Cisco 887VAW - Redirect Port 90 To Another IP Address External To Our Own?

Oct 28, 2012

Our company uses a commercial copier monitoring package called FMAudit to obtain meter readings from our clients' copiers, and it uses a feed to send the readings back to us. We have used port 90 for this purpose.Due to a recent server crash and emergency reconfiguration of our network, we have moved our FMAudit central server from in-house to a hosted service, with of course a different external IP address.

Without interfering with our other systems, is there a way to redirect JUST PORT 90 to another IP address external to our own? I don't care if it has to happen at the router or server level. We are using Server 2003 and a Cisco 887VAW.

View 2 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 5520 To Redirect An External Address To An Inside Server

Mar 21, 2012

I am desperate to make some kind of translation which convert an outside IP Address of our web server to its inside ip address so that requests can be routed internally to the server.
 
This is what we have:  A wireless network with an SSID to serve visitors.  We also have an in-house web server which can be accessed internally and externally.  We have a ASA 5520 that protects the internal network, including the Web server, and also routes all traffic from the all visitors connected to the public SSID to the outside.  The DHCP server for the wireless network for visitors is configured to give the 8.8.8.8 as dns server.  The problem with that is that the www.ourwebserver.com is resolved by Google's dns server to the public IP Address of our web server!  The traffic then is sent to the outside interface of the ASA 5520.  The visitor who wants to access our web server cannot connect!
 
How can I configure the ASA to route that traffic to our web server with the public ip address to the inside ip address of the web server?

View 2 Replies View Related

Cisco WAN :: 2600 - Redirect Web Traffic To External Proxy In Specific Port?

Jan 18, 2010

I want to redirect internal web traffic (browsing) to an external web server for Web, Virus and Spyware filtering. Those externals proxies are running in 8080 port. I have one ASA firewall and a Cisco 2600 router. I was thinking in doing PBR in the router but in the next hop I can only set one IP, not an IP and a port. So how can I redirect web traffic to an external proxy listening in 8080 port?

View 11 Replies View Related

Cisco Firewall :: 5505 Port Forward External Clients To 1 Address

May 4, 2011

I have a couple of ASA 5505's which work fine for what they are doing VPN and all that - we have 1 DLINK DFR-700 Firewall left and I need to get a new ASA to replace this since it is old.
 
All this box really does is port forward external clients to 1 address on the internal lan for client software updates. Any example configs?
 
So lets say we have client a with IP 1.1.1.1 and client b has 2.2.2.2 - at the moment this is what happens client a and b come in through http and get mapped to the internal http server 10.10.1.2
 
So I need to setup about 100 clients which can come in through http only - get mapped to the internal IP and also keeping the internal server to be able to access anything outside.

View 1 Replies View Related

Cisco :: LMS 4.1 Redirect Syslog To External Server

May 16, 2012

I would like to know whether LMS 4.1 (local server mode) has the ability to relay syslog messages received from devices to an external syslog server?  If so, how do I configure such?
 
From reading the document and going through the LMS 4.1 GUI, it appears that it could receive and forward messages but only between LMS system (ie. multi server mode) as SSL is required.

View 1 Replies View Related

Cisco :: 2504 Web-Auth Passthrough With External Redirect

Feb 6, 2012

I have a cisco 2504 running 7.0.220.0. I am trying to configure Web Auth for External Redirect, Passthrough. I have a page created on an external web server that was taken from the Web Auth Bundle and modified. It is a simple "accept" or "reject" on a Terms and Conditions page. I have a Pre-Auth ACL configured to only allow communication to the server the T&C page resides on.
 
When I connect to the SSID, the page redirects to the external URL and the the URL shows up in the browser window with all the variable data as a GET on the URL line, but the page never loads. It just hangs. I can copy the the URL data, paste that in once I am on-net, and the page loads just fine.
 
So, something is happening when the WLC is attempting to proxy-redirect the page back to the client.

View 7 Replies View Related

Cisco WAN :: 800 Router - Redirect URL To IP Address?

Oct 18, 2011

Is it possible in Cisco 800 Router to redirect a website request coming from a user to an IP address?

View 3 Replies View Related

Cisco Firewall :: ASA 5505 To Have Internal Address That Wish To Forward From External Address

Jul 8, 2012

I have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.

View 7 Replies View Related

Cisco Firewall :: Redirect Ip Address For Protocol With ASA 5500

Jan 5, 2012

On the inside interface and network, we have a server at, (as an example) 192.168.87.1, which acts as an email server.
 
The outside ip address of the ASA is, say, 200.0.0.1.
 
The ASA directs any imap requests from the outside interface to 192.168.87.1, which works fine from the outside. Users simply open up email, and collect emails etc.
  
When they come inside the office, their machine of course attempts to contact the ip address 200.0.0.1. the ASA knows it is outside interface, so they are unable to collect emails.
 
that any internal IMAP requests from machines on the inside to 200.0.0.1 are directed to the machine inside on 192.168.87.1?

View 5 Replies View Related

Cisco VPN :: ASA5520 - Redirect Single IP Address Through User

Sep 11, 2012

I am having an issue with the user VPNs. For users connected via the AnyConnect VPN client, all of their Internet traffic goes out their local Internet connection, since I am using split tunneling. However, I need a specific public IP address to go through the VPN tunnel and out the DIA at the main office, rather than the user's local internet connection. I managed to have this IP address go through the tunnel to the ASA at the main office, but it appears that it gets blocked somewhere there, or maybe the return traffic gets blocked. I am using an ASA 5520 at the main office, with software version 8.3.

View 3 Replies View Related

Cisco WAN :: No Gui On 887VAW Built In AP?

Jun 6, 2013

I have had a replacement router sent out to me due to a fault with the AP.
 
It had a really old firmware on the AP, which I have updated. Using CCP, I have a wireless network running which is more than I had with the old router.
 
The issue I have is that there is no gui, just a webpage with a few lines showing commands etc.
 
I know tha CLI is probably more powerful, but I prefer a GUI.
 
Looking at the flash of the AP, there seems to be lots of files, which I imagine are part of the gui, so its really just a case of enabling it I would assume.

View 3 Replies View Related

Cisco Firewall :: ASA5540 Port 80 Redirect To Https

Dec 21, 2011

Windows IIS server configured behind a Cisco ASA 5540 listening on port 443 currently. Access-list and static translation configured. I have been ask to redirect all port 80 calls to port 443 for this web site only at the firewall. I have suggested moving it behind our content switch with negative results. Can we do this at the firewall level? how to accomplish the redirect for a single site. 8.2.4 is current code

View 4 Replies View Related

Port Redirect With Default Ports On Application?

Apr 26, 2012

I'm running several game and file servers via a dynamic IP, which I unfortunately cannot change to a static connection for several reasons. I've solved this by using No-IP, which is a Dynamic IP resolution service. This solved the first part of my problem - I can give people IP's for their websites, such as myfreemusic.sytes.net and so forth, but they all HAVE to append their ports to the url - i.e.

site1.sytes.net:90
site2.sytes.net:91

My main problem right now is the game servers - I'm hosting games that default host to 25565, and though I can change the ports the server hosts from, I must give those who want to connect the ports at the end of their urls, i.e.

server1.sytes.net:25566
server2.sytes.net:25567

I know DNS is essentially agnostic when it comes to ports, so no solution there. And I don't think the game (Minecraft vis-a-vis bukkit) supports SRV records, and even if they did, I'd have no idea how to configure them. How can I resolve static urls redirecting to a dynamic IP by pointing them to ports?

To simplify the question -

How can I make server1.sytes.net resolve to port 25566, and server2.sytes.net resolve to port 25567 when the default port is set to 25565?

View 1 Replies View Related

Cisco Firewall :: Redirect Http / Https To Port 8080 PIX 6.3?

Feb 27, 2013

I need to redirect all http and https traffic from one source in a dmz network, to port tcp/8080 on a proxy server on the inside network.
 
The source device doesn't handle proxying very well, so i've been advised to redirect the tcp/80 and tcp/443 ports to tcp/8080 as it passes through the firewall.
 
Scenario is thus:
PIX 515E 6.3 (5)
DMZ server: 172.31.255.250 (Real IP), 10.44.181.236 (NAT IP)
Inside Proxy server: 10.44.132.28 (Real IP), 172.31.255.110 (NAT IP)
 
I've configured a static NAT redirect using the following command: static (inside,dmz) tcp 172.31.255.110 www 10.44.132.28 8080 netmask 255.255.255.255 0 0
 
When I try to add the next command of: static (inside,dmz) tcp 172.31.255.110 443 10.44.132.28 8080 netmask 255.255.255.255 0 0
 
I get the following error: ERROR: duplicate of existing static
 
Is there a work around for this at all or am I stuck with the limitations of the software?

View 2 Replies View Related

Cisco Application :: ACE 4710 / Redirect All Connections From Port 443 To 9443?

Sep 13, 2012

I must  redirect all connections from port 443 to 9443.
 
this is configered and running:            
 
serverfarm host FARM-002
  probe test-xml
  rserver svx-xmlfw-lb-01 9443
    backup-rserver svx-xmlfw-lb-02 9443
    inservice
  rserver svx-xmlfw-lb-02 9443

[code]....
     
I have in the moment following problem. All connections become redirectet to port 9443 but port 8080 shouldn`t be redirectet to port 9443. What can i change in my config to solve this problem?

View 6 Replies View Related

Servers :: Redirect Multiple Domain Names To Same IP / Different Port?

Aug 19, 2012

Redirecting a Domain to a IP:Port I host game servers for friends and strangers alike, but i'd like to make it easier for them all and give them dedicated IPs. Right now I include domain redirecting, but to connect to their server, they have to put in "example.com:xxxxx", x meaning their servers dedicated port. Is there any way that I can redirect a domain directly to "IP:Port"?

View 3 Replies View Related

Motorola SB6120 - Port 888 Redirect To Cable Modem?

Sep 18, 2011

I was working with Motorola SB6120 cable modem regarding an odd power cycle issue (it would power cycle randomly for 24 hours). While trying to diag the issue, I was taking a peak in his router config and found a port set to forward as:

Application: Comcast
Port From: 888
Protocol: Both
IP: 192.168.100.1
Port To: 80

I understand that his modem admin page is now available from the internet. He said his friend set this up to "modem", but I don't see any advantage of having this done. At this point what are the other advantages of forwarding such ports?Another key note: When the port forwarding was disabled, suddenly the power cycle issues stopped.

View 3 Replies View Related

Cisco Routers :: SRP541W Set Up Port Forwarding From External Port

Apr 13, 2013

I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.

View 6 Replies View Related

Cisco Switching/Routing :: Policy Map Redirect Port 80 Switch 3750X

May 15, 2012

I would like to know if it possible to create a policy map in order to redirect the traffic ( 80 , http, 8080) to a proxy.
 
My current equipment its a 3750X using a IP Service License ,I was reviewing some options but i want to be sure before implement in production.

View 8 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies View Related

Cisco Switching/Routing :: Configuring Ssh Access To 887vaW Embedded AP?

May 17, 2012

i got some problem configuring my cisco 887VAW internet access point.I want to be able to manage it thru ssh console with the service-module wlan-ap0 session mode. And i want to access thru http but it's not working too I show you my config

This is my config :
 
Current configuration : 3281 bytes
!
! Last configuration change at 21:43:11 UTC Fri May 18 2012 by jon
! NVRAM config last updated at 21:46:05 UTC Fri May 18 2012 by jon
! NVRAM config last updated at 21:46:05 UTC Fri May 18 2012 by jon
version 15.1

[code]....

View 1 Replies View Related

Cisco Application :: Apply Policy Only On Specific Subnet / Port 443 Traffic Can Be Redirect And Rest

Feb 16, 2012

I am facing problem with ACE configuration. I want to redirect 443 traffic to my Proxy Server. But I am not able to do this. I want to redirect only subnet 192.168.80.0/24..Then only it is working but I dont have to have this policy to be applied on all the users only one subnet I want to have under HTTPS policy.
 
how can I apply the policy only on specific subnet so that port 443 traffic can be redirect and rest of all subnets can go direclty to Internet.

View 8 Replies View Related

Windows 7 - IP Address Has Always Been External?

May 23, 2012

My IP adress has always been external. About 2 years ago, after reinstalling my windows,(I am using and used before reinstalling windows7) my IP adress started to work as it wouldn't be external. I couldn't host servers and stuff like that anymore.I tried turning off firewall, few other tricks but nothing changed.When I look information about my IP adress ,most of the sites see it as external.Also, when I call my interned providers, they tell me that they see my adress as external.

Some details :

-Internet is provided by a cable (not using telephone, TV or something else from those internet dealers)

-I am alone using this internet, no one else is connected to it.

View 4 Replies View Related

Getting External IP Address Of Printer?

Jul 26, 2011

I use an online software host. They put print jobs into a queue and send them directly to my printer. I just got a new printer. The software host needs it's "External IP address" I have my internal IP address. I pinged the printer and got my internal IP address instead of the printer's. I am on a home wired network running through a modem and router.

View 2 Replies View Related

Cisco VPN :: 5510 External IP Address Not Controlled

Aug 19, 2012

We have a strange issue for one of our customers that recently migrated to our internet service.They are trying to vpn to an external ip address not controlled by ourselves. The issue is only on one subnet and isolated to Mac’s, PCs in the same subnet also work fine. They were able to vpn from the MACs before they migrated to our INET solution. They previously used a checkpoint FW for their outside NAT and firewall and now are using a failover pair of asa 5510s. I have packet traced out the firewall and there should be nothing blocked. UDP ports 500 and 4500 are open to the destination ips from the correct subnets. All other subnets with Windows PCs can vpn out to external ip without issue. The users in that subnet with the MACs can also browse internet fine so the routing and nat overloading is also ok
 
When they try to initiate a connection from the macs i can see the connection/xlate coming in from a source port of  udp 4500/500 and also a destination of udp 4500/500 instead of a random source port. Just this evening we managed to get one device connected but no others. Would the fact that the source port is claiming 500 and 4500 stop the other macs using the same source ports at the same time to connect out? They are using the onboard mac vpn client, he can’t get the Cisco one working at the minute. [code]

View 1 Replies View Related

Cisco Switching/Routing :: Add Another External IP Address To Out 881

Nov 18, 2012

We have a Router with one External IP and a couple of VLANs. We have got a Teleconferencing Unit that needs almost every port known to man to work, so decided to get the unit its own External IP.
 
We have the IP now and how to get it in the router and then also to use it only for the Video unit (From outside straight through to Video).
 
Im comfortable adding lines to the router but just don't know what the lines should be.
 
The new IP's purchased are 116.199.222.200/30 (Only need to use one address, lets say 116.199.222.200). No idea what the subnet mask should be...
  
The router config below stripped of irrelevant stuff:
 
interface FastEthernet0
no ip address
!
interface FastEthernet1

[Code]......

View 11 Replies View Related

Difference Between DNS Server And External IP Address?

Oct 11, 2011

Whats the difference between DNS Server and External IP Address? When I dump Ipconfig /all into a .txt file I see that it shows three seperate values for the DNS Server. My question is, since ipconfig /all does not give an external IP address, are they the same? Why are theyre three?

View 2 Replies View Related

Assigning External IP Address To Server

Oct 12, 2011

We once had a virtual server with two network adapters, one was internal and the other was external, and people could access it directly from the internet.

That server recently, died (someone put the .VHD file on a massive RAID 0 array, and that went boom), and I need to set it back up again. All the DNS entries appear to still be there, but how to assign the external IP to the network adapter. I tried Google, but my Google-fu must be weak today as I can't find anything useful.

It's a Server 2008 R2 machine running inside Hyper-V. Nothing's changed except for the new Windows install, it's running with the exact same VM settings, which I didn't touch except to add a new VHD.

View 5 Replies View Related

2 Servers Need Different External IP Address Behind Same Router?

May 22, 2012

I have a client that has 2 servers behind the same router. They have an IP block from Time Warner -> (x.x.x.18-.30) The router has the IP address of x.x.x.18. Server A (192.168.1.6) is setup with the forwarding of ports 22, 23, and 115 and can be seen with the ip address x.x.x.18. An external company needs to access the other server and is requesting an external IP for Server B (192.168.1.5) which need the same ports open along with 6200.What is the best way to set this up with what they have? The router is a Linksys WRT54G. Is there a way to set them up with a x.x.x.19 address from time warner? Is this something time warner will need to do?

View 4 Replies View Related

D-Link DIR-655 :: External IP Address Assignment?

Mar 3, 2011

I have a home desktop, home laptop, and work laptop that I use.  I have Ultra VNC setup on my work laptop that allows me to remote into that machine when I am traveling for work.  I have always been able to use the external IP address (not private) to login into the machine with no problem.  This week, for some reason, I can no longer do that.  When I started doing some discovery, I noticed that when I have all 3 machines booted up at home that the exact same external IP address is assigned to all 3 machines.  The internal IP addresses are all different as they should be.Shouldn't each machine have a seperate external IP address assigned as well?  Or is this working the way it should?  I didn't change any setting on my router or DSL model.  But I think the conflict that VNC is having on my work laptop is that it has the exact same IP as the destination computer and it fails.  I can remote in if I use the private IP address (192.168.x.x) just fine. 

View 1 Replies View Related

Cisco :: ASA5505 Change SIP Internal Address To External One

Sep 15, 2011

The problem is that the PABX is sending out an internal address in it's INVITE messages and the ASA5505 isn't changing the internal address to the external address.We need> From: Calling Number <SIP: SIP Username@Public IP Address>However our PABX sends out> From: Calling Number <SIP: SIP Username@Private IP Address>. How to translate the internal IP address to the external IP address on an ASA 5505?

View 1 Replies View Related

Cisco WAN :: 1941 - Accessing External Address Internally

Sep 17, 2012

Accessing exteral address internally.
 
I have a mail server, with external access which works fine for external access thorugh our router (a 1941). I have a laptop which connects to a wireless network that is inside our router. When attempting to navigate to the webmail or use outlook, it cannot connect.
 
The laptop is configured to access the mail through the external path as it would be offsite occasionally.
 
I think the problem seems to be that the traffic is not leaving the router to come back internally. The laptop can ping the external address ok.
 
I read about something called hairpinning - is this what i need to be looking at?

View 3 Replies View Related

Cisco Firewall :: Using ASDM To Change External IP Address Of 5505?

Mar 13, 2013

We have an ASA 5505 and are changing ISPs so we'll be getting a new static IP address. How do I change the external IP address using ASDM? (I haven't done it in 5 years so I'm rusty and just want ot make sure.) The ASA and ASDM are up to date.Am i correct in that I only need to change the external address in the configuration under Interfaces, then under Routing - Static Routes - Gateway IP I just need to enter the new WAN gateway address?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved