Linksys Wireless Router :: WRT55AG V2 Cannot Port Forward To A Web Server

Mar 19, 2007

I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT55AG V2 - Want To Establish Static IP's

Oct 5, 2011

I use a  WRT55AG v2 router.  Its been the center of my home network for about 8 years.  The network consists of 2 wired PC'S, NAS, MEDIA SERVER, Solar Monitoring Device, Network Printer and several laptops, all of which used WINXP-SP3.  The network was fairly stable until we started replacing machines with a WIN7 OS.I prefer a wired network and everything except the laptops, all have static IP's assigned.Now for some reason we're getting error messages for "IP conflicts" originating from the laptops hooking up wireless and the router assigning a DHCP IP within the range of Static IP's that I've reserved for wired devices.I want to direct the router to establish DHCP wireless IP's (for visistors) in a specific range and also allow me to establish Static wireless IP's within a specified range for our laptops, kindles, etc. 

View 2 Replies View Related

Linksys Wireless Router :: WRT55AG Not Running Properly

Jun 3, 2012

My network consists of a Hughes 7000S modem and Linksys WRT55AG Router.  My Windows 7 desktop is hardwired to the router while my wife's Vista computer is connected wirelessly.I recently had to reset the router.  When I tried to change the router's password from the familiar "Admin" to a WEP code, the change was never made, although I clicked on "save settings".  This has been a persistant  problem. I solved this by clicking on "Administration>Management" and entering my own code, however, this has never been necessary before.I am also getting inconsistant "DNS errors".  It appears erroneous addresses are being generated.I've downloaded and installed updated firmware.This Linksys router uses WEP security. 

View 6 Replies View Related

Linksys Wireless Router :: E1000 Can't Forward A Port

May 15, 2013

I have my router set up and life was good. i now want to forward a port. i go into apllications/gaming put the application name, the port i want to forward and click enable. Save changes and i get a changes save message. When the browser goes back to the applications/gaming screen no port shows as being forwarded. If i go to canyouseemenow.org the port shows as being closed.

View 3 Replies View Related

Linksys Wireless Router :: How To Port Forward An EA3500

Aug 7, 2012

Windows 7 64 bit  /  Linksys EA3500  /  (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased  the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500? 

View 2 Replies View Related

Linksys Wireless Router :: Wrt310N - Trying To Forward A Port?

Nov 25, 2011

Having a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Port Forward To Broadcast For WOL?

Jan 25, 2011

Some routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Port 80 Forward Fails

Sep 2, 2011

I encounter a problem setting up port 80 forwarding on WRT54g router.
 
Configuration:

- Numericable modem

- WRT54G router : portforwarding configured, accepting anonymous internet traffic, no DMZ, no port-triggering... in fact everything is fine except for ports 80/443

- Linux Ubuntu server + Apache2 listening *:80 and/or *:15001
 
1/ Situation 1: Apache listening on server's *:15001

-> Accessing from Internet (outside LAN) works very fine.

-> Portforwarding of router:15001 to server:15001 (TCP) works fine.
 
2/ Situation 2: Apache listening on server *:80

-> Accessing from Internet (outside LAN) FAILS.

-> Portforwarding of router:80 to server:80 (TCP) doesn't work. Diagnostic using the client machine's firewall tool showed the request doesn't get any return... no traffic back at all.
 
The system being fully operational when using port:15001 shows the problem does not come from server configuration.I still have to try a bypass of my router by plugging the modem directly on the server eth card.

-> If that works it would definitely prove the problem comes from the router, precisely the portforwarding feature as applied to port:80.
 
My guess is the following:

- As WRT54g router's remote administration interface is precisely set to listen 80/443 ports.

- As I still did not disable remote administration as I need it, but I will come to such extremities (very soon in fact as despair is gaining me

- Looks like WRT54g is unable to forward port 80 as this is it's remote administration port. You can set it up, but it just won't work, and there's no warning
 
Solutions?

