Cisco :: LMS3.2 - Forward Syslog To Another Server
Feb 12, 2012I want to forward syslog messages that I receive in my Cisco Works server to another server,what is the best way to accomplish this. I'm running LMS3.2 on Solaris 10.
View 3 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5500 Syslog Not Getting Captured In Centralised Syslog Server
Jan 15, 2012Recently i have upgraded the IOS of ASA5550 (in HA mode) to 8.4.2 from 8.0.5, after OS upgrade we found that the syslog from thses firewalls are not getting captured/transfered to centralised syslog server. The server is reachable from the firewalls.
View 3 Replies View RelatedCisco :: 7.0.172.0 / WCS Alarms To Syslog Server?
Jul 26, 2011I have a WCS working on version 7.0.172.0.Is there a way to send the alarms produced by WCS to another Syslog Server?
View 4 Replies View RelatedCisco :: Setup Syslog Server On LMS 4.0?
Mar 4, 2012I am trying to setup syslog server on LMS 4.0.Everything seems to be working fine but I have a lot of stragne logs in my syslog.log file.Every single day I receive logs like :
Mar 05 09:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1015) "e:CSCOpxincwjava.exe -cw:jre lib/jre -cp e:CSCOpxMDC omcatsharedlibMICE.jar;e:CSCOpxMDC omcatsharedlibNATIVE.jar;e:CSCOpxMDC omcatsharedlibjdom.jar;e:CSCOpxMDC omcatsharedlibxalan.jar;e:CSCOpxMDC omcatsharedlibxerces.jar;e:CSCOpxMDC omcatcommonlibservlet.jar;e:CSCOpxMDC omcatsharedlibcastor-0.9.5.jar;e:CSCOpxMDC omcatsharedlibcastor-0.9.5-xml.jar;e:CSCOpxlibclasspath;e:CSCOpxwwwclasspath;wwwclasspathvbjorb.jar;MDC omcatwebappsupmWEB-INFclasses;libjrelibendorsedjacorb.jar;MDC omcatwebappsupmWEB-INFlibctm.jar;MDC omcatwebappsupmWEB-INFliblog4j.jar;MDC omcatwebappsupmWEB-INFlibjep-3.2.0.jar;MDC omcatwebappsupmWEB-
[code]....
I dont want to get any logs from 127.0.0.1. Is it possible to filter out logs from server ?
Cisco Firewall :: Syslog Server Setup Pix 6.2?
May 9, 2011I need to setup a syslog server for PIX w/ 6.2 and was hoping to get detailed instruction how to go about it. I would like exact syntax w/ an example on the pix and any configuration on the computer that will be receiving the log info. I have downloaded tftpd32 onto computer
View 1 Replies View RelatedCisco :: LMS 4.1 Redirect Syslog To External Server
May 16, 2012I would like to know whether LMS 4.1 (local server mode) has the ability to relay syslog messages received from devices to an external syslog server? If so, how do I configure such?
From reading the document and going through the LMS 4.1 GUI, it appears that it could receive and forward messages but only between LMS system (ie. multi server mode) as SSL is required.
Cisco Routers :: Cannot Send Syslog To Server From A RV082
Mar 9, 2013I'm having an issue with the syslog.
My configuration is:
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
On LAN A, I got a NAS with a syslog server. On the RV042, I've set the parameters for the syslog server, and it's working fine. On the RV082, I've set the same parameters and noting is happening.
As troubleshooting, I've done the following:
-On the RV082, I can ping the NAS without problems.
-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.
Cisco :: LMS 4.2 Syslog Collector For Windows Server 2008SR2?
Jan 16, 2013Is there an .ISO file for installing on Windows Server20888SR2 ?
View 1 Replies View RelatedCisco :: 3845 Syslog Repeats Every 20 Sec To Server Only Once Local
Mar 19, 2013I got a new Cisco 3845 under my adminsitration. For some special events I do automated actions (e-mail's) from Cisco Works 2000.
One is if power supply fails. Problem now is, tha a ps fail message will be repeated every 20 seconds to syslog server - but local log on router only once.
Cisco Wireless :: WAP4410N Detailed Log With Syslog Server?
Feb 7, 2011I have a WAP4410N access Point, firmware 2.0.1.0. I have configured a Kiwi syslog server to get the log from the WAP4410N, but the log information obtained is just the "standard event log" and not the detailed log (every connection source and destination IP address,IP server,and number of bytes transferred) , according to the manual of the access point.what I have to do? firmware update? another syslog server?
