I would like to know whether LMS 4.1 (local server mode) has the ability to relay syslog messages received from devices to an external syslog server? If so, how do I configure such?
From reading the document and going through the LMS 4.1 GUI, it appears that it could receive and forward messages but only between LMS system (ie. multi server mode) as SSL is required.
I am desperate to make some kind of translation which convert an outside IP Address of our web server to its inside ip address so that requests can be routed internally to the server.
This is what we have: A wireless network with an SSID to serve visitors. We also have an in-house web server which can be accessed internally and externally. We have a ASA 5520 that protects the internal network, including the Web server, and also routes all traffic from the all visitors connected to the public SSID to the outside. The DHCP server for the wireless network for visitors is configured to give the 8.8.8.8 as dns server. The problem with that is that the www.ourwebserver.com is resolved by Google's dns server to the public IP Address of our web server! The traffic then is sent to the outside interface of the ASA 5520. The visitor who wants to access our web server cannot connect!
How can I configure the ASA to route that traffic to our web server with the public ip address to the inside ip address of the web server?
Recently i have upgraded the IOS of ASA5550 (in HA mode) to 8.4.2 from 8.0.5, after OS upgrade we found that the syslog from thses firewalls are not getting captured/transfered to centralised syslog server. The server is reachable from the firewalls.
View 3 Replies View RelatedOur company uses a commercial copier monitoring package called FMAudit to obtain meter readings from our clients' copiers, and it uses a feed to send the readings back to us. We have used port 90 for this purpose.Due to a recent server crash and emergency reconfiguration of our network, we have moved our FMAudit central server from in-house to a hosted service, with of course a different external IP address.
Without interfering with our other systems, is there a way to redirect JUST PORT 90 to another IP address external to our own? I don't care if it has to happen at the router or server level. We are using Server 2003 and a Cisco 887VAW.
I have a cisco 2504 running 7.0.220.0. I am trying to configure Web Auth for External Redirect, Passthrough. I have a page created on an external web server that was taken from the Web Auth Bundle and modified. It is a simple "accept" or "reject" on a Terms and Conditions page. I have a Pre-Auth ACL configured to only allow communication to the server the T&C page resides on.
When I connect to the SSID, the page redirects to the external URL and the the URL shows up in the browser window with all the variable data as a GET on the URL line, but the page never loads. It just hangs. I can copy the the URL data, paste that in once I am on-net, and the page loads just fine.
So, something is happening when the WLC is attempting to proxy-redirect the page back to the client.
I want to redirect internal web traffic (browsing) to an external web server for Web, Virus and Spyware filtering. Those externals proxies are running in 8080 port. I have one ASA firewall and a Cisco 2600 router. I was thinking in doing PBR in the router but in the next hop I can only set one IP, not an IP and a port. So how can I redirect web traffic to an external proxy listening in 8080 port?
View 11 Replies View RelatedHow do I redirect the visits to a specific homepage (web site) to access a "sub" page in the same domain? Is it possible to use the Hosts file to do this? I want redirect visits to [URL]
View 5 Replies View RelatedI have a WCS working on version 7.0.172.0.Is there a way to send the alarms produced by WCS to another Syslog Server?
View 4 Replies View RelatedI am trying to setup syslog server on LMS 4.0.Everything seems to be working fine but I have a lot of stragne logs in my syslog.log file.Every single day I receive logs like :
Mar 05 09:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1015) "e:CSCOpxincwjava.exe -cw:jre lib/jre -cp e:CSCOpxMDC omcatsharedlibMICE.jar;e:CSCOpxMDC omcatsharedlibNATIVE.jar;e:CSCOpxMDC omcatsharedlibjdom.jar;e:CSCOpxMDC omcatsharedlibxalan.jar;e:CSCOpxMDC omcatsharedlibxerces.jar;e:CSCOpxMDC omcatcommonlibservlet.jar;e:CSCOpxMDC omcatsharedlibcastor-0.9.5.jar;e:CSCOpxMDC omcatsharedlibcastor-0.9.5-xml.jar;e:CSCOpxlibclasspath;e:CSCOpxwwwclasspath;wwwclasspathvbjorb.jar;MDC omcatwebappsupmWEB-INFclasses;libjrelibendorsedjacorb.jar;MDC omcatwebappsupmWEB-INFlibctm.jar;MDC omcatwebappsupmWEB-INFliblog4j.jar;MDC omcatwebappsupmWEB-INFlibjep-3.2.0.jar;MDC omcatwebappsupmWEB-
[code]....
I dont want to get any logs from 127.0.0.1. Is it possible to filter out logs from server ?
I have ASA5505 with bese-license. I like to install proxy sever in my network and i want redirect traffic to the proxy server.
Below i added configuration in my firewall.
ASA(config)#access-list wccp-servers permit ip host 192.168.6.10 any ASA(config)#access-list wccp-traffic permit ip 192.168.6.0 255.255.255.0 any ASA(config)#wccp web-cache group-list wccp-servers redirect-list wccp-traffic ASA(config)#wccp interface inside web-cache redirect in
furher configuration and if this configuration is enough, then how to check whther its working or not in my firewall.
So I have a proxy server in my home that all the computers use to access the internet (XP Pro). I edited the host file on the proxy to redirect traffic for various reasons (ad blocking, etc.) But I have noticed that it doesn't seem to affect the computers that use the proxy. For example one entry in the host file could be 127.0.0.1 abc123.com so that abc123.com would loopback to the localhost. For some reason this isn't working. Is there anyway to get this to work without changing the host file on each individual computer?
View 3 Replies View RelatedI need to setup a syslog server for PIX w/ 6.2 and was hoping to get detailed instruction how to go about it. I would like exact syntax w/ an example on the pix and any configuration on the computer that will be receiving the log info. I have downloaded tftpd32 onto computer
View 1 Replies View RelatedI want to forward syslog messages that I receive in my Cisco Works server to another server,what is the best way to accomplish this. I'm running LMS3.2 on Solaris 10.
View 3 Replies View RelatedI'm having an issue with the syslog.
My configuration is:
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
On LAN A, I got a NAS with a syslog server. On the RV042, I've set the parameters for the syslog server, and it's working fine. On the RV082, I've set the same parameters and noting is happening.
As troubleshooting, I've done the following:
-On the RV082, I can ping the NAS without problems.
-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.
Is there an .ISO file for installing on Windows Server20888SR2 ?
View 1 Replies View RelatedI got a new Cisco 3845 under my adminsitration. For some special events I do automated actions (e-mail's) from Cisco Works 2000.
One is if power supply fails. Problem now is, tha a ps fail message will be repeated every 20 seconds to syslog server - but local log on router only once.
I have a WAP4410N access Point, firmware 2.0.1.0. I have configured a Kiwi syslog server to get the log from the WAP4410N, but the log information obtained is just the "standard event log" and not the detailed log (every connection source and destination IP address,IP server,and number of bytes transferred) , according to the manual of the access point.what I have to do? firmware update? another syslog server?
View 1 Replies View RelatedHow to set up logging of commands on syslog server ? (cisco nexus 7010)
View 2 Replies View RelatedI have got a Cisco router connected to a LAN and to the internet.I was wondering if I could nat https traffic from inside to internet to a local server (Proxy) on a given port for example tcp 8080.
int tunnel0
ip address 192.168.0.1 255.255.255.0
ip nat inside
int fa0/1
des internet connexion
ip address 41.x.x.x.x 255.255.255.248
ip nat outside
ip access-list extended Proxy_Redirect
permit tcp 192.168.0.0 0.0.0.255 any eq 443
We use multiple ASA 5500/5580 cluster systems running 8.3 software versions.Actually we send all our FW syslog data to a SIEM appliance in a DMZ on a remote firewall (non-asa). Recently we suffered a strange incident while implementing a new SIEM collection station now situated in a dmz that is located on one of the ASA contexts. We redirected the syslog streams to the new client for one of the contexts on the ASA cluster that holds the new SIEM agent DMZ..since we did this and redirected the syslog we see double traffic and spoofing errors on that context
a/ the ASA keeps sending out the syslog traffic to the OLD SIEM agent server ip (there is however no trace of its ip in the config)
b/ the traffic leaving the interconnection interface towards the OLD SIEM agent gets a SPOOFING error on the traffic
c/ strangely the data gets also correctly forwarded to the new SIEM collection stations.
We started out with redirecting traffic on only one of the 5 contexts to the new environment and kept logging the others to the old system.I finally got out of the issue by reconfiguring al the other contexts to forward their syslog towards the same new server , since that moment we no longer have the double logging and spoofing error , all syslog traffic goes correctly to the new SIEM agent. It looked like some remenants of the old syslog config remainded on the asa event after deleting and introducing a new config line (we used the asdm to execute the action) as said either it kept the old config or it looked in the other context and "decided" to keep sending to the old server also mentioned in that syslog can find the behaviour in any buglists either way.
i'm about to configure a syslog server to receive syslog messages from a Cisco ASA5510 and being it a one week test I was wondering how much space should I allocate on the machine hosting the tool (kiwi syslog). I see that the ASA fills the internal syslog buffer to 4MB and then it overrides it. How many messages would those 4MB be?
View 2 Replies View RelatedI am sending TACACS administration logging to a syslog server. When the messages show up on the syslog server, they are 5 hours ahead of the actual time. Time on the ACS is correct - local logging shows the correct time. Time on the syslog server is correct...all other devices/systems sending syslog messages to it are coming through with the correct time. why the ACS syslog messages would be 5 hours ahead?
View 3 Replies View RelatedAdd the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.
View 0 Replies View RelatedI can't seem to send config changes to our syslog server on a 2950, I'm fine with 2960's and 3750's. The Cisco 2955 is using the latest IOS c2955-i6k2l2q4-mz.121-22.EA14.bin.
Here is what I have added:
logging buffered 64000 debugging
logging console informational
logging monitor informational
[Code].....
The only sylog message I get is "Configured from console by username on vty0 (10.1.1.35)
Can i send "show conn" to syslog server? for example:
[code]...
ESTAB5082
I'm looking to configure a syslog server for all of my cisco device logging. I've had a look at CNA and can't find any options to define a syslog server for my switches.
What's the best way to define a syslog server and the severity of the notifications? Also, i'm looking to clear all previous Syste mmessages fon my devices?
I'm trying to view the logs from a Cisco 857W router to a workstation running the Kiwi Syslog server. what I've done is the following:
Config term
Logging on
Logging source-interface BVI1
Logging Facility Local7 (or any other facility you want to allocate for this router.)
Logging [IP Address or Hostname of machine running Kiwi Syslog Server]
End
I see noting on the syslog server. Although I can see the log information on the router Also is there a command to stop the logging from generating or is this on by default.
I have installed a switch (3560) that was from another site and changed all it's config and hostname etc and it is now live, however the syslog messages still see the old hostname, what could be causing this?
View 3 Replies View RelatedI have configured my 2951 router to send logs to my Kiwi syslog server like below.
#logging 10.20.20.52
But I am not receiving any logs from my router, the same has configured on my asa5520 and its sending logs.
I have recently setup Splunk to receive my syslog messages from my ASA 5510. In the past I used kiwi without observing this issue, but I needed more features than kiwi had available. Anyway, anytime I stop the splunk service my asa does not allow any outbound connections to be established.
View 2 Replies View RelatedI am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
We have a business case where we have a group of ASA 5505's in 3 locations with anyconnect user licensing on all 3 for redundancy.The problem we are facing is that when we need to authenticate our anyconnect clients we use active directory servers located at site 1 and the other 2 sites need to contact these MS AD Servers over an already connected VPN tunnel to site 1 (IPSec l2l) but cannot.So the layout is as follows:Site 1 (houses AD servers) has l2l tunnels to site 2 and 3Site 2 (any connect essentials enabled) has l2l tunnel to site 1 and 3Site 3 (any connect essentials enabled) has l2l tunnel to site 2 and 3AD servers are ip'd as 10.1.1.11 and 10.1.1.4If I use anyconnect to site 1 it authenticates fine - as expected.Site 2 and site 3 fails to contact AD serverAny thoughts on how we can accomplish this(or is it even possible to do?) without exposing the AD server in a DMZ or via external ip?
View 1 Replies View RelatedI have a Cisco ASA5505 and windows DHCP server, how do I add this external server to ASA so my PC clients can get DHCP from this server?
View 3 Replies View Related