- Disable remote administration? (will it work ? cause I would not risk to disable it for nothing...)

- Have remote administration litening on different ports than 80/443?

- Is my diagnostic correct ? (at least, does it seems to be...)

- (shall I get another device? Update to alternative firmware project?)
 
PS : I could be asked for ifconfig/netstats/hdw-fmw version, I would post later as I do not have access now.Looks like to me it is recurrent issue on WRT54g (maybe I'm wrong and just an **bleep** in LAN/WAN configuration which is highly possible)

View 3 Replies View Related

Linksys Wireless Router :: E4200 / Open Nat / Port Forward Xbox?

Aug 13, 2012

I'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Failed To Port Forward Properly

Apr 5, 2012

A while back, I had my own minecraft server running. I had everything working and it was flawless. Then for some reason it just stopped working. I was Unable to open ANY PORTS. I did happen to try 65 - 110 and 254 - 210, as well as 12, 212 and 122. I dopnt know what happened but i have been searching everywhere on the internet (roughly 3 months)

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Forward Port 5900

Sep 27, 2012

I think i have tried everything i could think of to forward port 5900 with no luck. iIhave e4200. it is for RealVNC application. I followed steps from here: i have windows 7 and nortonn internet security. i disabled the firewall and added a rule to forward port 5900 in windows but did not work either.

View 9 Replies View Related

Linksys Wireless Router :: WRVS4400N Port Forward Is Not Working To FTP Service

Feb 17, 2012

I've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.

View 1 Replies View Related

Linksys Wireless Router :: Port Forward With E1200 / IPv4 Address

Apr 22, 2013

I'm trying to set up a minecraft server i have the correct ipv4 adress and port but for some reason its still closed?

View 7 Replies View Related

Linksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?

Oct 12, 2012

Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?

View 1 Replies View Related

Linksys Wireless Router :: Port Forward With EA4500 Cloud Connect Firmware?

Jul 11, 2012

Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389.  In the old web admin page this option was easy to find and change.  with the new cloud connect I can't find it.  how do Ienable port forwarding on the EA4500? 

View 3 Replies View Related

Linksys Wireless Router :: Cisco E3000 Port Forward Settings Won't Save

Nov 28, 2011

i am trying to port forward my router so that i can run a minecraft server.  When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't.  I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds.  None of this works. 

View 2 Replies View Related

Port Forward A Minecraft Server?

Sep 6, 2011

Im trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.

NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:

admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)

None of these work i even tried typing the name name and password of my router. No luck?

View 7 Replies View Related

Linksys Router Unable To Forward Port 80 / 443

Jan 19, 2013

I have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.

View 1 Replies View Related

Cisco WAN :: Forward TCP Port To Server On LAN - 5510

Jul 2, 2012

I need to forward traffic from an Amazon server to an internal server with a SQL database on it so need to forward TCP 1433 to an internal IP (192.168.252.43) I have created an access rule to allow the amazon IPP through on 1433 but I am unsure how to point the traffic to the SQL server on the LAN.
 
I expect I will need to create a NAT rule to do this but cannot see how to achieve it.
 
I have another problem concerning a site to site VPN which establishes OK but does not pass traffic, I will post that question separately.

View 2 Replies View Related

Linksys Wired Router :: BEFSR41v3 Need To Forward A Port

Feb 12, 2012

i Have a router called Linksys BEFSR41v3 i need to port forward a port but it just wont open i loggerd in on my router using 192.168.1.1 after i click applications & gaming started the port on 100 and ended on 100 used ipconfig in cmd to find me ipv4 adres and putted in ip adress box also both protocol are on and i clicked the enabled function also i tried also got a static ip i used canyouseeme.org to cheak if my port is open it still says its not open.