View 1 Replies View RelatedCisco :: Logging Of Commands On Syslog Server 7010
Dec 25, 2012How to set up logging of commands on syslog server ? (cisco nexus 7010)
View 2 Replies View RelatedCisco Firewall :: ASA 5500 / 5580 Syslog Keeps Sending To Old Server
Oct 26, 2011We use multiple ASA 5500/5580 cluster systems running 8.3 software versions.Actually we send all our FW syslog data to a SIEM appliance in a DMZ on a remote firewall (non-asa). Recently we suffered a strange incident while implementing a new SIEM collection station now situated in a dmz that is located on one of the ASA contexts. We redirected the syslog streams to the new client for one of the contexts on the ASA cluster that holds the new SIEM agent DMZ..since we did this and redirected the syslog we see double traffic and spoofing errors on that context
a/ the ASA keeps sending out the syslog traffic to the OLD SIEM agent server ip (there is however no trace of its ip in the config)
b/ the traffic leaving the interconnection interface towards the OLD SIEM agent gets a SPOOFING error on the traffic
c/ strangely the data gets also correctly forwarded to the new SIEM collection stations.
We started out with redirecting traffic on only one of the 5 contexts to the new environment and kept logging the others to the old system.I finally got out of the issue by reconfiguring al the other contexts to forward their syslog towards the same new server , since that moment we no longer have the double logging and spoofing error , all syslog traffic goes correctly to the new SIEM agent. It looked like some remenants of the old syslog config remainded on the asa event after deleting and introducing a new config line (we used the asdm to execute the action) as said either it kept the old config or it looked in the other context and "decided" to keep sending to the old server also mentioned in that syslog can find the behaviour in any buglists either way.
Cisco Security :: Syslog Server Disk Space With ASA5510
Mar 13, 2011i'm about to configure a syslog server to receive syslog messages from a Cisco ASA5510 and being it a one week test I was wondering how much space should I allocate on the machine hosting the tool (kiwi syslog). I see that the ASA fills the internal syslog buffer to 4MB and then it overrides it. How many messages would those 4MB be?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2.1.15.4 Logging To Syslog Server - Time Off 5 Hours
Dec 12, 2011I am sending TACACS administration logging to a syslog server. When the messages show up on the syslog server, they are 5 hours ahead of the actual time. Time on the ACS is correct - local logging shows the correct time. Time on the syslog server is correct...all other devices/systems sending syslog messages to it are coming through with the correct time. why the ACS syslog messages would be 5 hours ahead?
View 3 Replies View RelatedCisco Routers :: SA 500 - Ability To Send Syslog Events To Multiple Syslog Servers
Jul 7, 2012Add the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.
View 0 Replies View RelatedCisco Switching/Routing :: 2955 - Send Configuration Changes To Syslog Server?
Apr 27, 2012I can't seem to send config changes to our syslog server on a 2950, I'm fine with 2960's and 3750's. The Cisco 2955 is using the latest IOS c2955-i6k2l2q4-mz.121-22.EA14.bin.
Here is what I have added:
logging buffered 64000 debugging
logging console informational
logging monitor informational
[Code].....
The only sylog message I get is "Configured from console by username on vty0 (10.1.1.35)
Cisco Application :: 5082 - Send Show Connection To Syslog Server?
Aug 8, 2011Can i send "show conn" to syslog server? for example:
[code]...
ESTAB5082
Cisco Switching/Routing :: 3750 - Configure Syslog Server For All Of Device Logging?
Feb 5, 2012I'm looking to configure a syslog server for all of my cisco device logging. I've had a look at CNA and can't find any options to define a syslog server for my switches.
What's the best way to define a syslog server and the severity of the notifications? Also, i'm looking to clear all previous Syste mmessages fon my devices?
Cisco Switching/Routing :: 857W - Cannot See Any Logging Information From Router To Syslog Server
May 5, 2013I'm trying to view the logs from a Cisco 857W router to a workstation running the Kiwi Syslog server. what I've done is the following:
Config term
Logging on
Logging source-interface BVI1
Logging Facility Local7 (or any other facility you want to allocate for this router.)
Logging [IP Address or Hostname of machine running Kiwi Syslog Server]
End
I see noting on the syslog server. Although I can see the log information on the router Also is there a command to stop the logging from generating or is this on by default.
Cisco Switching/Routing :: 3560 - Hostname On Switch Shows As On Name On Syslog Server?
Apr 16, 2013I have installed a switch (3560) that was from another site and changed all it's config and hostname etc and it is now live, however the syslog messages still see the old hostname, what could be causing this?
View 3 Replies View RelatedCisco WAN :: Forward TCP Port To Server On LAN - 5510
Jul 2, 2012I need to forward traffic from an Amazon server to an internal server with a SQL database on it so need to forward TCP 1433 to an internal IP (192.168.252.43) I have created an access rule to allow the amazon IPP through on 1433 but I am unsure how to point the traffic to the SQL server on the LAN.
I expect I will need to create a NAT rule to do this but cannot see how to achieve it.
I have another problem concerning a site to site VPN which establishes OK but does not pass traffic, I will post that question separately.
Cisco Switching/Routing :: Configure 2951 To Send Logs To Kiwi Syslog Server?
Dec 21, 2011I have configured my 2951 router to send logs to my Kiwi syslog server like below.
#logging 10.20.20.52
But I am not receiving any logs from my router, the same has configured on my asa5520 and its sending logs.
Cisco Firewall :: ASA 5510 / Outbound Internet Access Not Allowed When Syslog Server Is Rebooted
Jun 27, 2011I have recently setup Splunk to receive my syslog messages from my ASA 5510. In the past I used kiwi without observing this issue, but I needed more features than kiwi had available. Anyway, anytime I stop the splunk service my asa does not allow any outbound connections to be established.
View 2 Replies View RelatedPort Forward A Minecraft Server?
Sep 6, 2011Im trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
Cisco WAN :: Set Up 3745 To Forward Incoming Connections To Server?
Mar 2, 2012I have a Cisco 3745 that is my internet router, I have a domain that directs the web address to the WAN IP address...Can I set up my 3745 to forward incoming connections to my server?
View 3 Replies View RelatedCisco WAN :: 877w Port Forward 80 And 443 To Internal Server
Feb 21, 2012I'm new to the Cisco world and have so far got internet and VPN working (without SDM) using the IOS commands.I have hit a stubling block with port forwarding ports 80 (http) and 443 (https) to my small business server for outlook web access.I need to forward port 80 and 442 to internal LAN server 192.168.10.1.The Cisco 877 has a local IP address of 192.168.10.254. [code]
View 6 Replies View RelatedCisco Switching/Routing :: 1841 - Unable To Make Router To Send Syslog Messages To Server
Dec 15, 2012I am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
Cisco Routers :: RV180W And Server Logs / How To Get It To Forward Remote IP
Mar 25, 2013I updated my RV180W to the latest firmware and found that port forwarding works I started using it.I've just noticed that since changing over to the RV180W, my Apacher server logs show the router's IP address instead of the remote IP address - every remote request appears to come from 192.168.0.1.
How do I get it to forward the remote IP.
Cisco Switching/Routing :: Port Forward To HTTP Server 3745
Apr 18, 2012I need getting access to my http server. I have a host name that I configured to point to my IPS IP address. Port 80 is enabled on my server, but I can't seem to get access it from my web address [code]
View 5 Replies View RelatedCisco VPN :: Forward L2TP IPsec 5510 Requests To ForeFront TMG Server
Mar 3, 2012I have added an ASA 5510 to my network between the Internet and a Windows 2008R2 server running ForeFront TMG. Before the ASA was added, vpn clients using Microsoft Windows 7 vpn client using L2TP/IPsec connected to our vpn. After ASA was added, clients can no longer connect. I would like to know how to configure the ASA to forward the vpn requests to the ForeFront TMG server for authentication and access to internal network resources. Mail is forwarded appropriately through the ASA to internal mail server and Internet access for LAN users works just fine.
Topology:
ASA 5510 (outside interface is ISP IP address, inside interface is 192.168.1.1)................Forefront TMG (outside nic 192.168.1.2, inside nic is LAN gateway IP address).
I have altered the registry key of the client vpn pc's per Microsoft Technet URL
Linksys Wireless Router :: WRT55AG V2 Cannot Port Forward To A Web Server
Mar 19, 2007I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off
View 3 Replies View RelatedCisco Switching/Routing :: Configure 1941 With Routed Subnet From ISP To Forward To Server
Feb 13, 2013I have some questions about how to configure my Cisco 1941 with a routed subnet from my ISP to forward them to 1 or more servers in my LAN.1 Routed subnet /29 from my ISP (over a fiber connection).In my LAN I have (at the moment) 3 servers, and about 15 clients.I would like to use the first ip address from the routed subnet for internet traffic from all the clients in the LAN.I would like to use the second ip address from the routed subnet for server1 so that server1 accept some allowed connections and that server1 connects to the internet with the second ip address from the routed subnet
I would like to use the thirth ip address from the routed subnet for server2 so that server2 accept some allowed connections and that server2 connects to the internet with the thirth ip address from the routed subnet.I would like to use the fourth ip address from the routed subnet for server3 so that server3 accept some allowed connections and that server3 connects to the internet with the fourth ip address from the routed subnet.[code]
Cisco :: LMS3.2 Install Without DNS
Jan 18, 2012Got following problem with an LMS server that is installed without DNS server in the network, because this customer doesnt own and doesnt need any.
CS,CM,CV is working and contains devices, but RME (cannot connect to db) and DFM (TIS URN found) not. pdshow and dbRestoreOrig.pl after calling, hangs for ever.
To loose no further time with troubleshooting, I want to reinstall LMS from the scratch.
But I dont want to setup an DNS server just for resolving the only IP-Adresse from LMS server for self purpose only. Do I need an entry in driversetchosts for LMS server itself?
<IP> <Name> <Name>.<Fake-and-complete-unimportend-domin>
Do I need a fake-Domain? or can Domain be empty?
OS=Win2008,R1,SP1 as Standaloneserver (WORKGROUP)