Linksys Cable / DSL :: Wrt54gx4 - Dhcp Setting And Port Forward?
Feb 18, 2012dhcp setting and port forward
View 3 Replies
ADVERTISEMENT
Linksys Cable / DSL :: WAG120N How To Set Port Forward
Mar 2, 2011I Just bought this Linksys Modem/Router and i still can´t believe that my cheap dlink DIR600 or my OLD SAGEMCOM can set IP to all my machines but this WAG120N cant!and Worse, how will i set port forward if i don't know which IP the machine will get?is there any firmware or MAGIC ??
View 4 Replies View RelatedLinksys Cable / DSL :: X3000 Doesn't Save Port Forward Rules?
Mar 14, 2012over my port forward GUI in my new linksys x3000. When I try to save any new port forward rules (new or using predefined), the setting are not saved when I get back to the configuration screen again. Nothing seems to get configured.
Have just uppgraded firmware to v1.0.01, but no difference.
Linksys Cable / DSL :: DPC3825 Modem Remote Management Port Setting?
May 24, 2011I am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies View RelatedLinksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?
Oct 12, 2012Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedLinksys Router Unable To Forward Port 80 / 443
Jan 19, 2013I have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.
View 1 Replies View RelatedLinksys Wireless Router :: Connecting WRT54GX4 To Network
Feb 21, 2012I want to add some wifi to our small office. I have a WRT54GX4 wireless router. I would like to have it be part of our 192.168.0.0 network. I manually changed the address of the WRT54GX4 to 192.168.0.50 (an open address) and gave it a range of 25 addresses 192.168.0.51-192.168.0.75. I changed the SSID from "linksys" to something different. I added a WPA2 Personal code. I also changed the admin password from "admin". I did all of this on a laptop connected to the router with an ethernet cable into port 1 on the router with wifi "off" on the laptop. I disconnected this and plugged one end of the ethernet cable into an open port on a switch in our rack and moved the other end from port 1 to the internet port on the router. I connected to the router wirelessly with my iPad. I was able to connect to the router and log into the router but I'm not getting any internet connection.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54GX4 Link Not Working?
Feb 27, 2013WRT54GX4 Wireless link not working
View 2 Replies View RelatedLinksys Wireless Router :: Wrt54gx4 Not Being Used - Signal Won't Reach
Jul 3, 2011I have DSL set up in a home network. I want it to be used in my barn. The signal won't reach wireless though. I have 2 older wireless routers not being used - Lynksys wrt54gx4. Can I add two of these in the path to the barn to extend the signal? I would put one in the back of the house and one halfway to the barn in the pool house. ZCan these routers connect wirelessly to the home network?
View 3 Replies View RelatedLinksys Wireless Router :: E1000 Can't Forward A Port
May 15, 2013I have my router set up and life was good. i now want to forward a port. i go into apllications/gaming put the application name, the port i want to forward and click enable. Save changes and i get a changes save message. When the browser goes back to the applications/gaming screen no port shows as being forwarded. If i go to canyouseemenow.org the port shows as being closed.
View 3 Replies View RelatedLinksys Wireless Router :: How To Port Forward An EA3500
Aug 7, 2012Windows 7 64 bit / Linksys EA3500 / (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500?
View 2 Replies View RelatedLinksys Wired Router :: BEFSR41v3 Need To Forward A Port
Feb 12, 2012i Have a router called Linksys BEFSR41v3 i need to port forward a port but it just wont open i loggerd in on my router using 192.168.1.1 after i click applications & gaming started the port on 100 and ended on 100 used ipconfig in cmd to find me ipv4 adres and putted in ip adress box also both protocol are on and i clicked the enabled function also i tried also got a static ip i used canyouseeme.org to cheak if my port is open it still says its not open.
View 9 Replies View RelatedLinksys Wireless Router :: Wrt310N - Trying To Forward A Port?
Nov 25, 2011Having a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.
View 2 Replies View RelatedLinksys Wireless Router :: Wrt54gx4 Can't Connect To Internet By PPPoe
Feb 18, 2012I am using wrt54gx4. I have a IP camera connected to it. I can view the live images on the intranet and internet. Not too long ago my DSL company upgraded my DSL modem to a newer model. Then I can not connect to the internet by PPPoe. DHCP is fine. So the only connection type works is DHCP. But now I can not view the live images on the internet. I can only view the live images on intranet( I mean if I open web browser and type url.. is the port, I can view the live image).
View 1 Replies View RelatedRouters / Switches :: Linksys E3000 Router Will Not Forward Port 443
Dec 20, 2011I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View RelatedPort Forward Through 2 Routers - Linksys E1000 / Westell 7500
Feb 20, 2012I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 - Port Forward To Broadcast For WOL?
Jan 25, 2011Some routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G Port 80 Forward Fails
Sep 2, 2011I encounter a problem setting up port 80 forwarding on WRT54g router.
Configuration:
- Numericable modem
- WRT54G router : portforwarding configured, accepting anonymous internet traffic, no DMZ, no port-triggering... in fact everything is fine except for ports 80/443
- Linux Ubuntu server + Apache2 listening *:80 and/or *:15001
1/ Situation 1: Apache listening on server's *:15001
-> Accessing from Internet (outside LAN) works very fine.
-> Portforwarding of router:15001 to server:15001 (TCP) works fine.
2/ Situation 2: Apache listening on server *:80
-> Accessing from Internet (outside LAN) FAILS.
-> Portforwarding of router:80 to server:80 (TCP) doesn't work. Diagnostic using the client machine's firewall tool showed the request doesn't get any return... no traffic back at all.
The system being fully operational when using port:15001 shows the problem does not come from server configuration.I still have to try a bypass of my router by plugging the modem directly on the server eth card.
-> If that works it would definitely prove the problem comes from the router, precisely the portforwarding feature as applied to port:80.
My guess is the following:
- As WRT54g router's remote administration interface is precisely set to listen 80/443 ports.
- As I still did not disable remote administration as I need it, but I will come to such extremities (very soon in fact as despair is gaining me
- Looks like WRT54g is unable to forward port 80 as this is it's remote administration port. You can set it up, but it just won't work, and there's no warning
Solutions?
- Disable remote administration? (will it work ? cause I would not risk to disable it for nothing...)
- Have remote administration litening on different ports than 80/443?
- Is my diagnostic correct ? (at least, does it seems to be...)
- (shall I get another device? Update to alternative firmware project?)
PS : I could be asked for ifconfig/netstats/hdw-fmw version, I would post later as I do not have access now.Looks like to me it is recurrent issue on WRT54g (maybe I'm wrong and just an **bleep** in LAN/WAN configuration which is highly possible)
Linksys Wireless Router :: WRT55AG V2 Cannot Port Forward To A Web Server
Mar 19, 2007I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off
View 3 Replies View RelatedWindows XP Professional 32bit - Forward Port 88 On Linksys WRT54G Version 6?
Mar 1, 2011I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.I'm trying to forward port 88 on my Linksys WRT54G Version 6.I tried that but Boardwave audio streaming server still says it's not open!Here are some pictures: I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
Linksys Wireless Router :: E4200 / Open Nat / Port Forward Xbox?
Aug 13, 2012I'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Failed To Port Forward Properly
Apr 5, 2012A while back, I had my own minecraft server running. I had everything working and it was flawless. Then for some reason it just stopped working. I was Unable to open ANY PORTS. I did happen to try 65 - 110 and 254 - 210, as well as 12, 212 and 122. I dopnt know what happened but i have been searching everywhere on the internet (roughly 3 months)
View 1 Replies View RelatedLinksys Wired Router :: BEFSR81 Will Not Save Port Forward Info?
May 17, 2011BEFSR81 will not save port forward info. I am trying to setup port forwarding for xbox (53, 80, 88, 1863, 3074), I click on enable to the far right and then click save at the bottom. It says settings are succeful, will return in 5 seconds. When it returns everything is zeroed out.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 - Unable To Forward Port 5900
Sep 27, 2012I think i have tried everything i could think of to forward port 5900 with no luck. iIhave e4200. it is for RealVNC application. I followed steps from here: i have windows 7 and nortonn internet security. i disabled the firewall and added a rule to forward port 5900 in windows but did not work either.
View 9 Replies View RelatedLinksys Wireless Router :: WRVS4400N Port Forward Is Not Working To FTP Service
Feb 17, 2012I've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.
View 1 Replies View RelatedLinksys Wireless Router :: Port Forward With E1200 / IPv4 Address
Apr 22, 2013I'm trying to set up a minecraft server i have the correct ipv4 adress and port but for some reason its still closed?
View 7 Replies View RelatedLinksys Wireless Router :: Port Forward With EA4500 Cloud Connect Firmware?
Jul 11, 2012Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389. In the old web admin page this option was easy to find and change. with the new cloud connect I can't find it. how do Ienable port forwarding on the EA4500?
View 3 Replies View RelatedLinksys Wireless Router :: Cisco E3000 Port Forward Settings Won't Save
Nov 28, 2011i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies View RelatedLinksys Wireless Router :: Setting WRT600N As A Second (downstream Non-DHCP)?
Sep 16, 2011I fought my ISP (frontier) for weeks trying to get their 7500 DSL/modem/router configured in bridge and working into the WRT600N. Finally gave up and put a new Engenius EVR100 behind the 7500 bridge and it came up fine in 10 mins. Now I would like to use my old WRT600N downstairs as a second router and run it in the range of the Engenius DHCP, with DHCP turned off in the WRT600N.
My question is this ... Do I set the WRT600N as a static IP address and use an address in the range issued by the EVR100?And, if so, what would the sub-net mask, default gateway and DNS numbers be? Also would the router address itself (lets say I use 192.168.0.120 from the EVR100 range) be different then the static IP address?
Linksys Cable / DSL :: Setting Up VPN On WAG320N?
Mar 2, 2011how to configure or set up VPN on WAG320N?
View 3 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?
Nov 18, 2012Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
Cisco Firewall :: How To Forward Hit Request On 5555 Port To 80 Port
Nov 7, 2011I have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]
View 5 Replies View RelatedLinksys Wireless Router :: WRT320N - Setting Up Static LAN & Custom DHCP Pool
Dec 18, 2012I'm following a tutorial that 'dumbs down' the modem and lets me use the router for everything.
It asks me to set up a static LAN IP (10.x.x.x range) and edit the DHCP pool of the router. When I'm logged in to the routers admin, it doesn't seem I'm able to do any of this.
Earlier in the tutorial it also asked me to set up a static IP for the router, which I did I suppose.
I've added a screenshot of the admin panel, in case that's relevant.