Cisco :: 7.0.172.0 / WCS Alarms To Syslog Server?
Jul 26, 2011I have a WCS working on version 7.0.172.0.Is there a way to send the alarms produced by WCS to another Syslog Server?
View 4 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5500 Syslog Not Getting Captured In Centralised Syslog Server
Jan 15, 2012Recently i have upgraded the IOS of ASA5550 (in HA mode) to 8.4.2 from 8.0.5, after OS upgrade we found that the syslog from thses firewalls are not getting captured/transfered to centralised syslog server. The server is reachable from the firewalls.
View 3 Replies View RelatedCisco :: Setup Syslog Server On LMS 4.0?
Mar 4, 2012I am trying to setup syslog server on LMS 4.0.Everything seems to be working fine but I have a lot of stragne logs in my syslog.log file.Every single day I receive logs like :
Mar 05 09:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1015) "e:CSCOpxincwjava.exe -cw:jre lib/jre -cp e:CSCOpxMDC omcatsharedlibMICE.jar;e:CSCOpxMDC omcatsharedlibNATIVE.jar;e:CSCOpxMDC omcatsharedlibjdom.jar;e:CSCOpxMDC omcatsharedlibxalan.jar;e:CSCOpxMDC omcatsharedlibxerces.jar;e:CSCOpxMDC omcatcommonlibservlet.jar;e:CSCOpxMDC omcatsharedlibcastor-0.9.5.jar;e:CSCOpxMDC omcatsharedlibcastor-0.9.5-xml.jar;e:CSCOpxlibclasspath;e:CSCOpxwwwclasspath;wwwclasspathvbjorb.jar;MDC omcatwebappsupmWEB-INFclasses;libjrelibendorsedjacorb.jar;MDC omcatwebappsupmWEB-INFlibctm.jar;MDC omcatwebappsupmWEB-INFliblog4j.jar;MDC omcatwebappsupmWEB-INFlibjep-3.2.0.jar;MDC omcatwebappsupmWEB-
[code]....
I dont want to get any logs from 127.0.0.1. Is it possible to filter out logs from server ?
Cisco Firewall :: Syslog Server Setup Pix 6.2?
May 9, 2011I need to setup a syslog server for PIX w/ 6.2 and was hoping to get detailed instruction how to go about it. I would like exact syntax w/ an example on the pix and any configuration on the computer that will be receiving the log info. I have downloaded tftpd32 onto computer
View 1 Replies View RelatedCisco :: LMS 4.1 Redirect Syslog To External Server
May 16, 2012I would like to know whether LMS 4.1 (local server mode) has the ability to relay syslog messages received from devices to an external syslog server? If so, how do I configure such?
From reading the document and going through the LMS 4.1 GUI, it appears that it could receive and forward messages but only between LMS system (ie. multi server mode) as SSL is required.
Cisco :: LMS3.2 - Forward Syslog To Another Server
Feb 12, 2012I want to forward syslog messages that I receive in my Cisco Works server to another server,what is the best way to accomplish this. I'm running LMS3.2 on Solaris 10.
View 3 Replies View RelatedCisco Routers :: Cannot Send Syslog To Server From A RV082
Mar 9, 2013I'm having an issue with the syslog.
My configuration is:
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
On LAN A, I got a NAS with a syslog server. On the RV042, I've set the parameters for the syslog server, and it's working fine. On the RV082, I've set the same parameters and noting is happening.
As troubleshooting, I've done the following:
-On the RV082, I can ping the NAS without problems.
-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.
Cisco :: LMS 4.2 Syslog Collector For Windows Server 2008SR2?
Jan 16, 2013Is there an .ISO file for installing on Windows Server20888SR2 ?
View 1 Replies View RelatedCisco :: 3845 Syslog Repeats Every 20 Sec To Server Only Once Local
Mar 19, 2013I got a new Cisco 3845 under my adminsitration. For some special events I do automated actions (e-mail's) from Cisco Works 2000.
One is if power supply fails. Problem now is, tha a ps fail message will be repeated every 20 seconds to syslog server - but local log on router only once.
Cisco Wireless :: WAP4410N Detailed Log With Syslog Server?
Feb 7, 2011I have a WAP4410N access Point, firmware 2.0.1.0. I have configured a Kiwi syslog server to get the log from the WAP4410N, but the log information obtained is just the "standard event log" and not the detailed log (every connection source and destination IP address,IP server,and number of bytes transferred) , according to the manual of the access point.what I have to do? firmware update? another syslog server?
View 1 Replies View RelatedCisco :: Logging Of Commands On Syslog Server 7010
Dec 25, 2012How to set up logging of commands on syslog server ? (cisco nexus 7010)
View 2 Replies View RelatedCisco Firewall :: ASA 5500 / 5580 Syslog Keeps Sending To Old Server
Oct 26, 2011We use multiple ASA 5500/5580 cluster systems running 8.3 software versions.Actually we send all our FW syslog data to a SIEM appliance in a DMZ on a remote firewall (non-asa). Recently we suffered a strange incident while implementing a new SIEM collection station now situated in a dmz that is located on one of the ASA contexts. We redirected the syslog streams to the new client for one of the contexts on the ASA cluster that holds the new SIEM agent DMZ..since we did this and redirected the syslog we see double traffic and spoofing errors on that context
a/ the ASA keeps sending out the syslog traffic to the OLD SIEM agent server ip (there is however no trace of its ip in the config)
b/ the traffic leaving the interconnection interface towards the OLD SIEM agent gets a SPOOFING error on the traffic
c/ strangely the data gets also correctly forwarded to the new SIEM collection stations.
We started out with redirecting traffic on only one of the 5 contexts to the new environment and kept logging the others to the old system.I finally got out of the issue by reconfiguring al the other contexts to forward their syslog towards the same new server , since that moment we no longer have the double logging and spoofing error , all syslog traffic goes correctly to the new SIEM agent. It looked like some remenants of the old syslog config remainded on the asa event after deleting and introducing a new config line (we used the asdm to execute the action) as said either it kept the old config or it looked in the other context and "decided" to keep sending to the old server also mentioned in that syslog can find the behaviour in any buglists either way.
Cisco Security :: Syslog Server Disk Space With ASA5510
Mar 13, 2011i'm about to configure a syslog server to receive syslog messages from a Cisco ASA5510 and being it a one week test I was wondering how much space should I allocate on the machine hosting the tool (kiwi syslog). I see that the ASA fills the internal syslog buffer to 4MB and then it overrides it. How many messages would those 4MB be?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2.1.15.4 Logging To Syslog Server - Time Off 5 Hours
Dec 12, 2011I am sending TACACS administration logging to a syslog server. When the messages show up on the syslog server, they are 5 hours ahead of the actual time. Time on the ACS is correct - local logging shows the correct time. Time on the syslog server is correct...all other devices/systems sending syslog messages to it are coming through with the correct time. why the ACS syslog messages would be 5 hours ahead?
View 3 Replies View RelatedCisco Routers :: SA 500 - Ability To Send Syslog Events To Multiple Syslog Servers
Jul 7, 2012Add the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.
View 0 Replies View RelatedCisco Switching/Routing :: 2955 - Send Configuration Changes To Syslog Server?
Apr 27, 2012I can't seem to send config changes to our syslog server on a 2950, I'm fine with 2960's and 3750's. The Cisco 2955 is using the latest IOS c2955-i6k2l2q4-mz.121-22.EA14.bin.
Here is what I have added:
logging buffered 64000 debugging
logging console informational
logging monitor informational
[Code].....
The only sylog message I get is "Configured from console by username on vty0 (10.1.1.35)
Cisco Application :: 5082 - Send Show Connection To Syslog Server?
Aug 8, 2011Can i send "show conn" to syslog server? for example:
[code]...
ESTAB5082
Cisco Switching/Routing :: 3750 - Configure Syslog Server For All Of Device Logging?
Feb 5, 2012I'm looking to configure a syslog server for all of my cisco device logging. I've had a look at CNA and can't find any options to define a syslog server for my switches.
What's the best way to define a syslog server and the severity of the notifications? Also, i'm looking to clear all previous Syste mmessages fon my devices?
Cisco Switching/Routing :: 857W - Cannot See Any Logging Information From Router To Syslog Server
May 5, 2013I'm trying to view the logs from a Cisco 857W router to a workstation running the Kiwi Syslog server. what I've done is the following:
Config term
Logging on
Logging source-interface BVI1
Logging Facility Local7 (or any other facility you want to allocate for this router.)
Logging [IP Address or Hostname of machine running Kiwi Syslog Server]
End
I see noting on the syslog server. Although I can see the log information on the router Also is there a command to stop the logging from generating or is this on by default.
Cisco Switching/Routing :: 3560 - Hostname On Switch Shows As On Name On Syslog Server?
Apr 16, 2013I have installed a switch (3560) that was from another site and changed all it's config and hostname etc and it is now live, however the syslog messages still see the old hostname, what could be causing this?
View 3 Replies View RelatedCisco Switching/Routing :: Configure 2951 To Send Logs To Kiwi Syslog Server?
Dec 21, 2011I have configured my 2951 router to send logs to my Kiwi syslog server like below.
#logging 10.20.20.52
But I am not receiving any logs from my router, the same has configured on my asa5520 and its sending logs.
Cisco Firewall :: ASA 5510 / Outbound Internet Access Not Allowed When Syslog Server Is Rebooted
Jun 27, 2011I have recently setup Splunk to receive my syslog messages from my ASA 5510. In the past I used kiwi without observing this issue, but I needed more features than kiwi had available. Anyway, anytime I stop the splunk service my asa does not allow any outbound connections to be established.
View 2 Replies View RelatedCisco Switching/Routing :: 1841 - Unable To Make Router To Send Syslog Messages To Server
Dec 15, 2012I am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
Cisco :: Lost Alarms With Prime LMS 4.1
Nov 23, 2011We are currently implementing the new Prime LMS (4.1), and we met some strange problems with the «Alarms» (footer/bottom right).Under implementation we had a bunch of false positive alerts, so we went in and ticked of all of them to choose «Own it» and «Clear».Something happened and the browser crashed, and when opening the browser again and browsing to the “Fault monitor” from “Alarms” could we see that all the alarms was cleared from the view, but LMS was still telling us that there is two alarms (down in the footer/bottom right).
When going into the “Fault monitor” from clicking on “Alarms” we got the “spinning wheel of death”.The browser crashes after a while and we have to log in again.Now, when we have some alarms after rebooting the WLC’s, we get the 6 alarms from interfaces down, but the two remaining alarms it’s talking about is nowhere to be found.
Future more, the browser crashes yet again after a while and we have to log in again.If we are doing other tasks, and keeping away from the “Fault monitor” everything is working fine.The browser crash/lms hang occurs only when accessing the “Fault monitor” section.
We have looked everywhere for what is causing this. Something with the two alarms that’s lost in the system keeps the browser/lms to crash. But damned if I can find where to get rid of them / clear them.
Cisco :: LMS 4.0 Interface Down Alarms Are Not Generating
Jun 19, 2012I am unable to see the interface down alarms on my cisco works LMS 4.0 .
This problem is happening only for the Gigabit interfaces , i m receiving the alarms for the POS interfaces . The router status is showning as known .i have also added this interface in poller also .
AAA/Identity/Nac :: ACS 5.3.0.40.6 - How To Stop Alarms
Apr 1, 2013This coming from multiple servers, but mostly its generated by the most utilized ACS server.At this time, we are running ACS 5.3.0.40.6
No impact just annoying alarms. How to stop these alarms ?
Am using OOB modems on network resource routers used as aaa clients.Nothing connected to ACS console ports.Only 8 character usernames with AD.
I do see a few software defect / enhancements for ACS ver 5.3. When they will be fixed / enhanced?
Cisco WAN :: LMS 4.2.3 Is Not Generating Protocol Flap / Down Alarms?
Apr 10, 2013We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.After escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 2 Replies View RelatedCisco Application :: ANM 5.2.1 Device Down False Alarms?
Jan 5, 2013Facing false alarm issues with ANM 5.2.1. Basically ANM is sending device down (ACE-30 module) messages occasionally, but in real the device has never went down.
Message:
ANM Server Host Name : anm-1
ANM Server IP Address : 10.9.20.1
Device ID : AGG-B:3
Component Name : AGG-B:3
Severity : info
[code]....
Cisco :: Prime Infrastructure 1.2 Not Sending Alarms Emails
Feb 7, 2013I have setup a new Prime server 1.2 and am monitoring routers and switches from it. It shows me the device status and all as expected. now when i manually turn off the connectivity of one switch, i do see the alarm generated by the Prime but it doesnt send the email notification.
i checked my mail server settings and have right details of the mail server and email address of the recipient. Also when i run test on that page, i can see the test email coming through.
Cisco :: LMS 4.1 Taking SNMP Trap To Email Alarms
Feb 1, 2012Upgraded LMS to 4.1. Yep basically reinstalled. However I can't remember how I did a couple of thing on the original system.
I am trying to take the traps from the Cisco equipment to the LMS and generate e-mail. How do I take the incoming traps (Crit and Warning) and send an e-mail alarm. I'll plan to control what to trap on at the Cisco Equipment.
SNMP trap is set from a fan fault, the Cisco send a trap to the LMS. Now I want take that trap and forward via an email.
I have been reading the admin documentation on "Notification and Action Setting". I see how to take the Cisco LMS created trap and email alarm. (In this case I need a specific trap that LMS did not have.) I see how to take Cisco Traps and resend them to other NMS.
Cisco :: CASR 1000 And ASR 9000 To Remove Alarms For These Equipments
Oct 12, 2011I have many alarms with CWLMS 4.0. The alarms are OutOf Range Voltage, OutOfRange Temperature and OutOfRange Memory. I don´t know how eliminate this alarms for these equipaments. I am trying with Setting up the thresholds but nothing.
View 3 Replies View RelatedCisco Switching/Routing :: LMS 4.2.3 Is Not Generating Protocol Flap / Down Alarms?
Apr 10, 2013We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.after escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 1 Replies View RelatedCisco Switching/Routing :: Check History Alarms In Router 7609?
Oct 26, 20111. How to check the history alarms in Router 7609?
2. How to check whether an Interface was down?