View 9 Replies View Related

Cisco WAN :: 877w Port Forward 80 And 443 To Internal Server

Feb 21, 2012

I'm new to the Cisco world and have so far got internet and VPN working (without SDM) using the IOS commands.I have hit a stubling block with port forwarding ports 80 (http) and 443 (https) to my small business server for outlook web access.I need to forward port 80 and 442 to internal LAN server 192.168.10.1.The Cisco 877 has a local IP address of 192.168.10.254. [code]

View 6 Replies View Related

Routers / Switches :: Linksys E3000 Router Will Not Forward Port 443

Dec 20, 2011

I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.

View 8 Replies View Related

Linksys Wireless Router :: EA2700 Port Of Local Computer Or Port Of Server

Nov 21, 2012

I want to use Qos in EA2700. I want to know whether the port in the Qos means the port of local computer or the port of server.  Or is it a source port or a destination port?

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 Will Not Save Port Forward Info?

May 17, 2011

BEFSR81 will not save port forward info.  I am trying to setup port forwarding for xbox (53, 80, 88, 1863, 3074), I click on enable to the far right and then click save at the bottom.  It says settings are succeful, will return in 5 seconds.  When it returns everything is zeroed out.

View 3 Replies View Related

Cisco Switching/Routing :: Port Forward To HTTP Server 3745

Apr 18, 2012

I need getting access to my http server.  I have a host name that I configured to point to my IPS IP address.  Port 80 is enabled on my server, but I can't seem to get access it from my web address [code]

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N How To Set Port Forward

Mar 2, 2011

I Just bought this Linksys Modem/Router and i still can´t believe that my cheap dlink DIR600 or my OLD SAGEMCOM can set IP to all my machines but this WAG120N cant!and Worse,  how will i set port forward if i don't know which IP the machine will get?is there any firmware or MAGIC ??

View 4 Replies View Related

TP-Link Dual-Band Wireless :: Port Forward Through TD-8817 Modem > TL-WDR-3600 Router > PC?

Mar 13, 2013

Region : Ireland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Smart

I have

A TP-Link TD-8817 Modem with IP Address 192.168.1.1
A TP-Link TL-WDR-3600 Router with IP Address 192.168.0.1
A PC with IP Address 192.168.0.100

I figured out that I can only enter an IP Address with the range 192.168.1.* when port forwarding on the modem, ie I cant enter 192.168.0.100 for the PC.Is there any way of Port Forwarding to the PC?

View 2 Replies View Related

Linksys Wireless Router :: Setting Up FTP Server To Share E1550 USB Port?

Apr 9, 2012

So, what I essentially want to do is share the device connected to the back of my router so that I can remotely access it over the internet. Much like the manual says you can do.
 
But I'm having trouble. I've currently got the port set at 38, but the website never loads.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Port Forwarding For Http To A Web Server

Jan 7, 2013

I recently bought a EA6500 to replace a EA4500 (defective). Prior to the EA4500 I had a 160N which I now use as a WAP for 801.11G devices. I thought the 4500 was good from the media server functions it offered.However since installing the 6500 I noticed:
 
1. I have port forwarding for http to a web server. It works fine from machines on the outside but from my local subnet 192.168.1.x I can't access the web server (I can't even ping the external address - and yes I turned the anonymous filter off). I am not using ddns and I have a static ip address (cable modem connected) to the outside world.

View 2 Replies View Related

Port Forward Through 2 Routers - Linksys E1000 / Westell 7500

Feb 20, 2012

I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.

View 2 Replies View Related

Linksys Cable / DSL :: Wrt54gx4 - Dhcp Setting And Port Forward?

Feb 18, 2012

dhcp setting and port forward

View 3 Replies View Related

Linksys Wireless Router :: Port Forwarding For Video Streaming Server On E2500?

Feb 4, 2013

So I am trying to forward a port on my linksys E2500 router. I need to forward 198.162.17.3 for a video streaming server.  When I go to the admin panel I am only able to change the last digit, ie 198.162.1.x   

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved