012

I have a PIX 515 that i need to use as an ip redirector.For example if users try to access 80.80.80.80 ,they need to be redirected to 90.90.90.90 show ver, 
 
Hardware:   PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
  0: Ext: Ethernet0           : address is 000b.5fad.0c99, irq 10
1: Ext: Ethernet1           : address is 000b.5fad.0c9a, irq 11

[code]....
 
This platform has an Unrestricted (UR) license.

View 12 Replies View Related

IP Redirect Or Forwarding From A To B?

Oct 24, 2012

ip redirect or forwarding. I have a web server with public IP as B.B.B.B, and I have another server with public IP as A.A.A.A.. My web site contents are with B.B.B.B, but I do not want to expose IP B.B.B.B. Users can visit my web site using A.A.A.A, and when they visit A.A.A.A, I would like to have A.A.A.A redirected to B.B.B.B behind scene. Both IP's are public, and stay different locations remotely.How to redirect IP A to B, so I can hide B?The machine with IP A.A.A.A is windows 2003 server standard.

View 5 Replies View Related

Cisco WAN :: 800 Router - Redirect URL To IP Address?

Oct 18, 2011

Is it possible in Cisco 800 Router to redirect a website request coming from a user to an IP address?

View 3 Replies View Related

Cisco VPN :: Redirect On ASA 5520 For SSL VPN Clients

Dec 26, 2011

You have a Cisco ASA 5520 where clients connect using Cisco Anyconnect SSL VPN, say the URL is connect.whatever.org. You would like for when a user enters either [URL] or just connect.whatever.org into their web browser that it automatically puts the required url...

View 1 Replies View Related

Cisco Firewall :: DNS Redirect On ASA5505?

Feb 29, 2012

I want to make it so if a user tries to use a different DNS server the request will be redirected to the one they should be using.I thought this might work but the ASA doesn't do PB routing
 
ip access-list extended transparent_dns
permit udp any any eq 53
route-map redirect_dns permit 10
match ip address transparent_dns
set ip next-hop ip.of.your.server
route-map redirect_dns permit 20

[code]....
 
The DNS server is windows 2003?Would policy based NAT or WCCP work for this? If so how would I go about it?

View 1 Replies View Related

Redirect To Another Site In The Same Server?

Apr 12, 2011

How do I redirect the visits to a specific homepage (web site) to access a "sub" page in the same domain? Is it possible to use the Hosts file to do this? I want redirect visits to [URL]

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved